]> git.baikalelectronics.ru Git - kernel.git/commitdiff
drm/i915/dsc: Enable and disable appropriate power wells for VDSC
authorManasi Navare <manasi.d.navare@intel.com>
Wed, 28 Nov 2018 20:26:24 +0000 (12:26 -0800)
committerManasi Navare <manasi.d.navare@intel.com>
Thu, 29 Nov 2018 20:31:36 +0000 (12:31 -0800)
A separate power well 2 (PG2) is required for VDSC on eDP transcoder
whereas all other transcoders use the power wells associated with the
transcoders for VDSC.
This patch adds a helper to obtain correct power domain depending on
transcoder being used and enables/disables the power wells during
VDSC enabling/disabling.

v4:
* Get VDSC power domain only if compression en is set
in crtc_state (Ville, Imre)
v3:
* Call it intel_dsc_power_domain, add to
intel_ddi_get_power_domains (Ville)
v2:
* Fix tabs, const crtc_state, fix comments (Ville)

Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128202628.20238-13-manasi.d.navare@intel.com
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_vdsc.c

index 339be10986d7784df5748490d64fde09fc193886..6533624226a7352955ee5b4ca633a5b9e2aaac85 100644 (file)
@@ -2154,6 +2154,12 @@ static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder,
            intel_port_is_tc(dev_priv, encoder->port))
                domains |= BIT_ULL(intel_ddi_main_link_aux_domain(dig_port));
 
+       /*
+        * VDSC power is needed when DSC is enabled
+        */
+       if (crtc_state->dsc_params.compression_enable)
+               domains |= BIT_ULL(intel_dsc_power_domain(crtc_state));
+
        return domains;
 }
 
index 36e756e1512497766ab5ec42b5f4ec8991bbd5dd..0623dc8ab115d112af369f72d7d8b63aa8ccc586 100644 (file)
@@ -1863,6 +1863,8 @@ uint8_t intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, int mode_clock,
 /* intel_vdsc.c */
 int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
                                struct intel_crtc_state *pipe_config);
+enum intel_display_power_domain
+intel_dsc_power_domain(const struct intel_crtc_state *crtc_state);
 
 static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
 {
index ec7444f0ca12a4b38f7a7b6658195b1c504dd33e..c56ba0e04044aea9bf68ecdd9fabfa4453b3bf64 100644 (file)
@@ -578,6 +578,24 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
        return intel_compute_rc_parameters(vdsc_cfg);
 }
 
+enum intel_display_power_domain
+intel_dsc_power_domain(const struct intel_crtc_state *crtc_state)
+{
+       enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+       /*
+        * On ICL VDSC/joining for eDP transcoder uses a separate power well PW2
+        * This requires POWER_DOMAIN_TRANSCODER_EDP_VDSC power domain.
+        * For any other transcoder, VDSC/joining uses the power well associated
+        * with the pipe/transcoder in use. Hence another reference on the
+        * transcoder power domain will suffice.
+        */
+       if (cpu_transcoder == TRANSCODER_EDP)
+               return POWER_DOMAIN_TRANSCODER_EDP_VDSC;
+       else
+               return POWER_DOMAIN_TRANSCODER(cpu_transcoder);
+}
+
 static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
                                                const struct intel_crtc_state *crtc_state)
 {
@@ -1010,6 +1028,10 @@ void intel_dsc_enable(struct intel_encoder *encoder,
        if (!crtc_state->dsc_params.compression_enable)
                return;
 
+       /* Enable Power wells for VDSC/joining */
+       intel_display_power_get(dev_priv,
+                               intel_dsc_power_domain(crtc_state));
+
        intel_configure_pps_for_dsc_encoder(encoder, crtc_state);
 
        intel_dp_write_dsc_pps_sdp(encoder, crtc_state);
@@ -1059,4 +1081,8 @@ void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
                dss_ctl2_val &= ~(LEFT_BRANCH_VDSC_ENABLE |
                                  RIGHT_BRANCH_VDSC_ENABLE);
        I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
+
+       /* Disable Power wells for VDSC/joining */
+       intel_display_power_put(dev_priv,
+                               intel_dsc_power_domain(old_crtc_state));
 }