From 4f4b39b3444a4350c6339ed483b2668541e8d8b2 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 16 Jun 2022 11:38:00 +0200 Subject: [PATCH] can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id The device ID register is 32 bits wide. The driver uses incorrectly the size of a pointer to a u32 to calculate the length of the SPI transfer. This results in a read of 2 registers on 64 bit platforms. This is no problem on the Linux side, as the RX buffer of the SPI transfer is large enough. In the mpc251xfd chip this results in the read of an undocumented register. So far no problems were observed. Fix the length of the SPI transfer to read the device ID register only. Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de Fixes: 74ed7c9bd838 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Rasmus Villemoes Reviewed-by: Manivannan Sadhasivam Signed-off-by: Marc Kleine-Budde --- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 34b160024ce3b..3160881e89d9e 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -1778,7 +1778,7 @@ mcp251xfd_register_get_dev_id(const struct mcp251xfd_priv *priv, u32 *dev_id, xfer[0].len = sizeof(buf_tx->cmd); xfer[0].speed_hz = priv->spi_max_speed_hz_slow; xfer[1].rx_buf = buf_rx->data; - xfer[1].len = sizeof(dev_id); + xfer[1].len = sizeof(*dev_id); xfer[1].speed_hz = priv->spi_max_speed_hz_fast; mcp251xfd_spi_cmd_read_nocrc(&buf_tx->cmd, MCP251XFD_REG_DEVID); -- 2.39.5