]> git.baikalelectronics.ru Git - kernel.git/commitdiff
smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver
authorSteve Glendinning <steve.glendinning@smsc.com>
Tue, 16 Mar 2010 08:46:46 +0000 (08:46 +0000)
committerDavid S. Miller <davem@davemloft.net>
Tue, 16 Mar 2010 21:15:42 +0000 (14:15 -0700)
This patch adds a driver for SMSC's LAN7500 family of USB 2.0
to gigabit ethernet adapters.  It's loosely based on the smsc95xx
driver but the device registers for LAN7500 are completely different.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/usb/Kconfig
drivers/net/usb/Makefile
drivers/net/usb/smsc75xx.c [new file with mode: 0644]
drivers/net/usb/smsc75xx.h [new file with mode: 0644]

index 32d93564a74d4839207fef67859c7bc1f967e3e7..ba56ce4382d9246969d672c299cb7f61dea45abd 100644 (file)
@@ -204,6 +204,14 @@ config USB_NET_DM9601
          This option adds support for Davicom DM9601 based USB 1.1
          10/100 Ethernet adapters.
 
+config USB_NET_SMSC75XX
+       tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
+       depends on USB_USBNET
+       select CRC32
+       help
+         This option adds support for SMSC LAN95XX based USB 2.0
+         Gigabit Ethernet adapters.
+
 config USB_NET_SMSC95XX
        tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
        depends on USB_USBNET
index e17afb78f37220df2c8c6a13eb420aa14280fd09..82ea62955b56e5188b272bdb071decc44c5da06c 100644 (file)
@@ -11,6 +11,7 @@ obj-$(CONFIG_USB_NET_AX8817X) += asix.o
 obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
 obj-$(CONFIG_USB_NET_CDC_EEM)  += cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)   += dm9601.o
+obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
 obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
 obj-$(CONFIG_USB_NET_GL620A)   += gl620a.o
 obj-$(CONFIG_USB_NET_NET1080)  += net1080.o
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
new file mode 100644 (file)
index 0000000..300e3e7
--- /dev/null
@@ -0,0 +1,1288 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include "smsc75xx.h"
+
+#define SMSC_CHIPNAME                  "smsc75xx"
+#define SMSC_DRIVER_VERSION            "1.0.0"
+#define HS_USB_PKT_SIZE                        (512)
+#define FS_USB_PKT_SIZE                        (64)
+#define DEFAULT_HS_BURST_CAP_SIZE      (16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE      (6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY          (0x00002000)
+#define MAX_SINGLE_PACKET_SIZE         (9000)
+#define LAN75XX_EEPROM_MAGIC           (0x7500)
+#define EEPROM_MAC_OFFSET              (0x01)
+#define DEFAULT_TX_CSUM_ENABLE         (true)
+#define DEFAULT_RX_CSUM_ENABLE         (true)
+#define DEFAULT_TSO_ENABLE             (true)
+#define SMSC75XX_INTERNAL_PHY_ID       (1)
+#define SMSC75XX_TX_OVERHEAD           (8)
+#define MAX_RX_FIFO_SIZE               (20 * 1024)
+#define MAX_TX_FIFO_SIZE               (12 * 1024)
+#define USB_VENDOR_ID_SMSC             (0x0424)
+#define USB_PRODUCT_ID_LAN7500         (0x7500)
+#define USB_PRODUCT_ID_LAN7505         (0x7505)
+
+#define check_warn(ret, fmt, args...) \
+       ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
+
+#define check_warn_return(ret, fmt, args...) \
+       ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
+
+#define check_warn_goto_done(ret, fmt, args...) \
+       ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
+
+struct smsc75xx_priv {
+       struct usbnet *dev;
+       u32 rfe_ctl;
+       u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
+       bool use_rx_csum;
+       struct mutex dataport_mutex;
+       spinlock_t rfe_ctl_lock;
+       struct work_struct set_multicast;
+};
+
+struct usb_context {
+       struct usb_ctrlrequest req;
+       struct usbnet *dev;
+};
+
+static int turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
+                                         u32 *data)
+{
+       u32 *buf = kmalloc(4, GFP_KERNEL);
+       int ret;
+
+       BUG_ON(!dev);
+
+       if (!buf)
+               return -ENOMEM;
+
+       ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+               USB_VENDOR_REQUEST_READ_REGISTER,
+               USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+               00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
+
+       if (unlikely(ret < 0))
+               netdev_warn(dev->net,
+                       "Failed to read register index 0x%08x", index);
+
+       le32_to_cpus(buf);
+       *data = *buf;
+       kfree(buf);
+
+       return ret;
+}
+
+static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
+                                          u32 data)
+{
+       u32 *buf = kmalloc(4, GFP_KERNEL);
+       int ret;
+
+       BUG_ON(!dev);
+
+       if (!buf)
+               return -ENOMEM;
+
+       *buf = data;
+       cpu_to_le32s(buf);
+
+       ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+               USB_VENDOR_REQUEST_WRITE_REGISTER,
+               USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+               00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
+
+       if (unlikely(ret < 0))
+               netdev_warn(dev->net,
+                       "Failed to write register index 0x%08x", index);
+
+       kfree(buf);
+
+       return ret;
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
+{
+       unsigned long start_time = jiffies;
+       u32 val;
+       int ret;
+
+       do {
+               ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
+               check_warn_return(ret, "Error reading MII_ACCESS");
+
+               if (!(val & MII_ACCESS_BUSY))
+                       return 0;
+       } while (!time_after(jiffies, start_time + HZ));
+
+       return -EIO;
+}
+
+static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       u32 val, addr;
+       int ret;
+
+       mutex_lock(&dev->phy_mutex);
+
+       /* confirm MII not busy */
+       ret = smsc75xx_phy_wait_not_busy(dev);
+       check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
+
+       /* set the address, index & direction (read from PHY) */
+       phy_id &= dev->mii.phy_id_mask;
+       idx &= dev->mii.reg_num_mask;
+       addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+               | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+               | MII_ACCESS_READ;
+       ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+       check_warn_goto_done(ret, "Error writing MII_ACCESS");
+
+       ret = smsc75xx_phy_wait_not_busy(dev);
+       check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
+
+       ret = smsc75xx_read_reg(dev, MII_DATA, &val);
+       check_warn_goto_done(ret, "Error reading MII_DATA");
+
+       ret = (u16)(val & 0xFFFF);
+
+done:
+       mutex_unlock(&dev->phy_mutex);
+       return ret;
+}
+
+static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+                               int regval)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       u32 val, addr;
+       int ret;
+
+       mutex_lock(&dev->phy_mutex);
+
+       /* confirm MII not busy */
+       ret = smsc75xx_phy_wait_not_busy(dev);
+       check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
+
+       val = regval;
+       ret = smsc75xx_write_reg(dev, MII_DATA, val);
+       check_warn_goto_done(ret, "Error writing MII_DATA");
+
+       /* set the address, index & direction (write to PHY) */
+       phy_id &= dev->mii.phy_id_mask;
+       idx &= dev->mii.reg_num_mask;
+       addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+               | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+               | MII_ACCESS_WRITE;
