This relies on the old LCD implementation which is to be removed. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
&cmper->usb0clkctrl,
&cmper->emiffwclkctrl,
&cmper->emifclkctrl,
-#if CONFIG_IS_ENABLED(AM335X_LCD) && !CONFIG_IS_ENABLED(DM_VIDEO)
- &cmper->lcdclkctrl,
- &cmper->lcdcclkstctrl,
-#endif
0
};
brightness != 0 ? 0x0A : 0x02, 0xFF);
}
-#if IS_ENABLED(CONFIG_AM335X_LCD)
-static void splash_screen(void)
-{
- struct udevice *video_dev;
- struct udevice *console_dev;
- struct video_priv *vid_priv;
- struct mtd_info *mtd;
- size_t len;
- int ret;
-
- struct mtd_device *mtd_dev;
- struct part_info *part;
- u8 pnum;
-
- ret = uclass_get_device(UCLASS_VIDEO, 0, &video_dev);
- if (ret != 0) {
- debug("video device not found\n");
- goto exit;
- }
-
- vid_priv = dev_get_uclass_priv(video_dev);
- mtdparts_init();
-
- if (find_dev_and_part(SPLASH_SCREEN_NAND_PART, &mtd_dev, &pnum, &part)) {
- debug("Could not find nand partition\n");
- goto splash_screen_text;
- }
-
- mtd = get_nand_dev_by_index(mtd_dev->id->num);
- if (!mtd) {
- debug("MTD partition is not valid\n");
- goto splash_screen_text;
- }
-
- len = SPLASH_SCREEN_BMP_FILE_SIZE;
- ret = nand_read_skip_bad(mtd, part->offset, &len, NULL,
- SPLASH_SCREEN_BMP_FILE_SIZE,
- (u_char *)SPLASH_SCREEN_BMP_LOAD_ADDR);
- if (ret != 0) {
- debug("Reading NAND partition failed\n");
- goto splash_screen_text;
- }
-
- ret = video_bmp_display(video_dev, SPLASH_SCREEN_BMP_LOAD_ADDR, 0, 0, false);
- if (ret != 0) {
- debug("No valid bmp image found!!\n");
- goto splash_screen_text;
- } else {
- goto exit;
- }
-
-splash_screen_text:
- vid_priv->colour_fg = CONSOLE_COLOR_RED;
- vid_priv->colour_bg = CONSOLE_COLOR_BLACK;
-
- if (!uclass_first_device_err(UCLASS_VIDEO_CONSOLE, &console_dev)) {
- debug("Found console\n");
- vidconsole_position_cursor(console_dev, 17, 7);
- vidconsole_put_string(console_dev, SPLASH_SCREEN_TEXT);
- } else {
- debug("No console device found\n");
- }
-
-exit:
- return;
-}
-#endif /* CONFIG_AM335X_LCD */
-
int board_late_init(void)
{
int ret;
return 0;
lcdbacklight_en();
- if (IS_ENABLED(CONFIG_AM335X_LCD))
- splash_screen();
return 0;
}
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
CONFIG_USB_ETHER=y
CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_AM335X_LCD=y
CONFIG_BMP_16BPP=y
CONFIG_SPL_WDT=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
help
HLCDC supports video output to an attached LCD panel.
-source "drivers/video/ti/Kconfig"
-
source "drivers/video/exynos/Kconfig"
config LOGICORE_DP_TX
obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
obj-${CONFIG_VIDEO_STM32} += stm32/
obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
-obj-y += ti/
obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
-#
-config AM335X_LCD
- bool "Enable AM335x video support"
- help
- Supports video output to an attached LCD panel.
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
-#
-
-ifdef CONFIG_DM_VIDEO
-obj-$(CONFIG_AM335X_LCD) += tilcdc.o tilcdc-panel.o
-else
-obj-$(CONFIG_AM335X_LCD) += am335x-fb.o
-endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at>
- * B&R Industrial Automation GmbH - http://www.br-automation.com
- * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
- *
- * minimal framebuffer driver for TI's AM335x SoC to be compatible with
- * Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
- *
- * - supporting 16/24/32bit RGB/TFT raster Mode (not using palette)
- * - sets up LCD controller as in 'am335x_lcdpanel' struct given
- * - starts output DMA from gd->fb_base buffer
- */
-#include <common.h>
-#include <lcd.h>
-#include <log.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include "am335x-fb.h"
-
-#define LCDC_FMAX 200000000
-
-/* LCD Control Register */
-#define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8)
-#define LCDC_CTRL_RASTER_MODE BIT(0)
-#define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8)
-/* LCD Clock Enable Register */
-#define LCDC_CLKC_ENABLE_CORECLKEN BIT(0)
-#define LCDC_CLKC_ENABLE_LIDDCLKEN BIT(1)
-#define LCDC_CLKC_ENABLE_DMACLKEN BIT(2)
-/* LCD DMA Control Register */
-#define LCDC_DMA_CTRL_BURST_SIZE(x) (((x) & GENMASK(2, 0)) << 4)
-#define LCDC_DMA_CTRL_BURST_1 0x0
-#define LCDC_DMA_CTRL_BURST_2 0x1
