Before the commit 33fe6a60a178 ("mm: Cleanup faultaround and finish_fault()
codepaths") there was a call to update_mmu_cache in alloc_set_pte that
used to invalidate TLB entry caching invalid PTE that caused a page
fault. That commit removed that call so now invalid TLB entry survives
causing repetitive page faults on the CPU that took the initial fault
until that TLB entry is occasionally evicted. This issue is spotted by
the xtensa TLB sanity checker.
Fix this issue by defining update_mmu_tlb function that flushes TLB entry
for the faulting address.
[BUG]
There is a bug report that a bitflip in the transid part of an extent
buffer makes btrfs to reject certain tree blocks:
BTRFS error (device dm-0): parent transid verify failed on 1382301696 wanted 262166 found 22
[CAUSE]
Note the failed transid check, hex(262166) = 0x40016, while
hex(22) = 0x16.
It's an obvious bitflip.
Furthermore, the reporter also confirmed the bitflip is from the
hardware, so it's a real hardware caused bitflip, and such problem can
not be detected by the existing tree-checker framework.
As tree-checker can only verify the content inside one tree block, while
generation of a tree block can only be verified against its parent.
So such problem remain undetected.
[FIX]
Although tree-checker can not verify it at write-time, we still have a
quick (but not the most accurate) way to catch such obvious corruption.
Function csum_one_extent_buffer() is called before we submit metadata
write.
Thus it means, all the extent buffer passed in should be dirty tree
blocks, and should be newer than last committed transaction.
Using that we can catch the above bitflip.
Although it's not a perfect solution, as if the corrupted generation is
higher than the correct value, we have no way to catch it at all.
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org> Link: https://lore.kernel.org/linux-btrfs/2dfcbc130c55cc6fd067b93752e90bd2b079baca.camel@scientia.org/ CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Qu Wenruo <wqu@sus,ree.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bytes_pinned is always accessed under space_info->lock, except in
btrfs_preempt_reclaim_metadata_space, however the other members are
accessed under that lock. The reserved member of the rsv's are also
partially accessed under a lock and partially not. Move all these
accesses into the same lock to ensure consistency.
This could potentially race and lead to a flush instead of a commit but
it's not a big problem as it's only for preemptive flush.
CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Niels Dossche <niels.dossche@ugent.be> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a hung_task issue with running generic/068 on an SMR
device. The hang occurs while a process is trying to thaw the
filesystem. The process is trying to take sb->s_umount to thaw the
FS. The lock is held by fsstress, which calls btrfs_sync_fs() and is
waiting for an ordered extent to finish. However, as the FS is frozen,
the ordered extents never finish.
Having an ordered extent while the FS is frozen is the root cause of
the hang. The ordered extent is initiated from btrfs_relocate_chunk()
which is called from btrfs_reclaim_bgs_work().
This commit adds sb_*_write() around btrfs_relocate_chunk() call
site. For the usual "btrfs balance" command, we already call it with
mnt_want_file() in btrfs_ioctl_balance().
During encoder driver open controls are initialized via a call
to v4l2_ctrl_handler_setup which returns EINVAL error for
V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM v4l2 control. The control
default value is disabled and because of firmware limitations
8x8 transform cannot be disabled for the supported HIGH and
CONSTRAINED_HIGH profiles.
To fix the issue change the control default value to enabled
(this is fine because the firmware enables 8x8 transform for
high and constrained_high profiles by default). Also, correct
the checking of profile ids in s_ctrl from hfi to v4l2 ids.
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a genpd with GENPD_FLAG_IRQ_SAFE gets removed, the following
sleep-in-atomic bug will be seen, as genpd_debug_remove() will be called
with a spinlock being held.
However, the bch_btree_node_read and bch_btree_node_read_done
maybe call bch_cache_set_error, then the CACHE_SET_IO_DISABLE
will be set. If the flag already set, the main thread return
error. At the same time, maybe some threads still running and
read NULL pointer, the kernel will crash.
