net: phy: marvell: Add support for amplitude graph

The Marvell PHYs can measure the amplitude of the returned signal for
a given distance. Implement this option of the cable test
infrastructure. When reporting the step, convert the distance into cm.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
v2:
Step based on the measurement resolution, and convert this to cm.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4bc7febf9248a387aa2b0ec9fbdd26c2ea731497..e597bee2e966539a51ceeb119fad90df2f362330 100644 (file)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -42,6 +42,7 @@
 #define MII_MARVELL_FIBER_PAGE         0x01
 #define MII_MARVELL_MSCR_PAGE          0x02
 #define MII_MARVELL_LED_PAGE           0x03
+#define MII_MARVELL_VCT5_PAGE          0x05
 #define MII_MARVELL_MISC_TEST_PAGE     0x06
 #define MII_MARVELL_VCT7_PAGE          0x07
 #define MII_MARVELL_WOL_PAGE           0x11
@@ -164,6 +165,54 @@
 #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII  0x1     /* SGMII to copper */
 #define MII_88E1510_GEN_CTRL_REG_1_RESET       0x8000  /* Soft reset */
 
+#define MII_VCT5_TX_RX_MDI0_COUPLING   0x10
+#define MII_VCT5_TX_RX_MDI1_COUPLING   0x11
+#define MII_VCT5_TX_RX_MDI2_COUPLING   0x12
+#define MII_VCT5_TX_RX_MDI3_COUPLING   0x13
+#define MII_VCT5_TX_RX_AMPLITUDE_MASK  0x7f00
+#define MII_VCT5_TX_RX_AMPLITUDE_SHIFT 8
+#define MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION    BIT(15)
+
+#define MII_VCT5_CTRL                          0x17
+#define MII_VCT5_CTRL_ENABLE                           BIT(15)
+#define MII_VCT5_CTRL_COMPLETE                         BIT(14)
+#define MII_VCT5_CTRL_TX_SAME_CHANNEL                  (0x0 << 11)
+#define MII_VCT5_CTRL_TX0_CHANNEL                      (0x4 << 11)
+#define MII_VCT5_CTRL_TX1_CHANNEL                      (0x5 << 11)
+#define MII_VCT5_CTRL_TX2_CHANNEL                      (0x6 << 11)
+#define MII_VCT5_CTRL_TX3_CHANNEL                      (0x7 << 11)
+#define MII_VCT5_CTRL_SAMPLES_2                                (0x0 << 8)
+#define MII_VCT5_CTRL_SAMPLES_4                                (0x1 << 8)
+#define MII_VCT5_CTRL_SAMPLES_8                                (0x2 << 8)
+#define MII_VCT5_CTRL_SAMPLES_16                       (0x3 << 8)
+#define MII_VCT5_CTRL_SAMPLES_32                       (0x4 << 8)
+#define MII_VCT5_CTRL_SAMPLES_64                       (0x5 << 8)
+#define MII_VCT5_CTRL_SAMPLES_128                      (0x6 << 8)
+#define MII_VCT5_CTRL_SAMPLES_DEFAULT                  (0x6 << 8)
+#define MII_VCT5_CTRL_SAMPLES_256                      (0x7 << 8)
+#define MII_VCT5_CTRL_SAMPLES_SHIFT                    8
+#define MII_VCT5_CTRL_MODE_MAXIMUM_PEEK                        (0x0 << 6)
+#define MII_VCT5_CTRL_MODE_FIRST_LAST_PEEK             (0x1 << 6)
+#define MII_VCT5_CTRL_MODE_OFFSET                      (0x2 << 6)
+#define MII_VCT5_CTRL_SAMPLE_POINT                     (0x3 << 6)
+#define MII_VCT5_CTRL_PEEK_HYST_DEFAULT                        3
+
+#define MII_VCT5_SAMPLE_POINT_DISTANCE         0x18
+#define MII_VCT5_TX_PULSE_CTRL                 0x1c
+#define MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN     BIT(12)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS       (0x0 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_96nS                (0x1 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_64nS                (0x2 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS                (0x3 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_SHIFT       10
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_1000mV  (0x0 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_750mV   (0x1 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_500mV   (0x2 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_250mV   (0x3 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_SHIFT   8
+#define MII_VCT5_TX_PULSE_CTRL_MAX_AMP                 BIT(7)
+#define MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV         (0x6 << 0)
+
 #define MII_VCT7_PAIR_0_DISTANCE       0x10
 #define MII_VCT7_PAIR_1_DISTANCE       0x11
 #define MII_VCT7_PAIR_2_DISTANCE       0x12
@@ -220,6 +269,7 @@ struct marvell_priv {
        u64 stats[ARRAY_SIZE(marvell_hw_stats)];
        char *hwmon_name;
        struct device *hwmon_dev;
+       bool cable_test_tdr;
 };
 
