MIPS: PowerTV: Eliminate duplicate opcode definition macros

Change to different macros for assembler macros since the old names in
powertv_setup.c were co-opted for use in asm/asm.h. This broken the
build for the powertv platform. This patch introduces new macros based on
the new macros in asm.h to take the place of the old macro values.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
index 698b1eafbe98656764c1f49df51f3bcfac776975..af2cae0a5ab3ee44aa9810d31236be9462aadb90 100644 (file)
--- a/arch/mips/powertv/powertv_setup.c
+++ b/arch/mips/powertv/powertv_setup.c
@@ -25,14 +25,15 @@
 #include <linux/etherdevice.h>
 #include <linux/if_ether.h>
 #include <linux/ctype.h>
-
 #include <linux/cpu.h>
+#include <linux/time.h>
+
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
 #include <asm/dma.h>
-#include <linux/time.h>
+#include <asm/asm.h>
 #include <asm/traps.h>
 #include <asm/asm-offsets.h>
 #include "reset.h"
@@ -41,26 +42,21 @@
 
 /*
  * Macros for loading addresses and storing registers:
- * PTR_LA      Load the address into a register
- * LONG_S      Store the full width of the given register.
- * LONG_L      Load the full width of the given register
- * PTR_ADDIU   Add a constant value to a register used as a pointer
+ * LONG_L_     Stringified version of LONG_L for use in asm() statement
+ * LONG_S_     Stringified version of LONG_S for use in asm() statement
+ * PTR_LA_     Stringified version of PTR_LA for use in asm() statement
  * REG_SIZE    Number of 8-bit bytes in a full width register
  */
+#define LONG_L_                VAL(LONG_L) " "
+#define LONG_S_                VAL(LONG_S) " "
+#define PTR_LA_                VAL(PTR_LA) " "
+
 #ifdef CONFIG_64BIT
 #warning TODO: 64-bit code needs to be verified
-#define PTR_LA         "dla    "
-#define LONG_S         "sd     "
-#define LONG_L         "ld     "
-#define PTR_ADDIU      "daddiu "
 #define REG_SIZE       "8"             /* In bytes */
 #endif
 
 #ifdef CONFIG_32BIT
-#define PTR_LA         "la     "
-#define LONG_S         "sw     "
-#define LONG_L         "lw     "
-#define PTR_ADDIU      "addiu  "
 #define REG_SIZE       "4"             /* In bytes */
 #endif
 
@@ -113,9 +109,9 @@ static int panic_handler(struct notifier_block *notifier_block,
                 * structure. */
                __asm__ __volatile__ (
                        ".set   noat\n"
-                       LONG_S          "$at, %[at]\n"
-                       LONG_S          "$2, %[v0]\n"
-                       LONG_S          "$3, %[v1]\n"
+                       LONG_S_         "$at, %[at]\n"
+                       LONG_S_         "$2, %[v0]\n"
+                       LONG_S_         "$3, %[v1]\n"
                :
                        [at] "=m" (at),
                        [v0] "=m" (v0),
@@ -129,54 +125,54 @@ static int panic_handler(struct notifier_block *notifier_block,
                        "move           $at, %[pt_regs]\n"
 
                        /* Argument registers */
-                       LONG_S          "$4, " VAL(PT_R4) "($at)\n"
-                       LONG_S          "$5, " VAL(PT_R5) "($at)\n"
-                       LONG_S          "$6, " VAL(PT_R6) "($at)\n"
-                       LONG_S          "$7, " VAL(PT_R7) "($at)\n"
+                       LONG_S_         "$4, " VAL(PT_R4) "($at)\n"
+                       LONG_S_         "$5, " VAL(PT_R5) "($at)\n"
+                       LONG_S_         "$6, " VAL(PT_R6) "($at)\n"
+                       LONG_S_         "$7, " VAL(PT_R7) "($at)\n"
 
                        /* Temporary regs */
-                       LONG_S          "$8, " VAL(PT_R8) "($at)\n"
-                       LONG_S          "$9, " VAL(PT_R9) "($at)\n"
-                       LONG_S          "$10, " VAL(PT_R10) "($at)\n"
-                       LONG_S          "$11, " VAL(PT_R11) "($at)\n"
-                       LONG_S          "$12, " VAL(PT_R12) "($at)\n"
-                       LONG_S          "$13, " VAL(PT_R13) "($at)\n"
-                       LONG_S          "$14, " VAL(PT_R14) "($at)\n"
-                       LONG_S          "$15, " VAL(PT_R15) "($at)\n"
+                       LONG_S_         "$8, " VAL(PT_R8) "($at)\n"
+                       LONG_S_         "$9, " VAL(PT_R9) "($at)\n"
+                       LONG_S_         "$10, " VAL(PT_R10) "($at)\n"
+                       LONG_S_         "$11, " VAL(PT_R11) "($at)\n"
+                       LONG_S_         "$12, " VAL(PT_R12) "($at)\n"
+                       LONG_S_         "$13, " VAL(PT_R13) "($at)\n"
+                       LONG_S_         "$14, " VAL(PT_R14) "($at)\n"
+                       LONG_S_         "$15, " VAL(PT_R15) "($at)\n"
 