-#define LCDC_DMA_CTRL_BURST_4 0x2
-#define LCDC_DMA_CTRL_BURST_8 0x3
-#define LCDC_DMA_CTRL_BURST_16 0x4
-#define LCDC_DMA_CTRL_FIFO_TH(x) (((x) & GENMASK(2, 0)) << 8)
-/* LCD Timing_0 Register */
-#define LCDC_RASTER_TIMING_0_HORMSB(x) ((((x) - 1) & BIT(10)) >> 7)
-#define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4)
-#define LCDC_RASTER_TIMING_0_HSWLSB(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
-#define LCDC_RASTER_TIMING_0_HFPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 16)
-#define LCDC_RASTER_TIMING_0_HBPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 24)
-/* LCD Timing_1 Register */
-#define LCDC_RASTER_TIMING_1_VERLSB(x) (((x) - 1) & GENMASK(9, 0))
-#define LCDC_RASTER_TIMING_1_VSW(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
-#define LCDC_RASTER_TIMING_1_VFP(x) (((x) & GENMASK(7, 0)) << 16)
-#define LCDC_RASTER_TIMING_1_VBP(x) (((x) & GENMASK(7, 0)) << 24)
-/* LCD Timing_2 Register */
-#define LCDC_RASTER_TIMING_2_HFPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 8)
-#define LCDC_RASTER_TIMING_2_HBPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 4)
-#define LCDC_RASTER_TIMING_2_ACB(x) (((x) & GENMASK(7, 0)) << 8)
-#define LCDC_RASTER_TIMING_2_ACBI(x) (((x) & GENMASK(3, 0)) << 16)
-#define LCDC_RASTER_TIMING_2_VSYNC_INVERT BIT(20)
-#define LCDC_RASTER_TIMING_2_HSYNC_INVERT BIT(21)
-#define LCDC_RASTER_TIMING_2_PXCLK_INVERT BIT(22)
-#define LCDC_RASTER_TIMING_2_DE_INVERT BIT(23)
-#define LCDC_RASTER_TIMING_2_HSVS_RISEFALL BIT(24)
-#define LCDC_RASTER_TIMING_2_HSVS_CONTROL BIT(25)
-#define LCDC_RASTER_TIMING_2_VERMSB(x) ((((x) - 1) & BIT(10)) << 16)
-#define LCDC_RASTER_TIMING_2_HSWMSB(x) ((((x) - 1) & GENMASK(9, 6)) << 21)
-/* LCD Raster Ctrl Register */
-#define LCDC_RASTER_CTRL_ENABLE BIT(0)
-#define LCDC_RASTER_CTRL_TFT_MODE BIT(7)
-#define LCDC_RASTER_CTRL_DATA_ORDER BIT(8)
-#define LCDC_RASTER_CTRL_REQDLY(x) (((x) & GENMASK(7, 0)) << 12)
-#define LCDC_RASTER_CTRL_PALMODE_RAWDATA (0x02 << 20)
-#define LCDC_RASTER_CTRL_TFT_ALT_ENABLE BIT(23)
-#define LCDC_RASTER_CTRL_TFT_24BPP_MODE BIT(25)
-#define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK BIT(26)
-
-struct am335x_lcdhw {
- unsigned int pid; /* 0x00 */
- unsigned int ctrl; /* 0x04 */
- unsigned int gap0; /* 0x08 */
- unsigned int lidd_ctrl; /* 0x0C */
- unsigned int lidd_cs0_conf; /* 0x10 */
- unsigned int lidd_cs0_addr; /* 0x14 */
- unsigned int lidd_cs0_data; /* 0x18 */
- unsigned int lidd_cs1_conf; /* 0x1C */
- unsigned int lidd_cs1_addr; /* 0x20 */
- unsigned int lidd_cs1_data; /* 0x24 */
- unsigned int raster_ctrl; /* 0x28 */
- unsigned int raster_timing0; /* 0x2C */
- unsigned int raster_timing1; /* 0x30 */
- unsigned int raster_timing2; /* 0x34 */
- unsigned int raster_subpanel; /* 0x38 */
- unsigned int raster_subpanel2; /* 0x3C */
- unsigned int lcddma_ctrl; /* 0x40 */
- unsigned int lcddma_fb0_base; /* 0x44 */
- unsigned int lcddma_fb0_ceiling; /* 0x48 */
- unsigned int lcddma_fb1_base; /* 0x4C */
- unsigned int lcddma_fb1_ceiling; /* 0x50 */
- unsigned int sysconfig; /* 0x54 */
- unsigned int irqstatus_raw; /* 0x58 */
- unsigned int irqstatus; /* 0x5C */
- unsigned int irqenable_set; /* 0x60 */
- unsigned int irqenable_clear; /* 0x64 */
- unsigned int gap1; /* 0x68 */
- unsigned int clkc_enable; /* 0x6C */
- unsigned int clkc_reset; /* 0x70 */
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(LCD_CNTL_BASE)
-#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
-#endif
-
-/* Macro definitions */
-#define FBSIZE(x) (((x)->hactive * (x)->vactive * (x)->bpp) >> 3)
-
-#define LCDC_RASTER_TIMING_2_INVMASK(x) ((x) & GENMASK(25, 20))
-
-static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
-
-int lcd_get_size(int *line_length)
-{
- *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
- return *line_length * panel_info.vl_row + 0x20;
-}
-
-struct dpll_data {
- unsigned long rounded_rate;
- u16 rounded_m;
- u8 rounded_n;
- u8 rounded_div;
-};
-
-/**
- * am335x_dpll_round_rate() - Round a target rate for an OMAP DPLL
- *
- * @dpll_data: struct dpll_data pointer for the DPLL
- * @rate: New DPLL clock rate
- * Return: rounded rate and the computed m, n and div values in the dpll_data
- * structure, or -ve error code.
