]> git.baikalelectronics.ru Git - uboot.git/commitdiff
arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() function
authorStefan Roese <sr@denx.de>
Thu, 18 Nov 2021 08:19:37 +0000 (09:19 +0100)
committerStefan Roese <sr@denx.de>
Sun, 19 Dec 2021 08:50:47 +0000 (09:50 +0100)
This function is not referenced in mainline U-Boot. Let's remove now.

Signed-off-by: Stefan Roese <sr@denx.de>
drivers/ddr/marvell/axp/ddr3_hw_training.h
drivers/ddr/marvell/axp/ddr3_init.c
drivers/ddr/marvell/axp/ddr3_init.h

index 30daaa9831b9402d3aaea242d297628a95f3267f..fcdef792c76a6b6e42242e2019dcf290d8e34035 100644 (file)
@@ -373,7 +373,6 @@ int ddr3_load_dqs_patterns(MV_DRAM_INFO *dram_info);
 
 void ddr3_static_training_init(void);
 
-u8 ddr3_get_eprom_fabric(void);
 void ddr3_set_performance_params(MV_DRAM_INFO *dram_info);
 int ddr3_dram_sram_burst(u32 src, u32 dst, u32 len);
 void ddr3_save_training(MV_DRAM_INFO *dram_info);
index 607f3e12c3aece61f2339c32bc27caa78dd9caa3..c5aa1ac18f5186fce29b4ce01f8f927ebd279ef7 100644 (file)
@@ -943,30 +943,6 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type)
        return 0;
 }
 
-#if defined(DB_88F78X60_REV2)
-/*
- * Name:     ddr3_get_eprom_fabric - Get Fabric configuration from EPROM
- * Desc:
- * Args:     twsi Address
- * Notes:    Only Available for ArmadaXP DB Rev2 boards
- * Returns:  None.
- */
-u8 ddr3_get_eprom_fabric(void)
-{
-#ifdef AUTO_DETECTION_SUPPORT
-       u8 data = 0;
-       int ret;
-
-       ret = i2c_read(NEW_FABRIC_TWSI_ADDR, 1, 1, (u8 *)&data, 1);
-       if (!ret)
-               return data & 0x1F;
-#endif
-
-       return 0;
-}
-
-#endif
-
 /*
  * Name:     ddr3_cl_to_valid_cl - this return register matching CL value
  * Desc:
index 569a14b7184f7097fc068a3ad1fe786be3807b0e..9a21886ac3e7dd5097b5cf407c7774034b3d85db 100644 (file)
@@ -98,7 +98,6 @@ int ddr3_hw_training(u32 target_freq, u32 ddr_width,
 
 void ddr3_print_version(void);
 void fix_pll_val(u8 target_fab);
-u8 ddr3_get_eprom_fabric(void);
 u32 ddr3_get_fab_opt(void);
 u32 ddr3_get_cpu_freq(void);
 u32 ddr3_get_vco_freq(void);