The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.
On a 32-bit kernel, the upper bits of userspace addresses passed via
various ioctls are silently ignored by the nvme driver.
However on a 64-bit kernel running a compat task, these upper bits are
not ignored and are in fact required to be zero for the ioctls to work.
Unfortunately, this difference matters. 32-bit smartctl submits the
NVME_IOCTL_ADMIN_CMD ioctl with garbage in these upper bits because it
seems the pointer value it puts into the nvme_passthru_cmd structure is
sign extended. This works fine on 32-bit kernels but fails on a 64-bit
one because (at least on my setup) the addresses smartctl uses are
consistently above 2G. For example:
# smartctl -x /dev/nvme0n1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.11] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Bad address
Since changing 32-bit kernels to actually check all of the submitted
address bits now would break existing userspace, this patch fixes the
compat problem by explicitly zeroing the upper bits in the compat case.
This enables 32-bit smartctl to work on a 64-bit kernel.
Signed-off-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
MCE handling on pSeries platform fails as recent rework to use common
code for pSeries and PowerNV in machine check error handling tries to
access per-cpu variables in realmode. The per-cpu variables may be
outside the RMO region on pSeries platform and needs translation to be
enabled for access. Just moving these per-cpu variable into RMO region
did'nt help because we queue some work to workqueues in real mode, which
again tries to touch per-cpu variables. Also fwnmi_release_errinfo()
cannot be called when translation is not enabled.
This patch fixes this by enabling translation in the exception handler
when all required real mode handling is done. This change only affects
the pSeries platform.
Without this fix below kernel crash is seen on injecting
SLB multihit:
That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.
The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.
The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).
Fixes: 3b07c5ecfcc6 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If the backing device for a loop device is itself a block device,
then mirror the "write zeroes" capabilities of the underlying
block device into the loop device. Copy this capability into both
max_write_zeroes_sectors and max_discard_sectors of the loop device.
The reason for this is that REQ_OP_DISCARD on a loop device translates
into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
presents a consistent interface for loop devices (that discarded data
is zeroed), regardless of the backing device type of the loop device.
There should be no behavior change for loop devices backed by regular
files.
This change fixes blktest block/003, and removes an extraneous
error print in block/013 when testing on a loop device backed
by a block device that does not support discard.
Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[used updated version of Evan's comment in loop_config_discard()]
[moved backingq to local scope, removed redundant braces] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: d77319941523 ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com> Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
You can build a user-space test program for the raid6 library code,
like this:
$ cd lib/raid6/test
$ make
The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)
Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)
This does not work on Ubuntu where /bin/sh is a symbolic link to dash.
I see lots of
/bin/sh: 1: Syntax error: Bad fd number
and
warning "your version of binutils lacks ... support"
Replace it with portable '>/dev/null 2>&1'.
Fixes: f3829f66cc2a ("lib/raid6: build proper files on corresponding arch") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
The upper 32-bit physical address gets truncated inadvertently
when dma_direct_get_required_mask() invokes phys_to_dma_direct().
This results in dma_addressing_limited() return incorrect value
when used in platforms with LPAE enabled.
Fix it here by explicitly type casting 'max_pfn' to phys_addr_t
in order to prevent overflow of intermediate value while evaluating
'(max_pfn - 1) << PAGE_SHIFT'.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
After v_total_min and max are updated in vrr structure, the changes are
not reflected in stream adjust. When these values are read from stream
adjust it does not reflect the actual state of the system.
[How]
Set stream adjust values equal to vrr adjust values after vrr adjust
values are updated.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device
(1) ns scanning triggers disk revalidation -> update disk info ->
freeze queue -> but blocked, due to (2)
(2) timeout handler reference the g_usage_counter - > but blocks in
the transport .timeout() handler, due to (3)
(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)
(4) ANA update takes the (down_write) namespaces_rwsem -> calls
nvme_mpath_set_live() -> which synchronize the ns_head srcu
(see commit 914527745435) -> but blocks, due to (5)
(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
direct_make_request > blk_queue_enter -> but blocked, due to (1)
==> the request queue is under freeze -> deadlock.