- */
-static ulong am335x_dpll_round_rate(struct dpll_data *dd, ulong rate)
-{
- unsigned int m, n, d;
- unsigned long rounded_rate;
- int err, err_r;
-
- dd->rounded_rate = -EFAULT;
- err = rate;
- err_r = err;
-
- for (d = 2; err && d < 255; d++) {
- for (m = 2; m < 2047; m++) {
- if ((V_OSCK * m) < (rate * d))
- continue;
-
- n = (V_OSCK * m) / (rate * d);
- if (n > 127)
- break;
-
- if (((V_OSCK * m) / n) > LCDC_FMAX)
- break;
-
- rounded_rate = (V_OSCK * m) / n / d;
- err = abs(rounded_rate - rate);
- if (err < err_r) {
- err_r = err;
- dd->rounded_rate = rounded_rate;
- dd->rounded_m = m;
- dd->rounded_n = n;
- dd->rounded_div = d;
- if (err == 0)
- break;
- }
- }
- }
-
- debug("DPLL display: best error %d Hz (M %d, N %d, DIV %d)\n",
- err_r, dd->rounded_m, dd->rounded_n, dd->rounded_div);
-
- return dd->rounded_rate;
-}
-
-/**
- * am335x_fb_set_pixel_clk_rate() - Set pixel clock rate.
- *
- * @am335x_lcdhw: Base address of the LCD controller registers.
- * @rate: New clock rate in Hz.
- * Return: new rate, or -ve error code.
- */
-static ulong am335x_fb_set_pixel_clk_rate(struct am335x_lcdhw *regs, ulong rate)
-{
- struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 };
- struct dpll_data dd;
- ulong round_rate;
- u32 reg;
-
- round_rate = am335x_dpll_round_rate(&dd, rate);
- if (IS_ERR_VALUE(round_rate))
- return round_rate;
-
- dpll_disp.m = dd.rounded_m;
- dpll_disp.n = dd.rounded_n;
- do_setup_dpll(&dpll_disp_regs, &dpll_disp);
-
- reg = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
- reg |= LCDC_CTRL_CLK_DIVISOR(dd.rounded_div);
- writel(reg, ®s->ctrl);
- return round_rate;
-}
-
-int am335xfb_init(struct am335x_lcdpanel *panel)
-{
- u32 raster_ctrl = 0;
- struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
- ulong rate;
- u32 reg;
-
- if (gd->fb_base == 0) {
- printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n");
- return -1;
- }
- if (panel == NULL) {
- printf("ERROR: missing ptr to am335x_lcdpanel!\n");
- return -1;
- }
-
- /* We can already set the bits for the raster_ctrl in this check */
- switch (panel->bpp) {
- case 16:
- break;
- case 32:
- raster_ctrl |= LCDC_RASTER_CTRL_TFT_24BPP_UNPACK;
- /* fallthrough */
- case 24:
- raster_ctrl |= LCDC_RASTER_CTRL_TFT_24BPP_MODE;
- break;
- default:
- pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
- return -1;
- }
-
- /* check given clock-frequency */
- if (panel->pxl_clk > (LCDC_FMAX / 2)) {
- pr_err("am335x-fb: requested pxl-clk: %d not supported!\n",
- panel->pxl_clk);
- return -1;
- }
-
- debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ",
- panel->hactive, panel->vactive, panel->bpp,
- panel->hfp, panel->hbp, panel->hsw);
- debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n",
- panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk);
- debug("using frambuffer at 0x%08x with size %d.\n",
- (unsigned int)gd->fb_base, FBSIZE(panel));
-
- rate = am335x_fb_set_pixel_clk_rate(lcdhw, panel->pxl_clk);
- if (IS_ERR_VALUE(rate))
- return rate;
-
- /* clock source for LCDC from dispPLL M2 */
- writel(0x0, &cmdpll->clklcdcpixelclk);
-
- /* palette default entry */
- memset((void *)gd->fb_base, 0, 0x20);
- *(unsigned int *)gd->fb_base = 0x4000;
- /* point fb behind palette */
- gd->fb_base += 0x20;
-
- /* turn ON display through powercontrol function if accessible */
- if (panel->panel_power_ctrl != NULL)
- panel->panel_power_ctrl(1);
-
- debug("am335x-fb: wait for stable power ...\n");
- mdelay(panel->pup_delay);
- lcdhw->clkc_enable = LCDC_CLKC_ENABLE_CORECLKEN |
- LCDC_CLKC_ENABLE_LIDDCLKEN | LCDC_CLKC_ENABLE_DMACLKEN;
- lcdhw->raster_ctrl = 0;
-
- reg = lcdhw->ctrl & LCDC_CTRL_CLK_DIVISOR_MASK;
- reg |= LCDC_CTRL_RASTER_MODE;
- lcdhw->ctrl = reg;
-
- lcdhw->lcddma_fb0_base = gd->fb_base;
- lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel);
- lcdhw->lcddma_fb1_base = gd->fb_base;
- lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel);
- lcdhw->lcddma_ctrl = LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16);
-
- lcdhw->raster_timing0 = LCDC_RASTER_TIMING_0_HORLSB(panel->hactive) |
- LCDC_RASTER_TIMING_0_HORMSB(panel->hactive) |
