* allocated from first region. If the memory extends to the second
* region (or the third region if applicable), Management Complex (MC)
* memory should be put into the highest region, i.e. the end of DDR
- * memory. CONFIG_MAX_MEM_MAPPED is set to the size of first region so
+ * memory. CFG_MAX_MEM_MAPPED is set to the size of first region so
* U-Boot doesn't relocate itself into higher address. Should DDR be
* configured to skip the first region, this function needs to be
* adjusted.
*/
- if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
- ea_size = CONFIG_MAX_MEM_MAPPED;
+ if (gd->ram_size > CFG_MAX_MEM_MAPPED) {
+ ea_size = CFG_MAX_MEM_MAPPED;
rem = gd->ram_size - ea_size;
} else {
ea_size = gd->ram_size;
/* DDR */
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0x06000000
/* DDR */
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
/* DCFG - GUR */
#define CFG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */
/* DDR */
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
/* Generic Interrupt Controller Definitions */
#define GICD_BASE 0x06000000
/* DDR */
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
/* SEC */
#define CFG_SYS_NUM_FM1_DTSEC 7
#define CFG_SYS_NUM_FM1_10GEC 1
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define GICD_BASE 0x01401000
#define GICC_BASE 0x01402000
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
#elif defined(CONFIG_ARCH_LS1046A)
#define CFG_SYS_NUM_FMAN 1
#define CFG_SYS_NUM_FM1_DTSEC 8
#define CFG_SYS_NUM_FM1_10GEC 2
#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
-#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
+#define CFG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE
/* SMMU Defintions */
#define SMMU_BASE 0x09000000
/* SATA */
#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
#ifdef CONFIG_DDR_SPD
-#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
+#define CFG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#endif
#define DCU_LAYER_MAX_NUM 16
/*
* slide the testing window up to test another area
* for 32_bit system, the maximum testable memory is limited to
- * CONFIG_MAX_MEM_MAPPED
+ * CFG_MAX_MEM_MAPPED
*/
int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
phys_addr_t test_cap, p_addr;
- phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED);
+ phys_size_t p_size = min(gd->ram_size, CFG_MAX_MEM_MAPPED);
#if !defined(CONFIG_PHYS_64BIT) || \
!defined(CFG_SYS_INIT_RAM_ADDR_PHYS) || \
#endif
p_addr = (*vstart) + (*size) + (*phys_offset);
if (p_addr < test_cap - 1) {
- p_size = min(test_cap - p_addr, CONFIG_MAX_MEM_MAPPED);
+ p_size = min(test_cap - p_addr, CFG_MAX_MEM_MAPPED);
if (reset_tlb(p_addr, p_size, phys_offset) == -1)
return -1;
*vstart = CFG_SYS_DDR_SDRAM_BASE;
/* initialization for testing area */
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
- phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED);
+ phys_size_t p_size = min(gd->ram_size, CFG_MAX_MEM_MAPPED);
*vstart = CFG_SYS_DDR_SDRAM_BASE;
- *size = (u32) p_size; /* CONFIG_MAX_MEM_MAPPED < 4G */
+ *size = (u32) p_size; /* CFG_MAX_MEM_MAPPED < 4G */
*phys_offset = 0;
#if !defined(CONFIG_PHYS_64BIT) || \
!defined(CFG_SYS_INIT_RAM_ADDR_PHYS) || \
(CFG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
- if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
+ if (gd->ram_size > CFG_MAX_MEM_MAPPED) {
puts("Cannot test more than ");
- print_size(CONFIG_MAX_MEM_MAPPED,
+ print_size(CFG_MAX_MEM_MAPPED,
" without proper 36BIT support.\n");
}
#endif
/* use last 4K of mapped memory */
- bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
- CONFIG_MAX_MEM_MAPPED : gd->ram_size) +
+ bootpg = ((gd->ram_size > CFG_MAX_MEM_MAPPED) ?
+ CFG_MAX_MEM_MAPPED : gd->ram_size) +
CFG_SYS_SDRAM_BASE - 4096;
if (pagesize)
*pagesize = 4096;
u64 memsize = (u64)memsize_in_meg << 20;
u64 size;
- size = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
+ size = min(memsize, (u64)CFG_MAX_MEM_MAPPED);
size = tlb_map_range(ram_tlb_address, p_addr, size, TLB_MAP_RAM);
- if (size || memsize > CONFIG_MAX_MEM_MAPPED) {
- print_size(memsize > CONFIG_MAX_MEM_MAPPED ?
- memsize - CONFIG_MAX_MEM_MAPPED + size : size,
+ if (size || memsize > CFG_MAX_MEM_MAPPED) {
+ print_size(memsize > CFG_MAX_MEM_MAPPED ?
+ memsize - CFG_MAX_MEM_MAPPED + size : size,
" of DDR memory left unmapped in U-Boot\n");
#ifndef CONFIG_SPL_BUILD
puts(" ");
tbl->start_addr[i] =
(uint64_t)virt_to_phys((void *)CFG_SYS_SDRAM_BASE);
- tbl->size[i] = (phys_size_t)(min(gd->ram_size, CONFIG_MAX_MEM_MAPPED));
+ tbl->size[i] = (phys_size_t)(min(gd->ram_size, CFG_MAX_MEM_MAPPED));
tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1;
i++;
#define HWCONFIG_BUFFER_SIZE 256
#endif
-#ifndef CONFIG_MAX_MEM_MAPPED
+#ifndef CFG_MAX_MEM_MAPPED
#if defined(CONFIG_E500) || \
defined(CONFIG_MPC86xx) || \
defined(CONFIG_E300)
-#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
+#define CFG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#else
-#define CONFIG_MAX_MEM_MAPPED (256 << 20)
+#define CFG_MAX_MEM_MAPPED (256 << 20)
#endif
#endif
* restricting used physical memory to the first 128MB.