+       ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+       check_warn_goto_done(ret, "Error writing MII_ACCESS");
+
+       ret = smsc75xx_phy_wait_not_busy(dev);
+       check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
+
+done:
+       mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc75xx_wait_eeprom(struct usbnet *dev)
+{
+       unsigned long start_time = jiffies;
+       u32 val;
+       int ret;
+
+       do {
+               ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+               check_warn_return(ret, "Error reading E2P_CMD");
+
+               if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
+                       break;
+               udelay(40);
+       } while (!time_after(jiffies, start_time + HZ));
+
+       if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
+               netdev_warn(dev->net, "EEPROM read operation timeout");
+               return -EIO;
+       }
+
+       return 0;
+}
+
+static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+       unsigned long start_time = jiffies;
+       u32 val;
+       int ret;
+
+       do {
+               ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+               check_warn_return(ret, "Error reading E2P_CMD");
+
+               if (!(val & E2P_CMD_BUSY))
+                       return 0;
+
+               udelay(40);
+       } while (!time_after(jiffies, start_time + HZ));
+
+       netdev_warn(dev->net, "EEPROM is busy");
+       return -EIO;
+}
+
+static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+                               u8 *data)
+{
+       u32 val;
+       int i, ret;
+
+       BUG_ON(!dev);
+       BUG_ON(!data);
+
+       ret = smsc75xx_eeprom_confirm_not_busy(dev);
+       if (ret)
+               return ret;
+
+       for (i = 0; i < length; i++) {
+               val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
+               ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+               check_warn_return(ret, "Error writing E2P_CMD");
+
+               ret = smsc75xx_wait_eeprom(dev);
+               if (ret < 0)
+                       return ret;
+
+               ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
+               check_warn_return(ret, "Error reading E2P_DATA");
+
+               data[i] = val & 0xFF;
+               offset++;
+       }
+
+       return 0;
+}
+
+static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+                                u8 *data)
+{
+       u32 val;
+       int i, ret;
+
+       BUG_ON(!dev);
+       BUG_ON(!data);
+
+       ret = smsc75xx_eeprom_confirm_not_busy(dev);
+       if (ret)
+               return ret;
+
+       /* Issue write/erase enable command */
+       val = E2P_CMD_BUSY | E2P_CMD_EWEN;
+       ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+       check_warn_return(ret, "Error writing E2P_CMD");
+
+       ret = smsc75xx_wait_eeprom(dev);
+       if (ret < 0)
+               return ret;
+
+       for (i = 0; i < length; i++) {
+
+               /* Fill data register */
+               val = data[i];
+               ret = smsc75xx_write_reg(dev, E2P_DATA, val);
+               check_warn_return(ret, "Error writing E2P_DATA");
+
+               /* Send "write" command */
+               val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
+               ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+               check_warn_return(ret, "Error writing E2P_CMD");
+
+               ret = smsc75xx_wait_eeprom(dev);
+               if (ret < 0)
+                       return ret;
+
+               offset++;
+       }
+
+       return 0;
+}
+
+static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
+{
+       int i, ret;
+
+       for (i = 0; i < 100; i++) {
+               u32 dp_sel;
+               ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+               check_warn_return(ret, "Error reading DP_SEL");
+
+               if (dp_sel & DP_SEL_DPRDY)
+                       return 0;
+
+               udelay(40);
+       }
+
+       netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
+
+       return -EIO;
+}
+
+static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
+                                  u32 length, u32 *buf)
+{
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+       u32 dp_sel;
+       int i, ret;
+
+       mutex_lock(&pdata->dataport_mutex);
+
+       ret = smsc75xx_dataport_wait_not_busy(dev);
+       check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
+
+       ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+       check_warn_goto_done(ret, "Error reading DP_SEL");
+
+       dp_sel &= ~DP_SEL_RSEL;
+       dp_sel |= ram_select;
+       ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
+       check_warn_goto_done(ret, "Error writing DP_SEL");
+
+       for (i = 0; i < length; i++) {
+               ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
+               check_warn_goto_done(ret, "Error writing DP_ADDR");
+
+               ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
+               check_warn_goto_done(ret, "Error writing DP_DATA");
+
+               ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
+               check_warn_goto_done(ret, "Error writing DP_CMD");
+
+               ret = smsc75xx_dataport_wait_not_busy(dev);
+               check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
+       }
+
+done:
+       mutex_unlock(&pdata->dataport_mutex);
+       return ret;
+}
+
+/* returns hash bit number for given MAC address */
+static u32 smsc75xx_hash(char addr[ETH_ALEN])
+{
+       return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
+}
+
+static void smsc75xx_deferred_multicast_write(struct work_struct *param)
+{
+       struct smsc75xx_priv *pdata =
+               container_of(param, struct smsc75xx_priv, set_multicast);
+       struct usbnet *dev = pdata->dev;
+       int ret;
+
+       netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
+               pdata->rfe_ctl);
+
+       smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
+               DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
+
+       ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+       check_warn(ret, "Error writing RFE_CRL");
+}
+
+static void smsc75xx_set_multicast(struct net_device *netdev)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+       unsigned long flags;
+       int i;
+
+       spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+       pdata->rfe_ctl &=
+               ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
+       pdata->rfe_ctl |= RFE_CTL_AB;
+
+       for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
+               pdata->multicast_hash_table[i] = 0;
+
+       if (dev->net->flags & IFF_PROMISC) {
+               netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
+               pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
+       } else if (dev->net->flags & IFF_ALLMULTI) {
+               netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
+               pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
+       } else if (!netdev_mc_empty(dev->net)) {
+               struct dev_mc_list *mc_list;
+
+               netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
+
+               pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
+
+               netdev_for_each_mc_addr(mc_list, netdev) {
+                       u32 bitnum = smsc75xx_hash(mc_list->dmi_addr);
+                       pdata->multicast_hash_table[bitnum / 32] |=
+                               (1 << (bitnum % 32));
+               }