- LCDC_RASTER_TIMING_0_HFPLSB(panel->hfp) |
- LCDC_RASTER_TIMING_0_HBPLSB(panel->hbp) |
- LCDC_RASTER_TIMING_0_HSWLSB(panel->hsw);
- lcdhw->raster_timing1 = LCDC_RASTER_TIMING_1_VBP(panel->vbp) |
- LCDC_RASTER_TIMING_1_VFP(panel->vfp) |
- LCDC_RASTER_TIMING_1_VSW(panel->vsw) |
- LCDC_RASTER_TIMING_1_VERLSB(panel->vactive);
- lcdhw->raster_timing2 = LCDC_RASTER_TIMING_2_HSWMSB(panel->hsw) |
- LCDC_RASTER_TIMING_2_VERMSB(panel->vactive) |
- LCDC_RASTER_TIMING_2_INVMASK(panel->pol) |
- LCDC_RASTER_TIMING_2_HBPMSB(panel->hbp) |
- LCDC_RASTER_TIMING_2_HFPMSB(panel->hfp) |
- 0x0000FF00; /* clk cycles for ac-bias */
- lcdhw->raster_ctrl = raster_ctrl |
- LCDC_RASTER_CTRL_PALMODE_RAWDATA |
- LCDC_RASTER_CTRL_TFT_MODE |
- LCDC_RASTER_CTRL_ENABLE;
-
- debug("am335x-fb: waiting picture to be stable.\n.");
- mdelay(panel->pon_delay);
-
- return 0;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at> -
- * B&R Industrial Automation GmbH - http://www.br-automation.com
- */
-
-#ifndef AM335X_FB_H
-#define AM335X_FB_H
-
-#define HSVS_CONTROL BIT(25) /*
- * 0 = lcd_lp and lcd_fp are driven on
- * opposite edges of pixel clock than
- * the lcd_pixel_o
- * 1 = lcd_lp and lcd_fp are driven
- * according to bit 24 Note that this
- * bit MUST be set to '0' for Passive
- * Matrix displays the edge timing is
- * fixed
- */
-#define HSVS_RISEFALL BIT(24) /*
- * 0 = lcd_lp and lcd_fp are driven on
- * the rising edge of pixel clock (bit
- * 25 must be set to 1)
- * 1 = lcd_lp and lcd_fp are driven on
- * the falling edge of pixel clock (bit
- * 25 must be set to 1)
- */
-#define DE_INVERT BIT(23) /*
- * 0 = DE is low-active
- * 1 = DE is high-active
- */
-#define PXCLK_INVERT BIT(22) /*
- * 0 = pix-clk is high-active
- * 1 = pic-clk is low-active
- */
-#define HSYNC_INVERT BIT(21) /*
- * 0 = HSYNC is active high
- * 1 = HSYNC is avtive low
- */
-#define VSYNC_INVERT BIT(20) /*
- * 0 = VSYNC is active high
- * 1 = VSYNC is active low
- */
-
-struct am335x_lcdpanel {
- unsigned int hactive; /* Horizontal active area */
- unsigned int vactive; /* Vertical active area */
- unsigned int bpp; /* bits per pixel */
- unsigned int hfp; /* Horizontal front porch */
- unsigned int hbp; /* Horizontal back porch */
- unsigned int hsw; /* Horizontal Sync Pulse Width */
- unsigned int vfp; /* Vertical front porch */
- unsigned int vbp; /* Vertical back porch */
- unsigned int vsw; /* Vertical Sync Pulse Width */
- unsigned int pxl_clk; /* Pixel clock */
- unsigned int pol; /* polarity of sync, clock signals */
- unsigned int pup_delay; /*
- * time in ms after power on to
- * initialization of lcd-controller
- * (VCC ramp up time)
- */
- unsigned int pon_delay; /*
- * time in ms after initialization of
- * lcd-controller (pic stabilization)
- */
- void (*panel_power_ctrl)(int); /* fp for power on/off display */
-};
-
-int am335xfb_init(struct am335x_lcdpanel *panel);
-
-#endif /* AM335X_FB_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * OMAP panel support
- *
- * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
- */
-
-#include <common.h>
-#include <backlight.h>
-#include <clk.h>
-#include <display.h>
-#include <dm.h>
-#include <dm/device_compat.h>
-#include <log.h>
-#include <panel.h>
-#include <asm/gpio.h>
-#include <linux/err.h>
-#include "tilcdc.h"
-
-struct tilcdc_panel_priv {
- struct tilcdc_panel_info info;
- struct display_timing timing;
- struct udevice *backlight;
- struct gpio_desc enable;
-};
-
-static int tilcdc_panel_enable_backlight(struct udevice *dev)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
-
- if (dm_gpio_is_valid(&priv->enable))
- dm_gpio_set_value(&priv->enable, 1);
-
- if (priv->backlight)
- return backlight_enable(priv->backlight);
-
- return 0;
-}
-
-static int tilcdc_panel_set_backlight(struct udevice *dev, int percent)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
-
- if (dm_gpio_is_valid(&priv->enable))
- dm_gpio_set_value(&priv->enable, 1);
-
- if (priv->backlight)
- return backlight_set_brightness(priv->backlight, percent);
-
- return 0;
-}
-
-int tilcdc_panel_get_display_info(struct udevice *dev,
- struct tilcdc_panel_info *info)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