The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).
Fixes: 417eda0f497cb ("nvme: add ANA support") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.
When iscsid restart is complete, logout session reports error:
Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions
Make sure the unbind event is emitted.
[mkp: commit desc and applied by hand since patch was mangled]
We cannot look at blk_rq_payload_bytes without first checking
that the request has a mappable physical segments first (e.g.
blk_rq_nr_phys_segments(rq) != 0) and only then to take the
request payload bytes. This caused us to send a wrong sgl to
the target or even dereference a non-existing buffer in case
we actually got to the data send sequence (if it was in-capsule).
Reported-by: Tony Asleson <tasleson@redhat.com> Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should be disabled after the removal of the PWM
chip.
1. try_get_cap_refs() fails to get caps and finds that mds_wanted
does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
stale) already includes caps wanted by open file, so it skips
updating wanted caps.
Above events can cause an infinite loop inside ceph_get_caps().
Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.
During target side fault injections, it is possible to hit the
NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit
fixed a rebind and delete race condition, but called lpfc_nlp_put
unconditionally. This triggered a deletion and the crash.
Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp
will be being unregistered/removed. Leave the reference if the flag isn't
set.
Link: https://lore.kernel.org/r/20200322181304.37655-8-jsmart2021@gmail.com Fixes: f3aebbe79076 ("scsi: lpfc: Fix nvme remoteport registration race conditions") Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Injecting EEH on a 32GB card is causing kernel oops
The pci error handler is doing an IO flush and the offline code is also
doing an IO flush. When the 1st flush is complete the hdwq is destroyed
(freed), yet the second flush accesses the hdwq and crashes.
Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH
flag and the hdwq pointer to see if it is already set and not already
freed.
Link: https://lore.kernel.org/r/20200322181304.37655-6-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676
...
Call Trace:
dump_stack+0x96/0xe0
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
print_address_description.constprop.6+0x1b/0x220
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
__kasan_report.cold.9+0x37/0x7c
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
kasan_report+0xe/0x20
lpfc_unreg_login+0x7c/0xc0 [lpfc]
lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
...
When processing the completion of a "Reg Rpi" login mailbox command in
lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is
extracted from the completing mailbox context and passed as an input for
the next. However, the vpi stored in the mailbox command context is an
absolute vpi, which for SLI4 represents both base + offset. When used with
a non-zero base component, (function id > 0) this results in an
out-of-range access beyond the allocated phba->vpi_ids array.
Fix by subtracting the function's base value to get an accurate vpi number.
Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.
To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.
Clang reports a warning on the __tlbi(aside1is, 0) macro expansion since
the value size does not match the register size specified in the inline
asm. Construct the ASID value using the __TLBI_VADDR() macro.
Fixes: 4c991f371442 ("arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Compat user-space is unable to perform ICIMVAU instructions from
user-space. Instead it uses a compat-syscall. Add the workaround for
Neoverse-N1 #1542419 to this code path.
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Systems affected by Neoverse-N1 #1542419 support DIC so do not need to
perform icache maintenance once new instructions are cleaned to the PoU.
For the errata workaround, the kernel hides DIC from user-space, so that
the unnecessary cache maintenance can be trapped by firmware.
To reduce the number of traps, produce a fake IminLine value based on
PAGE_SIZE.
Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
when creating a new ipip interface with no local/remote configuration,
the lookup is done with TUNNEL_NO_KEY flag, making it impossible to
match the new interface (only possible match being fallback or metada
case interface); e.g: `ip link add tunl1 type ipip dev eth0`
To fix this case, adding a flag check before the key comparison so we
permit to match an interface with no local/remote config; it also avoids
breaking possible userland tools relying on TUNNEL_NO_KEY flag and
uninitialised key.
context being on my side, I'm creating an extra ipip interface attached
to the physical one, and moving it to a dedicated namespace.
Fixes: e7ccb3806ba4 ("GRE: Refactor GRE tunneling code.") Signed-off-by: William Dauchy <w.dauchy@criteo.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In f2fs_listxattr, there is no boundary check before
memcpy e_name to buffer.
