If you call listen() and accept() on an already connect()ed
AF_NETROM socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and nr_accept() dequeues
the skb waiting in the sk->sk_receive_queue.
As a result, nr_accept() allocates and returns a sock with
the sk of the parent AF_NETROM socket.
KASAN report by syzbot:
```
BUG: KASAN: use-after-free in nr_release+0x66/0x460 net/netrom/af_netrom.c:520
Write of size 4 at addr ffff8880235d8080 by task syz-executor564/5128
After commit 4f2a4111753a ("block, bfq: fix possible uaf for 'bfqq->bic'"),
bic->bfqq will be accessed in bic_set_bfqq(), however, in some context
bic->bfqq will be freed, and bic_set_bfqq() is called with the freed
bic->bfqq.
Fix the problem by always freeing bfqq after bic_set_bfqq().
Fixes: 4f2a4111753a ("block, bfq: fix possible uaf for 'bfqq->bic'") Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230130014136.591038-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
For PCI devices the Runtime PM refcount is incremented twice:
1. During device enumeration with a call to pm_runtime_forbid.
2. Just before a driver probe logic is called.
Because of that in order to enable Runtime PM on a given device
we have to call both pm_runtime_allow and pm_runtime_put_noidle,
once it's ready to be runtime suspended.
The former was missing causing the pm refcount to never reach 0.
Fixes: 6d882fcbe698 ("net: wwan: t7xx: Runtime PM") Signed-off-by: Kornel Dulęba <mindal@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe() function is only used for the DP83822 PHY, leaving the
private data pointer uninitialized for the smaller DP83825/26 models.
While all uses of the private data structure are hidden in 82822 specific
callbacks, configuring the interrupt is shared across all models.
This causes a NULL pointer dereference on the smaller PHYs as it accesses
the private data unchecked. Verifying the pointer avoids that.
Fixes: 88712048e2f5 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Andre Kalb <andre.kalb@sma.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/Y9FzniUhUtbaGKU7@pc6682 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent sfc NICs are TSO capable for some tunnel protocols. However, it
was not working properly because the feature was not advertised in
hw_enc_features, but in hw_features only.
Setting up a GENEVE tunnel and using iperf3 to send IPv4 and IPv6 traffic
to the tunnel show, with tcpdump, that the IPv4 packets still had ~64k
size but the IPv6 ones had only ~1500 bytes (they had been segmented by
software, not offloaded). With this patch segmentation is offloaded as
expected and the traffic is correctly received at the other end.
Fixes: 4abe535e631e ("sfc: advertise encapsulated offloads on EF10") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230125143513.25841-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
GSO should not merge page pool recycled frames with standard reference
counted frames. Traditionally this didn't occur, at least not often.
However as we start looking at adding support for wireless adapters there
becomes the potential to mix the two due to A-MSDU repartitioning frames in
the receive path. There are possibly other places where this may have
occurred however I suspect they must be few and far between as we have not
seen this issue until now.
Fixes: 1c55a919b1b6 ("page_pool: add frag page recycling support in page pool") Reported-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/167475990764.1934330.11960904198087757911.stgit@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
The PF controls the set of queues that the RDMA auxiliary_driver requests
resources from. The set_channel command will alter that pool and trigger a
reconfiguration of the VSI, which breaks RDMA functionality.
Prevent set_channel from executing when RDMA driver bound to auxiliary
device.
Adding a locked variable to pass down the call chain to avoid double
locking the device_lock.
Fixes: f7570832e233 ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
"""
Since "vhost/scsi: fix reuse of &vq->iov[out] in response"
we have this:
cmd->tvc_resp_iov = vq->iov[vc.out];
cmd->tvc_in_iovs = vc.in;
combined with
iov_iter_init(&iov_iter, ITER_DEST, &cmd->tvc_resp_iov,
cmd->tvc_in_iovs, sizeof(v_rsp));
in vhost_scsi_complete_cmd_work(). We used to have ->tvc_resp_iov
_pointing_ to vq->iov[vc.out]; back then iov_iter_init() asked to
set an iovec-backed iov_iter over the tail of vq->iov[], with
length being the amount of iovecs in the tail.