-
- memcpy(info, &priv->info, sizeof(*info));
- return 0;
-}
-
-static int tilcdc_panel_get_display_timing(struct udevice *dev,
- struct display_timing *timing)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
-
- memcpy(timing, &priv->timing, sizeof(*timing));
- return 0;
-}
-
-static int tilcdc_panel_remove(struct udevice *dev)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
-
- if (dm_gpio_is_valid(&priv->enable))
- dm_gpio_free(dev, &priv->enable);
-
- return 0;
-}
-
-static int tilcdc_panel_probe(struct udevice *dev)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
- int err;
-
- err = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
- "backlight", &priv->backlight);
- if (err)
- dev_warn(dev, "failed to get backlight\n");
-
- err = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable,
- GPIOD_IS_OUT);
- if (err) {
- dev_warn(dev, "failed to get enable GPIO\n");
- if (err != -ENOENT)
- return err;
- }
-
- return 0;
-}
-
-static int tilcdc_panel_of_to_plat(struct udevice *dev)
-{
- struct tilcdc_panel_priv *priv = dev_get_priv(dev);
- ofnode node;
- int err;
-
- err = ofnode_decode_display_timing(dev_ofnode(dev), 0, &priv->timing);
- if (err) {
- dev_err(dev, "failed to get display timing\n");
- return err;
- }
-
- node = dev_read_subnode(dev, "panel-info");
- if (!ofnode_valid(node)) {
- dev_err(dev, "missing 'panel-info' node\n");
- return -ENXIO;
- }
-
- err |= ofnode_read_u32(node, "ac-bias", &priv->info.ac_bias);
- err |= ofnode_read_u32(node, "ac-bias-intrpt",
- &priv->info.ac_bias_intrpt);
- err |= ofnode_read_u32(node, "dma-burst-sz", &priv->info.dma_burst_sz);
- err |= ofnode_read_u32(node, "bpp", &priv->info.bpp);
- err |= ofnode_read_u32(node, "fdd", &priv->info.fdd);
- err |= ofnode_read_u32(node, "sync-edge", &priv->info.sync_edge);
- err |= ofnode_read_u32(node, "sync-ctrl", &priv->info.sync_ctrl);
- err |= ofnode_read_u32(node, "raster-order", &priv->info.raster_order);
- err |= ofnode_read_u32(node, "fifo-th", &priv->info.fifo_th);
- if (err) {
- dev_err(dev, "failed to get panel info\n");
- return err;
- }
-
- /* optional */
- priv->info.tft_alt_mode = ofnode_read_bool(node, "tft-alt-mode");
- priv->info.invert_pxl_clk = ofnode_read_bool(node, "invert-pxl-clk");
-
- dev_dbg(dev, "LCD: %dx%d, bpp=%d, clk=%d Hz\n",
- priv->timing.hactive.typ, priv->timing.vactive.typ,
- priv->info.bpp, priv->timing.pixelclock.typ);
- dev_dbg(dev, " hbp=%d, hfp=%d, hsw=%d\n",
- priv->timing.hback_porch.typ, priv->timing.hfront_porch.typ,
- priv->timing.hsync_len.typ);
- dev_dbg(dev, " vbp=%d, vfp=%d, vsw=%d\n",
- priv->timing.vback_porch.typ, priv->timing.vfront_porch.typ,
- priv->timing.vsync_len.typ);
-
- return 0;
-}
-
-static const struct panel_ops tilcdc_panel_ops = {
- .enable_backlight = tilcdc_panel_enable_backlight,
- .set_backlight = tilcdc_panel_set_backlight,
- .get_display_timing = tilcdc_panel_get_display_timing,
-};
-
-static const struct udevice_id tilcdc_panel_ids[] = {
- {.compatible = "ti,tilcdc,panel"},
- {}
-};
-
-U_BOOT_DRIVER(tilcdc_panel) = {
- .name = "tilcdc_panel",
- .id = UCLASS_PANEL,
- .of_match = tilcdc_panel_ids,
- .ops = &tilcdc_panel_ops,
- .of_to_plat = tilcdc_panel_of_to_plat,
- .probe = tilcdc_panel_probe,
- .remove = tilcdc_panel_remove,
- .priv_auto = sizeof(struct tilcdc_panel_priv),
-};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
- */
-
-#ifndef _TILCDC_PANEL_H
-#define _TILCDC_PANEL_H
-
-#include "tilcdc.h"
-
-int tilcdc_panel_get_display_info(struct udevice *dev,
- struct tilcdc_panel_info *info);
-
-#endif /* _TILCDC_PANEL_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
- */
-
-#include <common.h>
-#include <clk.h>
-#include <dm.h>
-#include <dm/device_compat.h>
-#include <lcd.h>
-#include <log.h>
-#include <panel.h>
-#include <video.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/utils.h>
-#include "tilcdc.h"
-#include "tilcdc-panel.h"
-
-#define LCDC_FMAX 200000000
-
-/* LCD Control Register */
-#define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8)
-#define LCDC_CTRL_RASTER_MODE BIT(0)
-#define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8)
