From 045967dbb67232a8a095f84e1df676c3edb11acb Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 2 May 2017 20:27:45 +0200 Subject: [PATCH] ARM: at91: ma5d4: Swap SD/MMC controller order MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which is the version available on the market. Swap the controller order to match this and future versions of the SoM. Signed-off-by: Marek Vasut Cc: Andreas Bießmann --- board/aries/ma5d4evk/ma5d4evk.c | 5 ++--- include/configs/ma5d4evk.h | 10 +++++----- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/board/aries/ma5d4evk/ma5d4evk.c b/board/aries/ma5d4evk/ma5d4evk.c index 9c1ba58166..0293b29d0e 100644 --- a/board/aries/ma5d4evk/ma5d4evk.c +++ b/board/aries/ma5d4evk/ma5d4evk.c @@ -205,14 +205,13 @@ int board_mmc_init(bd_t *bis) at91_set_pio_output(AT91_PIO_PORTE, 15, 1); at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0); - ret = atmel_mci_init((void *)ATMEL_BASE_MCI0); + ret = atmel_mci_init((void *)ATMEL_BASE_MCI1); if (ret) /* eMMC init failed, skip it. */ at91_set_pio_output(AT91_PIO_PORTE, 15, 0); /* Enable the power supply to On-board MicroSD */ at91_set_pio_output(AT91_PIO_PORTE, 17, 0); - - ret = atmel_mci_init((void *)ATMEL_BASE_MCI1); + ret = atmel_mci_init((void *)ATMEL_BASE_MCI0); if (ret) /* uSD init failed, power it down. */ at91_set_pio_output(AT91_PIO_PORTE, 17, 1); diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index 4bcbf2cb13..0bb1ebb2f9 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -130,9 +130,9 @@ "consdev=ttyS3\0" \ "baudrate=115200\0" \ "bootscript=boot.scr\0" \ - "bootdev=/dev/mmcblk1p1\0" \ - "bootpart=1:1\0" \ - "rootdev=/dev/mmcblk1p2\0" \ + "bootdev=/dev/mmcblk0p1\0" \ + "bootpart=0:1\0" \ + "rootdev=/dev/mmcblk0p2\0" \ "netdev=eth0\0" \ "dfu_alt_info=mmc raw 0 3867148288\0" \ "kernel_addr_r=0x22000000\0" \ @@ -189,8 +189,8 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ - "if test -e mmc ${bootpart} ${bootscript} ; then " \ - "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\ + "if test -e mmc 1:1 ${bootscript} ; then " \ + "if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \ "then ; " \ "echo Running bootscript... ; " \ "source ${kernel_addr_r} ; " \ -- 2.39.5