Now we have a copy of one element of that array. Fortunately, the members
following it in the containing structure are two non-NULL kernel pointers,
so copy_to_iter() will not copy anything beyond the first iovec - kernel
pointer is not (on the majority of architectures) going to be accepted by
access_ok() in copyout() and it won't be skipped since the "length" (in
reality - another non-NULL kernel pointer) won't be zero.
So it's not going to give a guest-to-qemu escalation, but it's definitely
a bug. Frankly, my preference would be to verify that the very first iovec
is long enough to hold rsp_size. Due to the above, any users that try to
give us vq->iov[vc.out].iov_len < sizeof(struct virtio_scsi_cmd_resp)
would currently get a failure in vhost_scsi_complete_cmd_work()
anyway.
"""
However, the spec doesn't say anything about the legacy descriptor
layout for the respone. So this patch tries to not assume the response
to reside in a single separate descriptor which is what commit 4976815214a5 ("vhost/scsi: Convert completion path to use") tries to
achieve towards to ANY_LAYOUT.
This is done by allocating and using dedicate resp iov in the
command. To be safety, start with UIO_MAXIOV to be consistent with the
limitation that we advertise to the vhost_get_vq_desc().
Testing with the hacked virtio-scsi driver that use 1 descriptor for 1
byte in the response.
Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Coddington <bcodding@redhat.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: be73630446c3 ("vhost/scsi: fix reuse of &vq->iov[out] in response") Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119073647.76467-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 983dbdfd3439 ("vhost-scsi: unbreak any layout for response") Signed-off-by: Sasha Levin <sashal@kernel.org>
When the vhost iotlb is used along with a guest virtual iommu
and the guest gets rebooted, some MISS messages may have been
recorded just before the reboot and spuriously executed by
the virtual iommu after the reboot.
As vhost does not have any explicit reset user API,
VHOST_NET_SET_BACKEND looks a reasonable point where to clear
the pending messages, in case the backend is removed.
Export vhost_clear_msg() and call it in vhost_net_set_backend()
when fd == -1.
Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Fixes: 89cd651c320dc ("vhost: new device IOTLB API")
Message-Id: <20230117151518.44725-3-eric.auger@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We change recently the memalloc helper to use
dma_alloc_noncontiguous() and the fallback to get_pages(). Although
lots of issues with IOMMU (or non-IOMMU) have been addressed, but
there seems still a regression on Xen PV. Interestingly, the only
proper way to work is use dma_alloc_coherent(). The use of
dma_alloc_coherent() for SG buffer was dropped as it's problematic on
IOMMU systems. OTOH, Xen PV has a different way, and it's fine to use
the dma_alloc_coherent().
This patch is a workaround for Xen PV. It consists of the following
changes:
- For Xen PV, use only the fallback allocation without
dma_alloc_noncontiguous()
- In the fallback allocation, use dma_alloc_coherent();
the DMA address from dma_alloc_coherent() is returned in get_addr
ops
- The DMA addresses are stored in an array; the first entry stores the
number of allocated pages in lower bits, which are referred at
releasing pages again
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: b04e1237923a ("ALSA: memalloc: Revive x86-specific WC page allocations again") Fixes: 236e5cf26a73 ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU") Link: https://lore.kernel.org/r/87tu256lqs.wl-tiwai@suse.de Link: https://lore.kernel.org/r/20230125153104.5527-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kernel crash was caused by a BPF program attached to the
"lsm_cgroup/socket_sock_rcv_skb" hook, which performed a call to
`bpf_setsockopt()` in order to set the TCP_NODELAY flag as an
example. Flags like TCP_NODELAY can prompt the kernel to flush a
socket's outgoing queue, and this hook
"lsm_cgroup/socket_sock_rcv_skb" is frequently triggered by
softirqs. The issue was that in certain circumstances, when
`tcp_write_xmit()` was called to flush the queue, it would also allow
BH (bottom-half) to run. This could lead to our program attempting to
flush the same socket recursively, which caused a `skbuff` to be
unlinked twice.
`security_sock_rcv_skb()` is triggered by `tcp_filter()`. This occurs
before the sock ownership is checked in `tcp_v4_rcv()`. Consequently,
if a bpf program runs on `security_sock_rcv_skb()` while under softirq
conditions, it may not possess the lock needed for `bpf_setsockopt()`,
thus presenting an issue.