-/* LCD Clock Enable Register */
-#define LCDC_CLKC_ENABLE_CORECLKEN BIT(0)
-#define LCDC_CLKC_ENABLE_LIDDCLKEN BIT(1)
-#define LCDC_CLKC_ENABLE_DMACLKEN BIT(2)
-/* LCD DMA Control Register */
-#define LCDC_DMA_CTRL_BURST_SIZE(x) (((x) & GENMASK(2, 0)) << 4)
-#define LCDC_DMA_CTRL_BURST_1 0x0
-#define LCDC_DMA_CTRL_BURST_2 0x1
-#define LCDC_DMA_CTRL_BURST_4 0x2
-#define LCDC_DMA_CTRL_BURST_8 0x3
-#define LCDC_DMA_CTRL_BURST_16 0x4
-#define LCDC_DMA_CTRL_FIFO_TH(x) (((x) & GENMASK(2, 0)) << 8)
-/* LCD Timing_0 Register */
-#define LCDC_RASTER_TIMING_0_HORMSB(x) ((((x) - 1) & BIT(10)) >> 7)
-#define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4)
-#define LCDC_RASTER_TIMING_0_HSWLSB(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
-#define LCDC_RASTER_TIMING_0_HFPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 16)
-#define LCDC_RASTER_TIMING_0_HBPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 24)
-/* LCD Timing_1 Register */
-#define LCDC_RASTER_TIMING_1_VERLSB(x) (((x) - 1) & GENMASK(9, 0))
-#define LCDC_RASTER_TIMING_1_VSW(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
-#define LCDC_RASTER_TIMING_1_VFP(x) (((x) & GENMASK(7, 0)) << 16)
-#define LCDC_RASTER_TIMING_1_VBP(x) (((x) & GENMASK(7, 0)) << 24)
-/* LCD Timing_2 Register */
-#define LCDC_RASTER_TIMING_2_HFPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 8)
-#define LCDC_RASTER_TIMING_2_HBPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 4)
-#define LCDC_RASTER_TIMING_2_ACB(x) (((x) & GENMASK(7, 0)) << 8)
-#define LCDC_RASTER_TIMING_2_ACBI(x) (((x) & GENMASK(3, 0)) << 16)
-#define LCDC_RASTER_TIMING_2_VSYNC_INVERT BIT(20)
-#define LCDC_RASTER_TIMING_2_HSYNC_INVERT BIT(21)
-#define LCDC_RASTER_TIMING_2_PXCLK_INVERT BIT(22)
-#define LCDC_RASTER_TIMING_2_DE_INVERT BIT(23)
-#define LCDC_RASTER_TIMING_2_HSVS_RISEFALL BIT(24)
-#define LCDC_RASTER_TIMING_2_HSVS_CONTROL BIT(25)
-#define LCDC_RASTER_TIMING_2_VERMSB(x) ((((x) - 1) & BIT(10)) << 16)
-#define LCDC_RASTER_TIMING_2_HSWMSB(x) ((((x) - 1) & GENMASK(9, 6)) << 21)
-/* LCD Raster Ctrl Register */
-#define LCDC_RASTER_CTRL_ENABLE BIT(0)
-#define LCDC_RASTER_CTRL_TFT_MODE BIT(7)
-#define LCDC_RASTER_CTRL_DATA_ORDER BIT(8)
-#define LCDC_RASTER_CTRL_REQDLY(x) (((x) & GENMASK(7, 0)) << 12)
-#define LCDC_RASTER_CTRL_PALMODE_RAWDATA (0x02 << 20)
-#define LCDC_RASTER_CTRL_TFT_ALT_ENABLE BIT(23)
-#define LCDC_RASTER_CTRL_TFT_24BPP_MODE BIT(25)
-#define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK BIT(26)
-
-enum {
- LCDC_MAX_WIDTH = 2048,
- LCDC_MAX_HEIGHT = 2048,
- LCDC_MAX_LOG2_BPP = VIDEO_BPP32,
-};
-
-struct tilcdc_regs {
- u32 pid;
- u32 ctrl;
- u32 gap0;
- u32 lidd_ctrl;
- u32 lidd_cs0_conf;
- u32 lidd_cs0_addr;
- u32 lidd_cs0_data;
- u32 lidd_cs1_conf;
- u32 lidd_cs1_addr;
- u32 lidd_cs1_data;
- u32 raster_ctrl;
- u32 raster_timing0;
- u32 raster_timing1;
- u32 raster_timing2;
- u32 raster_subpanel;
- u32 raster_subpanel2;
- u32 lcddma_ctrl;
- u32 lcddma_fb0_base;
- u32 lcddma_fb0_ceiling;
- u32 lcddma_fb1_base;
- u32 lcddma_fb1_ceiling;
- u32 sysconfig;
- u32 irqstatus_raw;
- u32 irqstatus;
- u32 irqenable_set;
- u32 irqenable_clear;
- u32 gap1;
- u32 clkc_enable;
- u32 clkc_reset;
-};
-
-struct tilcdc_priv {
- struct tilcdc_regs *regs;
- struct clk gclk;
- struct clk dpll_m2_clk;
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static ulong tilcdc_set_pixel_clk_rate(struct udevice *dev, ulong rate)
-{
- struct tilcdc_priv *priv = dev_get_priv(dev);
- struct tilcdc_regs *regs = priv->regs;
- ulong mult_rate, mult_round_rate, best_err, err;
- u32 v;
- int div, i;
-
- best_err = rate;
- div = 0;
- for (i = 2; i <= 255; i++) {
- mult_rate = rate * i;
- mult_round_rate = clk_round_rate(&priv->gclk, mult_rate);
- if (IS_ERR_VALUE(mult_round_rate))
- return mult_round_rate;
-
- err = mult_rate - mult_round_rate;
- if (err < best_err) {
- best_err = err;
- div = i;
- if (err == 0)
- break;
- }
- }
-
- if (div == 0) {
- dev_err(dev, "failed to find a divisor\n");
- return -EFAULT;
- }
-
- mult_rate = clk_set_rate(&priv->gclk, rate * div);
- v = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
- v |= LCDC_CTRL_CLK_DIVISOR(div);