+       } else {
+               netif_dbg(dev, drv, dev->net, "receive own packets only");
+               pdata->rfe_ctl |= RFE_CTL_DPF;
+       }
+
+       spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+       /* defer register writes to a sleepable context */
+       schedule_work(&pdata->set_multicast);
+}
+
+static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
+                                           u16 lcladv, u16 rmtadv)
+{
+       u32 flow = 0, fct_flow = 0;
+       int ret;
+
+       if (duplex == DUPLEX_FULL) {
+               u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+               if (cap & FLOW_CTRL_TX) {
+                       flow = (FLOW_TX_FCEN | 0xFFFF);
+                       /* set fct_flow thresholds to 20% and 80% */
+                       fct_flow = (8 << 8) | 32;
+               }
+
+               if (cap & FLOW_CTRL_RX)
+                       flow |= FLOW_RX_FCEN;
+
+               netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
+                       (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+                       (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+       } else {
+               netif_dbg(dev, link, dev->net, "half duplex");
+       }
+
+       ret = smsc75xx_write_reg(dev, FLOW, flow);
+       check_warn_return(ret, "Error writing FLOW");
+
+       ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
+       check_warn_return(ret, "Error writing FCT_FLOW");
+
+       return 0;
+}
+
+static int smsc75xx_link_reset(struct usbnet *dev)
+{
+       struct mii_if_info *mii = &dev->mii;
+       struct ethtool_cmd ecmd;
+       u16 lcladv, rmtadv;
+       int ret;
+
+       /* clear interrupt status */
+       ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
+       check_warn_return(ret, "Error reading PHY_INT_SRC");
+
+       ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+       check_warn_return(ret, "Error writing INT_STS");
+
+       mii_check_media(mii, 1, 1);
+       mii_ethtool_gset(&dev->mii, &ecmd);
+       lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
+       rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
+
+       netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x"
+               " rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+
+       return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
+}
+
+static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
+{
+       u32 intdata;
+
+       if (urb->actual_length != 4) {
+               netdev_warn(dev->net,
+                       "unexpected urb length %d", urb->actual_length);
+               return;
+       }
+
+       memcpy(&intdata, urb->transfer_buffer, 4);
+       le32_to_cpus(&intdata);
+
+       netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
+
+       if (intdata & INT_ENP_PHY_INT)
+               usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+       else
+               netdev_warn(dev->net,
+                       "unexpected interrupt, intdata=0x%08X", intdata);
+}
+
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_rx_csum_offload(struct usbnet *dev)
+{
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+       unsigned long flags;
+       int ret;
+
+       spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+       if (pdata->use_rx_csum)
+               pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+       else
+               pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+       spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+       ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+       check_warn_return(ret, "Error writing RFE_CTL");
+
+       return 0;
+}
+
+static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+       return MAX_EEPROM_SIZE;
+}
+
+static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
+                                      struct ethtool_eeprom *ee, u8 *data)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+
+       ee->magic = LAN75XX_EEPROM_MAGIC;
+
+       return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
+                                      struct ethtool_eeprom *ee, u8 *data)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+
+       if (ee->magic != LAN75XX_EEPROM_MAGIC) {
+               netdev_warn(dev->net,
+                       "EEPROM: magic value mismatch: 0x%x", ee->magic);
+               return -EINVAL;
+       }
+
+       return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+       return pdata->use_rx_csum;
+}
+
+static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+       pdata->use_rx_csum = !!val;
+
+       return smsc75xx_set_rx_csum_offload(dev);
+}
+
+static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data)
+{
+       if (data)
+               netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+       else
+               netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+       return 0;
+}
+
+static const struct ethtool_ops smsc75xx_ethtool_ops = {
+       .get_link       = usbnet_get_link,
+       .nway_reset     = usbnet_nway_reset,
+       .get_drvinfo    = usbnet_get_drvinfo,
+       .get_msglevel   = usbnet_get_msglevel,
+       .set_msglevel   = usbnet_set_msglevel,
+       .get_settings   = usbnet_get_settings,
+       .set_settings   = usbnet_set_settings,
+       .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
+       .get_eeprom     = smsc75xx_ethtool_get_eeprom,
+       .set_eeprom     = smsc75xx_ethtool_set_eeprom,
+       .get_tx_csum    = ethtool_op_get_tx_csum,
+       .set_tx_csum    = ethtool_op_set_tx_hw_csum,
+       .get_rx_csum    = smsc75xx_ethtool_get_rx_csum,
+       .set_rx_csum    = smsc75xx_ethtool_set_rx_csum,
+       .get_tso        = ethtool_op_get_tso,
+       .set_tso        = smsc75xx_ethtool_set_tso,
+};
+
+static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+
+       if (!netif_running(netdev))
+               return -EINVAL;
+
+       return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void smsc75xx_init_mac_address(struct usbnet *dev)
+{
+       /* try reading mac address from EEPROM */
+       if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+                       dev->net->dev_addr) == 0) {
+               if (is_valid_ether_addr(dev->net->dev_addr)) {
+                       /* eeprom values are valid so use them */
+                       netif_dbg(dev, ifup, dev->net,
+                               "MAC address read from EEPROM");
+                       return;
+               }
+       }
+
+       /* no eeprom, or eeprom values are invalid. generate random MAC */
+       random_ether_addr(dev->net->dev_addr);
+       netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
+}
+
+static int smsc75xx_set_mac_address(struct usbnet *dev)
+{
+       u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+               dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+       u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+
+       int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
+       check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
+
+       ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
+       check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
+
+       addr_hi |= ADDR_FILTX_FB_VALID;
+       ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
+       check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
+
+       ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
+       check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
+
+       return 0;
+}
+
+static int smsc75xx_phy_initialize(struct usbnet *dev)
+{
