The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
make kselftest-all O=objdir builds create generated objects in objdir.
This clutters the top level directory with kselftest objects. Fix it
to create sub-directory under objdir for kselftest objects.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Commit 8996bd12f319 ("mbcache: automatically delete entries from cache
on freeing") started nesting cache->c_list_lock under the bit locks
protecting hash buckets of the mbcache hash table in
mb_cache_entry_create(). This causes problems for real-time kernels
because there spinlocks are sleeping locks while bitlocks stay atomic.
Luckily the nesting is easy to avoid by holding entry reference until
the entry is added to the LRU list. This makes sure we cannot race with
entry deletion.
Cc: stable@kernel.org Fixes: 8996bd12f319 ("mbcache: automatically delete entries from cache on freeing") Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908091032.10513-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 558a16210318 ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.
The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.
While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).
Reported-by: syzbot+7bb7cd3595533513a9e7@syzkaller.appspotmail.com Fixes: 558a16210318 ("hfs/hfsplus: use WARN_ON for sanity check") Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find") Link: https://lore.kernel.org/lkml/000000000000dbce4e05f170f289@google.com/ Tested-by: Michael Schmitz <schmitzmic@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc warns about a couple of instances in which a sanity check exists but
the author wasn't sure how to react to it failing, which makes it look
like a possible bug:
fs/hfsplus/inode.c: In function 'hfsplus_cat_read_inode':
fs/hfsplus/inode.c:503:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
503 | /* panic? */;
| ^
fs/hfsplus/inode.c:524:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
524 | /* panic? */;
| ^
fs/hfsplus/inode.c: In function 'hfsplus_cat_write_inode':
fs/hfsplus/inode.c:582:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
582 | /* panic? */;
| ^
fs/hfsplus/inode.c:608:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
608 | /* panic? */;
| ^
fs/hfs/inode.c: In function 'hfs_write_inode':
fs/hfs/inode.c:464:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
464 | /* panic? */;
| ^
fs/hfs/inode.c:485:37: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
485 | /* panic? */;
| ^
panic() is probably not the correct choice here, but a WARN_ON
seems appropriate and avoids the compile-time warning.
Link: https://lkml.kernel.org/r/20210927102149.1809384-1-arnd@kernel.org Link: https://lore.kernel.org/all/20210322223249.2632268-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mounting a filesystem whose journal inode has the encrypt flag causes a
NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt'
mount option is used.
The problem is that when jbd2_journal_init_inode() calls bmap(), it
eventually finds its way into ext4_iomap_begin(), which calls
fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if
the inode is encrypted, then its encryption key must already be set up.
That's not the case here, since the journal inode is never "opened" like
a normal file would be. Hence the crash.
To fix this, make ext4 consider journal inodes with the encrypt flag to
be invalid. (Note, maybe other flags should be rejected on the journal
inode too. For now, this is just the minimal fix for the above issue.)
I've marked this as fixing the commit that introduced the call to
fscrypt_limit_io_blocks(), since that's what made an actual crash start
being possible. But this fix could be applied to any version of ext4
that supports the encrypt feature.
Reported-by: syzbot+ba9dac45bc76c490b7c3@syzkaller.appspotmail.com Fixes: 9b3c26bf3989 ("ext4: support direct I/O with fscrypt using blk-crypto") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221102053312.189962-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
If v4 READDIR operation hits a mountpoint and gets back an error,
then it will include that entry in the reply and set RDATTR_ERROR for it
to the error.
That's fine for "normal" exported filesystems, but on the v4root, we
need to be more careful to only expose the existence of dentries that
lead to exports.
If the mountd upcall times out while checking to see whether a
mountpoint on the v4root is exported, then we have no recourse other
than to fail the whole operation.
Cc: Steve Dickson <steved@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216777 Reported-by: JianHong Yin <yin-jianhong@163.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.
Fixes: 1f3868f06855 ("udf: Fix extending file within last block") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID.
Fixes: e4ade79155f7 ("USB: rndis_host, various cleanups") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If asked to drop a packet via TC_ACT_SHOT it is unsafe to assume
res.class contains a valid pointer Fixes: 45255a370237 ("[NET_SCHED]: sch_atm: Lindent") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, when modifying DC, we validate max_rd_atomic user attribute
against the RC cap, validate against DC. RC and DC QP types have different
device limitations.
This can cause userspace created DC QPs to malfunction.
of_phy_find_device() return device node with refcount incremented.
Call put_device() to relese it when not needed anymore.
Fixes: 8e8c330ad34d ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver does not call tasklet_kill in several places.
