drm-misc-next for 5.11:
UAPI Changes:
- doc: rules for EBUSY on non-blocking commits; requirements for fourcc
modifiers; on parsing EDID
- fbdev/sbuslib: Remove unused FBIOSCURSOR32
- fourcc: deprecate DRM_FORMAT_MOD_NONE
- virtio: Support blob resources for memory allocations; Expose host-visible
and cross-device features
Cross-subsystem Changes:
- devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display
Optoelectronics
- dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag;
dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro
Core Changes:
- atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during
non-blocking commits
- dp: Prepare for DP 2.0 DPCD
- dp_mst: Receive extended DPCD caps
- dma-buf: Documentation
- doc: Format modifiers; dma-buf-map; Cleanups
- fbdev: Don't use compat_alloc_user_space(); mark as orphaned
- fb-helper: Take lock in drm_fb_helper_restore_work_fb()
- gem: Convert implementation and drivers to GEM object functions, remove
GEM callbacks from struct drm_driver (expect gem_prime_mmap)
- panel: Cleanups
- pci: Add legacy infix to drm_irq_by_busid()
- sched: Avoid infinite waits in drm_sched_entity_destroy()
- switcheroo: Cleanups
- ttm: Remove AGP support; Don't modify caching during swapout; Major
refactoring of the implementation and API that affects all depending
drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of
TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify()
callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE;
Replace caching flags with init-time cache setting; Push ttm_tt_bind() into
drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy();
no more ttm_set_populated()
- vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM
object functions with defaults; Default placement in system memory; Cleanups
Driver Changes:
- amdgpu: Use GEM object functions
- armada: Use GEM object functions
- aspeed: Configure output via sysfs; Init struct drm_driver with
- ast: Reload LUT after FB format changes
- bridge: Add driver and DT bindings for anx7625; Cleanups
- bridge/dw-hdmi: Constify ops
- bridge/ti-sn65dsi86: Add retries for link training
- bridge/lvds-codec: Add support for regulator
- bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups
- display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
dma-coherent
- display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
dma-coherent
- etnaviv: Use GEM object functions
- exynos: Use GEM object functions
- fbdev: Cleanups and compiler fixes throughout framebuffer drivers
- fbdev/cirrusfb: Avoid division by 0
- gma500: Use GEM object functions; Fix double-free of connector; Cleanups
- hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups
- i915: Use GEM object functions
- imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups
- ingenic: Reset pixel clock when parent clock changes; support reserved
memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats;
Revert support for cached mmap buffers
on F0/F1; support 30-bit/24-bit/8-bit-palette modes
- komeda: Use DEFINE_SHOW_ATTRIBUTE
- mcde: Detect platform_get_irq() errors
- mediatek: Use GEM object functions
- msm: Use GEM object functions
- nouveau: Cleanups; TTM-related changes; Use GEM object functions
- omapdrm: Use GEM object functions
- panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT
bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30;
Cleanups
- panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes()
- panel/otm8009a: Allow non-continuous dsi clock; Cleanups
- panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS
- panfrost: Fix job timeout handling; Cleanups
- pl111: Use GEM object functions
- qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved()
- radeon: Cleanups; TTM-related changes; Use GEM object functions
- rockchip: Use GEM object functions