+       int bmcr, timeout = 0;
+
+       /* Initialize MII structure */
+       dev->mii.dev = dev->net;
+       dev->mii.mdio_read = smsc75xx_mdio_read;
+       dev->mii.mdio_write = smsc75xx_mdio_write;
+       dev->mii.phy_id_mask = 0x1f;
+       dev->mii.reg_num_mask = 0x1f;
+       dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
+
+       /* reset phy and wait for reset to complete */
+       smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+       do {
+               msleep(10);
+               bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+               check_warn_return(bmcr, "Error reading MII_BMCR");
+               timeout++;
+       } while ((bmcr & MII_BMCR) && (timeout < 100));
+
+       if (timeout >= 100) {
+               netdev_warn(dev->net, "timeout on PHY Reset");
+               return -EIO;
+       }
+
+       smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+               ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+               ADVERTISE_PAUSE_ASYM);
+
+       /* read to clear */
+       smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+       check_warn_return(bmcr, "Error reading PHY_INT_SRC");
+
+       smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
+               PHY_INT_MASK_DEFAULT);
+       mii_nway_restart(&dev->mii);
+
+       netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+       return 0;
+}
+
+static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
+{
+       int ret = 0;
+       u32 buf;
+       bool rxenabled;
+
+       ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+       check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+
+       rxenabled = ((buf & MAC_RX_RXEN) != 0);
+
+       if (rxenabled) {
+               buf &= ~MAC_RX_RXEN;
+               ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+               check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+       }
+
+       /* add 4 to size for FCS */
+       buf &= ~MAC_RX_MAX_SIZE;
+       buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
+
+       ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+       check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+
+       if (rxenabled) {
+               buf |= MAC_RX_RXEN;
+               ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+               check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+       }
+
+       return 0;
+}
+
+static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+
+       int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+       check_warn_return(ret, "Failed to set mac rx frame length");
+
+       return usbnet_change_mtu(netdev, new_mtu);
+}
+
+static int smsc75xx_reset(struct usbnet *dev)
+{
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+       u32 buf;
+       int ret = 0, timeout;
+
+       netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
+
+       ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+       check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+       buf |= HW_CFG_LRST;
+
+       ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+       check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+       timeout = 0;
+       do {
+               msleep(10);
+               ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+               check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+               timeout++;
+       } while ((buf & HW_CFG_LRST) && (timeout < 100));
+
+       if (timeout >= 100) {
+               netdev_warn(dev->net, "timeout on completion of Lite Reset");
+               return -EIO;
+       }
+
+       netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
+
+       ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+       check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+
+       buf |= PMT_CTL_PHY_RST;
+
+       ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
+       check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
+
+       timeout = 0;
+       do {
+               msleep(10);
+               ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+               check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+               timeout++;
+       } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
+
+       if (timeout >= 100) {
+               netdev_warn(dev->net, "timeout waiting for PHY Reset");
+               return -EIO;
+       }
+
+       netif_dbg(dev, ifup, dev->net, "PHY reset complete");
+
+       smsc75xx_init_mac_address(dev);
+
+       ret = smsc75xx_set_mac_address(dev);
+       check_warn_return(ret, "Failed to set mac address");
+
+       netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
+
+       ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+       check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
+
+       buf |= HW_CFG_BIR;
+
+       ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+       check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+       check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
+                       "writing HW_CFG_BIR: 0x%08x", buf);
+
+       if (!turbo_mode) {
+               buf = 0;
+               dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+       } else if (dev->udev->speed == USB_SPEED_HIGH) {
+               buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+               dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+       } else {
+               buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+               dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+       }
+
+       netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
+               (ulong)dev->rx_urb_size);
+
+       ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
+       check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
+       check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net,
+               "Read Value from BURST_CAP after writing: 0x%08x", buf);
+
+       ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+       check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
+       check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net,
+               "Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
+
+       if (turbo_mode) {
+               ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+               check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+               netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+
+               buf |= (HW_CFG_MEF | HW_CFG_BCE);
+
+               ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+               check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+               ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+               check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+               netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+       }
+
+       /* set FIFO sizes */
+       buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+       ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
+       check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
+
+       buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+       ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
+       check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
+
+       ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+       check_warn_return(ret, "Failed to write INT_STS: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, ID_REV, &buf);
+       check_warn_return(ret, "Failed to read ID_REV: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
+