Add the calls to fix it.
Fixes: f43c3d6c3420 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
vhost_iotlb_itree_first() requires `start` and `last` parameters
to search for a mapping that overlaps the range.
In translate_desc() we cyclically call vhost_iotlb_itree_first(),
incrementing `addr` by the amount already translated, so rightly
we move the `start` parameter passed to vhost_iotlb_itree_first(),
but we should hold the `last` parameter constant.
Let's fix it by saving the `last` parameter value before incrementing
`addr` in the loop.
Fixes: a79c3d5aaa30 ("vhost: convert pre sorted vhost memory array to interval tree") Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221109102503.18816-3-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
nfc_get_device() take reference for the device, add missing
nfc_put_device() to release it when not need anymore.
Also fix the style warnning by use error EOPNOTSUPP instead of
ENOTSUPP.
Fixes: a3e422aad685 ("NFC: netlink: SE API implementation") Fixes: 9714fca9d18b ("nfc: netlink: Add capability to reply to vendor_cmd with data") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
adapter->dcb would get silently freed inside qlcnic_dcb_enable() in
case qlcnic_dcb_attach() would return an error, which always happens
under OOM conditions. This would lead to use-after-free because both
of the existing callers invoke qlcnic_dcb_get_info() on the obtained
pointer, which is potentially freed at that point.
Propagate errors from qlcnic_dcb_enable(), and instead free the dcb
pointer at callsite using qlcnic_dcb_free(). This also removes the now
unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around
kfree() also causing memory leaks for partially initialized dcb.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: 76eb33da729c ("qlcnic: Disable DCB operations from SR-IOV VFs") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Kernel uses tcindex_change() to change an existing
filter properties.
Yet the problem is that, during the process of changing,
if `old_r` is retrieved from `p->perfect`, then
kernel uses tcindex_alloc_perfect_hash() to newly
allocate filter results, uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure, which triggers the above memory leak.
To be more specific, there are only two source for the `old_r`,
according to the tcindex_lookup(). `old_r` is retrieved from
`p->perfect`, or `old_r` is retrieved from `p->h`.
* If `old_r` is retrieved from `p->perfect`, kernel uses
tcindex_alloc_perfect_hash() to newly allocate the
filter results. Then `r` is assigned with `cp->perfect + handle`,
which is newly allocated. So condition `old_r && old_r != r` is
true in this situation, and kernel uses tcindex_filter_result_init()
to clear the old filter result, without destroying
its tcf_exts structure
* If `old_r` is retrieved from `p->h`, then `p->perfect` is NULL
according to the tcindex_lookup(). Considering that `cp->h`
is directly copied from `p->h` and `p->perfect` is NULL,
`r` is assigned with `tcindex_lookup(cp, handle)`, whose value
should be the same as `old_r`, so condition `old_r && old_r != r`
is false in this situation, kernel ignores using
tcindex_filter_result_init() to clear the old filter result.
So only when `old_r` is retrieved from `p->perfect` does kernel use
tcindex_filter_result_init() to clear the old filter result, which
triggers the above memory leak.
Considering that there already exists a tc_filter_wq workqueue
to destroy the old tcindex_data by tcindex_partial_destroy_work()
at the end of tcindex_set_parms(), this patch solves
this memory leak bug by removing this old filter result
clearing part and delegating it to the tc_filter_wq workqueue.
Note that this patch doesn't introduce any other issues. If
`old_r` is retrieved from `p->perfect`, this patch just
delegates old filter result clearing part to the
tc_filter_wq workqueue; If `old_r` is retrieved from `p->h`,
kernel doesn't reach the old filter result clearing part, so
removing this part has no effect.
[Thanks to the suggestion from Jakub Kicinski, Cong Wang, Paolo Abeni
and Dmitry Vyukov]
Fixes: 224fdce15787 ("net_sched: properly handle failure case of tcf_exts_init()") Link: https://lore.kernel.org/all/0000000000001de5c505ebc9ec59@google.com/ Reported-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com Tested-by: syzbot+232ebdbd36706c965ebf@syzkaller.appspotmail.com Cc: Cong Wang <cong.wang@bytedance.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently keep alive message between PF and VF may be lost and the VF is
unalive in PF. So the VF will not do reset during PF FLR reset process.
This would make the allocated interrupt resources of VF invalid and VF
would't receive or respond to PF any more.
So this patch adds VF interrupts re-initialization during VF FLR for VF
recovery in above cases.
