net/mlx5e: Take DCBNL-related definitions into dedicated files

Take DCBNL-related definitions out of the common en.h header,
Use a dedicated header file for exposing them.
Some need not to be exposed, use them locally in the .c file.
Use stubs to eliminate use of CONFIG_MLX5_CORE_EN_DCB in the
generic control flows.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index ac385ac93fe5c168239304f3d085dad3d47ebca7..81fd53569463fc25dcdea83e28ad984621523add 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -52,6 +52,7 @@
 #include "wq.h"
 #include "mlx5_core.h"
 #include "en_stats.h"
+#include "en/dcbnl.h"
 #include "en/fs.h"
 #include "lib/hv_vhca.h"
 
@@ -68,8 +69,6 @@ struct page_pool;
 #define MLX5E_HW2SW_MTU(params, hwmtu) ((hwmtu) - ((params)->hard_mtu))
 #define MLX5E_SW2HW_MTU(params, swmtu) ((swmtu) + ((params)->hard_mtu))
 
-#define MLX5E_MAX_PRIORITY      8
-#define MLX5E_MAX_DSCP          64
 #define MLX5E_MAX_NUM_TC       8
 
 #define MLX5_RX_HEADROOM NET_SKB_PAD
@@ -242,10 +241,6 @@ enum mlx5e_priv_flag {
 
 #define MLX5E_GET_PFLAG(params, pflag) (!!((params)->pflags & (BIT(pflag))))
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
-#define MLX5E_MAX_BW_ALLOC 100 /* Max percentage of BW allocation */
-#endif
-
 struct mlx5e_params {
        u8  log_sq_size;
        u8  rq_wq_type;
@@ -270,42 +265,6 @@ struct mlx5e_params {
        int hard_mtu;
 };
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
-struct mlx5e_cee_config {
-       /* bw pct for priority group */
-       u8                         pg_bw_pct[CEE_DCBX_MAX_PGS];
-       u8                         prio_to_pg_map[CEE_DCBX_MAX_PRIO];
-       bool                       pfc_setting[CEE_DCBX_MAX_PRIO];
-       bool                       pfc_enable;
-};
-
-enum {
-       MLX5_DCB_CHG_RESET,
-       MLX5_DCB_NO_CHG,
-       MLX5_DCB_CHG_NO_RESET,
-};
-
-struct mlx5e_dcbx {
-       enum mlx5_dcbx_oper_mode   mode;
-       struct mlx5e_cee_config    cee_cfg; /* pending configuration */
-       u8                         dscp_app_cnt;
-
-       /* The only setting that cannot be read from FW */
-       u8                         tc_tsa[IEEE_8021QAZ_MAX_TCS];
-       u8                         cap;
-
-       /* Buffer configuration */
-       bool                       manual_buffer;
-       u32                        cable_len;
-       u32                        xoff;
-};
-
-struct mlx5e_dcbx_dp {
-       u8                         dscp2prio[MLX5E_MAX_DSCP];
-       u8                         trust_state;
-};
-#endif
-
 enum {
        MLX5E_RQ_STATE_ENABLED,
        MLX5E_RQ_STATE_RECOVERING,
@@ -1068,13 +1027,6 @@ static inline bool mlx5_tx_swp_supported(struct mlx5_core_dev *mdev)
 }
 
 extern const struct ethtool_ops mlx5e_ethtool_ops;
-#ifdef CONFIG_MLX5_CORE_EN_DCB
-extern const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops;
-int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets);
-void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv);
-void mlx5e_dcbnl_init_app(struct mlx5e_priv *priv);
-void mlx5e_dcbnl_delete_app(struct mlx5e_priv *priv);
-#endif
 
 int mlx5e_create_tir(struct mlx5_core_dev *mdev, struct mlx5e_tir *tir,
                     u32 *in);