                        /* "Saved" registers */
-                       LONG_S          "$16, " VAL(PT_R16) "($at)\n"
-                       LONG_S          "$17, " VAL(PT_R17) "($at)\n"
-                       LONG_S          "$18, " VAL(PT_R18) "($at)\n"
-                       LONG_S          "$19, " VAL(PT_R19) "($at)\n"
-                       LONG_S          "$20, " VAL(PT_R20) "($at)\n"
-                       LONG_S          "$21, " VAL(PT_R21) "($at)\n"
-                       LONG_S          "$22, " VAL(PT_R22) "($at)\n"
-                       LONG_S          "$23, " VAL(PT_R23) "($at)\n"
+                       LONG_S_         "$16, " VAL(PT_R16) "($at)\n"
+                       LONG_S_         "$17, " VAL(PT_R17) "($at)\n"
+                       LONG_S_         "$18, " VAL(PT_R18) "($at)\n"
+                       LONG_S_         "$19, " VAL(PT_R19) "($at)\n"
+                       LONG_S_         "$20, " VAL(PT_R20) "($at)\n"
+                       LONG_S_         "$21, " VAL(PT_R21) "($at)\n"
+                       LONG_S_         "$22, " VAL(PT_R22) "($at)\n"
+                       LONG_S_         "$23, " VAL(PT_R23) "($at)\n"
 
                        /* Add'l temp regs */
-                       LONG_S          "$24, " VAL(PT_R24) "($at)\n"
-                       LONG_S          "$25, " VAL(PT_R25) "($at)\n"
+                       LONG_S_         "$24, " VAL(PT_R24) "($at)\n"
+                       LONG_S_         "$25, " VAL(PT_R25) "($at)\n"
 
                        /* Kernel temp regs */
-                       LONG_S          "$26, " VAL(PT_R26) "($at)\n"
-                       LONG_S          "$27, " VAL(PT_R27) "($at)\n"
+                       LONG_S_         "$26, " VAL(PT_R26) "($at)\n"
+                       LONG_S_         "$27, " VAL(PT_R27) "($at)\n"
 
                        /* Global pointer, stack pointer, frame pointer and
                         * return address */
-                       LONG_S          "$gp, " VAL(PT_R28) "($at)\n"
-                       LONG_S          "$sp, " VAL(PT_R29) "($at)\n"
-                       LONG_S          "$fp, " VAL(PT_R30) "($at)\n"
-                       LONG_S          "$ra, " VAL(PT_R31) "($at)\n"
+                       LONG_S_         "$gp, " VAL(PT_R28) "($at)\n"
+                       LONG_S_         "$sp, " VAL(PT_R29) "($at)\n"
+                       LONG_S_         "$fp, " VAL(PT_R30) "($at)\n"
+                       LONG_S_         "$ra, " VAL(PT_R31) "($at)\n"
 
                        /* Now we can get the $at and v0 registers back and
                         * store them */
-                       LONG_L          "$8, %[at]\n"
-                       LONG_S          "$8, " VAL(PT_R1) "($at)\n"
-                       LONG_L          "$8, %[v0]\n"
-                       LONG_S          "$8, " VAL(PT_R2) "($at)\n"
-                       LONG_L          "$8, %[v1]\n"
-                       LONG_S          "$8, " VAL(PT_R3) "($at)\n"
+                       LONG_L_         "$8, %[at]\n"
+                       LONG_S_         "$8, " VAL(PT_R1) "($at)\n"
+                       LONG_L_         "$8, %[v0]\n"
+                       LONG_S_         "$8, " VAL(PT_R2) "($at)\n"
+                       LONG_L_         "$8, %[v1]\n"
+                       LONG_S_         "$8, " VAL(PT_R3) "($at)\n"
                :
                :
                        [at] "m" (at),
@@ -191,8 +187,8 @@ static int panic_handler(struct notifier_block *notifier_block,
                __asm__ __volatile__ (
                        ".set   noat\n"
                "1:\n"
-                       PTR_LA          "$at, 1b\n"
-                       LONG_S          "$at, %[cp0_epc]\n"
+                       PTR_LA_         "$at, 1b\n"
+                       LONG_S_         "$at, %[cp0_epc]\n"
                :
                        [cp0_epc] "=m" (my_regs.cp0_epc)
                :