Fixes: 13fcfd88669f ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, we shut down the filecache before trying to clean up the
stateids that depend on it. This leads to the kernel trying to free an
nfsd_file twice, and a refcount overput on the nf_mark.
Change the shutdown procedure to tear down all of the stateids prior
to shutting down the filecache.
Reported-and-tested-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Fixes: 2a16f2600ccc ("nfsd: nfsd_file cache entries should be per net namespace") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Anand hit a BUG() when pulling off headers on egress to a SW tunnel.
We get to skb_checksum_help() with an invalid checksum offset
(commit 12c3f2db7a9f ("net: remove two BUG() from skb_checksum_help()")
converted those BUGs to WARN_ONs()).
He points out oddness in how skb_postpull_rcsum() gets used.
Indeed looks like we should pull before "postpull", otherwise
the CHECKSUM_PARTIAL fixup from skb_postpull_rcsum() will not
be able to do its job:
Commit 28460803dd20 ("SUNRPC: allow for upcalls for the same uid
but different gss service") introduced `auth` argument to
__gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL
since it (and auth->service) was not (yet) determined.
When multiple upcalls with the same uid and different service are
ongoing, it could happen that __gss_find_upcall(), which returns the
first match found in the pipe->in_downcall list, could not find the
correct gss_msg corresponding to the downcall we are looking for.
Moreover, it might return a msg which is not sent to rpc.gssd yet.
We could see mount.nfs process hung in D state with multiple mount.nfs
are executed in parallel. The call trace below is of CentOS 7.9
kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/
elrepo kernel-ml-6.0.7-1.el7.
The scenario is like this. Let's say there are two upcalls for
services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe.
When rpc.gssd reads pipe to get the upcall msg corresponding to
service B from pipe->pipe and then writes the response, in
gss_pipe_downcall the msg corresponding to service A will be picked
because only uid is used to find the msg and it is before the one for
B in pipe->in_downcall. And the process waiting for the msg
corresponding to service A will be woken up.
Actual scheduing of that process might be after rpc.gssd processes the
next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A).
The process is scheduled to see gss_msg->ctx == NULL and
gss_msg->msg.errno == 0, therefore it cannot break the loop in
gss_create_upcall and is never woken up after that.
This patch adds a simple check to ensure that a msg which is not
sent to rpc.gssd yet is not chosen as the matching upcall upon
receiving a downcall.
Signed-off-by: minoura makoto <minoura@valinux.co.jp> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@nec.com> Tested-by: Hiroshi Shimamoto <h-shimamoto@nec.com> Cc: Trond Myklebust <trondmy@hammerspace.com> Fixes: 28460803dd20 ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When manipulating xattr blocks, we can deadlock infinitely looping
inside ext4_xattr_block_set() where we constantly keep finding xattr
block for reuse in mbcache but we are unable to reuse it because its
reference count is too big. This happens because cache entry for the
xattr block is marked as reusable (e_reusable set) although its
reference count is too big. When this inconsistency happens, this
inconsistent state is kept indefinitely and so ext4_xattr_block_set()
keeps retrying indefinitely.
The inconsistent state is caused by non-atomic update of e_reusable bit.
e_reusable is part of a bitfield and e_reusable update can race with
update of e_referenced bit in the same bitfield resulting in loss of one
of the updates. Fix the problem by using atomic bitops instead.
This bug has been around for many years, but it became *much* easier
to hit after commit c36112767922 ("ext4: fix race when reusing xattr
blocks").
Cc: stable@vger.kernel.org Fixes: 61d17f2f0093 ("mbcache: add reusable flag to cache entries") Fixes: c36112767922 ("ext4: fix race when reusing xattr blocks") Reported-and-tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Reported-by: Thilo Fromm <t-lo@linux.microsoft.com> Link: https://lore.kernel.org/r/c77bf00f-4618-7149-56f1-b8d1664b9d07@linux.microsoft.com/ Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20221123193950.16758-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use the fact that entries with elevated refcount are not removed from
the hash and just move removal of the entry from the hash to the entry
freeing time. When doing this we also change the generic code to hold
one reference to the cache entry, not two of them, which makes code
somewhat more obvious.
Later the code in ext4_xattr_block_set() finds out the block got freed
and cancels reusal of the block but the revoke stays canceled and so in
case of block reuse and journal replay the filesystem can get corrupted.
If the race works out slightly differently, we can also hit assertions
in the jbd2 code.
Fix the problem by making sure that once matching mbcache entry is
found, code dropping the last xattr block reference (or trying to modify
xattr block in place) waits until the mbcache entry reference is
dropped. This way code trying to reuse xattr block is protected from
someone trying to drop the last reference to xattr block.