If the e_name_len is corrupted,
unexpected memory contents may be returned to the buffer.
Signed-off-by: Randall Huang <huangrandall@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.
For the sake of the test_verifier, it is probably not needed here:
# ./test_verifier 101
#101/p bpf_get_stack return R0 within range OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
I haven't seen this issue in test_progs* though, they are passing fine:
Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.
The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.
With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],
After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.
Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.
Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.
Daniel Borkmann [Tue, 21 Apr 2020 13:01:49 +0000 (15:01 +0200)]
bpf: fix buggy r0 retval refinement for tracing helpers
[ no upstream commit ]
See the glory details in c96b5434bd98 ("bpf: Verifier, do_refine_retval_range
may clamp umin to 0 incorrectly") for why d055298bb70d ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") is buggy. The whole series however
is not suitable for stable since it adds significant amount [0] of verifier
complexity in order to add 32bit subreg tracking. Something simpler is needed.
Unfortunately, reverting d055298bb70d ("bpf/verifier: refine retval R0 state
for bpf_get_stack helper") or just cherry-picking c96b5434bd98 ("bpf: Verifier,
do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since
it will break existing tracing programs badly (at least those that are using
bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is
also not an option since on 4.19 kernels an error will cause a soft-lockup due
to hitting dead-code sanitized branch since we don't hard-wire such branches
in old kernels yet. But even then for 5.x d055298bb70d ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") would cause wrong bounds on the
verifier simluation when an error is hit.
In one of the earlier iterations of mentioned patch series for upstream there
was the concern that just using smax_value in do_refine_retval_range() would
nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1]
which eventually led to the 32bit subreg tracking in the first place. While I
initially went for implementing the idea [1] to pattern match the two shift
operations, it turned out to be more complex than actually needed, meaning, we
could simply treat do_refine_retval_range() similarly to how we branch off
verification for conditionals or under speculation, that is, pushing a new
reg state to the stack for later verification. This means, instead of verifying
the current path with the ret_reg in [S32MIN, msize_max_value] interval where
later bounds would get nuked, we split this into two: i) for the success case
where ret_reg can be in [0, msize_max_value], and ii) for the error case with
ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds
during these shift patterns and can match reg < 0 test. test_progs also succeed
with this approach.
One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.
That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,
1) The put_user() call is replaced by a direct copy.
2) The copy_to_user() call is replaced by memcpy().
3) All the fault handling code is removed.
Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.
This function is only called from lpddr_probe(). We free "lpddr" both
here and in the caller, so it's a double free. The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.
When writing the bad block marker to the OOB area the access mode
should be set to MTD_OPS_RAW as it is done for reading the marker.
Currently this only works because req.mode is initialized to
MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for
req.mode != MTD_OPS_AUTO_OOB.
Fix this by explicitly setting req.mode to MTD_OPS_RAW.
Fixes: 9d920af6b0c0 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.
And this turns out to be not only a day-zero bug, but entirely my
own fault. I hate it when that happens!
Fixes: f23b4274a5e7 ("locktorture: Add a lock-torture kernel module") Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ev_byte_channel_send() assumes that its third argument is a 16 byte
array. Some places where it is called it may not be (or we can't
easily tell if it is). Newer compilers have started producing warnings
about this, so make sure we actually pass a 16 byte array.
There may be more elegant solutions to this, but the driver is quite
old and hasn't been updated in many years.
The warnings (from a powerpc allyesconfig build) are:
In file included from include/linux/byteorder/big_endian.h:5,
from arch/powerpc/include/uapi/asm/byteorder.h:14,
from include/asm-generic/bitops/le.h:6,
from arch/powerpc/include/asm/bitops.h:250,
from include/linux/bitops.h:29,
from include/linux/kernel.h:12,
from include/asm-generic/bug.h:19,
from arch/powerpc/include/asm/bug.h:109,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/gfp.h:5,
from include/linux/slab.h:15,
from drivers/tty/ehv_bytechan.c:24:
drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’:
arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds]
298 | r6 = be32_to_cpu(p[1]);
include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’
40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
| ^
arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’
298 | r6 = be32_to_cpu(p[1]);
| ^~~~~~~~~~~
drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’
166 | static void ehv_bc_udbg_putc(char c)
| ^~~~~~~~~~~~~~~~
Fixes: 1a700e2d8bc9 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Trim warnings from change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
if (fb_logo.depth > 4 && depth > 4) {
^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
else
^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
return ret;
^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
if (!ret)
^
2 warnings generated.
