Ordered ops are started twice in sync file, once outside of inode mutex
and once inside, taking the dio semaphore. There was one error path
missing the semaphore unlock.
Fixes: 0e9d2c534def8 ("Btrfs: fix rare chances for data loss when doing a fast fsync") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add changelog ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we fail to load an fs root, or fail to start a transaction we can
bail without unsetting the reloc control, which leads to problems later
when we free the reloc control but still have it attached to the file
system.
In the normal path we'll end up calling unset_reloc_control() twice, but
all it does is set fs_info->reloc_control = NULL, and we can only have
one balance at a time so it's not racey.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When doing a fast fsync for a range that starts at an offset greater than
zero, we can end up with a log that when replayed causes the respective
inode miss a file extent item representing a hole if we are not using the
NO_HOLES feature. This is because for fast fsyncs we don't log any extents
that cover a range different from the one requested in the fsync.
Example scenario to trigger it:
$ mkfs.btrfs -O ^no-holes -f /dev/sdd
$ mount /dev/sdd /mnt
# Create a file with a single 256K and fsync it to clear to full sync
# bit in the inode - we want the msync below to trigger a fast fsync.
$ xfs_io -f -c "pwrite -S 0xab 0 256K" -c "fsync" /mnt/foo
# Force a transaction commit and wipe out the log tree.
$ sync
# Dirty 768K of data, increasing the file size to 1Mb, and flush only
# the range from 256K to 512K without updating the log tree
# (sync_file_range() does not trigger fsync, it only starts writeback
# and waits for it to finish).
# Now dirty the range from 768K to 1M again and sync that range.
$ xfs_io -c "mmap -w 768K 256K" \
-c "mwrite -S 0xef 768K 256K" \
-c "msync -s 768K 256K" \
-c "munmap" \
/mnt/foo
<power fail>
# Mount to replay the log.
$ mount /dev/sdd /mnt
$ umount /mnt
$ btrfs check /dev/sdd
Opening filesystem to check...
Checking filesystem on /dev/sdd
UUID: 482fb574-b288-478e-a190-a9c44a78fca6
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
root 5 inode 257 errors 100, file extent discount
Found file extent holes:
start: 262144, len: 524288
ERROR: errors found in fs roots
found 720896 bytes used, error(s) found
total csum bytes: 512
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 123514
file data blocks allocated: 589824
referenced 589824
Fix this issue by setting the range to full (0 to LLONG_MAX) when the
NO_HOLES feature is not enabled. This results in extra work being done
but it gives the guarantee we don't end up with missing holes after
replaying the log.
CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we have an error while building the backref tree in relocation we'll
process all the pending edges and then free the node. However if we
integrated some edges into the cache we'll lose our link to those edges
by simply freeing this node, which means we'll leak memory and
references to any roots that we've found.
Instead we need to use remove_backref_node(), which walks through all of
the edges that are still linked to this node and free's them up and
drops any root references we may be holding.
CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In my EIO stress testing I noticed I was getting forced to rescan the
uuid tree pretty often, which was weird. This is because my error
injection stuff would sometimes inject an error after log replay but
before we loaded the UUID tree. If log replay committed the transaction
it wouldn't have updated the uuid tree generation, but the tree was
valid and didn't change, so there's no reason to not update the
generation here.
Fix this by setting the BTRFS_FS_UPDATE_UUID_TREE_GEN bit immediately
after reading all the fs roots if the uuid tree generation matches the
fs generation. Then any transaction commits that happen during mount
won't screw up our uuid tree state, forcing us to do needless uuid
rescans.
Fixes: 35ce4202a6a3 ("Btrfs: check UUID tree during mount if required") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we do merge_reloc_roots() we could insert a few roots onto the dirty
subvol roots list, where we hold a ref on them. If we fail to start the
transaction we need to run clean_dirty_subvols() in order to cleanup the
refs.
CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During unmount we can have a job from the delayed inode items work queue
still running, that can lead to at least two bad things:
1) A crash, because the worker can try to create a transaction just
after the fs roots were freed;
2) A transaction leak, because the worker can create a transaction
before the fs roots are freed and just after we committed the last
transaction and after we stopped the transaction kthread.
The following diagram shows a sequence of steps that lead to the crash
during ummount of the filesystem:
CPU 1 CPU 2 CPU 3
btrfs_punch_hole()
btrfs_btree_balance_dirty()
btrfs_balance_delayed_items()
--> sees
fs_info->delayed_root->items
with value 200, which is greater
than
BTRFS_DELAYED_BACKGROUND (128)
and smaller than
BTRFS_DELAYED_WRITEBACK (512)
btrfs_wq_run_delayed_node()
--> queues a job for
fs_info->delayed_workers to run
btrfs_async_run_delayed_root()
btrfs_async_run_delayed_root()
--> job queued by CPU 1
--> starts picking and running
delayed nodes from the
prepare_list list
close_ctree()
btrfs_delete_unused_bgs()
btrfs_commit_super()
btrfs_join_transaction()
--> gets transaction N
btrfs_commit_transaction(N)
--> set transaction state
to TRANTS_STATE_COMMIT_START
btrfs_first_prepared_delayed_node()
--> picks delayed node X through
the prepared_list list
btrfs_run_delayed_items()
btrfs_first_delayed_node()
--> also picks delayed node X
but through the node_list
list
__btrfs_commit_inode_delayed_items()
--> runs all delayed items from
this node and drops the
node's item count to 0
through call to
btrfs_release_delayed_inode()
--> finishes running any remaining
delayed nodes
--> finishes transaction commit
--> stops cleaner and transaction threads
btrfs_free_fs_roots()
--> frees all roots and removes them
from the radix tree
fs_info->fs_roots_radix
btrfs_join_transaction()
start_transaction()
btrfs_record_root_in_trans()
record_root_in_trans()
radix_tree_tag_set()
--> crashes because
the root is not in
the radix tree
anymore
If the worker is able to call btrfs_join_transaction() before the unmount
task frees the fs roots, we end up leaking a transaction and all its
resources, since after the call to btrfs_commit_super() and stopping the
transaction kthread, we don't expect to have any transaction open anymore.
When this situation happens the worker has a delayed node that has no
more items to run, since the task calling btrfs_run_delayed_items(),
which is doing a transaction commit, picks the same node and runs all
its items first.
We can not wait for the worker to complete when running delayed items
through btrfs_run_delayed_items(), because we call that function in
several phases of a transaction commit, and that could cause a deadlock
because the worker calls btrfs_join_transaction() and the task doing the
transaction commit may have already set the transaction state to
TRANS_STATE_COMMIT_DOING.
Also it's not possible to get into a situation where only some of the
items of a delayed node are added to the fs/subvolume tree in the current
transaction and the remaining ones in the next transaction, because when
running the items of a delayed inode we lock its mutex, effectively
waiting for the worker if the worker is running the items of the delayed
node already.