- writel(v, ®s->ctrl);
- rate = mult_rate / div;
- dev_dbg(dev, "rate=%ld, div=%d, err=%ld\n", rate, div, err);
- return rate;
-}
-
-static int tilcdc_remove(struct udevice *dev)
-{
- struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
- struct tilcdc_priv *priv = dev_get_priv(dev);
-
- uc_plat->base -= 0x20;
- uc_plat->size += 0x20;
- clk_release_all(&priv->gclk, 1);
- clk_release_all(&priv->dpll_m2_clk, 1);
- return 0;
-}
-
-static int tilcdc_probe(struct udevice *dev)
-{
- struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
- struct video_priv *uc_priv = dev_get_uclass_priv(dev);
- struct tilcdc_priv *priv = dev_get_priv(dev);
- struct tilcdc_regs *regs = priv->regs;
- struct udevice *panel, *clk_dev;
- struct tilcdc_panel_info info;
- struct display_timing timing;
- ulong rate;
- u32 reg;
- int err;
-
- /* Before relocation we don't need to do anything */
- if (!(gd->flags & GD_FLG_RELOC))
- return 0;
-
- err = uclass_get_device(UCLASS_PANEL, 0, &panel);
- if (err) {
- dev_err(dev, "failed to get panel\n");
- return err;
- }
-
- err = panel_get_display_timing(panel, &timing);
- if (err) {
- dev_err(dev, "failed to get display timing\n");
- return err;
- }
-
- if (timing.pixelclock.typ > (LCDC_FMAX / 2)) {
- dev_err(dev, "invalid display clock-frequency: %d Hz\n",
- timing.pixelclock.typ);
- return -EINVAL;
- }
-
- if (timing.hactive.typ > LCDC_MAX_WIDTH)
- timing.hactive.typ = LCDC_MAX_WIDTH;
-
- if (timing.vactive.typ > LCDC_MAX_HEIGHT)
- timing.vactive.typ = LCDC_MAX_HEIGHT;
-
- err = tilcdc_panel_get_display_info(panel, &info);
- if (err) {
- dev_err(dev, "failed to get panel info\n");
- return err;
- }
-
- switch (info.bpp) {
- case 16:
- case 24:
- case 32:
- break;
- default:
- dev_err(dev, "invalid seting, bpp: %d\n", info.bpp);
- return -EINVAL;
- }
-
- switch (info.dma_burst_sz) {
- case 1:
- case 2:
- case 4:
- case 8:
- case 16:
- break;
- default:
- dev_err(dev, "invalid setting, dma-burst-sz: %d\n",
- info.dma_burst_sz);
- return -EINVAL;
- }
-
- err = uclass_get_device_by_name(UCLASS_CLK, "lcd_gclk@534", &clk_dev);
- if (err) {
- dev_err(dev, "failed to get lcd_gclk device\n");
- return err;
- }
-
- err = clk_request(clk_dev, &priv->gclk);
- if (err) {
- dev_err(dev, "failed to get %s clock\n", clk_dev->name);
- return err;
- }
-
- rate = tilcdc_set_pixel_clk_rate(dev, timing.pixelclock.typ);
- if (IS_ERR_VALUE(rate)) {
- dev_err(dev, "failed to set pixel clock rate\n");
- return rate;
- }
-
- err = uclass_get_device_by_name(UCLASS_CLK, "dpll_disp_m2_ck@4a4",
- &clk_dev);
- if (err) {
- dev_err(dev, "failed to get dpll_disp_m2 clock device\n");
- return err;
- }
-
- err = clk_request(clk_dev, &priv->dpll_m2_clk);
- if (err) {
- dev_err(dev, "failed to get %s clock\n", clk_dev->name);
- return err;
- }
-
- err = clk_set_parent(&priv->gclk, &priv->dpll_m2_clk);
- if (err) {
- dev_err(dev, "failed to set %s clock as %s's parent\n",
- priv->dpll_m2_clk.dev->name, priv->gclk.dev->name);
- return err;
- }
-
- /* palette default entry */
- memset((void *)uc_plat->base, 0, 0x20);
- *(unsigned int *)uc_plat->base = 0x4000;
- /* point fb behind palette */
- uc_plat->base += 0x20;
- uc_plat->size -= 0x20;
-
- writel(LCDC_CLKC_ENABLE_CORECLKEN | LCDC_CLKC_ENABLE_LIDDCLKEN |
- LCDC_CLKC_ENABLE_DMACLKEN, ®s->clkc_enable);
- writel(0, ®s->raster_ctrl);
-
- reg = readl(®s->ctrl) & LCDC_CTRL_CLK_DIVISOR_MASK;
- reg |= LCDC_CTRL_RASTER_MODE;
- writel(reg, ®s->ctrl);
-
- reg = (timing.hactive.typ * timing.vactive.typ * info.bpp) >> 3;
- reg += uc_plat->base;
- writel(uc_plat->base, ®s->lcddma_fb0_base);
- writel(reg, ®s->lcddma_fb0_ceiling);
- writel(uc_plat->base, ®s->lcddma_fb1_base);
- writel(reg, ®s->lcddma_fb1_ceiling);
-
- reg = LCDC_DMA_CTRL_FIFO_TH(info.fifo_th);
- switch (info.dma_burst_sz) {
- case 1:
- reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_1);
- break;
- case 2:
- reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_2);
- break;
- case 4:
- reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_4);
- break;
- case 8:
- reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_8);
- break;
- case 16:
- reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16);