This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.
The chip is configured in 24 bit mode. The values read from
it must always be treated as is. This fixes the issue by
replacing the previous 16 bits value by a 24 bits buffer.
This changes affects the value output by previous version of
the driver, since the least significant byte was missing.
The upper half of 16 bit values previously output are now
the upper half of a 24 bit value.
Fixes: e3a6fe60a567 ("iio: light: introduce si1133") Reported-by: Simon Goyette <simon.goyette@gmail.com> Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it. It depends
on the compiler. The solution is just to replace the assignment with an
memcpy().
Fixes: 294ef0c9e82d ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Peter Rosin <peda@axentia.se> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 2f50903bc269 ("dma-mapping: implement dma_map_single_attrs using
dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update
type2name string table. This causes incorrect displaying of dma allocation
type.
Fix it by removing "page" string from type2name string table and switch to
use named initializers.
Commit c76eede715b5 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.
The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.
Fixes: c76eede715b5 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.
The first tell-tale symptom of this issue is:
nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]
appearing in dmesg, likely followed by many other failures being logged.
Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race condition that we may miss to wait for all node pages
writeback, fix it.
- fsync() - shrink
- f2fs_do_sync_file
- __write_node_page
- set_page_writeback(page#0)
: remove DIRTY/TOWRITE flag
- f2fs_fsync_node_pages
: won't find page #0 as TOWRITE flag was removeD
- f2fs_wait_on_node_pages_writeback
: wont' wait page #0 writeback as it was not in fsync_node_list list.
- f2fs_add_fsync_node_entry
Fixes: f0efe3997d65 ("f2fs: fix to avoid broken of dnode block list") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Fixes: a0fbfcf660937 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "cmd" comes from the user and it can be up to 255. It it's more
than the number of bits in long, it results out of bounds read when we
check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is
ND_CMD_CALL (10) so I added a compare against that.
Fixes: 430ef3231e6d ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Intel Compute Stick `STK1A32SC` can have a system vendor of
"Intel(R) Client Systems".
Broaden the Intel Compute Stick DMI checks so that they match "Intel
Corporation" as well as "Intel(R) Client Systems".
This fixes an issue where the STK1A32SC compute sticks were still
exposing a battery with the existing blacklist entry.
Signed-off-by: Jeffery Miller <jmiller@neverware.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the
function csky_start_secondary() to the function .init.text:init_fpu()
The function csky_start_secondary() references
the function __init init_fpu().
This is often because csky_start_secondary lacks a __init
annotation or the annotation of init_fpu is wrong.
xdr_buf_read_mic() tries to find unused contiguous space in a
received xdr_buf in order to linearize the checksum for the call
to gss_verify_mic. However, the corner cases in this code are
numerous and we seem to keep missing them. I've just hit yet
another buffer overrun related to it.
This logic assumes the transport has set the length of the tail
based on the size of the received message. base + len is then
supposed to be off the end of the message but still within the
actual buffer.
In fact, the length of the tail is set by the upper layer when the
Call is encoded so that the end of the tail is actually the end of
the allocated buffer itself. This causes the logic above to set
mic->data to point past the end of the receive buffer.
The "mic->data = head" arm of this if statement is no less fragile.
As near as I can tell, this has been a problem forever. I'm not sure
that minimizing au_rslack recently changed this pathology much.
So instead, let's use a more straightforward approach: kmalloc a
separate buffer to linearize the checksum. This is similar to
how gss_validate() currently works.