+       /* Configure GPIO pins as LED outputs */
+       ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
+       check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
+
+       buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
+       buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+
+       ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
+       check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
+
+       ret = smsc75xx_write_reg(dev, FLOW, 0);
+       check_warn_return(ret, "Failed to write FLOW: %d", ret);
+
+       ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
+       check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
+
+       /* Don't need rfe_ctl_lock during initialisation */
+       ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+       check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+
+       pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
+
+       ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+       check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+       check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
+
+       /* Enable or disable checksum offload engines */
+       ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE);
+       ret = smsc75xx_set_rx_csum_offload(dev);
+       check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
+
+       smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE);
+
+       smsc75xx_set_multicast(dev->net);
+
+       ret = smsc75xx_phy_initialize(dev);
+       check_warn_return(ret, "Failed to initialize PHY: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
+       check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
+
+       /* enable PHY interrupts */
+       buf |= INT_ENP_PHY_INT;
+
+       ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
+       check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
+
+       ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
+       check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
+
+       buf |= MAC_TX_TXEN;
+
+       ret = smsc75xx_write_reg(dev, MAC_TX, buf);
+       check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
+
+       ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
+       check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
+
+       buf |= FCT_TX_CTL_EN;
+
+       ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
+       check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
+
+       ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+       check_warn_return(ret, "Failed to set max rx frame length");
+
+       ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+       check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+
+       buf |= MAC_RX_RXEN;
+
+       ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+       check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
+
+       ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
+       check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
+
+       buf |= FCT_RX_CTL_EN;
+
+       ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
+       check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
+
+       netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
+
+       netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
+       return 0;
+}
+
+static const struct net_device_ops smsc75xx_netdev_ops = {
+       .ndo_open               = usbnet_open,
+       .ndo_stop               = usbnet_stop,
+       .ndo_start_xmit         = usbnet_start_xmit,
+       .ndo_tx_timeout         = usbnet_tx_timeout,
+       .ndo_change_mtu         = smsc75xx_change_mtu,
+       .ndo_set_mac_address    = eth_mac_addr,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_do_ioctl           = smsc75xx_ioctl,
+       .ndo_set_multicast_list = smsc75xx_set_multicast,
+};
+
+static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+       struct smsc75xx_priv *pdata = NULL;
+       int ret;
+
+       printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+       ret = usbnet_get_endpoints(dev, intf);
+       check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
+
+       dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
+               GFP_KERNEL);
+
+       pdata = (struct smsc75xx_priv *)(dev->data[0]);
+       if (!pdata) {
+               netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
+               return -ENOMEM;
+       }
+
+       pdata->dev = dev;
+
+       spin_lock_init(&pdata->rfe_ctl_lock);
+       mutex_init(&pdata->dataport_mutex);
+
+       INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
+
+       pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+
+       /* We have to advertise SG otherwise TSO cannot be enabled */
+       dev->net->features |= NETIF_F_SG;
+
+       /* Init all registers */
+       ret = smsc75xx_reset(dev);
+
+       dev->net->netdev_ops = &smsc75xx_netdev_ops;
+       dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
+       dev->net->flags |= IFF_MULTICAST;
+       dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+       return 0;
+}
+
+static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+       if (pdata) {
+               netif_dbg(dev, ifdown, dev->net, "free pdata");
+               kfree(pdata);
+               pdata = NULL;
+               dev->data[0] = 0;
+       }
+}
+
+static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a,
+                                    u32 rx_cmd_b)
+{
+       if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+               skb->ip_summed = CHECKSUM_NONE;
+       } else {
+               skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
+               skb->ip_summed = CHECKSUM_COMPLETE;
+       }
+}
+
+static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+       struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+       while (skb->len > 0) {
+               u32 rx_cmd_a, rx_cmd_b, align_count, size;
+               struct sk_buff *ax_skb;
+               unsigned char *packet;
+
+               memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
+               le32_to_cpus(&rx_cmd_a);
+               skb_pull(skb, 4);
+
+               memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
+               le32_to_cpus(&rx_cmd_b);
+               skb_pull(skb, 4 + NET_IP_ALIGN);
+
+               packet = skb->data;
+
+               /* get the packet length */
+               size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
+               align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+
+               if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
+                       netif_dbg(dev, rx_err, dev->net,
+                               "Error rx_cmd_a=0x%08x", rx_cmd_a);
+                       dev->net->stats.rx_errors++;
+                       dev->net->stats.rx_dropped++;
+
+                       if (rx_cmd_a & RX_CMD_A_FCS)
+                               dev->net->stats.rx_crc_errors++;
+                       else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
+                               dev->net->stats.rx_frame_errors++;
+               } else {
+                       /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
+                       if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+                               netif_dbg(dev, rx_err, dev->net,
+                                       "size err rx_cmd_a=0x%08x", rx_cmd_a);
+                               return 0;
+                       }
+
+                       /* last frame in this batch */
+                       if (skb->len == size) {