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/dcbnl.h b/drivers/net/ethernet/mellanox/mlx5/core/en/dcbnl.h
new file mode 100644 (file)
index 0000000..7be6b2d
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/dcbnl.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/* Copyright (c) 2020 Mellanox Technologies. */
+
+#ifndef __MLX5E_DCBNL_H__
+#define __MLX5E_DCBNL_H__
+
+#ifdef CONFIG_MLX5_CORE_EN_DCB
+
+#define MLX5E_MAX_PRIORITY (8)
+
+struct mlx5e_cee_config {
+       /* bw pct for priority group */
+       u8                         pg_bw_pct[CEE_DCBX_MAX_PGS];
+       u8                         prio_to_pg_map[CEE_DCBX_MAX_PRIO];
+       bool                       pfc_setting[CEE_DCBX_MAX_PRIO];
+       bool                       pfc_enable;
+};
+
+struct mlx5e_dcbx {
+       enum mlx5_dcbx_oper_mode   mode;
+       struct mlx5e_cee_config    cee_cfg; /* pending configuration */
+       u8                         dscp_app_cnt;
+
+       /* The only setting that cannot be read from FW */
+       u8                         tc_tsa[IEEE_8021QAZ_MAX_TCS];
+       u8                         cap;
+
+       /* Buffer configuration */
+       bool                       manual_buffer;
+       u32                        cable_len;
+       u32                        xoff;
+};
+
+#define MLX5E_MAX_DSCP (64)
+
+struct mlx5e_dcbx_dp {
+       u8                         dscp2prio[MLX5E_MAX_DSCP];
+       u8                         trust_state;
+};
+
+void mlx5e_dcbnl_build_netdev(struct net_device *netdev);
+void mlx5e_dcbnl_build_rep_netdev(struct net_device *netdev);
+void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv);
+void mlx5e_dcbnl_init_app(struct mlx5e_priv *priv);
+void mlx5e_dcbnl_delete_app(struct mlx5e_priv *priv);
+#else
+static inline void mlx5e_dcbnl_build_netdev(struct net_device *netdev) {}
+static inline void mlx5e_dcbnl_build_rep_netdev(struct net_device *netdev) {}
+static inline void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv) {}
+static inline void mlx5e_dcbnl_init_app(struct mlx5e_priv *priv) {}
+static inline void mlx5e_dcbnl_delete_app(struct mlx5e_priv *priv) {}
+#endif
+
+#endif /* __MLX5E_DCBNL_H__ */

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 47874d34156b1a9e78ab38ed30295ead639142eb..ec7b332d74c273671a7f89037621c79daf95c6a7 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -35,6 +35,8 @@
 #include "en/port.h"
 #include "en/port_buffer.h"
 
+#define MLX5E_MAX_BW_ALLOC 100 /* Max percentage of BW allocation */
+
 #define MLX5E_100MB (100000)
 #define MLX5E_1GB   (1000000)
 
@@ -49,6 +51,12 @@ enum {
        MLX5E_LOWEST_PRIO_GROUP   = 0,
 };
 
+enum {
+       MLX5_DCB_CHG_RESET,
+       MLX5_DCB_NO_CHG,
+       MLX5_DCB_CHG_NO_RESET,
+};
+
 #define MLX5_DSCP_SUPPORTED(mdev) (MLX5_CAP_GEN(mdev, qcam_reg)  && \
                                   MLX5_CAP_QCAM_REG(mdev, qpts) && \
                                   MLX5_CAP_QCAM_REG(mdev, qpdpm))
@@ -238,7 +246,7 @@ static void mlx5e_build_tc_tx_bw(struct ieee_ets *ets, u8 *tc_tx_bw,
  *   Report both group #0 and #1 as ETS type.
  *     All the tcs in group #0 will be reported with 0% BW.
  */
-int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets)
+static int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets)
 {
        struct mlx5_core_dev *mdev = priv->mdev;
        u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
@@ -1009,6 +1017,24 @@ const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops = {
        .setpfcstate    = mlx5e_dcbnl_setpfcstate,
 };
 
+void mlx5e_dcbnl_build_netdev(struct net_device *netdev)
+{
+       struct mlx5e_priv *priv = netdev_priv(netdev);
+       struct mlx5_core_dev *mdev = priv->mdev;
+
+       if (MLX5_CAP_GEN(mdev, vport_group_manager) && MLX5_CAP_GEN(mdev, qos))
+               netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
+}
+
+void mlx5e_dcbnl_build_rep_netdev(struct net_device *netdev)
+{
+       struct mlx5e_priv *priv = netdev_priv(netdev);
+       struct mlx5_core_dev *mdev = priv->mdev;
+
+       if (MLX5_CAP_GEN(mdev, qos))
+               netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
+}
+
 static void mlx5e_dcbnl_query_dcbx_mode(struct mlx5e_priv *priv,
                                        enum mlx5_dcbx_oper_mode *mode)
 {