This patch change the event wait condition, the main thread must
wait for all threads to stop.
Fixes: 7145c87c3d76a ("bcache: make bch_btree_check() to be multithreaded") Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA
key size. RFC8017 specifically requires the verifier to check this
(https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2).
Commit 9ff67de06aba ("crypto: Add hash param to pkcs1pad") changed the
kernel to allow longer signatures, but didn't explain this part of the
change; it seems to be unrelated to the rest of the commit.
Revert this change, since it doesn't appear to be correct.
We can be pretty sure that no one is relying on overly-long signatures
(which would have to be front-padded with zeroes) being supported, given
that they would have been broken since commit e2c1e967a859
("crypto: akcipher - new verify API for public key algorithms").
Fixes: 9ff67de06aba ("crypto: Add hash param to pkcs1pad") Cc: <stable@vger.kernel.org> # v4.6+ Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Suggested-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e2c1e967a859 ("crypto: akcipher - new verify API for public key
algorithms") changed akcipher_alg::verify to take in both the signature
and the actual hash and do the signature verification, rather than just
return the hash expected by the signature as was the case before. To do
this, it implemented a hack where the signature and hash are
concatenated with each other in one scatterlist.
Obviously, for this to work correctly, akcipher_alg::verify needs to
correctly extract the two items from the scatterlist it is given.
Unfortunately, it doesn't correctly extract the hash in the case where
the signature is longer than the RSA key size, as it assumes that the
signature's length is equal to the RSA key size. This causes a prefix
of the hash, or even the entire hash, to be taken from the *signature*.
(Note, the case of a signature longer than the RSA key size should not
be allowed in the first place; a separate patch will fix that.)
It is unclear whether the resulting scheme has any useful security
properties.
Fix this by correctly extracting the hash from the scatterlist.
Fixes: e2c1e967a859 ("crypto: akcipher - new verify API for public key algorithms") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pkcs1pad template can be instantiated with an arbitrary akcipher
algorithm, which doesn't make sense; it is specifically an RSA padding
scheme. Make it check that the underlying algorithm really is RSA.
"In several other operating systems, it is a hard requirement that the
second argument to execve(2) be the name of a program, thus prohibiting
a scenario where argc < 1. POSIX 2017 also recommends this behaviour,
but it is not an explicit requirement[2]:
The argument arg0 should point to a filename string that is
associated with the process being started by one of the exec
functions.
...
Interestingly, Michael Kerrisk opened an issue about this in 2008[3],
but there was no consensus to support fixing this issue then.
Hopefully now that CVE-2021-4034 shows practical exploitative use[4]
of this bug in a shellcode, we can reconsider.
This issue is being tracked in the KSPP issue tracker[5]."
While the initial code searches[6][7] turned up what appeared to be
mostly corner case tests, trying to that just reject argv == NULL
(or an immediately terminated pointer list) quickly started tripping[8]
existing userspace programs.
The next best approach is forcing a single empty string into argv and
adjusting argc to match. The number of programs depending on argc == 0
seems a smaller set than those calling execve with a NULL argv.
Account for the additional stack space in bprm_stack_limits(). Inject an
empty string when argc == 0 (and set argc = 1). Warn about the case so
userspace has some notice about the change:
process './argc0' launched './argc0' with NULL argv: empty string added
Additionally WARN() and reject NULL argv usage for kernel threads.
pstore_dump() is *always* invoked in atomic context (nowadays in an RCU
read-side critical section, before that under a spinlock).
It doesn't make sense to try to use semaphores here.