Since this can only cause issues when unmounting a filesystem, fix it in
a simple way by waiting for any jobs on the delayed workers queue before
calling btrfs_commit_supper() at close_ctree(). This works because at this
point no one can call btrfs_btree_balance_dirty() or
btrfs_balance_delayed_items(), and if we end up waiting for any worker to
complete, btrfs_commit_super() will commit the transaction created by the
worker.
CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Note that leaf 29421568 doesn't have its backref in the extent tree.
Thus extent allocator can re-allocate leaf 29421568 for other trees.
In short, the bug is caused by:
- Existing tree block gets allocated to log tree
This got its generation bumped.
- Log tree balance cleaned dirty bit of offending tree block
It will not be written back to disk, thus no WRITTEN flag.
- Original owner of the tree block gets COWed
Since the tree block has higher transid, no WRITTEN flag, it's reused,
and not traced by transaction::dirty_pages.
- Transaction aborted
Tree blocks get cleaned according to transaction::dirty_pages. But the
offending tree block is not recorded at all.
- Filesystem unmount
All pages are assumed to be are clean, destroying all workqueue, then
call iput(btree_inode).
But offending tree block is still dirty, which triggers writeback, and
causes use-after-free bug.
The detailed sequence looks like this:
- Initial status
eb: 29421568, header=WRITTEN bflags_dirty=0, page_dirty=0, gen=8,
not traced by any dirty extent_iot_tree.
- New tree block is allocated
Since there is no backref for 29421568, it's re-allocated as new tree
block.
Keep in mind that tree block 29421568 is still referred by extent
tree.
- Tree block 29421568 is filled for log tree
eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9 << (gen bumped)
traced by btrfs_root::dirty_log_pages
- Some log tree operations
Since the fs is using node size 4096, the log tree can easily go a
level higher.
- Log tree needs balance
Tree block 29421568 gets all its content pushed to right, thus now
it is empty, and we don't need it.
btrfs_clean_tree_block() from __push_leaf_right() get called.
eb: 29421568, header=0 bflags_dirty=0, page_dirty=0, gen=9
traced by btrfs_root::dirty_log_pages
- Log tree write back
btree_write_cache_pages() goes through dirty pages ranges, but since
page of tree block 29421568 gets cleaned already, it's not written
back to disk. Thus it doesn't have WRITTEN bit set.
But ranges in dirty_log_pages are cleared.
eb: 29421568, header=0 bflags_dirty=0, page_dirty=0, gen=9
not traced by any dirty extent_iot_tree.
- Extent tree update when committing transaction
Since tree block 29421568 has transid equal to running trans, and has
no WRITTEN bit, should_cow_block() will use it directly without adding
it to btrfs_transaction::dirty_pages.
eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9
not traced by any dirty extent_iot_tree.
At this stage, we're doomed. We have a dirty eb not tracked by any
extent io tree.
- Transaction gets aborted due to corrupted extent tree
Btrfs cleans up dirty pages according to transaction::dirty_pages and
btrfs_root::dirty_log_pages.
But since tree block 29421568 is not tracked by neither of them, it's
still dirty.
eb: 29421568, header=0 bflags_dirty=1, page_dirty=1, gen=9
not traced by any dirty extent_iot_tree.
- Filesystem unmount
Since all cleanup is assumed to be done, all workqueus are destroyed.
Then iput(btree_inode) is called, expecting no dirty pages.
But tree 29421568 is still dirty, thus triggering writeback.
Since all workqueues are already freed, we cause use-after-free.
This shows us that, log tree blocks + bad extent tree can cause wild
dirty pages.
[FIX]
To fix the problem, don't submit any btree write bio if the filesytem
has any error. This is the last safe net, just in case other cleanup
haven't caught catch it.
Link: https://github.com/bobfuzzer/CVE/tree/master/CVE-2019-19377 CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when marking a block, we use spinand_erase_op() to erase
the block before writing the marker to the OOB area. Doing so without
waiting for the operation to finish can lead to the marking failing
silently and no bad block marker being written to the flash.
In fact we don't need to do an erase at all before writing the BBM.
The ECC is disabled for raw accesses to the OOB data and we don't
need to work around any issues with chips reporting ECC errors as it
is known to be the case for raw NAND.
For reading and writing the bad block markers, spinand->oobbuf is
currently used as a buffer for the marker bytes. During the
underlying read and write operations to actually get/set the content
of the OOB area, the content of spinand->oobbuf is reused and changed
by accessing it through spinand->oobbuf and/or spinand->databuf.
This is a flaw in the original design of the SPI NAND core and at the
latest from a55159a2adf5 ("mtd: spinand: Handle the case where
PROGRAM LOAD does not reset the cache") on, it results in not having
the bad block marker written at all, as the spinand->oobbuf is
cleared to 0xff after setting the marker bytes to zero.
To fix it, we now just store the two bytes for the marker on the
stack and let the read/write operations copy it from/to the page
buffer later.
This patch is used to fix the bug in collect_uncached_read_data()
that rc is automatically converted from a signed number to an
unsigned number when the CIFS asynchronous read fails.
It will cause ctx->rc is error.
Example:
Share a directory and create a file on the Windows OS.
Mount the directory to the Linux OS using CIFS.
On the CIFS client of the Linux OS, invoke the pread interface to
deliver the read request.
The size of the read length plus offset of the read request is greater
than the maximum file size.
In this case, the CIFS server on the Windows OS returns a failure
message (for example, the return value of
smb2.nt_status is STATUS_INVALID_PARAMETER).
After receiving the response message, the CIFS client parses
smb2.nt_status to STATUS_INVALID_PARAMETER
and converts it to the Linux error code (rdata->result=-22).
Then the CIFS client invokes the collect_uncached_read_data function to
assign the value of rdata->result to rc, that is, rc=rdata->result=-22.
The type of the ctx->total_len variable is unsigned integer,
the type of the rc variable is integer, and the type of
the ctx->rc variable is ssize_t.
Therefore, during the ternary operation, the value of rc is
automatically converted to an unsigned number. The final result is
ctx->rc=4294967274. However, the expected result is ctx->rc=-22.
Signed-off-by: Yilu Lin <linyilu@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are cases when we don't want to send the SMB2 flush operation
(e.g. when user specifies mount parm "nostrictsync") and it can be
a very expensive operation on the server. In most cases in order
to set mtime, we simply need to flush (write) the dirtry pages from
the client and send the writes to the server not also send a flush
protocol operation to the server.
Fixes: a51397eb7cad ("cifs: flush before set-info if we have writeable handles") CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If KVM wasn't used at all before we crash the cleanup procedure fails with
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
Oops: 0000 [#8] SMP PTI
CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G D 5.6.0-rc2+ #823
RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]
The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.
Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.
Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.
Fixes: 337cbbdf1b83 ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a hand coded assembly trampoline to preserve volatile registers
across vmread_error(), and to handle the calling convention differences
between 64-bit and 32-bit due to asmlinkage on vmread_error(). Pass
@field and @fault on the stack when invoking the trampoline to avoid
clobbering volatile registers in the context of the inline assembly.