Reported-and-tested-by: Ritesh Harjani <ritesh.list@gmail.com> CC: stable@vger.kernel.org Fixes: 4e4b07fdbb82 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-5-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption") Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove unnecessary else (and thus indentation level) from a code block
in ext4_xattr_block_set(). It will also make following code changes
easier. No functional changes.
CC: stable@vger.kernel.org Fixes: 4e4b07fdbb82 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we remove EA inode from mbcache as soon as its xattr refcount
drops to zero. However there can be pending attempts to reuse the inode
and thus refcount handling code has to handle the situation when
refcount increases from zero anyway. So save some work and just keep EA
inode in mbcache until it is getting evicted. At that moment we are sure
following iget() of EA inode will fail anyway (or wait for eviction to
finish and load things from the disk again) and so removing mbcache
entry at that moment is fine and simplifies the code a bit.
CC: stable@vger.kernel.org Fixes: 4e4b07fdbb82 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add function mb_cache_entry_delete_or_get() to delete mbcache entry if
it is unused and also add a function to wait for entry to become unused
- mb_cache_entry_wait_unused(). We do not share code between the two
deleting function as one of them will go away soon.
CC: stable@vger.kernel.org Fixes: 4e4b07fdbb82 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption") Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not reclaim entries that are currently used by somebody from a
shrinker. Firstly, these entries are likely useful. Secondly, we will
need to keep such entries to protect pending increment of xattr block
refcount.
CC: stable@vger.kernel.org Fixes: 4e4b07fdbb82 ("ext4: convert to mbcache2") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220712105436.32204-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption") Signed-off-by: Sasha Levin <sashal@kernel.org>
Working through a conversion to a call kmap_local_page() instead of
kmap() revealed many places where the pattern kmap/memcpy/kunmap
occurred.
Eric Biggers, Matthew Wilcox, Christoph Hellwig, Dan Williams, and Al
Viro all suggested putting this code into helper functions. Al Viro
further pointed out that these functions already existed in the iov_iter
code.[1]
Various locations for the lifted functions were considered.
Headers like mm.h or string.h seem ok but don't really portray the
functionality well. pagemap.h made some sense but is for page cache
functionality.[2]
Another alternative would be to create a new header for the promoted
memcpy functions, but it masks the fact that these are designed to copy
to/from pages using the kernel direct mappings and complicates matters
with a new header.
Placing these functions in 'highmem.h' is suboptimal especially with the
changes being proposed in the functionality of kmap. From a caller
perspective including/using 'highmem.h' implies that the functions
defined in that header are only required when highmem is in use which is
increasingly not the case with modern processors. However, highmem.h is
where all the current functions like this reside (zero_user(),
clear_highpage(), clear_user_highpage(), copy_user_highpage(), and
copy_highpage()). So it makes the most sense even though it is
distasteful for some.[3]
Lift memcpy_to_page() and memcpy_from_page() to pagemap.h.
Cc: Boris Pismenny <borisp@mellanox.com> Cc: Or Gerlitz <gerlitz.or@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Dan Williams <dan.j.williams@intel.com> Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Suggested-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 956510c0c743 ("fs: ext4: initialize fsdata in pagecache_write()") Signed-off-by: Sasha Levin <sashal@kernel.org>
When we used the journal_async_commit mounting option in nojournal mode,
the kernel told me that "can't mount with journal_checksum", was very
confusing. I find that when we mount with journal_async_commit, both the
JOURNAL_ASYNC_COMMIT and EXPLICIT_JOURNAL_CHECKSUM flags are set. However,
in the error branch, CHECKSUM is checked before ASYNC_COMMIT. As a result,
the above inconsistency occurs, and the ASYNC_COMMIT branch becomes dead
code that cannot be executed. Therefore, we exchange the positions of the
two judgments to make the error msg more accurate.
Before these two branches neither loaded the journal nor created the
xattr cache. So the right label to goto is 'failed_mount3a'. Although
this did not cause any issues because the error handler validated if the
pointer is null. However this still made me confused when reading
the code. So it's still worth to modify to goto the right label.
Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220916141527.1012715-2-yanaijie@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 89481b5fa8c0 ("ext4: correct inconsistent error msg in nojournal mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
Consider the call to unregister_netdev()
unregister_netdev->unregister_netdevice_queue->rollback_registered_many
that calls the below functions which access the registers after
pm_runtime_put_sync()
1) ravb_get_stats
2) ravb_close
Fixes: a6c893cbad16 ("Renesas Ethernet AVB driver proper") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221214105118.2495313-1-biju.das.jz@bp.renesas.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the
feature is supported in hardware and enabled in KVM's base, non-nested
configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported.