+                               if (pdata->use_rx_csum)
+                                       smsc75xx_rx_csum_offload(skb, rx_cmd_a,
+                                               rx_cmd_b);
+                               else
+                                       skb->ip_summed = CHECKSUM_NONE;
+
+                               skb_trim(skb, skb->len - 4); /* remove fcs */
+                               skb->truesize = size + sizeof(struct sk_buff);
+
+                               return 1;
+                       }
+
+                       ax_skb = skb_clone(skb, GFP_ATOMIC);
+                       if (unlikely(!ax_skb)) {
+                               netdev_warn(dev->net, "Error allocating skb");
+                               return 0;
+                       }
+
+                       ax_skb->len = size;
+                       ax_skb->data = packet;
+                       skb_set_tail_pointer(ax_skb, size);
+
+                       if (pdata->use_rx_csum)
+                               smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a,
+                                       rx_cmd_b);
+                       else
+                               ax_skb->ip_summed = CHECKSUM_NONE;
+
+                       skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+                       ax_skb->truesize = size + sizeof(struct sk_buff);
+
+                       usbnet_skb_return(dev, ax_skb);
+               }
+
+               skb_pull(skb, size);
+
+               /* padding bytes before the next frame starts */
+               if (skb->len)
+                       skb_pull(skb, align_count);
+       }
+
+       if (unlikely(skb->len < 0)) {
+               netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
+               return 0;
+       }
+
+       return 1;
+}
+
+static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
+                                        struct sk_buff *skb, gfp_t flags)
+{
+       u32 tx_cmd_a, tx_cmd_b;
+
+       skb_linearize(skb);
+
+       if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
+               struct sk_buff *skb2 =
+                       skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
+               dev_kfree_skb_any(skb);
+               skb = skb2;
+               if (!skb)
+                       return NULL;
+       }
+
+       tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
+
+       if (skb->ip_summed == CHECKSUM_PARTIAL)
+               tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
+
+       if (skb_is_gso(skb)) {
+               u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
+               tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
+
+               tx_cmd_a |= TX_CMD_A_LSO;
+       } else {
+               tx_cmd_b = 0;
+       }
+
+       skb_push(skb, 4);
+       cpu_to_le32s(&tx_cmd_b);
+       memcpy(skb->data, &tx_cmd_b, 4);
+
+       skb_push(skb, 4);
+       cpu_to_le32s(&tx_cmd_a);
+       memcpy(skb->data, &tx_cmd_a, 4);
+
+       return skb;
+}
+
+static const struct driver_info smsc75xx_info = {
+       .description    = "smsc75xx USB 2.0 Gigabit Ethernet",
+       .bind           = smsc75xx_bind,
+       .unbind         = smsc75xx_unbind,
+       .link_reset     = smsc75xx_link_reset,
+       .reset          = smsc75xx_reset,
+       .rx_fixup       = smsc75xx_rx_fixup,
+       .tx_fixup       = smsc75xx_tx_fixup,
+       .status         = smsc75xx_status,
+       .flags          = FLAG_ETHER | FLAG_SEND_ZLP,
+};
+
+static const struct usb_device_id products[] = {
+       {
+               /* SMSC7500 USB Gigabit Ethernet Device */
+               USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
+               .driver_info = (unsigned long) &smsc75xx_info,
+       },
+       {
+               /* SMSC7500 USB Gigabit Ethernet Device */
+               USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
+               .driver_info = (unsigned long) &smsc75xx_info,
+       },
+       { },            /* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc75xx_driver = {
+       .name           = SMSC_CHIPNAME,
+       .id_table       = products,
+       .probe          = usbnet_probe,
+       .suspend        = usbnet_suspend,
+       .resume         = usbnet_resume,
+       .disconnect     = usbnet_disconnect,
+};
+
+static int __init smsc75xx_init(void)
+{
+       return usb_register(&smsc75xx_driver);
+}
+module_init(smsc75xx_init);
+
+static void __exit smsc75xx_exit(void)
+{
+       usb_deregister(&smsc75xx_driver);
+}
+module_exit(smsc75xx_exit);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc75xx.h b/drivers/net/usb/smsc75xx.h
new file mode 100644 (file)
index 0000000..16e98c7
--- /dev/null
@@ -0,0 +1,421 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC75XX_H
+#define _SMSC75XX_H
+
+/* Tx command words */
+#define TX_CMD_A_LSO                   (0x08000000)
+#define TX_CMD_A_IPE                   (0x04000000)
+#define TX_CMD_A_TPE                   (0x02000000)
+#define TX_CMD_A_IVTG                  (0x01000000)
+#define TX_CMD_A_RVTG                  (0x00800000)
+#define TX_CMD_A_FCS                   (0x00400000)
+#define TX_CMD_A_LEN                   (0x000FFFFF)
+
+#define TX_CMD_B_MSS                   (0x3FFF0000)
+#define TX_CMD_B_MSS_SHIFT             (16)
+#define TX_MSS_MIN                     ((u16)8)
+#define TX_CMD_B_VTAG                  (0x0000FFFF)
+
+/* Rx command words */
+#define RX_CMD_A_ICE                   (0x80000000)
+#define RX_CMD_A_TCE                   (0x40000000)
+#define RX_CMD_A_IPV                   (0x20000000)
+#define RX_CMD_A_PID                   (0x18000000)
+#define RX_CMD_A_PID_NIP               (0x00000000)
+#define RX_CMD_A_PID_TCP               (0x08000000)
+#define RX_CMD_A_PID_UDP               (0x10000000)
+#define RX_CMD_A_PID_PP                        (0x18000000)
+#define RX_CMD_A_PFF                   (0x04000000)
+#define RX_CMD_A_BAM                   (0x02000000)
+#define RX_CMD_A_MAM                   (0x01000000)
+#define RX_CMD_A_FVTG                  (0x00800000)
+#define RX_CMD_A_RED                   (0x00400000)
+#define RX_CMD_A_RWT                   (0x00200000)
+#define RX_CMD_A_RUNT                  (0x00100000)
+#define RX_CMD_A_LONG                  (0x00080000)
+#define RX_CMD_A_RXE                   (0x00040000)
+#define RX_CMD_A_DRB                   (0x00020000)
+#define RX_CMD_A_FCS                   (0x00010000)
+#define RX_CMD_A_UAM                   (0x00008000)
+#define RX_CMD_A_LCSM                  (0x00004000)
+#define RX_CMD_A_LEN                   (0x00003FFF)
+
+#define RX_CMD_B_CSUM                  (0xFFFF0000)
+#define RX_CMD_B_CSUM_SHIFT            (16)
+#define RX_CMD_B_VTAG                  (0x0000FFFF)
+
+/* SCSRs */
+#define ID_REV                         (0x0000)
+
+#define FPGA_REV                       (0x0004)
+
+#define BOND_CTL                       (0x0008)
+
+#define INT_STS                                (0x000C)
+#define INT_STS_RDFO_INT               (0x00400000)
+#define INT_STS_TXE_INT                        (0x00200000)
+#define INT_STS_MACRTO_INT             (0x00100000)
+#define INT_STS_TX_DIS_INT             (0x00080000)
+#define INT_STS_RX_DIS_INT             (0x00040000)
+#define INT_STS_PHY_INT_               (0x00020000)
+#define INT_STS_MAC_ERR_INT            (0x00008000)
+#define INT_STS_TDFU                   (0x00004000)
+#define INT_STS_TDFO                   (0x00002000)
+#define INT_STS_GPIOS                  (0x00000FFF)
+#define INT_STS_CLEAR_ALL              (0xFFFFFFFF)
+
+#define HW_CFG                         (0x0010)