This is mostly a revert of commit fa10f439632c ("pstore: Convert buf_lock
to semaphore"), except that two parts aren't restored back exactly as they
were:
- keep the lock initialization in pstore_register
- in efi_pstore_write(), always set the "block" flag to false
- omit "is_locked", that was unnecessary since
commit 4c80b01d2999 ("pstore: Actually give up during locking failure")
- fix the bailout message
The actual problem that the buggy commit was trying to address may have
been that the use of preemptible() in efi_pstore_write() was wrong - it
only looks at preempt_count() and the state of IRQs, but __rcu_read_lock()
doesn't touch either of those under CONFIG_PREEMPT_RCU.
(Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in
RCU read-side critical sections, but you're not allowed to actively
block/reschedule.)
Lockdep probably never caught the problem because it's very rare that you
actually hit the contended case, so lockdep always just sees the
down_trylock(), not the down_interruptible(), and so it can't tell that
there's a problem.
Fixes: fa10f439632c ("pstore: Convert buf_lock to semaphore") Cc: stable@vger.kernel.org Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220314185953.2068993-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently tx_params is being re-assigned with a new value and the
previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten.
The assignment operator is incorrect, the original intent was to
bit-wise or the value in. Fix this by replacing the = operator
with |= instead.
Kudos to Christian Lamparter for suggesting the correct fix.
Fixes: 344e4e4b61f2 ("carl9170: mac80211 glue and command interface") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: <Stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.
It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:
kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue
The root cause is the configuration of the MGA GCTL6 register
According to the GCTL6 register documentation:
bit 0 is gcgrmode:
0: Enables alpha mode, and the character generator addressing system is
activated.
1: Enables graphics mode, and the character addressing system is not
used.
bit 1 is chainodd even:
0: The A0 signal of the memory address bus is used during system memory
addressing.
1: Allows A0 to be replaced by either the A16 signal of the system
address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
page select) field, described on page 3-294).
bit 3-2 are memmapsl:
Memory map select bits 1 and 0. VGA.
These bits select where the video memory is mapped, as shown below:
00 => A0000h - BFFFFh
01 => A0000h - AFFFFh
10 => B0000h - B7FFFh
11 => B8000h - BFFFFh
bit 7-4 are reserved.
Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.
Thus changing the value 0x05 to 0x0d
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220119102905.1194787-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add required VDD supplies to HDMI block on SMDK5420. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale Octa and Odroid XU3 boards (voltage matches).
Add required VDD supplies to HDMI block on SMDK5250. Without them, the
HDMI driver won't probe. Because of lack of schematics, use same
supplies as on Arndale 5250 board (voltage matches).
The gpa1-4 pin was put twice in UART3 pin configuration of Exynos5250,
instead of proper pin gpa1-5.
Fixes: a86266feb45e ("ARM: dts: add pin state information in client nodes for Exynos5 platforms") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20211230195325.328220-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PMERRLOC resource size was set to 0x100, which resulted in HSMC_ERRLOCx
register being truncated to offset x = 21, causing error correction to
fail if more than 22 bit errors and if 24 or 32 bit error correction
was supported.
The "atmel,use-dma-rx", "atmel,use-dma-rx" dt properties are not used by
the i2c-at91 driver, nor they are defined in the bindings file, thus remove
them.
Again new complaints surfaced that we had broken the ABI here,
although previously all the userspace tools had agreed that it
was their mistake and fixed it. Yet now there are cases (e.g.
RHEL) that want to run old userspace with newer kernels, and
thus are broken.
Since this is a bit of a whack-a-mole thing, change the whole
extensibility scheme of rfkill to no longer just rely on the
message lengths, but instead require userspace to opt in via a
new ioctl to a given maximum event size that it is willing to
understand.
By default, set that to RFKILL_EVENT_SIZE_V1 (8), so that the
behaviour for userspace not calling the ioctl will look as if
it's just running on an older kernel.
The code to set the shifter STe palette registers has a long
standing operator precedence bug, manifesting as colors set
on a 2 bits per pixel frame buffer coming up with a distinctive
blue tint.
Add parentheses around the calculation of the per-color palette
data before shifting those into their respective bit field position.
