]> git.baikalelectronics.ru Git - kernel.git/commit
mmc: core: Check SWITCH_ERROR bit from each CMD13 response when polling
authorUlf Hansson <ulf.hansson@linaro.org>
Mon, 21 Nov 2016 14:49:48 +0000 (15:49 +0100)
committerUlf Hansson <ulf.hansson@linaro.org>
Tue, 29 Nov 2016 08:05:24 +0000 (09:05 +0100)
commit017e7891e2513a8101846a3a526f66bb283347ef
tree31c5194aa219d6ae645275bf8bdffd6ed6ba5ac1
parentd7c108eb6109e9ac550168942810dce07ebfe2a5
mmc: core: Check SWITCH_ERROR bit from each CMD13 response when polling

According to the JEDEC specification, the SWITCH_ERROR bit in the device
status from a R1 response, is an error bit which may be cleared as soon as
the response that reports the error is sent.

When polling with CMD13 to find out when the card stops signaling busy
after a CMD6 has been sent, we currently parse only the last CMD13 response
for the SWITCH_ERROR bit. Consequentially we could loose important
information about the card.

In worst case if the card stops signaling busy within the allowed timeout,
we could end up believing that the CMD6 command completed successfully,
when in fact it didn't.

To improve the behaviour, let's parse each CMD13 response to see if the
SWITCH_ERROR bit is set in the device status. In such case, we abort the
polling loop and report the error.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
drivers/mmc/core/mmc_ops.c