- shmobile: Cleanups
- tegra: Use GEM object functions
- tidss: Set drm_plane_helper_funcs.prepare_fb
- tilcdc: Don't keep vblank interrupt enabled all the time
- tve200: Detect platform_get_irq() errors
- vc4: Use GEM object functions; Only register components once DSI is attached;
Add Maxime as maintainer
- vgem: Use GEM object functions
- via: Simplify critical section in via_mem_alloc()
- virtgpu: Use GEM object functions
- virtio: Implement blob resources, host-visible and cross-device features;
Support mapping of host-allocated resources; Use UUID APi; Cleanups
- vkms: Use GEM object functions; Switch to SHMEM
- vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all()
- xen: Use GEM object functions
- xlnx: Use GEM object functions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027100936.GA4858@linux-uq9g
*/
drm_gem_object_get(obj);
- if (obj->funcs && obj->funcs->mmap) {
+ vma->vm_private_data = obj;
+
+ if (obj->funcs->mmap) {
ret = obj->funcs->mmap(obj, vma);
if (ret) {
drm_gem_object_put(obj);
if (WARN_ON(dir == DMA_NONE))
return ERR_PTR(-EINVAL);
- if (obj->funcs)
- sgt = obj->funcs->get_sg_table(obj);
- else
- sgt = obj->dev->driver->gem_prime_get_sg_table(obj);
+ if (WARN_ON(!obj->funcs->get_sg_table))
+ return ERR_PTR(-ENOSYS);
+
+ sgt = obj->funcs->get_sg_table(obj);
+ if (IS_ERR(sgt))
+ return sgt;
- if (!dma_map_sg_attrs(attach->dev, sgt->sgl, sgt->nents, dir,
- DMA_ATTR_SKIP_CPU_SYNC)) {
+ ret = dma_map_sgtable(attach->dev, sgt, dir,
+ DMA_ATTR_SKIP_CPU_SYNC);
+ if (ret) {
sg_free_table(sgt);
kfree(sgt);
- sgt = ERR_PTR(-ENOMEM);
+ sgt = ERR_PTR(ret);
}
return sgt;
}
static void dpu_crtc_disable(struct drm_crtc *crtc,
- struct drm_crtc_state *old_crtc_state)
+ struct drm_atomic_state *state)
{
- struct dpu_crtc *dpu_crtc;
- struct dpu_crtc_state *cstate;
+ struct drm_crtc_state *old_crtc_state = drm_atomic_get_old_crtc_state(state,
+ crtc);
+ struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
+ struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
struct drm_encoder *encoder;
unsigned long flags;
bool release_bandwidth = false;
}
static void dpu_crtc_enable(struct drm_crtc *crtc,
- struct drm_crtc_state *old_crtc_state)
+ struct drm_atomic_state *state)
{
- struct dpu_crtc *dpu_crtc;
+ struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
struct drm_encoder *encoder;
bool request_bandwidth = false;
struct virtio_gpu_transfer_host_3d *cmd_p;
struct virtio_gpu_vbuffer *vbuf;
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
- struct virtio_gpu_object_shmem *shmem = to_virtio_gpu_shmem(bo);
- if (use_dma_api)
+ if (virtio_gpu_is_shmem(bo) && use_dma_api) {
+ struct virtio_gpu_object_shmem *shmem = to_virtio_gpu_shmem(bo);
-
- dma_sync_sg_for_device(vgdev->vdev->dev.parent,
- shmem->pages->sgl, shmem->pages->nents,
- DMA_TO_DEVICE);
+ dma_sync_sgtable_for_device(vgdev->vdev->dev.parent,
+ shmem->pages, DMA_TO_DEVICE);
+ }
cmd_p = virtio_gpu_alloc_cmd(vgdev, &vbuf, sizeof(*cmd_p));
memset(cmd_p, 0, sizeof(*cmd_p));
#define DP_CEC_TX_MESSAGE_BUFFER 0x3020
#define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10
+#define DP_PROTOCOL_CONVERTER_CONTROL_0 0x3050 /* DP 1.3 */
+# define DP_HDMI_DVI_OUTPUT_CONFIG (1 << 0) /* DP 1.3 */
+#define DP_PROTOCOL_CONVERTER_CONTROL_1 0x3051 /* DP 1.3 */
+# define DP_CONVERSION_TO_YCBCR420_ENABLE (1 << 0) /* DP 1.3 */
+# define DP_HDMI_EDID_PROCESSING_DISABLE (1 << 1) /* DP 1.4 */
+# define DP_HDMI_AUTONOMOUS_SCRAMBLING_DISABLE (1 << 2) /* DP 1.4 */
+# define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */
+#define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */
+# define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */
+
+ /* HDCP 1.3 and HDCP 2.2 */
#define DP_AUX_HDCP_BKSV 0x68000
#define DP_AUX_HDCP_RI_PRIME 0x68005
#define DP_AUX_HDCP_AKSV 0x68007