This bug goes back a long way (2.4 days at the very least) so there
won't be a Fixes: tag.
Hot-unplug all firmware-framebuffer devices as part of removing
them via remove_conflicting_framebuffers() et al. Releases all
memory regions to be acquired by native drivers.
Firmware, such as EFI, install a framebuffer while posting the
computer. After removing the firmware-framebuffer device from fbdev,
a native driver takes over the hardware and the firmware framebuffer
becomes invalid.
Firmware-framebuffer drivers, specifically simplefb, don't release
their device from Linux' device hierarchy. It still owns the firmware
framebuffer and blocks the native drivers from loading. This has been
observed in the vmwgfx driver. [1]
Initiating a device removal (i.e., hot unplug) as part of
remove_conflicting_framebuffers() removes the underlying device and
returns the memory range to the system.
Tag code stored in bit7:5 for CTA block byte[3] is not the same as
CEA extension block definition. Only check CEA block has
basic audio support.
v3: update commit message.
Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Shawn C Lee <shawn.c.lee@intel.com> Cc: intel-gfx <intel-gfx@lists.freedesktop.org> Signed-off-by: Cooper Chiou <cooper.chiou@intel.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> Fixes: 2db1075b1d52 ("drm/edid: parse CEA blocks embedded in DisplayID") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220324061218.32739-1-shawn.c.lee@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't
disable merges across different cgroups. This obviously can lead to
accounting and control errors but more importantly to priority inversions -
e.g. an IO which belongs to a higher priority cgroup or IO class may end up
getting throttled incorrectly because it gets merged to an IO issued from a
low priority cgroup.
Fix it by adding blk_cgroup_mergeable() which is called from merge paths and
rejects cross-cgroup and cross-issue_as_root merges.
When IO requests are made continuously and the target block device
handles requests faster than request arrival, the request dispatch loop
keeps on repeating to dispatch the arriving requests very long time,
more than a minute. Since the loop runs as a workqueue worker task, the
very long loop duration triggers workqueue watchdog timeout and BUG [1].
To avoid the very long loop duration, break the loop periodically. When
opportunity to dispatch requests still exists, check need_resched(). If
need_resched() returns true, the dispatch loop already consumed its time
slice, then reschedule the dispatch work and break the loop. With heavy
IO load, need_resched() does not return true for 20~30 seconds. To cover
such case, check time spent in the dispatch loop with jiffies. If more
than 1 second is spent, reschedule the dispatch work and break the loop.
Make the name of the anon inode fd "[landlock-ruleset]" instead of
"landlock-ruleset". This is minor but most anon inode fds already
carry square brackets around their name:
For the sake of consistency lets do the same for the landlock-ruleset anon
inode fd that comes with landlock. We did the same in 615c71384951 ("uapi, fsopen: use square brackets around "fscontext" [ver #2]")
for the new mount api.
When a 6pack device is detaching, the sixpack_close() will act to cleanup
necessary resources. Although del_timer_sync() in sixpack_close()
won't return if there is an active timer, one could use mod_timer() in
sp_xmit_on_air() to wake up timer again by calling userspace syscall such
as ax25_sendmsg(), ax25_connect() and ax25_ioctl().
This unexpected waked handler, sp_xmit_on_air(), realizes nothing about
the undergoing cleanup and may still call pty_write() to use driver layer
resources that have already been released.
One of the possible race conditions is shown below:
The corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470
Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0
...
Call Trace:
...
queue_work_on+0x3f/0x50
pty_write+0xcd/0xe0pty_write+0xcd/0xe0
sp_xmit_on_air+0xb2/0x1f0
call_timer_fn+0x28/0x150
__run_timers.part.0+0x3c2/0x470
run_timer_softirq+0x3b/0x80
__do_softirq+0xf1/0x380
...