Calling vmread_error() directly from inline assembly is partially broken
on 64-bit, and completely broken on 32-bit. On 64-bit, it will clobber
%rdi and %rsi (used to pass @field and @fault) and any volatile regs
written by vmread_error(). On 32-bit, asmlinkage means vmread_error()
expects the parameters to be passed on the stack, not via regs.
Opportunistically zero out the result in the trampoline to save a few
bytes of code for every VMREAD. A happy side effect of the trampoline
is that the inline code footprint is reduced by three bytes on 64-bit
due to PUSH/POP being more efficent (in terms of opcode bytes) than MOV.
Fixes: 87325d0729523 ("KVM: VMX: Add error handling to VMREAD helper") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200326160712.28803-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the result of __vmalloc() to avoid dereferencing a NULL pointer in
the event that allocation failres.
Fixes: b8ff20bdae867 ("kvm: Make VM ioctl do valloc for some archs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.
Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs(). This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.
Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel. Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.
Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration. list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new). A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.
In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR. Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().
Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.
Fixes: 02ad1f268b43 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-2-sean.j.christopherson@intel.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot. The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.
Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap. KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...
The disallow_lpage tracking is more subtle. Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.
Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().
Fixes: ce49ba315cdfd ("KVM: MMU: large page support") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.
We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".
Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.
Identified by manual code inspection.
Fixes: e0fab3009b8d ("KVM: s390: vsie: initial support for nested virtualization") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.
The can result in endless loops, e.g. when prefix cannot get mapped.
Fixes: b4453af3ac5b ("s390/mm: add shadow gmap support") Tested-by: Janosch Frank <frankja@linux.ibm.com> Reported-by: Janosch Frank <frankja@linux.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return true for vmx_interrupt_allowed() if the vCPU is in L2 and L1 has
external interrupt exiting enabled. IRQs are never blocked in hardware
if the CPU is in the guest (L2 from L1's perspective) when IRQs trigger
VM-Exit.
The new check percolates up to kvm_vcpu_ready_for_interrupt_injection()
and thus vcpu_run(), and so KVM will exit to userspace if userspace has
requested an interrupt window (to inject an IRQ into L1).
Remove the @external_intr param from vmx_check_nested_events(), which is
actually an indicator that userspace wants an interrupt window, e.g.
it's named @req_int_win further up the stack. Injecting a VM-Exit into
L1 to try and bounce out to L0 userspace is all kinds of broken and is
no longer necessary.
Remove the hack in nested_vmx_vmexit() that attempted to workaround the
breakage in vmx_check_nested_events() by only filling interrupt info if
there's an actual interrupt pending. The hack actually made things
worse because it caused KVM to _never_ fill interrupt info when the
LAPIC resides in userspace (kvm_cpu_has_interrupt() queries
interrupt.injected, which is always cleared by prepare_vmcs12() before
reaching the hack in nested_vmx_vmexit()).
Fixes: 7453fe1ddcc6 ("KVM: nVMX: Fix interrupt window request with "Acknowledge interrupt on exit"") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WMI method to set the charge threshold does not provide a
way to specific a battery, so we assume it is the first/primary
battery (by checking if the name is BAT0).
On some newer ASUS laptops (Zenbook UM431DA) though, the
primary/first battery isn't named BAT0 but BATT, so we need
to support that case.
Fixes: 31c20a88ccc4 ("platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API") Cc: stable@vger.kernel.org Signed-off-by: Kristian Klausen <kristian@klausen.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 4:
Model-Specific Registers" has the following table for the values from
freq_desc_byt:
Notice how for e.g the 83.3 MHz value there are 3 significant digits, which
translates to an accuracy of a 1000 ppm, where as a typical crystal
oscillator is 20 - 100 ppm, so the accuracy of the frequency format used in
the Software Developer’s Manual is not really helpful.
As far as we know Bay Trail SoCs use a 25 MHz crystal and Cherry Trail
uses a 19.2 MHz crystal, the crystal is the source clock for a root PLL
which outputs 1600 and 100 MHz. It is unclear if the root PLL outputs are
used directly by the CPU clock PLL or if there is another PLL in between.
This does not matter though, we can model the chain of PLLs as a single PLL
with a quotient equal to the quotients of all PLLs in the chain multiplied.
So we can create a simplified model of the CPU clock setup using a
reference clock of 100 MHz plus a quotient which gets us as close to the
frequency from the SDM as possible.
For the 83.3 MHz example from above this would give 100 MHz * 5 / 6 = 83
and 1/3 MHz, which matches exactly what has been measured on actual
hardware.
Use a simplified PLL model with a reference clock of 100 MHz for all Bay
and Cherry Trail models.
This fixes the time drifting by about 1 second per hour (20 - 30 seconds
per day) on (some) devices which rely on the tsc_msr.c code to determine
the TSC frequency.
Reported-by: Vipul Kumar <vipulk0511@gmail.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200223140610.59612-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the "Intel 64 and IA-32 Architectures Software Developer's
Manual Volume 4: Model-Specific Registers" on Cherry Trail (Airmont)
devices the 4 lowest bits of the MSR_FSB_FREQ mask indicate the bus freq
unlike on e.g. Bay Trail where only the lowest 3 bits are used.
This is also the reason why MAX_NUM_FREQS is defined as 9, since Cherry
Trail SoCs have 9 possible frequencies, so the lo value from the MSR needs
to be masked with 0x0f, not with 0x07 otherwise the 9th frequency will get
interpreted as the 1st.
Bump MAX_NUM_FREQS to 16 to avoid any possibility of addressing the array
out of bounds and makes the mask part of the cpufreq struct so it can be
set it per model.
While at it also log an error when the index points to an uninitialized
part of the freqs lookup-table.
Use named struct initializers for the freq_desc struct-s initialization
and change the "u8 msr_plat" to a "bool use_msr_plat" to make its meaning
more clear instead of relying on a comment to explain it.
Replace the 32bit exec_id with a 64bit exec_id to make it impossible
to wrap the exec_id counter. With care an attacker can cause exec_id
wrap and send arbitrary signals to a newly exec'd parent. This
bypasses the signal sending checks if the parent changes their
credentials during exec.
The severity of this problem can been seen that in my limited testing
of a 32bit exec_id it can take as little as 19s to exec 65536 times.
Which means that it can take as little as 14 days to wrap a 32bit
exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7
days. Even my slower timing is in the uptime of a typical server.
Which means self_exec_id is simply a speed bump today, and if exec
gets noticably faster self_exec_id won't even be a speed bump.
Extending self_exec_id to 64bits introduces a problem on 32bit
architectures where reading self_exec_id is no longer atomic and can
take two read instructions. Which means that is is possible to hit
a window where the read value of exec_id does not match the written
value. So with very lucky timing after this change this still
remains expoiltable.
I have updated the update of exec_id on exec to use WRITE_ONCE
and the read of exec_id in do_notify_parent to use READ_ONCE
to make it clear that there is no locking between these two
locations.