+#define HW_CFG_SMDET_STS               (0x00008000)
+#define HW_CFG_SMDET_EN                        (0x00004000)
+#define HW_CFG_EEM                     (0x00002000)
+#define HW_CFG_RST_PROTECT             (0x00001000)
+#define HW_CFG_PORT_SWAP               (0x00000800)
+#define HW_CFG_PHY_BOOST               (0x00000600)
+#define HW_CFG_PHY_BOOST_NORMAL                (0x00000000)
+#define HW_CFG_PHY_BOOST_4             (0x00002000)
+#define HW_CFG_PHY_BOOST_8             (0x00004000)
+#define HW_CFG_PHY_BOOST_12            (0x00006000)
+#define HW_CFG_LEDB                    (0x00000100)
+#define HW_CFG_BIR                     (0x00000080)
+#define HW_CFG_SBP                     (0x00000040)
+#define HW_CFG_IME                     (0x00000020)
+#define HW_CFG_MEF                     (0x00000010)
+#define HW_CFG_ETC                     (0x00000008)
+#define HW_CFG_BCE                     (0x00000004)
+#define HW_CFG_LRST                    (0x00000002)
+#define HW_CFG_SRST                    (0x00000001)
+
+#define PMT_CTL                                (0x0014)
+#define PMT_CTL_PHY_PWRUP              (0x00000400)
+#define PMT_CTL_RES_CLR_WKP_EN         (0x00000100)
+#define PMT_CTL_DEV_RDY                        (0x00000080)
+#define PMT_CTL_SUS_MODE               (0x00000060)
+#define PMT_CTL_SUS_MODE_0             (0x00000000)
+#define PMT_CTL_SUS_MODE_1             (0x00000020)
+#define PMT_CTL_SUS_MODE_2             (0x00000040)
+#define PMT_CTL_SUS_MODE_3             (0x00000060)
+#define PMT_CTL_PHY_RST                        (0x00000010)
+#define PMT_CTL_WOL_EN                 (0x00000008)
+#define PMT_CTL_ED_EN                  (0x00000004)
+#define PMT_CTL_WUPS                   (0x00000003)
+#define PMT_CTL_WUPS_NO                        (0x00000000)
+#define PMT_CTL_WUPS_ED                        (0x00000001)
+#define PMT_CTL_WUPS_WOL               (0x00000002)
+#define PMT_CTL_WUPS_MULTI             (0x00000003)
+
+#define LED_GPIO_CFG                   (0x0018)
+#define LED_GPIO_CFG_LED2_FUN_SEL      (0x80000000)
+#define LED_GPIO_CFG_LED10_FUN_SEL     (0x40000000)
+#define LED_GPIO_CFG_LEDGPIO_EN                (0x0000F000)
+#define LED_GPIO_CFG_LEDGPIO_EN_0      (0x00001000)
+#define LED_GPIO_CFG_LEDGPIO_EN_1      (0x00002000)
+#define LED_GPIO_CFG_LEDGPIO_EN_2      (0x00004000)
+#define LED_GPIO_CFG_LEDGPIO_EN_3      (0x00008000)
+#define LED_GPIO_CFG_GPBUF             (0x00000F00)
+#define LED_GPIO_CFG_GPBUF_0           (0x00000100)
+#define LED_GPIO_CFG_GPBUF_1           (0x00000200)
+#define LED_GPIO_CFG_GPBUF_2           (0x00000400)
+#define LED_GPIO_CFG_GPBUF_3           (0x00000800)
+#define LED_GPIO_CFG_GPDIR             (0x000000F0)
+#define LED_GPIO_CFG_GPDIR_0           (0x00000010)
+#define LED_GPIO_CFG_GPDIR_1           (0x00000020)
+#define LED_GPIO_CFG_GPDIR_2           (0x00000040)
+#define LED_GPIO_CFG_GPDIR_3           (0x00000080)
+#define LED_GPIO_CFG_GPDATA            (0x0000000F)
+#define LED_GPIO_CFG_GPDATA_0          (0x00000001)
+#define LED_GPIO_CFG_GPDATA_1          (0x00000002)
+#define LED_GPIO_CFG_GPDATA_2          (0x00000004)
+#define LED_GPIO_CFG_GPDATA_3          (0x00000008)
+
+#define GPIO_CFG                       (0x001C)
+#define GPIO_CFG_SHIFT                 (24)
+#define GPIO_CFG_GPEN                  (0xFF000000)
+#define GPIO_CFG_GPBUF                 (0x00FF0000)
+#define GPIO_CFG_GPDIR                 (0x0000FF00)
+#define GPIO_CFG_GPDATA                        (0x000000FF)
+
+#define GPIO_WAKE                      (0x0020)
+#define GPIO_WAKE_PHY_LINKUP_EN                (0x80000000)
+#define GPIO_WAKE_POL                  (0x0FFF0000)
+#define GPIO_WAKE_POL_SHIFT            (16)
+#define GPIO_WAKE_WK                   (0x00000FFF)
+
+#define DP_SEL                         (0x0024)
+#define DP_SEL_DPRDY                   (0x80000000)
+#define DP_SEL_RSEL                    (0x0000000F)
+#define DP_SEL_URX                     (0x00000000)
+#define DP_SEL_VHF                     (0x00000001)
+#define DP_SEL_VHF_HASH_LEN            (16)
+#define DP_SEL_VHF_VLAN_LEN            (128)
+#define DP_SEL_LSO_HEAD                        (0x00000002)
+#define DP_SEL_FCT_RX                  (0x00000003)
+#define DP_SEL_FCT_TX                  (0x00000004)
+#define DP_SEL_DESCRIPTOR              (0x00000005)
+#define DP_SEL_WOL                     (0x00000006)
+
+#define DP_CMD                         (0x0028)
+#define DP_CMD_WRITE                   (0x01)
+#define DP_CMD_READ                    (0x00)
+
+#define DP_ADDR                                (0x002C)
+
+#define DP_DATA                                (0x0030)
+
+#define BURST_CAP                      (0x0034)
+#define BURST_CAP_MASK                 (0x0000000F)
+
+#define INT_EP_CTL                     (0x0038)
+#define INT_EP_CTL_INTEP_ON            (0x80000000)
+#define INT_EP_CTL_RDFO_EN             (0x00400000)
+#define INT_EP_CTL_TXE_EN              (0x00200000)
+#define INT_EP_CTL_MACROTO_EN          (0x00100000)
+#define INT_EP_CTL_TX_DIS_EN           (0x00080000)
+#define INT_EP_CTL_RX_DIS_EN           (0x00040000)
+#define INT_EP_CTL_PHY_EN_             (0x00020000)
+#define INT_EP_CTL_MAC_ERR_EN          (0x00008000)
+#define INT_EP_CTL_TDFU_EN             (0x00004000)
+#define INT_EP_CTL_TDFO_EN             (0x00002000)
+#define INT_EP_CTL_RX_FIFO_EN          (0x00001000)
+#define INT_EP_CTL_GPIOX_EN            (0x00000FFF)
+
+#define BULK_IN_DLY                    (0x003C)
+#define BULK_IN_DLY_MASK               (0xFFFF)
+
+#define E2P_CMD                                (0x0040)
+#define E2P_CMD_BUSY                   (0x80000000)
+#define E2P_CMD_MASK                   (0x70000000)
+#define E2P_CMD_READ                   (0x00000000)
+#define E2P_CMD_EWDS                   (0x10000000)
+#define E2P_CMD_EWEN                   (0x20000000)
+#define E2P_CMD_WRITE                  (0x30000000)
+#define E2P_CMD_WRAL                   (0x40000000)
+#define E2P_CMD_ERASE                  (0x50000000)
+#define E2P_CMD_ERAL                   (0x60000000)
+#define E2P_CMD_RELOAD                 (0x70000000)
+#define E2P_CMD_TIMEOUT                        (0x00000400)
+#define E2P_CMD_LOADED                 (0x00000200)
+#define E2P_CMD_ADDR                   (0x000001FF)
+
+#define MAX_EEPROM_SIZE                        (512)
+
+#define E2P_DATA                       (0x0044)
+#define E2P_DATA_MASK_                 (0x000000FF)
+
+#define RFE_CTL                                (0x0060)
+#define RFE_CTL_TCPUDP_CKM             (0x00001000)
+#define RFE_CTL_IP_CKM                 (0x00000800)
+#define RFE_CTL_AB                     (0x00000400)
+#define RFE_CTL_AM                     (0x00000200)
+#define RFE_CTL_AU                     (0x00000100)
+#define RFE_CTL_VS                     (0x00000080)
+#define RFE_CTL_UF                     (0x00000040)
+#define RFE_CTL_VF                     (0x00000020)
+#define RFE_CTL_SPF                    (0x00000010)
+#define RFE_CTL_MHF                    (0x00000008)
+#define RFE_CTL_DHF                    (0x00000004)
+#define RFE_CTL_DPF                    (0x00000002)
+#define RFE_CTL_RST_RF                 (0x00000001)
+
+#define VLAN_TYPE                      (0x0064)
+#define VLAN_TYPE_MASK                 (0x0000FFFF)
+
+#define FCT_RX_CTL                     (0x0090)
+#define FCT_RX_CTL_EN                  (0x80000000)
+#define FCT_RX_CTL_RST                 (0x40000000)
+#define FCT_RX_CTL_SBF                 (0x02000000)
+#define FCT_RX_CTL_OVERFLOW            (0x01000000)
+#define FCT_RX_CTL_FRM_DROP            (0x00800000)