This patch reorders the del_timer_sync() after the unregister_netdev()
to avoid UAF bugs. Because the unregister_netdev() is well synchronized,
it flushs out any pending queues, waits the refcount of net_device
decreases to zero and removes net_device from kernel. There is not any
running routines after executing unregister_netdev(). Therefore, we could
not arouse timer from userspace again.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently mb_optimize_scan scan feature which improves filesystem
performance heavily (when FS is fragmented), seems to be not working
with files with extents (ext4 by default has files with extents).
This patch fixes that and makes mb_optimize_scan feature work
for files with extents.
Below are some performance numbers obtained when allocating a 10M and 100M
file with and w/o this patch on a filesytem with no 1M contiguous block.
We inject IO error when rmdir non empty direcory, then got issue as follows:
step1: mkfs.ext4 -F /dev/sda
step2: mount /dev/sda test
step3: cd test
step4: mkdir -p 1/2
step5: rmdir 1
[ 110.920551] ext4_empty_dir: inject fault
[ 110.921926] EXT4-fs warning (device sda): ext4_rmdir:3113: inode #12:
comm rmdir: empty directory '1' has too many links (3)
step6: cd ..
step7: umount test
step8: fsck.ext4 -f /dev/sda
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Entry '..' in .../??? (13) has deleted/unused inode 12. Clear<y>? yes
Pass 3: Checking directory connectivity
Unconnected directory inode 13 (...)
Connect to /lost+found<y>? yes
Pass 4: Checking reference counts
Inode 13 ref count is 3, should be 2. Fix<y>? yes
Pass 5: Checking group summary information
/dev/sda: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda: 12/131072 files (0.0% non-contiguous), 26157/524288 blocks
ext4_rmdir
if (!ext4_empty_dir(inode))
goto end_rmdir;
ext4_empty_dir
bh = ext4_read_dirblock(inode, 0, DIRENT_HTREE);
if (IS_ERR(bh))
return true;
Now if read directory block failed, 'ext4_empty_dir' will return true, assume
directory is empty. Obviously, it will lead to above issue.
To solve this issue, if read directory block failed 'ext4_empty_dir' just
return false. To avoid making things worse when file system is already
corrupted, 'ext4_empty_dir' also return false.
ftrace's __print_symbolic() requires that any enum values used in the
symbol to string translation table be wrapped in a TRACE_DEFINE_ENUM
so that the enum value can be decoded from the ftrace ring buffer by
user space tooling.
This patch also fixes few other problems found in this trace point.
e.g. dereferencing structures in TP_printk which should not be done
at any cost.
Also to avoid checkpatch warnings, this patch removes those
whitespaces/tab stops issues.
Cc: stable@kernel.org Fixes: 95d2b4933dd9 ("ext4: main fast-commit commit path") Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/b4b9691414c35c62e570b723e661c80674169f9a.1647057583.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When I rewrote the VMA dumping logic for coredumps, I changed it to
recognize ELF library mappings based on the file being executable instead
of the mapping having an ELF header. But turns out, distros ship many ELF
libraries as non-executable, so the heuristic goes wrong...
Restore the old behavior where FILTER(ELF_HEADERS) dumps the first page of
any offset-0 readable mapping that starts with the ELF magic.
This fix is technically layer-breaking a bit, because it checks for
something ELF-specific in fs/coredump.c; but since we probably want to
share this between standard ELF and FDPIC ELF anyway, I guess it's fine?
And this also keeps the change small for backporting.
Cc: stable@vger.kernel.org Fixes: 79da00b0f1fc ("coredump: rework elf/elf_fdpic vma_dump_size() into common helper") Reported-by: Bill Messmer <wmessmer@microsoft.com> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220126025739.2014888-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__acpi_node_get_property_reference() is documented to return -ENOENT if
the caller requests a property reference at an index that does not exist,
not -EINVAL which it actually does.
Fix this by returning -ENOENT consistenly, independently of whether the
property value is a plain reference or a package.