The patch fixes this issue by ensuring that a BPF program attached to
the "lsm_cgroup/socket_sock_rcv_skb" hook is not allowed to call
`bpf_setsockopt()`.
The differences from v1 are
- changing commit log to explain holding the lock of the sock,
- emphasizing that TCP_NODELAY is not the only flag, and
- adding the fixes tag.
Not all targets that return PQ=1 and PDT=0 should be ignored. While
the SCSI spec is vague in this department, there appears to be a
critical mass of devices which rely on devices being accessible with
this combination of reported values.
Fixes: 85c8219d556a ("scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT") Link: https://lore.kernel.org/r/yq1lelrleqr.fsf@ca-mkp.ca.oracle.com Acked-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Martin Wilck <mwilck@suse.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit d2956ea8195f ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
According section
8.2.5.313 Select Input Register (IOMUXC_UART1_RXD_SELECT_INPUT)
of
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
the required setting for this specific pin configuration is "1"
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit dcf026f6df31 ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
The "id" comes from the user. Change the type to unsigned to prevent
an array underflow.
Fixes: 502508e6fea9 ("ASoC: SOF: ipc4: Add support for mtrace log extraction") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/Y8laruWOEwOC/dx9@kili Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When use tools/testing/selftests/kselftest_install.sh to make the
kselftest-list.txt under tools/testing/selftests/kselftest_install.
Then use tools/testing/selftests/kselftest_install/run_kselftest.sh to run
all the kselftests in kselftest-list.txt, it will be blocked by case
"filesystems/fat: run_fat_tests.sh" with "Warning: file run_fat_tests.sh
is not executable", so grant executable permission to run_fat_tests.sh to
fix this issue.
Register range information is copied in several places. The intent is
to transfer range/id information from one register/stack spill to
another. Currently this is done using direct register assignment, e.g.:
This example is unsafe because 64-bit write to fp[-8] at (5) is
conditional, thus not all bytes of fp[-8] are guaranteed to be set
when it is read at (8). However, currently the example passes
verification.
First, the execution path 1-10 is examined by verifier.
Suppose that a new checkpoint is created by is_state_visited() at (6).
After checkpoint creation:
- r1.parent points to checkpoint.r1,
- fp[-8].parent points to checkpoint.fp[-8].
At (6) the r1.live is set to REG_LIVE_WRITTEN.
At (7) the fp[-8].parent is set to r1.parent and fp[-8].live is set to
REG_LIVE_WRITTEN, because of the following code called in
check_stack_write_fixed_off():
static void save_register_state(struct bpf_func_state *state,
int spi, struct bpf_reg_state *reg,
int size)
{
...
state->stack[spi].spilled_ptr = *reg; // <--- parent & live copied
if (size == BPF_REG_SIZE)
state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
...
}
Note the intent to mark stack spill as written only if 8 bytes are
spilled to a slot, however this intent is spoiled by a 'live' field copy.
At (8) the checkpoint.fp[-8] should be marked as REG_LIVE_READ but
this does not happen:
- fp[-8] in a current state is already marked as REG_LIVE_WRITTEN;
- fp[-8].parent points to checkpoint.r1, parentage chain is used by
mark_reg_read() to mark checkpoint states.
At (10) the verification is finished for path 1-10 and jump 4-6 is
examined. The checkpoint.fp[-8] never gets REG_LIVE_READ mark and this
spill is pruned from the cached states by clean_live_states(). Hence
verifier state obtained via path 1-4,6 is deemed identical to one
obtained via path 1-6 and program marked as safe.
Note: the example should be executed with BPF_F_TEST_STATE_FREQ flag
set to force creation of intermediate verifier states.
This commit revisits the locations where bpf_reg_state instances are
copied and replaces the direct copies with a call to a function
copy_register_state(dst, src) that preserves 'parent' and 'live'
fields of the 'dst'.
In current bpf_send_signal() and bpf_send_signal_thread() helper
implementation, irq_work is used to handle nmi context. Hao Sun
reported in [1] that the current task at the entry of the helper
might be gone during irq_work callback processing. To fix the issue,
a reference is acquired for the current task before enqueuing into
the irq_work so that the queued task is still available during
irq_work callback processing.