When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to
reconfigure HW's maximum txpower.
This fixes 0dBm txpower setting when user attaches to an interface for
the first time with the following scenario:
ieee80211_do_open()
ath9k_add_interface()
ath9k_set_txpower() /* Set TX power with not yet initialized
sc->hw->conf.power_level */
ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and
raise IEEE80211_CONF_CHANGE_POWER */
ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */
This issue can be reproduced with the following:
$ modprobe -r ath9k
$ modprobe ath9k
$ wpa_supplicant -i wlan0 -c /tmp/wpa.conf &
$ iw dev /* Here TX power is either 0 or 3 depending on RF chain */
$ killall wpa_supplicant
$ iw dev /* TX power goes back to calibrated value and subsequent
calls will be fine */
Fixes: 96682dfb3bb80 ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Skip wakeup_source_sysfs_remove() to fix a NULL pinter dereference via
ws->dev, if the wakeup source is unregistered before registering the
wakeup class from device_add().
Fixes: b0eb588a4af8 ("PM / wakeup: Register wakeup class kobj after device is added") Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
[ rjw: Subject & changelog, white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d5b7b6335d28 ("PM / Domains: Don't treat zero found compatible idle
states as an error"), moved of_genpd_parse_idle_states() towards allowing
none compatible idle state to be found for the device node, rather than
returning an error code.
However, it didn't consider that the "domain-idle-states" DT property may
be missing as it's optional, which makes of_count_phandle_with_args() to
return -ENOENT. Let's fix this to make the behaviour consistent.
Fixes: d5b7b6335d28 ("PM / Domains: Don't treat zero found compatible idle states as an error") Reported-by: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LDDIR/LDPTE is Loongson-3's acceleration for Page Table Walking. If BD
(Base Directory, the 4th page directory) is not enabled, then GDOffset
is biased by BadVAddr[63:62]. So, if GDOffset (aka. BadVAddr[47:36] for
Loongson-3) is big enough, "0b11(BadVAddr[63:62])|BadVAddr[47:36]|...."
can far beyond pg_swapper_dir. This means the pg_swapper_dir may NOT be
accessed by LDDIR correctly, so fix it by set PWDirExt in CP0_PWCtl.
In Aug 2018 NeilBrown noticed
commit 46cb04d471b6 ("fs/seq_file.c: simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed.
A simple demonstration is
dd if=/proc/swaps bs=1000 skip=1
Choose any block size larger than the size of /proc/swaps. This will
always show the whole last line of /proc/swaps"
/proc/swaps output was fixed recently, however there are lot of other
affected files, and one of them is related to pstore subsystem.
If .next function does not change position index, following .show function
will repeat output related to current position index.
There are at least 2 related problems:
- read after lseek beyond end of file, described above by NeilBrown
"dd if=<AFFECTED_FILE> bs=1000 skip=1" will generate whole last list
- read after lseek on in middle of last line will output expected rest of
last line but then repeat whole last line once again.
If .show() function generates multy-line output (like
pstore_ftrace_seq_show() does ?) following bash script cycles endlessly
We already checked this limit when the file was opened, and we keep it
open in the file table. Hence when we added unit_inflight to the count
we want to register, we're doubly accounting these files. This results
in -EMFILE for file registration, if we're at half the limit.
Clear its own IRQs before the parent IRQ get enabled, so that the
remaining IRQs do not accidentally interrupt the parent IRQ controller.
This patch also fixes a reboot bug on OX820 SoC, where the remaining
rps-timer IRQ raises a GIC interrupt that is left pending. After that,
the rps-timer IRQ is cleared during driver initialization, and there's
no IRQ left in rps-irq when local_irq_enable() is called, which evokes
an error message "unexpected IRQ trap".
Fixes: 35d25c5a609f ("irqchip: versatile FPGA: support cascaded interrupts from DT") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change to freeze_secondary_cpus() which added an early abort if a
wakeup is pending missed the fact that the function is also invoked for
shutdown, reboot and kexec via disable_nonboot_cpus().
In case of disable_nonboot_cpus() the wakeup event needs to be ignored as
the purpose is to terminate the currently running kernel.
Add a 'suspend' argument which is only set when the freeze is in context of
a suspend operation. If not set then an eventually pending wakeup event is
ignored.
Since commit f1cd10c55a40 ("KEYS: allow reaching the keys quotas exactly"),
we can reach max bytes/keys in key_alloc, but we forget to remove this
limit when we reserver space for payload in key_payload_reserve. So we
can only reach max keys but not max bytes when having delta between plen
and type->def_datalen. Remove this limit when instantiating the key, so we
can keep consistent with key_alloc.
Also, fix the similar problem in keyctl_chown_key().
Fixes: af9cfda53d9c ("keys: make the keyring quotas controllable through /proc/sys") Fixes: f1cd10c55a40 ("KEYS: allow reaching the keys quotas exactly") Cc: stable@vger.kernel.org # 5.0.x Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If .next function does not change position index,
following .show function will repeat output related
to current position index.
For /sys/kernel/security/tpm0/binary_bios_measurements:
1) read after lseek beyound end of file generates whole last line.
2) read after lseek to middle of last line generates
expected end of last line and unexpected whole last line once again.
If .next function does not change position index,
following .show function will repeat output related
to current position index.
In case of /sys/kernel/security/tpm0/ascii_bios_measurements
and binary_bios_measurements:
1) read after lseek beyound end of file generates whole last line.
2) read after lseek to middle of last line generates
expected end of last line and unexpected whole last line once again.
If a TPM is in disabled state, it's reasonable for it to have an empty
log. Bailing out of probe in this case means that the PPI interface
isn't available, so there's no way to then enable the TPM from the OS.
In general it seems reasonable to ignore log errors - they shouldn't
interfere with any other TPM functionality.
Signed-off-by: Matthew Garrett <matthewgarrett@google.com> Cc: stable@vger.kernel.org # 4.19.x Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a cfs rq is throttled, the latter and its child are removed from the
leaf list but their nr_running is not changed which includes staying higher
than 1. When a task is enqueued in this throttled branch, the cfs rqs must
be added back in order to ensure correct ordering in the list but this can
only happens if nr_running == 1.
When cfs bandwidth is used, we call unconditionnaly list_add_leaf_cfs_rq()
when enqueuing an entity to make sure that the complete branch will be
added.
Similarly unthrottle_cfs_rq() can stop adding cfs in the list when a parent
is throttled. Iterate the remaining entity to ensure that the complete
branch will be added in the list.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org #v5.1+ Link: https://lkml.kernel.org/r/20200306135257.25044-1-vincent.guittot@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci-epc-mem uses a bitmap to manage the Endpoint outbound (OB) address
region. This address region will be shared by multiple endpoint
functions (in the case of multi function endpoint) and it has to be
protected from concurrent access to avoid updating an inconsistent state.
