From 5f25f2712fd1f123f206865e950cf78aa2d1ab09 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 24 Jun 2014 17:14:40 +0300 Subject: [PATCH] xhci: Use correct SLOT ID when handling a reset device command Command completion events normally include command completion status, SLOT_ID, and a pointer to the original command. Reset device command completion SLOT_ID may be zero according to xhci specs 4.6.11. VIA controllers set the SLOT_ID to zero, triggering a WARN_ON in the command completion handler. Use the SLOT ID found from the original command instead. This patch should be applied to stable kernels since 3.13 that contain the commit 4ad37da35ea5f33db86f0f6e202bbf48d843a51c "xhci: use completion event's slot id rather than dig it out of command" Cc: stable@vger.kernel.org # 3.13 Reported-by: Saran Neti Tested-by: Saran Neti Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d67ff71209f52..71657d39a5782 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1433,8 +1433,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code); break; case TRB_RESET_DEV: - WARN_ON(slot_id != TRB_TO_SLOT_ID( - le32_to_cpu(cmd_trb->generic.field[3]))); + /* SLOT_ID field in reset device cmd completion event TRB is 0. + * Use the SLOT_ID from the command TRB instead (xhci 4.6.11) + */ + slot_id = TRB_TO_SLOT_ID( + le32_to_cpu(cmd_trb->generic.field[3])); xhci_handle_cmd_reset_dev(xhci, slot_id, event); break; case TRB_NEC_GET_FW: -- 2.39.5