On shutdown reference to i915 driver needs to be released to not spam
logs with unnecessary warnings. While at it do some additional cleanup
to make sure DSP is powered down and interrupts from device are
disabled.
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 4bd98881f2fe ("ASoC: Intel: add machine driver for SOF+ES8336") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: b085319cb9d4 ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 47023b7302ca ("ASoC: Intel: bytcr_rt5640: use HID translation util") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 8ca67241ef5a ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 7c97d1383598 ("ASoC: Intel: bytcht_es8316: fix HID handling") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: f714af7b4c8a ("ASoC: amd: add Machine driver for Jadeite platform") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230112112356.67643-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following build warnings are seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: cts-gpios: False schema does not allow [[33, 3, 1]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: rts-gpios: False schema does not allow [[33, 5, 1]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
...
The imx8m Venice Gateworks boards do not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.
Fixes: 2982481577db ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch is fix for Linux kernel v2.6.33 or later.
For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem
have had an issue of use-after-free. The subsystem allows multiple
user space listeners to the region, while data of the payload was likely
released before the listeners execute read(2) to access to it for copying
to user space.
The issue was fixed by a commit b17b4587c51a ("firewire: core: fix
use-after-free regression in FCP handler"). The object of payload is
duplicated in kernel space for each listener. When the listener executes
ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to
be released.
However, it causes memory leak since the commit relies on call of
release_request() in drivers/firewire/core-cdev.c. Against the
expectation, the function is never called due to the design of
release_client_resource(). The function delegates release task
to caller when called with non-NULL fourth argument. The implementation
of ioctl_send_response() is the case. It should release the object
explicitly.
Commit 2e0aea687e29 ("net: Support GRO/GSO fraglist chaining.")
introduced UDP listifyed GRO. The segmentation relies on frag_list being
untouched when passing through the network stack. This assumption can be
broken sometimes, where frag_list itself gets pulled into linear area,
leaving frag_list being NULL. When this happens it can trigger
following NULL pointer dereference, and panic the kernel. Reverse the
test condition should fix it.
Fixes: 2e0aea687e29 ("net: Support GRO/GSO fraglist chaining.") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/Y9gt5EUizK1UImEP@debian Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c174a16fac4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
adjusted the policy to enable wakeup by default if the ACPI tables
indicated that a device was wake capable.
It was reported however that this broke suspend on at least two System76
systems in S3 mode and two Lenovo Gen2a systems, but only with S3.
When the machines are set to s2idle, wakeup behaves properly.
Configuring the GPIOs for wakeup with S3 doesn't work properly, so only
set it when the system supports low power idle.
Fixes: 7c174a16fac4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Fixes: 86e28f24938ab ("i2c: acpi: Use ACPI wake capability bit to set wake_irq") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2357 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2162013 Reported-by: Nathan Smythe <ncsmythe@scruboak.org> Tested-by: Nathan Smythe <ncsmythe@scruboak.org> Suggested-by: Raul Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c174a16fac4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NL5xRU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.
Fixes: 7c174a16fac4 ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Reported-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 Co-developed-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix this by initializing rc to 0 as cache_refresh_path() would not set
it in case of success.
Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202301190004.bEHvbKG6-lkp@intel.com/ Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the function sdma_load_context() fails, the sdma_desc will be
freed, but the allocated desc->bd is forgot to be freed.
We already met the sdma_load_context() failure case and the log as
below:
[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready
...
In this case, the desc->bd will not be freed without this change.
Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.
GCC 11.1.0 and 11.2.0 generate a wrong warning when compiling the
kernel e.g. with allmodconfig:
arch/s390/kernel/setup.c: In function ‘setup_lowcore_dat_on’:
./include/linux/fortify-string.h:57:33: error: ‘__builtin_memcpy’ reading 128 bytes from a region of size 0 [-Werror=stringop-overread]
...
arch/s390/kernel/setup.c:526:9: note: in expansion of macro ‘memcpy’
526 | memcpy(abs_lc->cregs_save_area, S390_lowcore.cregs_save_area,
| ^~~~~~
This could be addressed by using absolute_pointer() with the
S390_lowcore macro, but this is not a good idea since this generates
worse code for performance critical paths.
Therefore simply use a for loop to copy the array in question and get
rid of the warning.