This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail
if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and
obviously allows L1 to enable the feature for L2.
KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing
the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when
updating secondary controls in response to KVM_SET_CPUID(2), but (a) that
depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID
updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction
that the guest value must be a strict subset of the supported host value.
Although no past commit explicitly enabled nested support for WAITPKG,
doing so is safe and functionally correct from an architectural
perspective as no additional KVM support is needed to virtualize TPAUSE,
UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards
VM-Exits to L1 as necessary (commit 547fab3774b1, "KVM: vmx: Introduce
handle_unexpected_vmexit and handle WAITPKG vmexit").
Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in
hardware, i.e. always runs both L1 and L2 with the host's power management
settings for TPAUSE and UMWAIT. See commit e6d41e2c4fdf ("KVM: VMX: Stop
context switching MSR_IA32_UMWAIT_CONTROL") for more details.
Fixes: a8b7181fd1b4 ("KVM: x86: Add support for user wait instructions") Cc: stable@vger.kernel.org Reported-by: Aaron Lewis <aaronlewis@google.com> Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20221213062306.667649-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's enough to check the exit value and issue a direct call to avoid
the retpoline for all the common vmexit reasons.
Of course CONFIG_RETPOLINE already forbids gcc to use indirect jumps
while compiling all switch() statements, however switch() would still
allow the compiler to bisect the case value. It's more efficient to
prioritize the most frequent vmexits instead.
The halt may be slow paths from the point of the guest, but not
necessarily so from the point of the host if the host runs at full CPU
capacity and no host CPU is ever left idle.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: 31de69f4eea7 ("KVM: nVMX: Properly expose ENABLE_USR_WAIT_PAUSE control to L1") Signed-off-by: Sasha Levin <sashal@kernel.org>
Any debugging information entry representing the declaration of an object,
module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
DW_AT_decl_column attributes, each of whose value is an unsigned integer
constant.
So it should be an unsigned integer data. Also, even though the standard
doesn't clearly say the DW_AT_call_file is signed or unsigned, the
elfutils (eu-readelf) interprets it as unsigned integer data and it is
natural to handle it as unsigned integer data as same as DW_AT_decl_file.
This changes the DW_AT_call_file as unsigned integer data too.
Fixes: b398bb7bef873acb ("perf probe: Filter out redundant inline-instances") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/166761727445.480106.3738447577082071942.stgit@devnote3 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use dwarf_attr_integrate() instead of dwarf_attr() for generic attribute
acccessor functions, so that it can find the specified attribute from
abstact origin DIE etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/166731051988.2100653.13595339994343449770.stgit@devnote3 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: a9dfc46c67b5 ("perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data") Signed-off-by: Sasha Levin <sashal@kernel.org>
During error on CLOSE_INSTANCE command, ctx_work_bits was not getting
cleared. During consequent mfc execution NULL pointer dereferencing of
this context led to kernel panic. This patch fixes this issue by making
sure to clear ctx_work_bits always.
On receiving last buffer driver puts MFC to MFCINST_FINISHING state which
in turn skips transferring of frame from SRC to REF queue. This causes
driver to stop MFC encoding and last frame is lost.
This patch guarantees safe handling of frames during MFCINST_FINISHING and
correct clearing of workbit to avoid early stopping of encoding.
The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.
The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.
Now, extended attribute value maximum length is 64K. The memory
requested here does not need continuous physical addresses, so it is
appropriate to use kvmalloc to request memory. At the same time, it
can also cope with the situation that the extended attribute will
become longer in the future.
Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221208023233.1231330-3-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When expanding inode space in ext4_expand_extra_isize_ea() we may need
to allocate external xattr block. If quota is not initialized for the
inode, the block allocation will not be accounted into quota usage. Make
sure the quota is initialized before we try to expand inode space.
Make sure we initialize quotas before possibly expanding inode space
(and thus maybe needing to allocate external xattr block) in
ext4_ioctl_setproject(). This prevents not accounting the necessary
block allocation.
This occurs in 'ext4_xattr_inode_create()'. If 'ext4_mark_inode_dirty()'
fails, dropping i_nlink of the inode is needed. Or will lead to inode leak.
Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221208023233.1231330-5-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 984ea3e1a886 ("ext4: limit block allocations for indirect-block
files to < 2^32") added code to try to allocate xattr block with 32-bit
block number for indirect block based files on the grounds that these
files cannot use larger block numbers. It also added BUG_ON when
allocated block could not fit into 32 bits. This is however bogus
reasoning because xattr block is stored in inode->i_file_acl and
inode->i_file_acl_hi and as such even indirect block based files can
happily use full 48 bits for xattr block number. The proper handling
seems to be there basically since 64-bit block number support was added.
So remove the bogus limitation and BUG_ON.
Cc: Eric Sandeen <sandeen@redhat.com> Fixes: 984ea3e1a886 ("ext4: limit block allocations for indirect-block files to < 2^32") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221121130929.32031-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a block is out of range in ext4_get_branch(), -ENOMEM will be returned
to user-space. Obviously, this error code isn't really useful. This
patch fixes it by making sure the right error code (-EFSCORRUPTED) is
propagated to user-space. EUCLEAN is more informative than ENOMEM.
When a backup superblock is updated in update_backups(), the primary
superblock's offset in the group (that is, sbi->s_sbh->b_blocknr) is used
as the backup superblock's offset in its group. However, when the block
size is 1K and bigalloc is enabled, the two offsets are not equal. This
causes the backup group descriptors to be overwritten by the superblock
in update_backups(). Moreover, if meta_bg is enabled, the file system will
be corrupted because this feature uses backup group descriptors.
To solve this issue, we use a more accurate ext4_group_first_block_no() as
the offset of the backup superblock in its group.
Fixes: faf538cfe89f ("ext4: add support for online resizing with bigalloc") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20221117040341.1380702-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When converting files with inline data to extents, delayed allocations
made on a file system created with both the bigalloc and inline options
can result in invalid extent status cache content, incorrect reserved
cluster counts, kernel memory leaks, and potential kernel panics.
With bigalloc, the code that determines whether a block must be
delayed allocated searches the extent tree to see if that block maps
to a previously allocated cluster. If not, the block is delayed
allocated, and otherwise, it isn't. However, if the inline option is
also used, and if the file containing the block is marked as able to
store data inline, there isn't a valid extent tree associated with
the file. The current code in ext4_clu_mapped() calls
ext4_find_extent() to search the non-existent tree for a previously
allocated cluster anyway, which typically finds nothing, as desired.
However, a side effect of the search can be to cache invalid content
from the non-existent tree (garbage) in the extent status tree,
including bogus entries in the pending reservation tree.
To fix this, avoid searching the extent tree when allocating blocks
for bigalloc + inline files that are being converted from inline to
extent mapped.
As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty,
which may trigger expand 'extra_isize' and allocate block. If inode
didn't init quota will lead to warning. To solve above issue, init
'old.inode' firstly in 'ext4_rename'.
Reported-by: syzbot+98346927678ac3059c77@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221107015335.2524319-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the above issue, ioctl invokes the swap_inode_boot_loader function to
swap inode<5> and inode<12>. However, inode<5> contain incorrect imode and
disordered extents, and i_nlink is set to 1. The extents check for inode in
the ext4_iget function can be bypassed bacause 5 is EXT4_BOOT_LOADER_INO.
While links_count is set to 1, the extents are not initialized in
swap_inode_boot_loader. After the ioctl command is executed successfully,
the extents are swapped to inode<12>, in this case, run the `cat` command
to view inode<12>. And Bug_ON is triggered due to the incorrect extents.
When the boot loader inode is not initialized, its imode can be one of the
following:
1) the imode is a bad type, which is marked as bad_inode in ext4_iget and
set to S_IFREG.
2) the imode is good type but not S_IFREG.
3) the imode is S_IFREG.
The BUG_ON may be triggered by bypassing the check in cases 1 and 2.
Therefore, when the boot loader inode is bad_inode or its imode is not
S_IFREG, initialize the inode to avoid triggering the BUG.
Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-5-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When bigalloc is enabled, reserved cluster accounting for delayed
allocation is handled in extent_status.c. With a corrupted file
system, it's possible for this accounting to be incorrect,
dsicovered by Syzbot:
EXT4-fs error (device loop0): ext4_validate_block_bitmap:398: comm rep:
bg 0: block 5: invalid block bitmap
EXT4-fs (loop0): Delayed block allocation failed for inode 18 at logical
offset 0 with max blocks 32 with error 28
EXT4-fs (loop0): This should not happen!! Data will be lost
Before quota is enabled, a check on the preset quota inums in
ext4_super_block is added to prevent wrong quota inodes from being loaded.
In addition, when the quota fails to be enabled, the quota type and quota
inum are printed to facilitate fault locating.
Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-3-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)
Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in fs/ext4/ext4.h:591:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ext4_init_fs+0x5a/0x277
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: e422d280d80e ("ext4: ensure Inode flags consistency are checked at build time") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221031055833.3966222-1-cuigaosheng1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this issue, bg_inode_table_hi is overwritten as an incorrect value.
As a result, `block < end_block` cannot be met in grow_dev_page.
Therefore, __ext4_get_inode_loc always returns '-ENOMEM' and do_writepages
keeps retrying. As a result, the writeback process is in the D state due
to an infinite loop.
Add a check on inode table block in the __ext4_get_inode_loc function by
referring to ext4_read_inode_bitmap to avoid this infinite loop.
Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.
A typical DP-MST unplug removes a KMS connector. However care must
be taken to properly synchronize with user-space. The expected
sequence of events is the following:
1. The kernel notices that the DP-MST port is gone.
2. The kernel marks the connector as disconnected, then sends a
uevent to make user-space re-scan the connector list.
3. User-space notices the connector goes from connected to disconnected,
disables it.
4. Kernel handles the IOCTL disabling the connector. On success,
the very last reference to the struct drm_connector is dropped and
drm_connector_cleanup() is called.
5. The connector is removed from the list, and a uevent is sent to tell
user-space that the connector disappeared.
The very last step was missing. As a result, user-space thought the
connector still existed and could try to disable it again. Since the
kernel no longer knows about the connector, that would end up with
EINVAL and confused user-space.
Fix this by sending a hotplug uevent from drm_connector_cleanup().
Signed-off-by: Simon Ser <contact@emersion.fr> Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude Paul <lyude@redhat.com> Cc: Jonas Ådahl <jadahl@redhat.com> Tested-by: Jonas Ådahl <jadahl@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-2-contact@emersion.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When add the 'a *:* rwm' entry to devcgroup A's whitelist, at first A's
exceptions will be cleaned and A's behavior is changed to
DEVCG_DEFAULT_ALLOW. Then parent's exceptions will be copyed to A's
whitelist. If copy failure occurs, just return leaving A to grant
permissions to all devices. And A may grant more permissions than
parent.
Backup A's whitelist and recover original exceptions after copy
failure.
Cc: stable@vger.kernel.org Fixes: 53ea10b1e18f ("device_cgroup: add proper checking when changing default behavior") Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com> Reviewed-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second (UID) strcmp in acpi_dev_hid_uid_match considers
"0" and "00" different, which can prevent device registration.
Have the AMD IOMMU driver's ivrs_acpihid parsing code remove
any leading zeroes to make the UID strcmp succeed. Now users
can safely specify "AMDxxxxx:00" or "AMDxxxxx:0" and expect
the same behaviour.
When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.
pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present. Check the PF instead.
Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:
This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device(). The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().
[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag] Link: https://lore.kernel.org/r/20221026060912.173250-1-mst@redhat.com Reported-by: Wei Gong <gongwei833x@gmail.com> Tested-by: Wei Gong <gongwei833x@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erase can be zeroed in spi_nor_parse_4bait() or
spi_nor_init_non_uniform_erase_map(). In practice it happened with
mt25qu256a, which supports 4K, 32K, 64K erases with 3b address commands,
but only 4K and 64K erase with 4b address commands.
Fixes: 94fd364f3325 ("mtd: spi-nor: fix erase_type array to indicate current map conf") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211119081412.29732-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When fixing the problem mentioned in PATCH1, we also found
the following problem:
If the IPMI is disconnected and in the sending process, the
uninstallation driver will be stuck for a long time.
The main problem is that uninstalling the driver waits for curr_msg to
be sent or HOSED. After stopping tasklet, the only place to trigger the
timeout mechanism is the circular poll in shutdown_smi.
The poll function delays 10us and calls smi_event_handler(smi_info,10).
Smi_event_handler deducts 10us from kcs->ibf_timeout.
But the poll func is followed by schedule_timeout_uninterruptible(1).
The time consumed here is not counted in kcs->ibf_timeout.
So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has
actually passed. The waiting time has increased by more than a
hundredfold.
Now instead of calling poll(). call smi_event_handler() directly and
calculate the elapsed time.
For verification, you can directly use ebpf to check the kcs->
ibf_timeout for each call to kcs_event() when IPMI is disconnected.
Decrement at normal rate before unloading. The decrement rate becomes
very slow after unloading.
- limit bitmap chunk size internal u64 variable to values not overflowing
the u32 bitmap superblock structure variable stored on persistent media
- assign bitmap chunk size internal u64 variable from unsigned values to
avoid possible sign extension artifacts when assigning from a s32 value
The bug has been there since at least kernel 4.0.
