rtlwifi: rtl8192cu: fix error handle when usb probe failed

rtl_usb_probe() must do error handle rtl_deinit_core() only if
rtl_init_core() is done, otherwise goto error_out2.

| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
| rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl8192cu: Chip version 0x10
| rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl_usb: Too few input end points found
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
| Google 01/01/2011
| Workqueue: usb_hub_wq hub_event
| Call Trace:
|   __dump_stack lib/dump_stack.c:77 [inline]
|   dump_stack+0xe8/0x16e lib/dump_stack.c:113
|   assign_lock_key kernel/locking/lockdep.c:786 [inline]
|   register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
|   __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
|   lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
|   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
|   _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
|   rtl_c2hcmd_launcher+0xd1/0x390
| drivers/net/wireless/realtek/rtlwifi/base.c:2344
|   rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574
|   rtl_usb_probe.cold+0x861/0xa70
| drivers/net/wireless/realtek/rtlwifi/usb.c:1093
|   usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
|   generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
|   usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
|   hub_port_connect drivers/usb/core/hub.c:5089 [inline]
|   hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
|   port_event drivers/usb/core/hub.c:5350 [inline]
|   hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
|   process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
|   worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
|   kthread+0x313/0x420 kernel/kthread.c:253
|   ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index e24fda5e9087bc6c32b60e886f9554f566e8947b..34d68dbf4b4ce16cdc3c51569682b7649657f2fa 100644 (file)
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1064,13 +1064,13 @@ int rtl_usb_probe(struct usb_interface *intf,
        rtlpriv->cfg->ops->read_eeprom_info(hw);
        err = _rtl_usb_init(hw);
        if (err)
-               goto error_out;
+               goto error_out2;
        rtl_usb_init_sw(hw);
        /* Init mac80211 sw */
        err = rtl_init_core(hw);
        if (err) {
                pr_err("Can't allocate sw for mac80211\n");
-               goto error_out;
+               goto error_out2;
        }
        if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
                pr_err("Can't init_sw_vars\n");
@@ -1091,6 +1091,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 
 error_out:
        rtl_deinit_core(hw);
+error_out2:
        _rtl_usb_io_handler_release(hw);
        usb_put_dev(udev);
        complete(&rtlpriv->firmware_loading_complete);