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 75f178a438225c6a23de216f14816ac88d266d8c..07823abe555755dca69c18d54be103439b5cacc3 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -66,7 +66,6 @@
 #include "en/devlink.h"
 #include "lib/mlx5.h"
 
-
 bool mlx5e_check_fragmented_striding_rq_cap(struct mlx5_core_dev *mdev)
 {
        bool striding_rq_umr = MLX5_CAP_GEN(mdev, striding_rq) &&
@@ -4927,10 +4926,7 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 
        netdev->netdev_ops = &mlx5e_netdev_ops;
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
-       if (MLX5_CAP_GEN(mdev, vport_group_manager) && MLX5_CAP_GEN(mdev, qos))
-               netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
-#endif
+       mlx5e_dcbnl_build_netdev(netdev);
 
        netdev->watchdog_timeo    = 15 * HZ;
 
@@ -5218,9 +5214,7 @@ static int mlx5e_init_nic_tx(struct mlx5e_priv *priv)
                return err;
        }
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        mlx5e_dcbnl_initialize(priv);
-#endif
        return 0;
 }
 
@@ -5247,9 +5241,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv)
        mlx5e_hv_vhca_stats_create(priv);
        if (netdev->reg_state != NETREG_REGISTERED)
                return;
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        mlx5e_dcbnl_init_app(priv);
-#endif
 
        queue_work(priv->wq, &priv->set_rx_mode_work);
 
@@ -5264,10 +5256,8 @@ static void mlx5e_nic_disable(struct mlx5e_priv *priv)
 {
        struct mlx5_core_dev *mdev = priv->mdev;
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        if (priv->netdev->reg_state == NETREG_REGISTERED)
                mlx5e_dcbnl_delete_app(priv);
-#endif
 
        rtnl_lock();
        if (netif_running(priv->netdev))
@@ -5564,9 +5554,7 @@ static void *mlx5e_add(struct mlx5_core_dev *mdev)
 
        mlx5e_devlink_port_type_eth_set(priv);
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        mlx5e_dcbnl_init_app(priv);
-#endif
        return priv;
 
 err_devlink_port_unregister:
@@ -5589,9 +5577,7 @@ static void mlx5e_remove(struct mlx5_core_dev *mdev, void *vpriv)
        }
 #endif
        priv = vpriv;
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        mlx5e_dcbnl_delete_app(priv);
-#endif
        unregister_netdev(priv->netdev);
        mlx5e_devlink_port_unregister(priv);
        mlx5e_detach(mdev, vpriv);

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index 1eac7a53d56fce03c607d007a7714490b3acc58e..52351c1056277e801c9b38f5571f1251b35cf30a 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -1544,10 +1544,7 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev)
                /* we want a persistent mac for the uplink rep */
                mlx5_query_mac_address(mdev, netdev->dev_addr);
                netdev->ethtool_ops = &mlx5e_uplink_rep_ethtool_ops;
-#ifdef CONFIG_MLX5_CORE_EN_DCB
-               if (MLX5_CAP_GEN(mdev, qos))
-                       netdev->dcbnl_ops = &mlx5e_dcbnl_ops;
-#endif
+               mlx5e_dcbnl_build_rep_netdev(netdev);
        } else {
                netdev->netdev_ops = &mlx5e_netdev_ops_rep;
                eth_hw_addr_random(netdev);
@@ -1929,10 +1926,8 @@ static void mlx5e_uplink_rep_enable(struct mlx5e_priv *priv)
        mlx5_lag_add(mdev, netdev);
        priv->events_nb.notifier_call = uplink_rep_async_event;
        mlx5_notifier_register(mdev, &priv->events_nb);
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        mlx5e_dcbnl_initialize(priv);
        mlx5e_dcbnl_init_app(priv);
-#endif
 }
 
 static void mlx5e_uplink_rep_disable(struct mlx5e_priv *priv)
@@ -1940,9 +1935,7 @@ static void mlx5e_uplink_rep_disable(struct mlx5e_priv *priv)
        struct mlx5_core_dev *mdev = priv->mdev;
        struct mlx5e_rep_priv *rpriv = priv->ppriv;
 
-#ifdef CONFIG_MLX5_CORE_EN_DCB
        mlx5e_dcbnl_delete_app(priv);
-#endif
        mlx5_notifier_unregister(mdev, &priv->events_nb);
        cancel_work_sync(&rpriv->uplink_priv.reoffload_flows_work);
        mlx5_lag_remove(mdev);