From 19db4fb95dce7be698e0ed0c52a9ab81f2ab9d3e Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 19 Jul 2013 20:16:17 +0200 Subject: [PATCH] ath9k_htc: do some initial hardware configuration Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi Signed-off-by: Oleksij Rempel Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 71a183ffc77fa..c3676bf1d6c45 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -861,6 +861,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv, if (error != 0) goto err_rx; + ath9k_hw_disable(priv->ah); #ifdef CONFIG_MAC80211_LEDS /* must be initialized before ieee80211_register_hw */ priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw, -- 2.39.5