Use a mutex to protect bitmap updates to prevent the memory
allocation API from returning incorrect addresses.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem being that this device is triggering boot interrupts
due to threaded interrupt handling and masking of the IO-APIC. These
boot interrupts are then forwarded on to the legacy PCH's PIRQ lines
where there is no handler present for the device.
Whenever a PCI device fires interrupt (INTx) to Pin 20 of IOAPIC 2
(GSI 44), the kernel receives two interrupts:
1. Interrupt from Pin 20 of IOAPIC 2 -> Expected
2. Interrupt from Pin 19 of IOAPIC 1 -> UNEXPECTED
Quirks for disabling boot interrupts (preferred) or rerouting the
handler exist but do not address these Xeon chipsets' mechanism:
https://lore.kernel.org/lkml/12131949181903-git-send-email-sassmann@suse.de/
Add a new mechanism via PCI CFG for those chipsets supporting CIPINTRC
register's dis_intx_rout2ich bit.
Link: https://lore.kernel.org/r/20200220192930.64820-2-sean.v.kelley@linux.intel.com Reported-by: Kar Hin Ong <kar.hin.ong@ni.com> Tested-by: Kar Hin Ong <kar.hin.ong@ni.com> Signed-off-by: Sean V Kelley <sean.v.kelley@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In pcie_config_aspm_l1ss(), we cleared the wrong bits when enabling ASPM L1
Substates. Instead of the L1.x enable bits (PCI_L1SS_CTL1_L1SS_MASK, 0xf), we
cleared the Link Activation Interrupt Enable bit (PCI_L1SS_CAP_L1_PM_SS,
0x10).
Clear the L1.x enable bits before writing the new L1.x configuration.
David Hoyer reports that powering pciehp slots up or down via sysfs may
hang: The call to wait_event() in pciehp_sysfs_enable_slot() and
_disable_slot() does not return because ctrl->ist_running remains true.
This flag, which was introduced by commit 1fc0693f796c ("PCI: pciehp: Avoid
returning prematurely from sysfs requests"), signifies that the IRQ thread
pciehp_ist() is running. It is set to true at the top of pciehp_ist() and
reset to false at the end. However there are two additional return
statements in pciehp_ist() before which the commit neglected to reset the
flag to false and wake up waiters for the flag.
That omission opens up the following race when powering up the slot:
* pciehp_ist() runs because a PCI_EXP_SLTSTA_PDC event was requested
by pciehp_sysfs_enable_slot()
* pciehp_ist() turns on slot power via the following call stack:
pciehp_handle_presence_or_link_change() -> pciehp_enable_slot() ->
__pciehp_enable_slot() -> board_added() -> pciehp_power_on_slot()
* after slot power is turned on, the link comes up, resulting in a
PCI_EXP_SLTSTA_DLLSC event
* the IRQ handler pciehp_isr() stores the event in ctrl->pending_events
and returns IRQ_WAKE_THREAD
* the IRQ thread is already woken (it's bringing up the slot), but the
genirq code remembers to re-run the IRQ thread after it has finished
(such that it can deal with the new event) by setting IRQTF_RUNTHREAD
via __handle_irq_event_percpu() -> __irq_wake_thread()
* the IRQ thread removes PCI_EXP_SLTSTA_DLLSC from ctrl->pending_events
via board_added() -> pciehp_check_link_status() in order to deal with
presence and link flaps per commit 7b45a5219d22 ("PCI: pciehp:
Tolerate initially unstable link")
* after pciehp_ist() has successfully brought up the slot, it resets
ctrl->ist_running to false and wakes up the sysfs requester
* the genirq code re-runs pciehp_ist(), which sets ctrl->ist_running
to true but then returns with IRQ_NONE because ctrl->pending_events
is empty
* pciehp_sysfs_enable_slot() is finally woken but notices that
ctrl->ist_running is true, hence continues waiting
The only way to get the hung task going again is to trigger a hotplug
event which brings down the slot, e.g. by yanking out the card.
The same race exists when powering down the slot because remove_board()
likewise clears link or presence changes in ctrl->pending_events per commit 2215a4f89759 ("PCI: pciehp: Ignore Link State Changes after powering off a
slot") and thereby may cause a re-run of pciehp_ist() which returns with
IRQ_NONE without resetting ctrl->ist_running to false.
Fix by adding a goto label before the teardown steps at the end of
pciehp_ist() and jumping to that label from the two return statements which
currently neglect to reset the ctrl->ist_running flag.
When booting with SME active, EFI tables must be mapped unencrypted since
they were built by UEFI in unencrypted memory. Update the list of tables
to be checked during early_memremap() processing to account for the EFI
TPM tables.
This fixes a bug where an EFI TPM log table has been created by UEFI, but
it lives in memory that has been marked as usable rather than reserved.
The original patch was to resolve the lldd being able to be unloaded
while being used to talk to the boot device of the system. However, the
end result of the original patch is that any driver unload while a nvme
controller is live via the lldd is now being prohibited. Given the module
reference, the module teardown routine can't be called, thus there's no
way, other than manual actions to terminate the controllers.
Fixes: 111402e08e68 ("nvme_fc: add module to ops template to allow module references") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DEVFREQ_THERMAL is disabled all functions except
of_devfreq_cooling_register_power() were already inlined. Also inline
the last function to avoid compile errors when multiple drivers call
of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not
set. Compilation failed with the following message:
multiple definition of `of_devfreq_cooling_register_power'
(which then lists all usages of of_devfreq_cooling_register_power())
Thomas Zimmermann reported this problem [0] on a kernel config with
CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and
CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers
gained devfreq cooling support.
The check for any active GPEs added by commit b9a2789137f0 ("ACPI:
PM: s2idle: Prevent spurious SCIs from waking up the system") turns
out to be insufficiently precise to prevent some systems from
resuming prematurely due to a spurious EC wakeup, so refine it
by first checking if any GPEs other than the EC GPE are active
and skipping all of the SCIs coming from the EC that do not produce
any genuine wakeup events after processing.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629 Fixes: b9a2789137f0 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-by: Ondřej Caletka <ondrej@caletka.cz> Tested-by: Ondřej Caletka <ondrej@caletka.cz> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check carried out by acpi_any_gpe_status_set() is not precise enough
for the suspend-to-idle implementation in Linux and in some cases it is
necessary make it skip one GPE (specifically, the EC GPE) from the check
to prevent a race condition leading to a premature system resume from
occurring.
For this reason, redefine acpi_any_gpe_status_set() to take the number
of a GPE to skip as an argument.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629 Tested-by: Ondřej Caletka <ondrej@caletka.cz> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.
The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Executing the seccomp_bpf testsuite under a 64-bit kernel with 32-bit
userland (both s390 and x86) doesn't work because there's no compat_ioctl
handler defined. Add the handler.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Fixes: 6a02b13b4538 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200310123332.42255-1-svens@linux.ibm.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the switch to use v4l2_async_notifier_add_subdev() and
v4l2_async_notifier_cleanup(), unloading the ti_cal module would cause a
kernel oops.