Steps to reproduce it:
1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2
-n2 /dev/rnbd1 /dev/rnbd2
2 resize member device rnbd1 and rnbd2 to 8 TB
3 mdadm --grow /dev/mdx --size=max
The bitmap_chunksize will overflow without patch.
Cc: stable@vger.kernel.org Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Three mount options: "tcpnodelay" and "noautotune" and "noblocksend"
were not displayed when passed in on cifs/smb3 mounts (e.g. displayed
in /proc/mounts e.g.). No change to defaults so these are not
displayed if not specified on mount.
Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since rc was initialised to -ENOMEM in cifs_get_smb_ses(), when an
existing smb session was found, free_xid() would be called and then
print
CIFS: fs/cifs/connect.c: Existing tcp session with server found
CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 44 with uid: 0
CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 44) rc = -12
Fix this by initialising rc to 0 and then let free_xid() print this
instead
CIFS: fs/cifs/connect.c: Existing tcp session with server found
CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 14 with uid: 0
CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 14) rc = 0
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dvb-core tries to sync the releases of opened files at
dvb_dmxdev_release() with two refcounts: dvbdev->users and
dvr_dvbdev->users. A problem is present in those two syncs: when yet
another dvb_demux_open() is called during those sync waits,
dvb_demux_open() continues to process even if the device is being
closed. This includes the increment of the former refcount, resulting
in the leftover refcount after the sync of the latter refcount at
dvb_dmxdev_release(). It ends up with use-after-free, since the
function believes that all usages were gone and releases the
resources.
This patch addresses the problem by adding the check of dmxdev->exit
flag at dvb_demux_open(), just like dvb_dvr_open() already does. With
the exit flag check, the second call of dvb_demux_open() fails, hence
the further corruption can be avoided.
Also for avoiding the races of the dmxdev->exit flag reference, this
patch serializes the dmxdev->exit set up and the sync waits with the
dmxdev->mutex lock at dvb_dmxdev_release(). Without the mutex lock,
dvb_demux_open() (or dvb_dvr_open()) may run concurrently with
dvb_dmxdev_release(), which allows to skip the exit flag check and
continue the open process that is being closed.
CVE-2022-41218 is assigned to those bugs above.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/20220908132754.30532-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed.
clang-15's ability to elide loops completely became more aggressive when
it can deduce how a variable is being updated in a loop. Counting down
one variable by an increment of another can be replaced by a modulo
operation.
For 64b variables on 32b ARM EABI targets, this can result in the
compiler generating calls to __aeabi_uldivmod, which it does for a do
while loop in float64_rem().
For the kernel, we'd generally prefer that developers not open code 64b
division via binary / operators and instead use the more explicit
helpers from div64.h. On arm-linux-gnuabi targets, failure to do so can
result in linkage failures due to undefined references to
__aeabi_uldivmod().
While developers can avoid open coding divisions on 64b variables, the
compiler doesn't know that the Linux kernel has a partial implementation
of a compiler runtime (--rtlib) to enforce this convention.
It's also undecidable for the compiler whether the code in question
would be faster to execute the loop vs elide it and do the 64b division.
While I actively avoid using the internal -mllvm command line flags, I
think we get better code than using barrier() here, which will force
reloads+spills in the loop for all toolchains.
Link: https://github.com/ClangBuiltLinux/linux/issues/1666 Reported-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The retries in load_ucode_intel_ap() were in place to support systems
with mixed steppings. Mixed steppings are no longer supported and there is
only one microcode image at a time. Any retries will simply reattempt to
apply the same image over and over without making progress.
[ bp: Zap the circumstantial reasoning from the commit message. ]
When generate a synthetic event with many params and then create a trace
action for it [1], kernel panic happened [2].
It is because that in trace_action_create() 'data->n_params' is up to
SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx'
keeps indices into array 'hist_data->var_refs' for each synthetic event
param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX
(current value is 16), so out-of-bound write happened when 'data->n_params'
more than 16. In this case, 'data->match_data.event' is overwritten and
eventually cause the panic.
To solve the issue, adjust the length of 'data->var_ref_idx' to be
SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write.
[1]
# cd /sys/kernel/tracing/
# echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63" >> synthetic_events
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \
events/sched/sched_waking/trigger
# echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger
Otherwise the commit that will be aborted will be associated with the
metadata objects that will be torn down. Must write needs_check flag
to metadata with a reset block manager.
Found through code-inspection (and compared against dm-thin.c).
projects / kernel.git / log