 static int marvell_read_page(struct phy_device *phydev)
@@ -1690,7 +1740,119 @@ static void marvell_get_stats(struct phy_device *phydev,
                data[i] = marvell_get_stat(phydev, i);
 }
 
-static int marvell_vct7_cable_test_start(struct phy_device *phydev)
+static int marvell_vct5_wait_complete(struct phy_device *phydev)
+{
+       int i;
+       int val;
+
+       for (i = 0; i < 32; i++) {
+               val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE,
+                                    MII_VCT5_CTRL);
+               if (val < 0)
+                       return val;
+
+               if (val & MII_VCT5_CTRL_COMPLETE)
+                       return 0;
+
+               usleep_range(1000, 2000);
+       }
+
+       phydev_err(phydev, "Timeout while waiting for cable test to finish\n");
+       return -ETIMEDOUT;
+}
+
+static int marvell_vct5_amplitude(struct phy_device *phydev, int pair)
+{
+       int amplitude;
+       int val;
+       int reg;
+
+       reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair;
+       val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE, reg);
+
+       if (val < 0)
+               return 0;
+
+       amplitude = (val & MII_VCT5_TX_RX_AMPLITUDE_MASK) >>
+               MII_VCT5_TX_RX_AMPLITUDE_SHIFT;
+
+       if (!(val & MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION))
+               amplitude = -amplitude;
+
+       return 1000 * amplitude / 128;
+}
+
+static u32 marvell_vct5_distance2cm(int distance)
+{
+       return distance * 805 / 10;
+}
+
+static int marvell_vct5_amplitude_distance(struct phy_device *phydev,
+                                          int distance)
+{
+       int mV_pair0, mV_pair1, mV_pair2, mV_pair3;
+       u16 reg;
+       int err;
+
+       err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+                             MII_VCT5_SAMPLE_POINT_DISTANCE,
+                             distance);
+       if (err)
+               return err;
+
+       reg = MII_VCT5_CTRL_ENABLE |
+               MII_VCT5_CTRL_TX_SAME_CHANNEL |
+               MII_VCT5_CTRL_SAMPLES_DEFAULT |
+               MII_VCT5_CTRL_SAMPLE_POINT |
+               MII_VCT5_CTRL_PEEK_HYST_DEFAULT;
+       err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+                             MII_VCT5_CTRL, reg);
+       if (err)
+               return err;
+
+       err = marvell_vct5_wait_complete(phydev);
+       if (err)
+               return err;
+
+       mV_pair0 = marvell_vct5_amplitude(phydev, 0);
+       mV_pair1 = marvell_vct5_amplitude(phydev, 1);
+       mV_pair2 = marvell_vct5_amplitude(phydev, 2);
+       mV_pair3 = marvell_vct5_amplitude(phydev, 3);
+
+       ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_A, mV_pair0);
+       ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_B, mV_pair1);
+       ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_C, mV_pair2);
+       ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_D, mV_pair3);
+
+       return 0;
+}
+
+static int marvell_vct5_amplitude_graph(struct phy_device *phydev)
+{
+       int distance;
+       int err;
+       u16 reg;
+
+       reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV |
+               MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN |
+               MII_VCT5_TX_PULSE_CTRL_MAX_AMP |
+               MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS;
+
+       err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+                             MII_VCT5_TX_PULSE_CTRL, reg);
+       if (err)
+               return err;
+
+       for (distance = 0; distance <= 100; distance++) {
+               err = marvell_vct5_amplitude_distance(phydev, distance);
+               if (err)
+                       return err;
+       }
+
+       return 0;
+}
+
+static int marvell_cable_test_start_common(struct phy_device *phydev)
 {
        int bmcr, bmsr, ret;
 