Coming back to this code, I had some trouble understanding what
was going on. So I've cleaned up the variable naming and added
a few comments that point back to the XDR definition in RFC 2203
to help guide future spelunkers, including myself.
As an added clean up, the functionality that was in
xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(),
as that is its only caller.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When building without extra debugging, (and with another patch that uses
no_printk() instead of <empty> for the ext2-xattr debug-print macros,
this build error happens:
../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’:
../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in
this function); did you mean ‘ext2_xattr_list’?
atomic_read(&ext2_xattr_cache->c_entry_count));
Fix the problem by removing cached entry count from the debug message
since otherwise we'd have to export the mbcache structure just for that.
Fixes: 1c52481d1963 ("ext2: convert to mbcache2") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Intel VT-d might support PRS (Page Reqest Support) when it's
running in the scalable mode. Each page request descriptor
occupies 32 bytes and is 32-bytes aligned. The page request
descriptor offset mask should be 32-bytes aligned.
Fixes: 9231508b1e8e1 ("iommu/vt-d: Support page request in scalable mode") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read
side critical section but with dmar_global_lock held. Silence this
false positive.
drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!!
1 lock held by swapper/0/1:
#0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19
When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros
to use the no_printk() macro instead of <nothing>.
This fixes gcc warnings when -Wextra is used:
../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
I have verified that the only object code change (with gcc 7.5.0) is
the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.
Ever since commit f2dbea87fa6c ("SUNRPC: Use au_rslack when computing
reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It
used to use au_cslack value which was nice and large and changed it to
au_rslack value which turns out to be too small.
Since 5.1, v3 mount with sec=krb5p fails against an Ontap server
because client's receive buffer it too small.
For gss krb5p, we need to account for the mic token in the verifier,
and the wrap token in the wrap token.
RFC 4121 defines:
mic token
Octet no Name Description
--------------------------------------------------------------
0..1 TOK_ID Identification field. Tokens emitted by
GSS_GetMIC() contain the hex value 04 04
expressed in big-endian order in this
field.
2 Flags Attributes field, as described in section
4.2.2.
3..7 Filler Contains five octets of hex value FF.
8..15 SND_SEQ Sequence number field in clear text,
expressed in big-endian order.
16..last SGN_CKSUM Checksum of the "to-be-signed" data and
octet 0..15, as described in section 4.2.4.
that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum
wrap token
Octet no Name Description
--------------------------------------------------------------
0..1 TOK_ID Identification field. Tokens emitted by
GSS_Wrap() contain the hex value 05 04
expressed in big-endian order in this
field.
2 Flags Attributes field, as described in section
4.2.2.
3 Filler Contains the hex value FF.
4..5 EC Contains the "extra count" field, in big-
endian order as described in section 4.2.3.
6..7 RRC Contains the "right rotation count" in big-
endian order, as described in section
4.2.5.
8..15 SND_SEQ Sequence number field in clear text,
expressed in big-endian order.
16..last Data Encrypted data for Wrap tokens with
confidentiality, or plaintext data followed
by the checksum for Wrap tokens without
confidentiality, as described in section
4.2.4.
Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum
(other things like padding)
Move canonical address check before mmget_not_zero() to avoid mm
reference leak.
Fixes: 9dead11036cf ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.") Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling viommu_domain_free() on a domain that hasn't been finalised (not
attached to any device, for example) can currently cause an Oops,
because we attempt to call ida_free() on ID 0, which may either be
unallocated or used by another domain.
Only initialise the vdomain->viommu pointer, which denotes a finalised
domain, at the end of a successful viommu_domain_finalise().
Current mode validation impedes setting up some video modes which should
be supported otherwise. Namely 1920x1200@60Hz.
Fix this by lowering the minimum HDMI state machine clock to pixel clock
ratio allowed.
Fixes: 8b626665f6b4 ("drm/vc4: Reject HDMI modes with too high of clocks.") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
When building UML with glibc 2.17 installed, compilation
of arch/um/os-Linux/file.c fails due to failure to find
FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions.
