mtd: gpmi: fix the bch setting backward compatible issue

Previous u-boot code changed the default bch setting behavior and caused
backward compatible issue. This fix choose the legacy bch geometry back
again as the default option. If the minimum ecc strength that NAND chips
required need to be chosen, it can be enabled by either adding DT flag
"fsl,use-minimum-ecc" or CONFIG_NAND_MXS_USE_MINIMUM_ECC in configs. The
unused flag "fsl,legacy-bch-geometry" get removed.

Fixes: 9675a86c0b (mtd: gpmi: provide the option to use legacy bch geometry)
Fixes: 5045027531 (mtd: gpmi: change the BCH layout setting for large oob NAND)
Tested-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>

diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c
index 748056a43e6f4f4dd78f57b8ad7f42421c22b62f..ee5d7fde9ce1087cd31588883623dde6ee029adf 100644 (file)
--- a/drivers/mtd/nand/raw/mxs_nand.c
+++ b/drivers/mtd/nand/raw/mxs_nand.c
@@ -195,6 +195,7 @@ static inline int mxs_nand_legacy_calc_ecc_layout(struct bch_geometry *geo,
        struct nand_chip *chip = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
        unsigned int block_mark_bit_offset;
+       int corr, ds_corr;
 
        /* The default for the length of Galois Field. */
        geo->gf_len = 13;
@@ -225,6 +226,17 @@ static inline int mxs_nand_legacy_calc_ecc_layout(struct bch_geometry *geo,
        geo->ecc_strength = min(round_down(geo->ecc_strength, 2),
                                nand_info->max_ecc_strength_supported);
 
+       /* check ecc strength, same as nand_ecc_is_strong_enough() did*/
+       if (chip->ecc_step_ds) {
+               corr = mtd->writesize * geo->ecc_strength /
+                      geo->ecc_chunkn_size;
+               ds_corr = mtd->writesize * chip->ecc_strength_ds /
+                      chip->ecc_step_ds;
+               if (corr < ds_corr ||
+                   geo->ecc_strength < chip->ecc_strength_ds)
+                       return -EINVAL;
+       }
+
        block_mark_bit_offset = mtd->writesize * 8 -
                (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
                                + MXS_NAND_METADATA_SIZE * 8);
@@ -1111,6 +1123,7 @@ static int mxs_nand_set_geometry(struct mtd_info *mtd, struct bch_geometry *geo)
        struct nand_chip *chip = mtd_to_nand(mtd);
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
+       int err;
 
        if (chip->ecc_strength_ds > nand_info->max_ecc_strength_supported) {
                printf("unsupported NAND chip, minimum ecc required %d\n"
@@ -1118,19 +1131,57 @@ static int mxs_nand_set_geometry(struct mtd_info *mtd, struct bch_geometry *geo)
                return -EINVAL;
        }
 
-       if ((!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0) &&
-            mtd->oobsize < 1024) || nand_info->legacy_bch_geometry) {
-               dev_warn(mtd->dev, "use legacy bch geometry\n");
-               return mxs_nand_legacy_calc_ecc_layout(geo, mtd);
+       /* use the legacy bch setting by default */
+       if ((!nand_info->use_minimum_ecc && mtd->oobsize < 1024) ||
+           !(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0)) {
+               dev_dbg(mtd->dev, "use legacy bch geometry\n");
+               err = mxs_nand_legacy_calc_ecc_layout(geo, mtd);
+               if (!err)
+                       return 0;
        }
 
-       if (mtd->oobsize > 1024 || chip->ecc_step_ds < mtd->oobsize)
-               return mxs_nand_calc_ecc_for_large_oob(geo, mtd);
+       /* for large oob nand */
+       if (mtd->oobsize > 1024) {
+               dev_dbg(mtd->dev, "use large oob bch geometry\n");
+               err = mxs_nand_calc_ecc_for_large_oob(geo, mtd);
+               if (!err)
+                       return 0;
+       }
 
-       return mxs_nand_calc_ecc_layout_by_info(geo, mtd,
-                               chip->ecc_strength_ds, chip->ecc_step_ds);
+       /* otherwise use the minimum ecc nand chips required */
+       dev_dbg(mtd->dev, "use minimum ecc bch geometry\n");
+       err = mxs_nand_calc_ecc_layout_by_info(geo, mtd, chip->ecc_strength_ds,
+                                              chip->ecc_step_ds);
 
-       return 0;
+       if (err)
+               dev_err(mtd->dev, "none of the bch geometry setting works\n");
+
+       return err;
+}
+
+void mxs_nand_dump_geo(struct mtd_info *mtd)
+{
+       struct nand_chip *nand = mtd_to_nand(mtd);
+       struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
+       struct bch_geometry *geo = &nand_info->bch_geometry;
+
+       dev_dbg(mtd->dev, "BCH Geometry :\n"
+               "GF Length\t\t: %u\n"
+               "ECC Strength\t\t: %u\n"
+               "ECC for Meta\t\t: %u\n"
+               "ECC Chunk0 Size\t\t: %u\n"
+               "ECC Chunkn Size\t\t: %u\n"
+               "ECC Chunk Count\t\t: %u\n"
+               "Block Mark Byte Offset\t: %u\n"
+               "Block Mark Bit Offset\t: %u\n",
+               geo->gf_len,
+               geo->ecc_strength,
+               geo->ecc_for_meta,
+               geo->ecc_chunk0_size,
+               geo->ecc_chunkn_size,
+               geo->ecc_chunk_count,
+               geo->block_mark_byte_offset,
+               geo->block_mark_bit_offset);
 }
 
 /*
@@ -1159,6 +1210,8 @@ int mxs_nand_setup_ecc(struct mtd_info *mtd)
        if (ret)
                return ret;
 
+       mxs_nand_dump_geo(mtd);
+
        /* Configure BCH and set NFC geometry */
        mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
 

diff --git a/drivers/mtd/nand/raw/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c
index 878796d5552aadc6b214e4dcf4e88107962d4204..b9833a646f011d07c27bdb035949f6d34d9ec70c 100644 (file)
--- a/drivers/mtd/nand/raw/mxs_nand_dt.c
+++ b/drivers/mtd/nand/raw/mxs_nand_dt.c
@@ -92,8 +92,6 @@ static int mxs_nand_dt_probe(struct udevice *dev)
 
        info->use_minimum_ecc = dev_read_bool(dev, "fsl,use-minimum-ecc");
 
-       info->legacy_bch_geometry = dev_read_bool(dev, "fsl,legacy-bch-geometry");
-
        if (IS_ENABLED(CONFIG_CLK) && IS_ENABLED(CONFIG_IMX8)) {
                /* Assigned clock already set clock */
                struct clk gpmi_clk;

diff --git a/include/mxs_nand.h b/include/mxs_nand.h
index 66c909318d1fe114bb391b05cd3690d90f9bbe8c..741dc8734eae3db8e83c8935a2205984fd1a121d 100644 (file)
--- a/include/mxs_nand.h
+++ b/include/mxs_nand.h
@@ -44,8 +44,6 @@ struct mxs_nand_info {
        struct udevice *dev;
        unsigned int    max_ecc_strength_supported;
        bool            use_minimum_ecc;
-       /* legacy bch geometry flag */
-       bool            legacy_bch_geometry;
        int             cur_chip;
 
        uint32_t        cmd_queue_len;