Fixes: 00281363d16b ("ACPI: properties: Align return codes of __acpi_node_get_property_reference()") Cc: 4.14+ <stable@vger.kernel.org> # 4.14+ Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert commit 9227c3a1782b ("ACPI: Pass the same capabilities to the
_OSC regardless of the query flag") which caused legitimate usage
scenarios (when the platform firmware does not want the OS to control
certain platform features controlled by the system bus scope _OSC) to
break and was misguided by some misleading language in the _OSC
definition in the ACPI specification (in particular, Section 6.2.11.1.3
"Sequence of _OSC Calls" that contradicts other perts of the _OSC
definition).
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com Reported-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A53 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A72 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A72 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
Though GIC ARE option is disabled for no GIC-v2 compatibility,
Cortex-A53 is free to implement the CPU interface as long as it
communicates with the GIC using the stream protocol. This requires
that the SoC integration mark out the PERIPHBASE[1] as reserved area
within the SoC. See longer discussion in [2] for further information.
Update the GIC register map to indicate offsets from PERIPHBASE based
on [3]. Without doing this, systems like kvm will not function with
gic-v2 emulation.
The following patches resulted in deferring crash kernel reservation to
mem_init(), mainly aimed at platforms with DMA memory zones (no IOMMU),
in particular Raspberry Pi 4.
commit cc78e6f0e761 ("arm64: use both ZONE_DMA and ZONE_DMA32")
commit ec7cf4b10e89 ("arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges")
commit 6b719e93188d ("arm64: mm: Move reserve_crashkernel() into mem_init()")
commit 9e846c161788 ("arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required")
Above changes introduced boot slowdown due to linear map creation for
all the memory banks with NO_BLOCK_MAPPINGS, see discussion[1]. The proposed
changes restore crash kernel reservation to earlier behavior thus avoids
slow boot, particularly for platforms with IOMMU (no DMA memory zones).
Tested changes to confirm no ~150ms boot slowdown on our SoC with IOMMU
and 8GB memory. Also tested with ZONE_DMA and/or ZONE_DMA32 configs to confirm
no regression to deferring scheme of crash kernel memory reservation.
In both cases successfully collected kernel crash dump.
Commit 739a65c0e05d ("arm64: signal: nofpsimd: Handle fp/simd context for
signal frames") introduced saving the fp/simd context for signal handling
only when support is available. But setup_sigframe_layout() always
reserves memory for fp/simd context. The additional memory is not touched
because preserve_fpsimd_context() is not called and thus the magic is
invalid.
This may lead to an error when parse_user_sigframe() checks the fp/simd
area and does not find a valid magic number.
Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviwed-by: Mark Brown <broonie@kernel.org> Fixes: 739a65c0e05d3612 ("arm64: signal: nofpsimd: Handle fp/simd context for signal frames") Cc: <stable@vger.kernel.org> # 5.6.x Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220225104008.820289-1-david.engraf@sysgo.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fu740 PCIe core does not probe any devices on the SiFive Unmatched
board without this fix (or having U-Boot explicitly start the PCIe via
either boot-script or user command). The fix is to start the link at
2.5GT/s speeds and once the link is up then change the maximum speed back
to the default.
The U-Boot driver claims to set the link-speed to 2.5GT/s to get the probe
to work (and U-Boot does print link up at 2.5GT/s) in the following code:
https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/pci/pcie_dw_sifive.c?id=v2022.01#L271
When switching from __get_user to fault_in_pages_readable, commit 43fe16cd781a broke kvm_use_magic_page: like __get_user,
fault_in_pages_readable returns 0 on success.
bio chain generated by blk_queue_split().
Some split bio fails and propagates its error status to the "parent" bio.
But then the (last part of the) parent bio itself completes without error.
We would clobber the already recorded error status with BLK_STS_OK,
causing silent data corruption.