This was root cause to the fact that v4l2_async_notifier_cleanup() tries
to kfree the asd pointer passed into v4l2_async_notifier_add_subdev().
In our case the asd reference was from a statically allocated struct.
So in effect v4l2_async_notifier_cleanup() was trying to free a pointer
that was not kalloc.
So here we switch to using a kzalloc struct instead of a static one.
To achieve this we re-order some of the calls to prevent asd allocation
from leaking.
Fixes: 3c1618f649dd ("media: platform: Switch to v4l2_async_notifier_add_subdev") Cc: stable@vger.kernel.org Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since (luma/chroma)_qtable is an array of unsigned char, indexing it
returns consecutive byte locations, but we are supposed to read the arrays
in four-byte words. Consequently, we should be pointing
get_unaligned_be32() at consecutive word locations instead.
With the latest cleanup in qcom scm driver the secure monitor
call for setting the remote processor state returns EINVAL when
it is called for the first time and after another scm call
auth_and_reset. The error returned from scm call could be ignored
because the state transition is already done in auth_and_reset.
MSI GL63 laptop requires the similar quirk like other MSI models,
ALC1220_FIXUP_CLEVO_P950. The board BIOS doesn't provide a PCI SSID
for the device, hence we need to take the codec SSID (1462:1275)
instead.
The audio setup on the Lenovo Carbon X1 8th gen is the same as that on
the Lenovo Carbon X1 7th gen, as such it needs the same
ALC285_FIXUP_THINKPAD_HEADSET_JACK quirk.
This fixes volume control of the speaker not working among other things.
patch_realtek.c has historically failed to properly configure the PC
Beep Hidden Register for the ALC256 codec (among others). Depending on
your kernel version, symptoms of this misconfiguration can range from
chassis noise, picked up by a poorly-shielded PCBEEP trace, getting
amplified and played on your internal speaker and/or headphones to loud
feedback, which responds to the "Headphone Mic Boost" ALSA control,
getting played through your headphones. For details of the problem, see
the patch in this series titled "ALSA: hda/realtek - Set principled PC
Beep configuration for ALC256", which fixes the configuration.
These symptoms have been most noticed on the Dell XPS 13 9350 and 9360,
popular laptops that use the ALC256. As a result, several model-specific
fixups have been introduced to try and fix the problem, the most
egregious of which locks the "Headphone Mic Boost" control as a hack to
minimize noise from a feedback loop that shouldn't have been there in
the first place.
Now that the underlying issue has been fixed, remove all these fixups.
Remaining fixups needed by the XPS 13 are all picked up by existing pin
quirks.
This change should, for the XPS 13 9350/9360
- Significantly increase volume and audio quality on headphones
- Eliminate headphone popping on suspend/resume
- Allow "Headphone Mic Boost" to be set again, making the headphone
jack fully usable as a microphone jack too.
Fixes: aade5084eca6 ("ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3") Fixes: 0455873e3300 ("ALSA: hda - Fix headphone noise on Dell XPS 13 9360") Fixes: 2694525e9753 ("ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant") Fixes: bbff615f874b ("ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360") Cc: stable@vger.kernel.org Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Link: https://lore.kernel.org/r/b649a00edfde150cf6eebbb4390e15e0c2deb39a.1585584498.git.tommyhebb@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:
In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit 10e8e69cccb7 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.
Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].
This change eliminates the update in alc256_init() and replaces it with
the 0x5757 write from alc_fill_eapd_coef(). Kailang says that 0x5757 is
supposed to be the codec's default value, so using it will make
debugging easier for Realtek.
Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.
[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst
[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.
This codec (among others) has a hidden set of audio routes, apparently
designed to allow PC Beep output without a mixer widget on the output
path, which are controlled by an undocumented Realtek vendor register.
The default configuration of these routes means that certain inputs
aren't accessible, necessitating driver control of the register.
However, Realtek has provided no documentation of the register, instead
opting to fix issues by providing magic numbers, most of which have been
at least somewhat erroneous. These magic numbers then get copied by
others into model-specific fixups, leading to a fragmented and buggy set
of configurations.
To get out of this situation, I've reverse engineered the register by
flipping bits and observing how the codec's behavior changes. This
commit documents my findings. It does not change any code.
On the Lenovo X1C7 machines, after we plug the headset, the rt_resume()
and rt_suspend() of the codec driver will be called periodically, the
driver can't stay in the rt_suspend state even users doen't use the
sound card.
Through debugging, I found when running rt_suspend(), it will call
alc225_shutup(), in this function, it will change 3k pull down control
by alc_update_coef_idx(codec, 0x4a, 0, 3 << 10), this will trigger a
fake key event and that event will resume the codec, when codec
suspend agin, it will trigger the fake key event one more time, this
process will repeat.
If disable the key event before changing the pull down control, it
will not trigger fake key event. It also needs to restore the pull
down control and re-enable the key event, otherwise the system can't
get key event when codec is in rt_suspend state.
Also move some functions ahead of alc225_shutup(), this can save the
function declaration.
The recent fix for the OOB access in PCM OSS plugins (commit 5028daa3ed6b: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications. The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.
This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.
The access to Analog Capture Source control value implemented in
prodigy_hifi.c is wrong, as caught by the recently introduced sanity
check; it should be accessing value.enumerated.item[] instead of
value.integer.value[]. This patch corrects the wrong access pattern.
The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo. This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.
This patch corrects the behavior to store only on the defined array
member.
The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.
This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry. As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40
Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio. The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.
As a workaround, simply ignore this node by adding a usbmix_name_map
table entry. The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40
Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.
Cc: stable@vger.kernel.org Fixes: 3349f588ef24 ("usb: gadget: the start of the configfs interface") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.
soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.
If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.
We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.
This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree
if (key.objectid == key.offset) {
/*
* Only root blocks of reloc trees use backref
* pointing to itself.
*/
root = find_reloc_root(rc, cur->bytenr);
ASSERT(root);
cur->root = root;
break;
}
find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).
Fix this by using the commit_root->start bytenr for indexing the commit
root. Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.
This fixes the panic I was seeing when we started throttling relocation
for delayed refs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two bugs here, but fixing them independently would just result
in pain if you happened to bisect between the two patches.
First is how we handle the -EAGAIN from relocate_tree_block(). We don't
set error, unless we happen to be the first node, which makes no sense,
I have no idea what the code was trying to accomplish here.
We in fact _do_ want err set here so that we know we need to restart in
relocate_block_group(). Also we need finish_pending_nodes() to not
actually call link_to_upper(), because we didn't actually relocate the
block.
And then if we do get -EAGAIN we do not want to set our backref cache
last_trans to the one before ours. This would force us to update our
backref cache if we didn't cross transaction ids, which would mean we'd
have some nodes updated to their new_bytenr, but still able to find
their old bytenr because we're searching the same commit root as the
last time we went through relocate_tree_blocks.
Fixing these two things keeps us from panicing when we start breaking
out of relocate_tree_blocks() either for delayed ref flushing or enospc.
Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().
At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.