@@ -1719,12 +1881,69 @@ static int marvell_vct7_cable_test_start(struct phy_device *phydev)
        if (bmsr & BMSR_LSTATUS)
                msleep(1500);
 
+       return 0;
+}
+
+static int marvell_vct7_cable_test_start(struct phy_device *phydev)
+{
+       struct marvell_priv *priv = phydev->priv;
+       int ret;
+
+       ret = marvell_cable_test_start_common(phydev);
+       if (ret)
+               return ret;
+
+       priv->cable_test_tdr = false;
+
+       /* Reset the VCT5 API control to defaults, otherwise
+        * VCT7 does not work correctly.
+        */
+       ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+                             MII_VCT5_CTRL,
+                             MII_VCT5_CTRL_TX_SAME_CHANNEL |
+                             MII_VCT5_CTRL_SAMPLES_DEFAULT |
+                             MII_VCT5_CTRL_MODE_MAXIMUM_PEEK |
+                             MII_VCT5_CTRL_PEEK_HYST_DEFAULT);
+       if (ret)
+               return ret;
+
+       ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+                             MII_VCT5_SAMPLE_POINT_DISTANCE, 0);
+       if (ret)
+               return ret;
+
        return phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
                               MII_VCT7_CTRL,
                               MII_VCT7_CTRL_RUN_NOW |
                               MII_VCT7_CTRL_CENTIMETERS);
 }
 
+static int marvell_vct5_cable_test_tdr_start(struct phy_device *phydev)
+{
+       struct marvell_priv *priv = phydev->priv;
+       int ret;
+
+       /* Disable  VCT7 */
+       ret = phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
+                             MII_VCT7_CTRL, 0);
+       if (ret)
+               return ret;
+
+       ret = marvell_cable_test_start_common(phydev);
+       if (ret)
+               return ret;
+
+       priv->cable_test_tdr = true;
+       ret = ethnl_cable_test_pulse(phydev, 1000);
+       if (ret)
+               return ret;
+
+       return ethnl_cable_test_step(phydev,
+                                    marvell_vct5_distance2cm(0),
+                                    marvell_vct5_distance2cm(100),
+                                    marvell_vct5_distance2cm(1));
+}
+
 static int marvell_vct7_distance_to_length(int distance, bool meter)
 {
        if (meter)
@@ -1828,8 +2047,15 @@ static int marvell_vct7_cable_test_report(struct phy_device *phydev)
 static int marvell_vct7_cable_test_get_status(struct phy_device *phydev,
                                              bool *finished)
 {
+       struct marvell_priv *priv = phydev->priv;
        int ret;
 
+       if (priv->cable_test_tdr) {
+               ret = marvell_vct5_amplitude_graph(phydev);
+               *finished = true;
+               return ret;
+       }
+
        *finished = false;
 
        ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE,
@@ -2563,6 +2789,7 @@ static struct phy_driver marvell_drivers[] = {
                .get_tunable = m88e1011_get_tunable,
                .set_tunable = m88e1011_set_tunable,
                .cable_test_start = marvell_vct7_cable_test_start,
+               .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
                .cable_test_get_status = marvell_vct7_cable_test_get_status,
        },
        {
@@ -2588,6 +2815,7 @@ static struct phy_driver marvell_drivers[] = {
                .get_tunable = m88e1540_get_tunable,
                .set_tunable = m88e1540_set_tunable,
                .cable_test_start = marvell_vct7_cable_test_start,
+               .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
                .cable_test_get_status = marvell_vct7_cable_test_get_status,
        },
        {
@@ -2613,6 +2841,7 @@ static struct phy_driver marvell_drivers[] = {
                .get_tunable = m88e1540_get_tunable,
                .set_tunable = m88e1540_set_tunable,
                .cable_test_start = marvell_vct7_cable_test_start,
+               .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
                .cable_test_get_status = marvell_vct7_cable_test_get_status,
        },
        {
@@ -2658,6 +2887,7 @@ static struct phy_driver marvell_drivers[] = {
                .get_tunable = m88e1540_get_tunable,
                .set_tunable = m88e1540_set_tunable,
                .cable_test_start = marvell_vct7_cable_test_start,
+               .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
                .cable_test_get_status = marvell_vct7_cable_test_get_status,
        },
 };