+#define FCT_RX_CTL_RX_NOT_EMPTY                (0x00400000)
+#define FCT_RX_CTL_RX_EMPTY            (0x00200000)
+#define FCT_RX_CTL_RX_DISABLED         (0x00100000)
+#define FCT_RX_CTL_RXUSED              (0x0000FFFF)
+
+#define FCT_TX_CTL                     (0x0094)
+#define FCT_TX_CTL_EN                  (0x80000000)
+#define FCT_TX_CTL_RST                 (0x40000000)
+#define FCT_TX_CTL_TX_NOT_EMPTY                (0x00400000)
+#define FCT_TX_CTL_TX_EMPTY            (0x00200000)
+#define FCT_TX_CTL_TX_DISABLED         (0x00100000)
+#define FCT_TX_CTL_TXUSED              (0x0000FFFF)
+
+#define FCT_RX_FIFO_END                        (0x0098)
+#define FCT_RX_FIFO_END_MASK           (0x0000007F)
+
+#define FCT_TX_FIFO_END                        (0x009C)
+#define FCT_TX_FIFO_END_MASK           (0x0000003F)
+
+#define FCT_FLOW                       (0x00A0)
+#define FCT_FLOW_THRESHOLD_OFF         (0x00007F00)
+#define FCT_FLOW_THRESHOLD_OFF_SHIFT   (8)
+#define FCT_FLOW_THRESHOLD_ON          (0x0000007F)
+
+/* MAC CSRs */
+#define MAC_CR                         (0x100)
+#define MAC_CR_ADP                     (0x00002000)
+#define MAC_CR_ADD                     (0x00001000)
+#define MAC_CR_ASD                     (0x00000800)
+#define MAC_CR_INT_LOOP                        (0x00000400)
+#define MAC_CR_BOLMT                   (0x000000C0)
+#define MAC_CR_FDPX                    (0x00000008)
+#define MAC_CR_CFG                     (0x00000006)
+#define MAC_CR_CFG_10                  (0x00000000)
+#define MAC_CR_CFG_100                 (0x00000002)
+#define MAC_CR_CFG_1000                        (0x00000004)
+#define MAC_CR_RST                     (0x00000001)
+
+#define MAC_RX                         (0x104)
+#define MAC_RX_MAX_SIZE                        (0x3FFF0000)
+#define MAC_RX_MAX_SIZE_SHIFT          (16)
+#define MAC_RX_FCS_STRIP               (0x00000010)
+#define MAC_RX_FSE                     (0x00000004)
+#define MAC_RX_RXD                     (0x00000002)
+#define MAC_RX_RXEN                    (0x00000001)
+
+#define MAC_TX                         (0x108)
+#define MAC_TX_BFCS                    (0x00000004)
+#define MAC_TX_TXD                     (0x00000002)
+#define MAC_TX_TXEN                    (0x00000001)
+
+#define FLOW                           (0x10C)
+#define FLOW_FORCE_FC                  (0x80000000)
+#define FLOW_TX_FCEN                   (0x40000000)
+#define FLOW_RX_FCEN                   (0x20000000)
+#define FLOW_FPF                       (0x10000000)
+#define FLOW_PAUSE_TIME                        (0x0000FFFF)
+
+#define RAND_SEED                      (0x110)
+#define RAND_SEED_MASK                 (0x0000FFFF)
+
+#define ERR_STS                                (0x114)
+#define ERR_STS_FCS_ERR                        (0x00000100)
+#define ERR_STS_LFRM_ERR               (0x00000080)
+#define ERR_STS_RUNT_ERR               (0x00000040)
+#define ERR_STS_COLLISION_ERR          (0x00000010)
+#define ERR_STS_ALIGN_ERR              (0x00000008)
+#define ERR_STS_URUN_ERR               (0x00000004)
+
+#define RX_ADDRH                       (0x118)
+#define RX_ADDRH_MASK                  (0x0000FFFF)
+
+#define RX_ADDRL                       (0x11C)
+
+#define MII_ACCESS                     (0x120)
+#define MII_ACCESS_PHY_ADDR            (0x0000F800)
+#define MII_ACCESS_PHY_ADDR_SHIFT      (11)
+#define MII_ACCESS_REG_ADDR            (0x000007C0)
+#define MII_ACCESS_REG_ADDR_SHIFT      (6)
+#define MII_ACCESS_READ                        (0x00000000)
+#define MII_ACCESS_WRITE               (0x00000002)
+#define MII_ACCESS_BUSY                        (0x00000001)
+
+#define MII_DATA                       (0x124)
+#define MII_DATA_MASK                  (0x0000FFFF)
+
+#define WUCSR                          (0x140)
+#define WUCSR_PFDA_FR                  (0x00000080)
+#define WUCSR_WUFR                     (0x00000040)
+#define WUCSR_MPR                      (0x00000020)
+#define WUCSR_BCAST_FR                 (0x00000010)
+#define WUCSR_PFDA_EN                  (0x00000008)
+#define WUCSR_WUEN                     (0x00000004)
+#define WUCSR_MPEN                     (0x00000002)
+#define WUCSR_BCST_EN                  (0x00000001)
+
+#define WUF_CFGX                       (0x144)
+#define WUF_CFGX_EN                    (0x80000000)
+#define WUF_CFGX_ATYPE                 (0x03000000)
+#define WUF_CFGX_ATYPE_UNICAST         (0x00000000)
+#define WUF_CFGX_ATYPE_MULTICAST       (0x02000000)
+#define WUF_CFGX_ATYPE_ALL             (0x03000000)
+#define WUF_CFGX_PATTERN_OFFSET                (0x007F0000)
+#define WUF_CFGX_PATTERN_OFFSET_SHIFT  (16)
+#define WUF_CFGX_CRC16                 (0x0000FFFF)
+#define WUF_NUM                                (8)
+
+#define WUF_MASKX                      (0x170)
+#define WUF_MASKX_AVALID               (0x80000000)
+#define WUF_MASKX_ATYPE                        (0x40000000)
+
+#define ADDR_FILTX                     (0x300)
+#define ADDR_FILTX_FB_VALID            (0x80000000)
+#define ADDR_FILTX_FB_TYPE             (0x40000000)
+#define ADDR_FILTX_FB_ADDRHI           (0x0000FFFF)
+#define ADDR_FILTX_SB_ADDRLO           (0xFFFFFFFF)
+
+#define WUCSR2                         (0x500)
+#define WUCSR2_NS_RCD                  (0x00000040)
+#define WUCSR2_ARP_RCD                 (0x00000020)
+#define WUCSR2_TCPSYN_RCD              (0x00000010)
+#define WUCSR2_NS_OFFLOAD              (0x00000004)
+#define WUCSR2_ARP_OFFLOAD             (0x00000002)
+#define WUCSR2_TCPSYN_OFFLOAD          (0x00000001)
+
+#define WOL_FIFO_STS                   (0x504)
+
+#define IPV6_ADDRX                     (0x510)
+
+#define IPV4_ADDRX                     (0x590)
+
+
+/* Vendor-specific PHY Definitions */
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS              (17)
+#define MODE_CTRL_STS_EDPWRDOWN                ((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON         ((u16)0x0002)
+
+#define PHY_INT_SRC                    (29)
+#define PHY_INT_SRC_ENERGY_ON          ((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP          ((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT       ((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN          ((u16)0x0010)
+
+#define PHY_INT_MASK                   (30)
+#define PHY_INT_MASK_ENERGY_ON         ((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP         ((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT      ((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN         ((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT           (PHY_INT_MASK_ANEG_COMP | \
+                                        PHY_INT_MASK_LINK_DOWN)
+
+#define PHY_SPECIAL                    (31)
+#define PHY_SPECIAL_SPD                        ((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF         ((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL         ((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF                ((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL                ((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER      0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER       0xA1
+#define USB_VENDOR_REQUEST_GET_STATS           0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_RDFO_INT               ((u32)BIT(22))
+#define INT_ENP_TXE_INT                        ((u32)BIT(21))
+#define INT_ENP_TX_DIS_INT             ((u32)BIT(19))
+#define INT_ENP_RX_DIS_INT             ((u32)BIT(18))
+#define INT_ENP_PHY_INT                        ((u32)BIT(17))
+#define INT_ENP_MAC_ERR_INT            ((u32)BIT(15))
+#define INT_ENP_RX_FIFO_DATA_INT       ((u32)BIT(12))
+
+#endif /* _SMSC75XX_H */