However this only happens if we successfully start a transaction. If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.
This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point. The reloc
control will be free'd and the rb tree is no longer used.
There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.
IMO this is the cleaner solution. I started with handling the error in
prepare_to_merge(), but it turned out super ugly. And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case. So I've opted to just remove it and add a comment where it was.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
btrfs_qgroup_rescan_worker is never queued, thus no one is going to wake
up close_ctree() and we get a deadlock.
All involved qgroup_rescan_init() callers are:
- btrfs_qgroup_rescan()
The example above. It's possible to trigger the deadlock when error
happened.
- btrfs_quota_enable()
Not possible. Just after qgroup_rescan_init() we queue the work.
- btrfs_read_qgroup_config()
It's possible to trigger the deadlock. It only init the work, the
work queueing happens in btrfs_qgroup_rescan_resume().
Thus if error happened in between, deadlock is possible.
We shouldn't set fs_info->qgroup_rescan_running just in
qgroup_rescan_init(), as at that stage we haven't yet queued qgroup
rescan worker to run.
[FIX]
Set qgroup_rescan_running before queueing the work, so that we ensure
the rescan work is queued when we wait for it.
Fixes: d2bd7dcd7ca0 ("Btrfs: fix qgroup rescan worker initialization") Signed-off-by: Jeff Mahoney <jeffm@suse.com>
[ Change subject and cause analyse, use a smaller fix ] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.
In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.
KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667] dump_backtrace+0x0/0x310
[13058.354672] show_stack+0x28/0x38
[13058.354681] dump_stack+0xd8/0x108
[13058.354687] print_address_description+0x68/0x2d0
[13058.354690] kasan_report+0x124/0x2e0
[13058.354697] __asan_load8+0x88/0xb0
[13058.354702] bfq_idle_slice_timer+0xac/0x290
[13058.354707] __hrtimer_run_queues+0x298/0x8b8
[13058.354710] hrtimer_interrupt+0x1b8/0x678
[13058.354716] arch_timer_handler_phys+0x4c/0x78
[13058.354722] handle_percpu_devid_irq+0xf0/0x558
[13058.354731] generic_handle_irq+0x50/0x70
[13058.354735] __handle_domain_irq+0x94/0x110
[13058.354739] gic_handle_irq+0x8c/0x1b0
[13058.354742] el1_irq+0xb8/0x140
[13058.354748] do_wp_page+0x260/0xe28
[13058.354752] __handle_mm_fault+0x8ec/0x9b0
[13058.354756] handle_mm_fault+0x280/0x460
[13058.354762] do_page_fault+0x3ec/0x890
[13058.354765] do_mem_abort+0xc0/0x1b0
[13058.354768] el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780] kasan_kmalloc+0xe0/0x190
[13058.354784] kasan_slab_alloc+0x14/0x20
[13058.354788] kmem_cache_alloc_node+0x130/0x440
[13058.354793] bfq_get_queue+0x138/0x858
[13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801] bfq_init_rq+0x1f4/0x1180
[13058.354806] bfq_insert_requests+0x264/0x1c98
[13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826] blk_flush_plug_list+0x230/0x548
[13058.354830] blk_finish_plug+0x60/0x80
[13058.354838] read_pages+0xec/0x2c0
[13058.354842] __do_page_cache_readahead+0x374/0x438
[13058.354846] ondemand_readahead+0x24c/0x6b0
[13058.354851] page_cache_sync_readahead+0x17c/0x2f8
[13058.354858] generic_file_buffered_read+0x588/0xc58
[13058.354862] generic_file_read_iter+0x1b4/0x278
[13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972] __vfs_read+0x238/0x320
[13058.354976] vfs_read+0xbc/0x1c0
[13058.354980] ksys_read+0xdc/0x1b8
[13058.354984] __arm64_sys_read+0x50/0x60
[13058.354990] el0_svc_common+0xb4/0x1d8
[13058.354994] el0_svc_handler+0x50/0xa8
[13058.354998] el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007] __kasan_slab_free+0x120/0x228
[13058.355010] kasan_slab_free+0x10/0x18
[13058.355014] kmem_cache_free+0x288/0x3f0
[13058.355018] bfq_put_queue+0x134/0x208
[13058.355022] bfq_exit_icq_bfqq+0x164/0x348
[13058.355026] bfq_exit_icq+0x28/0x40
[13058.355030] ioc_exit_icq+0xa0/0x150
[13058.355035] put_io_context_active+0x250/0x438
[13058.355038] exit_io_context+0xd0/0x138
[13058.355045] do_exit+0x734/0xc58
[13058.355050] do_group_exit+0x78/0x220
[13058.355054] __wake_up_parent+0x0/0x50
[13058.355058] el0_svc_common+0xb4/0x1d8
[13058.355062] el0_svc_handler+0x50/0xa8
[13058.355066] el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100ffff7e80b53b1408ffffa02d730c1c90ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0000000000037002300000001ffffffff0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808] ^
[13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint
Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.
Fixes: 35bf7cdf2 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Acked-by: Paolo Valente <paolo.valente@linaro.org> Reported-by: Wang Wang <wangwang2@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.
Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()
Currently the driver puts the process in interruptible sleep waiting for
the interrupt train to finish transfer to/from the tx_buf and rx_buf.
But exiting the process with ctrl-c may make the kernel panic: the
wait_event_interruptible call will return -ERESTARTSYS, which a proper
driver implementation is perhaps supposed to handle, but nonetheless
this one doesn't, and aborts the transfer altogether.
Actually when the task is interrupted, there is still a high chance that
the dspi_interrupt is still triggering. And if dspi_transfer_one_message
returns execution all the way to the spi_device driver, that can free
the spi_message and spi_transfer structures, leaving the interrupts to
access a freed tx_buf and rx_buf.
So it is clear that the "interruptible" part isn't handled correctly.
When the process receives a signal, one could either attempt a clean
abort (which appears to be difficult with this hardware) or just keep
restarting the sleep until the wait queue really completes. But checking
in a loop for -ERESTARTSYS is a bit too complicated for this driver, so
just make the sleep uninterruptible, to avoid all that nonsense.
The wait queue was actually restructured as a completion, after polling
other drivers for the most "popular" approach.
Fixes: a0de3694f2a3 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform") Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20200318001603.9650-7-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fw_sysfs_wait_timeout may return err with -ENOENT
at fw_load_sysfs_fallback and firmware is already
in abort status, no need to abort again, so skip it.
This issue is caused by concurrent situation like below:
when thread 1# wait firmware loading, thread 2# may write
-1 to abort loading and wakeup thread 1# before it timeout.
so wait_for_completion_killable_timeout of thread 1# would
return remaining time which is != 0 with fw_st->status
FW_STATUS_ABORTED.And the results would be converted into
err -ENOENT in __fw_state_wait_common and transfered to
fw_load_sysfs_fallback in thread 1#.
The -ENOENT means firmware status is already at ABORTED,
so fw_load_sysfs_fallback no need to get mutex to abort again.
