net: dsa: felix: manage host flooding using a specific driver callback

net: dsa: felix: manage host flooding using a specific driver callback

At the time - commit 203a1df488cf ("net: dsa: manage flooding on the CPU
ports") - not introducing a dedicated switch callback for host flooding
made sense, because for the only user, the felix driver, there was
nothing different to do for the CPU port than set the flood flags on the
CPU port just like on any other bridge port.

There are 2 reasons why this approach is not good enough, however.

(1) Other drivers, like sja1105, support configuring flooding as a
    function of {ingress port, egress port}, whereas the DSA
    ->port_bridge_flags() function only operates on an egress port.
    So with that driver we'd have useless host flooding from user ports
    which don't need it.

(2) Even with the felix driver, support for multiple CPU ports makes it
    difficult to piggyback on ->port_bridge_flags(). The way in which
    the felix driver is going to support host-filtered addresses with
    multiple CPU ports is that it will direct these addresses towards
    both CPU ports (in a sort of multicast fashion), then restrict the
    forwarding to only one of the two using the forwarding masks.
    Consequently, flooding will also be enabled towards both CPU ports.
    However, ->port_bridge_flags() gets passed the index of a single CPU
    port, and that leaves the flood settings out of sync between the 2
    CPU ports.

This is to say, it's better to have a specific driver method for host
flooding, which takes the user port as argument. This solves problem (1)
by allowing the driver to do different things for different user ports,
and problem (2) by abstracting the operation and letting the driver do
whatever, rather than explicitly making the DSA core point to the CPU
port it thinks needs to be touched.

This new method also creates a problem, which is that cross-chip setups
are not handled. However I don't have hardware right now where I can
test what is the proper thing to do, and there isn't hardware compatible
with multi-switch trees that supports host flooding. So it remains a
problem to be tackled in the future.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>