It appears that /usr/include/bits/fcntl-linux.h (indirectly
included by /usr/include/fcntl.h) does not include falloc.h
with an older glibc, whereas a more up-to-date version
does.
Adding the direct include to file.c resolves the issue
and does not cause problems for more recent glibc.
Fixes: f3b4d6cdd27f ("um: Add support for DISCARD in the UBD Driver") Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.
Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.
But the real memory is no more than 1GB, there is a gap between the
end size of memory and border of 1GB. CPU could speculatively
execute to that gap and if the gap of the bus couldn't respond to
the CPU request, then the crash will happen.
Now make the setting with:
- SSEG0: PHY_START , PHY_START + 512MB (no change)
- SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB)
We also deprecated zhole_szie[] settings, it's only used by arm
style CPUs. All memory gap should use Reserved setting of dts in
csky system.
The warning message when a led is renamed due to name collition can fail
to show proper original name if init_data is used. Eg:
[ 9.073996] leds-gpio a0040000.leds_0: Led (null) renamed to red_led_1 due to name collision
Fixes: b5a664c1d42a ("leds: core: Add support for composing LED class device names") Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.
It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.
Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Mika Westerberg <mika.westerberg@intel.com> Cc: linux-pci@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.
We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.
Identified by manual code inspection. I don't think this classifies as
stable material.
Fixes: 02f026b3071c ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
compiletime_assert() uses __LINE__ to create a unique function name. This
means that if you have more than one BUILD_BUG_ON() in the same source
line (which can happen if they appear e.g. in a macro), then the error
message from the compiler might output the wrong condition.
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1
instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so
each BUILD_BUG_ON() gets a different function name and the correct
condition is printed:
./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Daniel Santos <daniel.santos@pobox.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
"vm_committed_as.count" could be accessed concurrently as reported by
KCSAN,
BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch
write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35:
percpu_counter_add_batch+0x83/0xd0
percpu_counter_add_batch at lib/percpu_counter.c:91
__vm_enough_memory+0xb9/0x260
dup_mm+0x3a4/0x8f0
copy_process+0x2458/0x3240
_do_fork+0xaa/0x9f0
__do_sys_clone+0x125/0x160
__x64_sys_clone+0x70/0x90
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19:
__vm_enough_memory+0x199/0x260
percpu_counter_read_positive at include/linux/percpu_counter.h:81
(inlined by) __vm_enough_memory at mm/util.c:839
mmap_region+0x1b2/0xa10
do_mmap+0x45c/0x700
vm_mmap_pgoff+0xc0/0x130
ksys_mmap_pgoff+0x6e/0x300
__x64_sys_mmap+0x33/0x40
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The read is outside percpu_counter::lock critical section which results in
a data race. Fix it by adding a READ_ONCE() in
percpu_counter_read_positive() which could also service as the existing
compiler memory barrier.
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor
CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the
condition (non_swap_entry(entry) && is_device_private_entry(entry)) in
zap_pte_range() will never be true even if the entry is a device private
one.
Equally any other code depending on non_swap_entry() will not function as
expected.
I originally spotted this just by looking at the code, I haven't actually
observed any problems.
Looking a bit more closely it appears that actually this situation
(currently at least) cannot occur:
DEVICE_PRIVATE depends on ZONE_DEVICE
ZONE_DEVICE depends on MEMORY_HOTREMOVE
MEMORY_HOTREMOVE depends on MIGRATION
Fixes: 1e1226c664dd ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When CONFIG_HUGETLB_PAGE is set but not CONFIG_HUGETLBFS, the following
build failure is encoutered:
In file included from arch/powerpc/mm/fault.c:33:0:
include/linux/hugetlb.h: In function 'hstate_inode':
include/linux/hugetlb.h:477:9: error: implicit declaration of function 'HUGETLBFS_SB' [-Werror=implicit-function-declaration]
return HUGETLBFS_SB(i->i_sb)->hstate;
^
include/linux/hugetlb.h:477:30: error: invalid type argument of '->' (have 'int')
return HUGETLBFS_SB(i->i_sb)->hstate;
^
Gate hstate_inode() with CONFIG_HUGETLBFS instead of CONFIG_HUGETLB_PAGE.