*/
#if XCHAL_HAVE_PTP_MMU
-#define CONFIG_MAX_MEM_MAPPED (128 << 20)
+#define CFG_MAX_MEM_MAPPED (128 << 20)
#endif
#endif
case DRA752_ES2_0:
switch (emif_nr) {
case 1:
- if (ram_size > CONFIG_MAX_MEM_MAPPED)
+ if (ram_size > CFG_MAX_MEM_MAPPED)
*regs = &emif1_ddr3_532_mhz_1cs_2G;
else
*regs = &emif1_ddr3_532_mhz_1cs;
break;
case 2:
- if (ram_size > CONFIG_MAX_MEM_MAPPED)
+ if (ram_size > CFG_MAX_MEM_MAPPED)
*regs = &emif2_ddr3_532_mhz_1cs_2G;
else
*regs = &emif2_ddr3_532_mhz_1cs;
case DRA722_ES1_0:
case DRA722_ES2_0:
case DRA722_ES2_1:
- if (ram_size < CONFIG_MAX_MEM_MAPPED)
+ if (ram_size < CFG_MAX_MEM_MAPPED)
*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es1;
else
*regs = &emif_1_regs_ddr3_666_mhz_1cs_dra_es2;
case DRA752_ES1_0:
case DRA752_ES1_1:
case DRA752_ES2_0:
- if (ram_size > CONFIG_MAX_MEM_MAPPED)
+ if (ram_size > CFG_MAX_MEM_MAPPED)
*dmm_lisa_regs = &lisa_map_dra7_2GB;
else
*dmm_lisa_regs = &lisa_map_dra7_1536MB;
case DRA722_ES2_0:
case DRA722_ES2_1:
default:
- if (ram_size < CONFIG_MAX_MEM_MAPPED)
+ if (ram_size < CFG_MAX_MEM_MAPPED)
*dmm_lisa_regs = &lisa_map_2G_x_2;
else
*dmm_lisa_regs = &lisa_map_2G_x_4;
gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = get_effective_memsize();
- if (ram_size > CONFIG_MAX_MEM_MAPPED) {
+ if (ram_size > CFG_MAX_MEM_MAPPED) {
gd->bd->bi_dram[1].start = 0x200000000;
- gd->bd->bi_dram[1].size = ram_size - CONFIG_MAX_MEM_MAPPED;
+ gd->bd->bi_dram[1].size = ram_size - CFG_MAX_MEM_MAPPED;
}
return 0;
if (gd->ram_base + ram_size < gd->ram_base)
ram_size = ((phys_size_t)~0xfffULL) - gd->ram_base;
-#ifndef CONFIG_MAX_MEM_MAPPED
+#ifndef CFG_MAX_MEM_MAPPED
return ram_size;
#else
/* limit stack to what we can reasonable map */
- return ((ram_size > CONFIG_MAX_MEM_MAPPED) ?
- CONFIG_MAX_MEM_MAPPED : ram_size);
+ return ((ram_size > CFG_MAX_MEM_MAPPED) ?
+ CFG_MAX_MEM_MAPPED : ram_size);
#endif
}
}
#if !defined(CONFIG_PHYS_64BIT)
- if (base >= CONFIG_MAX_MEM_MAPPED)
+ if (base >= CFG_MAX_MEM_MAPPED)
return;
- if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
- size = CONFIG_MAX_MEM_MAPPED - base;
+ if ((base + size) >= CFG_MAX_MEM_MAPPED)
+ size = CFG_MAX_MEM_MAPPED - base;
#endif
if (set_ddr_laws(base, size, law_memctl) < 0) {
printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
#include <environment/ti/dfu.h>
-#define CONFIG_MAX_MEM_MAPPED 0x80000000
+#define CFG_MAX_MEM_MAPPED 0x80000000
#ifndef CONFIG_QSPI_BOOT
/* MMC ENV related defines */
#define CFG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_MAX_MEM_MAPPED 0x1c000000
+#define CFG_MAX_MEM_MAPPED 0x1c000000
#define CFG_SYS_INIT_SP_OFFSET 0x800000
#define DRAM_RSV_SIZE 0x08000000
#define CFG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE)
#define CFG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE)
-#define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE)
+#define CFG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE)
/* ENV setting */
#define CFG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
-#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
+#define CFG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */
#else
#define CFG_SYS_MEMORY_BASE 0x60000000
#define CFG_SYS_IO_BASE 0x90000000
-#define CONFIG_MAX_MEM_MAPPED 0x10000000
+#define CFG_MAX_MEM_MAPPED 0x10000000
#endif
/* Onboard RAM sizes:
/* Memory test is destructive so default must not overlap vectors or U-Boot*/
-#if defined(CONFIG_MAX_MEM_MAPPED) && \
- CONFIG_MAX_MEM_MAPPED < CFG_SYS_SDRAM_SIZE
+#if defined(CFG_MAX_MEM_MAPPED) && \
+ CFG_MAX_MEM_MAPPED < CFG_SYS_SDRAM_SIZE
#define XTENSA_SYS_TEXT_ADDR \
- (MEMADDR(CONFIG_MAX_MEM_MAPPED) - CONFIG_SYS_MONITOR_LEN)
+ (MEMADDR(CFG_MAX_MEM_MAPPED) - CONFIG_SYS_MONITOR_LEN)
#else
#define XTENSA_SYS_TEXT_ADDR \
(MEMADDR(CFG_SYS_SDRAM_SIZE) - CONFIG_SYS_MONITOR_LEN)