From 4c43489af493a559bc0e0e142ecc49f6ca17bc0d Mon Sep 17 00:00:00 2001 From: Jongsung Kim Date: Fri, 6 Dec 2019 20:40:00 +0900 Subject: [PATCH] net: stmmac: reset Tx desc base address before restarting Tx commit f421031e3ff0dd288a6e1bbde9aa41a25bb814e6 upstream. Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim Signed-off-by: David S. Miller Cc: Macpaul Lin Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 10d28be73f456..4e7cfd3bfcd2e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1987,6 +1987,8 @@ static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan) tx_q->cur_tx = 0; tx_q->mss = 0; netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan)); + stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg, + tx_q->dma_tx_phy, chan); stmmac_start_tx_dma(priv, chan); priv->dev->stats.tx_errors++; -- 2.39.5