Fixes: 7972e50b6684 ("hugetlbfs: per mount huge page sizes") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Baoquan He <bhe@redhat.com> Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Adam Litke <agl@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Link: http://lkml.kernel.org/r/7e8c3a3c9a587b9cd8a2f146df32a421b961f3a2.1584432148.git.christophe.leroy@c-s.fr Link: https://patchwork.ozlabs.org/patch/1255548/#2386036 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When encryption is used, smb2_transform_hdr is defined on the stack and is
passed to the transport. This doesn't work with RDMA as the buffer needs to
be DMA'ed.
Fix it by using kmalloc.
Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the hypervisor side, when completing commands and the pipe is full,
we retry writing only the entries that failed, by offsetting
io_req_buffer, but we don't reduce the number of bytes written, which
can cause a buffer overrun of io_req_buffer, and write garbage to the
pipe.
Cc: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:
[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...
To avoid this, commit the error info in the superblock only if the
block device is writable.
When perf record -e SF_CYCLES_BASIC_DIAG runs with very high
frequency, the samples arrive faster than the perf process can
save them to file. Eventually, for longer running processes, this
leads to the siutation where the trace buffers allocated by perf
slowly fills up. At one point the auxiliary trace buffer is full
and the CPU Measurement sampling facility is turned off. Furthermore
a warning is printed to the kernel log buffer:
cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling
mode is full
The number of allocated pages for the auxiliary trace buffer is shown
as zero pages. That is wrong.
Fix this by saving the number of allocated pages before entering the
work loop in the interrupt handler. When the interrupt handler processes
the samples, it may detect the buffer full condition and stop sampling,
reducing the buffer size to zero.
Print the correct value in the error message:
cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling
mode is full
machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.
To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.
While we're here, remove some spaces before tabs.
Fixes: 4fe069b06755 ("edac: cpc925 MC platform device setup") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The "os-term" RTAS calls has one argument with a message address of OS
termination cause. rtas_os_term() already passes it but the recently
added prom_init's version of that missed it; it also does not fill
args correctly.
This passes the message address and initializes the number of arguments.
Fixes: cb8ee838245e ("powerpc/prom_init: Add the ESM call to prom_init") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200312074404.87293-1-aik@ozlabs.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
The space_info list is normally RCU protected and should be traversed
with rcu_read_lock held. There's a warning
[29.104756] WARNING: suspicious RCU usage
[29.105046] 5.6.0-rc4-next-20200305 #1 Not tainted
[29.105231] -----------------------------
[29.105401] fs/btrfs/block-group.c:2011 RCU-list traversed in non-reader section!!
pointing out that the locking is missing in btrfs_read_block_groups.
However this is not necessary as the list traversal happens at mount
time when there's no other thread potentially accessing the list.
To fix the warning and for consistency let's add the RCU lock/unlock,
the code won't be affected much as it's doing some lightweight
operations.
Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It turns out that there is one use case for programs being able to
write to swap devices, and that is the userspace hibernation code.
Quick fix: disable the S_SWAPFILE check if hibernation is configured.
Fixes: 11a2a23dcf0b ("vfs: don't allow writes to swap files") Reported-by: Domenico Andreoli <domenico.andreoli@linux.com> Reported-by: Marian Klein <mkleinsoft@gmail.com> Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add and set a new CP flag CP_RESIZEFS_FLAG during
online resize FS to help fsck fix the metadata mismatch
that may happen due to SPO during resize, where SB
got updated but CP data couldn't be written yet.
fsck errors -
Info: CKPT version = 6ed7bccb
Wrong user_block_count(2233856)
[f2fs_do_mount:3365] Checkpoint is polluted
Even though online resize is successfully done, a SPO immediately
after resize, still causes below error in the next mount.
[ 11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856
[ 11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint
This is because after FS metadata is updated in update_fs_metadata()
if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect
the new user_block_count.
When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().
However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.
projects / kernel.git / log