When there are no read queues read requests will be assigned a
default queue on allocation. However, blk_mq_get_cached_request() is not
prepared for that and will fail all attempts to grab read requests from
the cache. Worst case it doubles the number of requests allocated,
roughly half of which will be returned by blk_mq_free_plug_rqs().
It only affects batched allocations and so is io_uring specific.
For reference, QD8 t/io_uring benchmark improves by 20-35%.
The Acer Aspire 4810T predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At unwind_start(), it is better to get its frame info here rather than
get them outside, even we don't have 'regs'. In this way we can simply
use unwind_{start, next_frame, done} outside.
When multiple interfaces are present in the local interface
list, new skb copy is taken before rx processing except for
the first interface. The address translation happens each
time only on the original skb since the hdr pointer is not
updated properly to the newly created skb.
As a result frames start to drop in userspace when address
based checks or search fails.
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
The following kernel panic can be triggered when a task with pid=1 attaches
a prog that attempts to send killing signal to itself, also see [1] for more
details:
Stale error status reported from a previous message transaction must be
cleared before starting a new transaction to avoid being confusingly
reported in the following SCMI message dump traces.
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected)
From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
i is 32 or more this can lead to an overflow. Avoid this by shifting
using the BIT_ULL macro instead.
Fixes: e4826b8fa610 ("perf/x86/amd: Constrain Large Increment per Cycle events") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
The preferred form for Renesas' compatible strings is:
"<vendor>,<family>-<module>"
Somehow the compatible string for the r9a09g011 I2C IP was upstreamed
as renesas,i2c-r9a09g011 instead of renesas,r9a09g011-i2c, which
is really confusing, especially considering the generic fallback
is renesas,rzv2m-i2c.
The first user of renesas,i2c-r9a09g011 in the kernel is not yet in
a kernel release, it will be in v6.1, therefore it can still be
fixed in v6.1.
Even if we don't fix it before v6.2, I don't think there is any
harm in making such a change.
s/renesas,i2c-r9a09g011/renesas,r9a09g011-i2c/g for consistency.
Baoquan reported that after triggering a crash the subsequent crash-kernel
fails to boot about half of the time. It triggers a NULL pointer
dereference in the periodic tick code.
This happens because the legacy timer interrupt (IRQ0) is resent in
software which happens in soft interrupt (tasklet) context. In this context
get_irq_regs() returns NULL which leads to the NULL pointer dereference.
The reason for the resend is a spurious APIC interrupt on the IRQ0 vector
which is captured and leads to a resend when the legacy timer interrupt is
enabled. This is wrong because the legacy PIC interrupts are level
triggered and therefore should never be resent in software, but nothing
ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not
know about their trigger type.
Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.
Fixes: 1b9b99027512 ("[PATCH] genirq: add genirq sw IRQ-retrigger") Reported-by: Baoquan He <bhe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/87mt6rjrra.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I used the wikipedia table for ordering extensions when updating the
pattern here in commit 2221d94c2970 ("dt-bindings: riscv: add new
riscv,isa strings for emulators").
Unfortunately that table did not match canonical order, as defined by
the RISC-V ISA Manual, which defines extension ordering in (what is
currently) Table 41, "Standard ISA extension names". Fix things up by
re-sorting v (vector) and adding p (packed-simd) & j (dynamic
languages). The e (reduced integer) and g (general) extensions are still
intentionally left out.
The RISC-V ISA Manual allows the first multi-letter extension to avoid
a leading underscore. Underscores are only required between multi-letter
extensions.
The dt-binding does not validate that a multi-letter extension is
canonically ordered, as that'd need an even worse regex than is here,
but it should not fail validation for valid ISA strings.
Allow the first multi-letter extension to appear immediately after
the single-letter extensions.
Commit c7167a3c901a ("x86/boot: Skip realmode init code when running as
Xen PV guest") missed one code path accessing real_mode_header, leading
to dereferencing NULL when suspending the system under Xen:
Fix that by adding an optional acpi callback allowing to skip setting
the wakeup address, as in the Xen PV case this will be handled by the
hypervisor anyway.
