From ffa1151b43565b6e988d678ca87225d2a1f8f5c1 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 14 Nov 2022 19:59:23 +0100 Subject: [PATCH] ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl We set the PIOC to GPIO mode. This way the pin becomes an input signal will be usable by the controller. Without this change the udc on the 9g20ek does not work. Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 9d6b345ecfbc ("ARM: at91: add at91sam9g20ek boards dt support") Signed-off-by: Michael Grzeschik Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de --- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 60d61291f3444..024af2db638eb 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + ; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -84,6 +91,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; -- 2.39.5