CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=31
CONFIG_PHY_SMSC=y
+CONFIG_RMII=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_CONS_INDEX=5
CONFIG_SYS_NS16550=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_RTC_PCF8563=y
CONFIG_NAND_ATMEL=y
CONFIG_ATMEL_NAND_HWECC=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_GADGET=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_ATMEL_USART=y
# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
CONFIG_NAND_ATMEL=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
CONFIG_PHY_SMSC=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MACB=y
+CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
help
Enable support of the Media-Independent Interface (MII)
+config RMII
+ bool "Enable RMII"
+ help
+ Enable support of the Reduced Media-Independent Interface (MII)
+
config PCNET
bool "AMD PCnet series Ethernet controller driver"
help
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
#endif
-/* Ethernet */
-#define CONFIG_RMII
-
/* DFU class support */
#define DFU_MANIFEST_POLL_TIMEOUT 25000
/*
* Ethernet
*/
-#define CONFIG_RMII
#define CONFIG_LPC32XX_ETH
/*
/* JFFS2 */
/* Ethernet */
-#define CONFIG_RMII
#define CONFIG_PHY_ID 0
#define CONFIG_MACB_SEARCH_PHY
# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
#endif
-/* Ethernet */
-#define CONFIG_RMII
-
/* hw-controller addresses */
#define CONFIG_ET1100_BASE 0x70000000
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-/*
- * Ethernet configuration
- *
- */
-#define CONFIG_RMII /* use reduced MII inteface */
-
-/* BOOTP and DHCP options */
-
#if !defined(CONFIG_SPL_BUILD)
/* USB configuration */
#define CONFIG_USB_ATMEL
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
/* Ethernet */
-#define CONFIG_RMII
#define CONFIG_TFTP_PORT
/* USB */
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8
/* Ethernet */
-#define CONFIG_RMII
#define CONFIG_TFTP_PORT
/* LCD */
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
#endif
-/* Ethernet */
-#define CONFIG_RMII
-
/* USB */
#if defined(CONFIG_BOARD_TAURUS)
#define CONFIG_USB_ATMEL
#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
#endif
-/* Ethernet */
-#define CONFIG_RMII
-
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_ATMEL
/* USB device */
/* Ethernet Hardware */
-#define CONFIG_RMII
#define CONFIG_MACB_SEARCH_PHY
#ifdef CONFIG_SPI_BOOT