Fixes: c7167a3c901a ("x86/boot: Skip realmode init code when running as Xen PV guest") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/all/20230117155724.22940-1-jgross%40suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hypervisor can enable various new features (SEV_FEATURES[1:63]) and start a
SNP guest. Some of these features need guest side implementation. If any of
these features are enabled without it, the behavior of the SNP guest will be
undefined. It may fail booting in a non-obvious way making it difficult to
debug.
Instead of allowing the guest to continue and have it fail randomly later,
detect this early and fail gracefully.
The SEV_STATUS MSR indicates features which the hypervisor has enabled. While
booting, SNP guests should ascertain that all the enabled features have guest
side implementation. In case a feature is not implemented in the guest, the
guest terminates booting with GHCB protocol Non-Automatic Exit(NAE) termination
request event, see "SEV-ES Guest-Hypervisor Communication Block Standardization"
document (currently at https://developer.amd.com/wp-content/resources/56421.pdf),
section "Termination Request".
Populate SW_EXITINFO2 with mask of unsupported features that the hypervisor can
easily report to the user.
More details in the AMD64 APM Vol 2, Section "SEV_STATUS MSR".
[ bp:
- Massage.
- Move snp_check_features() call to C code.
Note: the CC:stable@ aspect here is to be able to protect older, stable
kernels when running on newer hypervisors. Or not "running" but fail
reliably and in a well-defined manner instead of randomly. ]
Fixes: 88eee0e6967f ("x86/sev: Check SEV-SNP features support") Signed-off-by: Nikunj A Dadhania <nikunj@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20230118061943.534309-1-nikunj@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time. Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.
Commit 466fb3775920 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned. There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.
Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.
It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.
Following line should listen for a rising edge and exit after the first
one since '-c 1' is provided.
# gpio-event-mon -n gpiochip1 -o 0 -r -c 1
It works with kernel 4.19 but it doesn't work with 5.10. In 5.10 the
above command doesn't exit after the first rising edge it keep listening
for an event forever. The '-c 1' is not taken into an account.
The problem is in commit 0bebb91afbfc ("tools: gpio: add multi-line
monitoring to gpio-event-mon").
Before this commit the iterator 'i' in monitor_device() is used for
counting of the events (loops). In the case of the above command (-c 1)
we should start from 0 and increment 'i' only ones and hit the 'break'
statement and exit the process. But after the above commit counting
doesn't start from 0, it start from 1 when we listen on one line.
It is because 'i' is used from one more purpose, counting of lines
(num_lines) and it isn't restore to 0 after following code
for (i = 0; i < num_lines; i++)
gpiotools_set_bit(&values.mask, i);
Restore the initial value of the iterator to 0 in order to allow counting
of loops to work for any cases.
Fixes: 0bebb91afbfc ("tools: gpio: add multi-line monitoring to gpio-event-mon") Signed-off-by: Ivo Borisov Shopov <ivoshopov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: tweak the commit message] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit da192e73e696 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com> Fixes: 6cc22173ce4d ("drm/vmwgfx: Port vmwgfx to arm64") Fixes: 92ef7aa75632 ("ASoC: codecs: add support for ES8326") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'ublk_chr_class' is needed when deleting ublk char devices in
ublk_exit(), so move it after devices(idle) are removed.
Fixes the following warning reported by Harris, James R:
[ 859.178950] sysfs group 'power' not found for kobject 'ublkc0'
[ 859.178962] WARNING: CPU: 3 PID: 1109 at fs/sysfs/group.c:278 sysfs_remove_group+0x9c/0xb0
It turns out the optimisation implemented by commit dd6c876afccc is
totally broken, since all the places that consume hw->dtcs_used for
events other than cycle count are still not expecting it to be sparsely
populated, and fail to read all the relevant DTC counters correctly if
so.
If implemented correctly, the optimisation potentially saves up to 3
register reads per event update, which is reasonably significant for
events targeting a single node, but still not worth a massive amount of
additional code complexity overall. Getting it right within the current
design looks a fair bit more involved than it was ever intended to be,
so let's just make a functional revert which restores the old behaviour
while still backporting easily.
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok
as long as only a single TX queue is supported. But support for multiple
TX queues was introduced with c9620b915cd9 and I missed to adapt stop
and wake of TX queues.
Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific
TX queue.
During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:
Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks. If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.
Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:
projects / kernel.git / log