From 8503c657bc2c49cf22d78b4aa381050e1f8123a3 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 25 Jan 2019 15:26:16 -0800 Subject: [PATCH] PCI: qcom: Don't deassert reset GPIO during probe Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 326802956edb ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Stanimir Varbanov Cc: stable@vger.kernel.org --- drivers/pci/controller/dwc/pcie-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index d185ea5fe9961..a7f7035567902 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1228,7 +1228,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) pcie->ops = of_device_get_match_data(dev); - pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW); + pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); if (IS_ERR(pcie->reset)) { ret = PTR_ERR(pcie->reset); goto err_pm_runtime_put; -- 2.39.5