- break;
- }
-
- writel(reg, ®s->lcddma_ctrl);
-
- writel(LCDC_RASTER_TIMING_0_HORLSB(timing.hactive.typ) |
- LCDC_RASTER_TIMING_0_HORMSB(timing.hactive.typ) |
- LCDC_RASTER_TIMING_0_HFPLSB(timing.hfront_porch.typ) |
- LCDC_RASTER_TIMING_0_HBPLSB(timing.hback_porch.typ) |
- LCDC_RASTER_TIMING_0_HSWLSB(timing.hsync_len.typ),
- ®s->raster_timing0);
-
- writel(LCDC_RASTER_TIMING_1_VBP(timing.vback_porch.typ) |
- LCDC_RASTER_TIMING_1_VFP(timing.vfront_porch.typ) |
- LCDC_RASTER_TIMING_1_VSW(timing.vsync_len.typ) |
- LCDC_RASTER_TIMING_1_VERLSB(timing.vactive.typ),
- ®s->raster_timing1);
-
- reg = LCDC_RASTER_TIMING_2_ACB(info.ac_bias) |
- LCDC_RASTER_TIMING_2_ACBI(info.ac_bias_intrpt) |
- LCDC_RASTER_TIMING_2_HSWMSB(timing.hsync_len.typ) |
- LCDC_RASTER_TIMING_2_VERMSB(timing.vactive.typ) |
- LCDC_RASTER_TIMING_2_HBPMSB(timing.hback_porch.typ) |
- LCDC_RASTER_TIMING_2_HFPMSB(timing.hfront_porch.typ);
-
- if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
- reg |= LCDC_RASTER_TIMING_2_VSYNC_INVERT;
-
- if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
- reg |= LCDC_RASTER_TIMING_2_HSYNC_INVERT;
-
- if (info.invert_pxl_clk)
- reg |= LCDC_RASTER_TIMING_2_PXCLK_INVERT;
-
- if (info.sync_edge)
- reg |= LCDC_RASTER_TIMING_2_HSVS_RISEFALL;
-
- if (info.sync_ctrl)
- reg |= LCDC_RASTER_TIMING_2_HSVS_CONTROL;
-
- writel(reg, ®s->raster_timing2);
-
- reg = LCDC_RASTER_CTRL_PALMODE_RAWDATA | LCDC_RASTER_CTRL_TFT_MODE |
- LCDC_RASTER_CTRL_ENABLE | LCDC_RASTER_CTRL_REQDLY(info.fdd);
-
- if (info.tft_alt_mode)
- reg |= LCDC_RASTER_CTRL_TFT_ALT_ENABLE;
-
- if (info.bpp == 24)
- reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE;
- else if (info.bpp == 32)
- reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE |
- LCDC_RASTER_CTRL_TFT_24BPP_UNPACK;
-
- if (info.raster_order)
- reg |= LCDC_RASTER_CTRL_DATA_ORDER;
-
- writel(reg, ®s->raster_ctrl);
-
- uc_priv->xsize = timing.hactive.typ;
- uc_priv->ysize = timing.vactive.typ;
- uc_priv->bpix = log_2_n_round_up(info.bpp);
-
- err = panel_enable_backlight(panel);
- if (err) {
- dev_err(dev, "failed to enable panel backlight\n");
- return err;
- }
-
- return 0;
-}
-
-static int tilcdc_of_to_plat(struct udevice *dev)
-{
- struct tilcdc_priv *priv = dev_get_priv(dev);
-
- priv->regs = (struct tilcdc_regs *)dev_read_addr(dev);
- if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
- dev_err(dev, "failed to get base address\n");
- return -EINVAL;
- }
-
- dev_dbg(dev, "LCD: base address=0x%x\n", (unsigned int)priv->regs);
- return 0;
-}
-
-static int tilcdc_bind(struct udevice *dev)
-{
- struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
-
- uc_plat->size = ((LCDC_MAX_WIDTH * LCDC_MAX_HEIGHT *
- (1 << LCDC_MAX_LOG2_BPP)) >> 3) + 0x20;
-
- dev_dbg(dev, "frame buffer size 0x%x\n", uc_plat->size);
- return 0;
-}
-
-static const struct udevice_id tilcdc_ids[] = {
- {.compatible = "ti,am33xx-tilcdc"},
- {}
-};
-
-U_BOOT_DRIVER(tilcdc) = {
- .name = "tilcdc",
- .id = UCLASS_VIDEO,
- .of_match = tilcdc_ids,
- .bind = tilcdc_bind,
- .of_to_plat = tilcdc_of_to_plat,
- .probe = tilcdc_probe,
- .remove = tilcdc_remove,
- .priv_auto = sizeof(struct tilcdc_priv)
-};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
- */
-
-#ifndef _TILCDC_H
-#define _TILCDC_H
-
-/**
- * tilcdc_panel_info: Panel parameters
- *
- * @ac_bias: AC Bias Pin Frequency
- * @ac_bias_intrpt: AC Bias Pin Transitions per Interrupt
- * @dma_burst_sz: DMA burst size
- * @bpp: Bits per pixel
- * @fdd: FIFO DMA Request Delay
- * @tft_alt_mode: TFT Alternative Signal Mapping (Only for active)
- * @invert_pxl_clk: Invert pixel clock
- * @sync_edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
- * @sync_ctrl: Horizontal and Vertical Sync: Control: 0=ignore
- * @raster_order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
- * @fifo_th: DMA FIFO threshold
- */
-struct tilcdc_panel_info {
- u32 ac_bias;
- u32 ac_bias_intrpt;
- u32 dma_burst_sz;
- u32 bpp;
- u32 fdd;
- bool tft_alt_mode;
- bool invert_pxl_clk;
- u32 sync_edge;
- u32 sync_ctrl;
- u32 raster_order;
- u32 fifo_th;
-};
-
-#endif /* _TILCDC_H */
projects / uboot.git / commitdiff