From 2b5e452599cf359bf8bc8263803a1fa82f6267ab Mon Sep 17 00:00:00 2001
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Sun, 23 Feb 2020 22:47:12 +0200
Subject: [PATCH] arm64: dts: ls1028a: disable all enetc ports by default

There are few boards that enable all ENETC ports, so instead of having
board DTs disable them, do so in the DTSI and have the boards enable the
ports they use.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 5 +----
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 5 +++++
 3 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index ca409d907b36e..dd69c5b821e99 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -225,6 +225,7 @@
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
 	phy-connection-type = "rgmii-id";
+	status = "okay";
 };
 
 &sai1 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb55653850d6..14efe3b06042b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -180,6 +180,7 @@
 &enetc_port0 {
 	phy-handle = <&sgmii_phy0>;
 	phy-connection-type = "sgmii";
+	status = "okay";
 
 	mdio {
 		#address-cells = <1>;
@@ -190,10 +191,6 @@
 	};
 };
 
-&enetc_port1 {
-	status = "disabled";
-};
-
 &sai4 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 6e406a6a16cf4..9e7436a390fda 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -744,17 +744,22 @@
 			enetc_port0: ethernet@0,0 {
 				compatible = "fsl,enetc";
 				reg = <0x000000 0 0 0 0>;
+				status = "disabled";
 			};
+
 			enetc_port1: ethernet@0,1 {
 				compatible = "fsl,enetc";
 				reg = <0x000100 0 0 0 0>;
+				status = "disabled";
 			};
+
 			enetc_mdio_pf3: mdio@0,3 {
 				compatible = "fsl,enetc-mdio";
 				reg = <0x000300 0 0 0 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
-- 
2.39.5