-----------------------------
thread 1#,wait for loading
fw_load_sysfs_fallback
->fw_sysfs_wait_timeout
->__fw_state_wait_common
->wait_for_completion_killable_timeout
in __fw_state_wait_common,
...
93 ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout);
94 if (ret != 0 && fw_st->status == FW_STATUS_ABORTED)
95 return -ENOENT;
96 if (!ret)
97 return -ETIMEDOUT;
98
99 return ret < 0 ? ret : 0;
-----------------------------
thread 2#, write -1 to abort loading
firmware_loading_store
->fw_load_abort
->__fw_load_abort
->fw_state_aborted
->__fw_state_set
->complete_all
in __fw_state_set,
...
111 if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED)
112 complete_all(&fw_st->completion);
-------------------------------------------
BTW,the double abort issue would not cause kernel panic or create an issue,
but slow down it sometimes.The change is just a minor optimization.
Don't call quiesce(1) and quiesce(0) if array is already suspended,
otherwise in level_store, the array is writable after mddev_detach
in below part though the intention is to make array writable after
resume.
This is happening because we have a pending doorbell that requires
retrigger. As SW retriggering is done in a tasklet, we trigger the
circular dependency above.
The easy cop-out is to provide a retrigger callback that doesn't
require acquiring any extra lock.
In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"
Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.
CC: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
From the measured hardware signal, OV5695 reset pin goes high for a
short period of time during boot-up. From the sensor specification, the
reset pin is active low and the DT binding defines the pin as active
low, which means that the values set by the driver are inverted and thus
the value requested in probe ends up high.
Fix it by changing probe to request the reset GPIO initialized to high,
which makes the initial state of the physical signal low.
In addition, DOVDD rising must occur before DVDD rising from spec., but
regulator_bulk_enable() API enables all the regulators asynchronously.
Use an explicit loops of regulator_enable() instead.
For power off sequence, it is required that DVDD falls first. Given the
bulk API does not give any guarantee about the order of regulators,
change the driver to use regulator_disable() instead.
The sensor also requires a delay between reset high and first I2C
transaction, which was assumed to be 8192 XVCLK cycles, but 1ms is
recommended by the vendor. Fix this as well.
There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.
context#1: context#2:
ioc_release_fn() __ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock); ->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
->list_del_init(&icq->q_node);
->call_rcu(&icq->__rcu_head,
icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
->ioc_destroy_icq(icq);
->hlist_del_init(&icq->ioc_node);
This results into below crash as this memory
is now used by icq->__rcu_head in context#1.
There is a chance that icq could be free'd
as well.
Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Co-developed-by: Pradeep P V K <ppvk@codeaurora.org> Signed-off-by: Pradeep P V K <ppvk@codeaurora.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
irq_domain_alloc_irqs_hierarchy() has 3 call sites in the compilation unit
but only one of them checks for the pointer which is being dereferenced
inside the called function. Move the check into the function. This allows
for catching the error instead of the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at gpiochip_hierarchy_irq_domain_alloc+0x11f/0x140
...
[<c06c23ff>] (gpiochip_hierarchy_irq_domain_alloc)
[<c0462a89>] (__irq_domain_alloc_irqs)
[<c0462dad>] (irq_create_fwspec_mapping)
[<c06c2251>] (gpiochip_to_irq)
[<c06c1c9b>] (gpiod_to_irq)
[<bf973073>] (gpio_irqs_init [gpio_irqs])
[<bf974048>] (gpio_irqs_exit+0xecc/0xe84 [gpio_irqs])
Code: bad PC value
3cf50cdd26840550 ("efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures")
moved the call to efi_memattr_init() from ARM specific to the generic
EFI init code, in order to be able to apply the restricted permissions
described in that table on x86 as well.
We never enabled this feature fully on i386, and so mapping and
reserving this table is pointless. However, due to the early call to
memblock_reserve(), the memory bookkeeping gets confused to the point
where it produces the splat below when we try to map the memory later
on:
Let's work around this by disregarding the memory attributes table
altogether on i386, which does not result in a loss of functionality
or protection, given that we never consumed the contents.
Before this patch, run_queue would demote glocks based on whether
there are any more holders. But if the glock has pending revokes that
haven't been written to the media, giving up the glock might end in
file system corruption if the revokes never get written due to
io errors, node crashes and fences, etc. In that case, another node
will replay the metadata blocks associated with the glock, but
because the revoke was never written, it could replay that block
even though the glock had since been granted to another node who
might have made changes.
This patch changes the logic in run_queue so that it never demotes
a glock until its count of pending revokes reaches zero.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before this patch, if gfs2_ail_empty_gl saw there was nothing on
the ail list, it would return and not flush the log. The problem
is that there could still be a revoke for the rgrp sitting on the
sd_log_le_revoke list that's been recently taken off the ail list.
But that revoke still needs to be written, and the rgrp_go_inval
still needs to call log_flush_wait to ensure the revokes are all
properly written to the journal before we relinquish control of
the glock to another node. If we give the glock to another node
before we have this knowledge, the node might crash and its journal
replayed, in which case the missing revoke would allow the journal
replay to replay the rgrp over top of the rgrp we already gave to
another node, thus overwriting its changes and corrupting the
file system.
This patch makes gfs2_ail_empty_gl still call gfs2_log_flush rather
than returning.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a potential mem leak when pstore_init_fs failed,
since the pstore compression maybe unlikey to initialized
successfully. We must clean up the allocation once this
unlikey issue happens.
There is also refcount issue, as well:
WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170
The issue is that we make an erroneous extra call to scsi_host_put()
for that host:
So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup
a device release method - ata_devres_release() - which intends to release
the SCSI hosts:
static void ata_devres_release(struct device *gendev, void *res)
{
...
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (!ap)
continue;
if (ap->scsi_host)
scsi_host_put(ap->scsi_host);
}
...
}
However in the ata_scsi_add_hosts() error path, we also call
scsi_host_put() for the SCSI hosts.
Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and
leave this to ata_devres_release().
Fixes: 01daaa70b046 ("libata: separate out ata_host_alloc() and ata_host_register()") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C
as builtin. This is due to 'imply hwmon' in the respective Kconfig.
Issue build log:
ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init':
video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info
Cc: rdunlap@infradead.org Fixes: 2c3ecae972ee (media: video-i2c: add hwmon support for amg88xx) Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 34ca992f5c2a ("block, bfq: get extra ref to prevent a queue
from being freed during a group move") gets an extra reference to a
bfq_queue before possibly deactivating it (temporarily), in
bfq_bfqq_move(). This prevents the bfq_queue from disappearing before
being reactivated in its new group.
Yet, the bfq_queue may also be expired (i.e., its service may be
stopped) before the bfq_queue is deactivated. And also an expiration
may lead to a premature freeing. This commit fixes this issue by
simply moving forward the getting of the extra reference already
introduced by commit 34ca992f5c2a ("block, bfq: get extra ref to
prevent a queue from being freed during a group move").
projects / kernel.git / log