Reproducer:
-----------
How to trigger this in the real world within seconds:
DRBD on top of degraded parity raid,
small stripe_cache_size, large read_ahead setting.
Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED",
umount and mount again, "reboot").
Cause significant read ahead.
Large read ahead request is split by blk_queue_split().
Parts of the read ahead that are already in the stripe cache,
or find an available stripe cache to use, can be serviced.
Parts of the read ahead that would need "too much work",
would need to wait for a "stripe_head" to become available,
are rejected immediately.
For larger read ahead requests that are split in many pieces, it is very
likely that some "splits" will be serviced, but then the stripe cache is
exhausted/busy, and the remaining ones will be rejected.
It is perfectly valid if len is zero and passing in the NULL.
Unfortunately, the runtime string check at time of reading the trace sees
the NULL and flags it as a bad string and produces a WARN_ON().
Handle this case by passing into the test function if the format has an
asterisk (star) and if so, if the length is zero, then mark it as safe.
Link: https://lore.kernel.org/all/YjsWzuw5FbWPrdqq@bfoster/ Cc: stable@vger.kernel.org Reported-by: Brian Foster <bfoster@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Fixes: 7da36d29321f4 ("tracing: Add a verifier to check string pointers for trace events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1c1513529a79 ("dm integrity: don't replay journal data past the
end of the device") skips journal replay if the target sector points
beyond the end of the device. Unfortunatelly, it doesn't set the
journal entry unused, which resulted in this BUG being triggered:
BUG_ON(!journal_entry_is_unused(je))
Fix this by calling journal_entry_set_unused() for this case.
Fixes: 1c1513529a79 ("dm integrity: don't replay journal data past the end of the device") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Milan Broz <gmazyland@gmail.com>
[snitzer: revised header] Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DM handles a flush with data by first issuing an empty flush and then
once it completes the REQ_PREFLUSH flag is removed and the payload is
issued. The problem fixed by this commit is that both the empty flush
bio and the data payload will account the full extent of the data
payload.
Fix this by factoring out dm_io_acct() and having it wrap all IO
accounting to set the size of bio with REQ_PREFLUSH to 0, account the
IO, and then restore the original size.
Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 764cb973a5ca ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.
When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.
Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.
dm_stats_account_io()'s STAT_PRECISE_TIMESTAMPS support doesn't handle
the fact that with commit 085dc8e86f3d ("dm: properly fix redundant
bio-based IO accounting") io->start_time _may_ be in the past (meaning
the start_io_acct() was deferred until later).
Add a new dm_stats_recalc_precise_timestamps() helper that will
set/clear a new 'precise_timestamps' flag in the dm_stats struct based
on whether any configured stats enable STAT_PRECISE_TIMESTAMPS.
And update DM core's alloc_io() to use dm_stats_record_start() to set
stats_aux.duration_ns if stats->precise_timestamps is true.
Also, remove unused 'last_sector' and 'last_rw' members from the
dm_stats struct.
When we use HW-tag based kasan and enable vmalloc support, we hit the
following bug. It is due to comparison between tagged object and
non-tagged pointer.
We need to reset the kasan tag when we need to compare tagged object and
non-tagged pointer.
In some cases it appears the invalidation of a hwpoisoned page fails
because the page is still mapped in another process. This can cause a
program to be continuously restarted and die when it page faults on the
page that was not invalidated. Avoid that problem by unmapping the
hwpoisoned page when we find it.
Another issue is that sometimes we end up oopsing in finish_fault, if
the code tries to do something with the now-NULL vmf->page. I did not
hit this error when submitting the previous patch because there are
several opportunities for alloc_set_pte to bail out before accessing
vmf->page, and that apparently happened on those systems, and most of
the time on other systems, too.
However, across several million systems that error does occur a handful
of times a day. It can be avoided by returning VM_FAULT_NOPAGE which
will cause do_read_fault to return before calling finish_fault.
Link: https://lkml.kernel.org/r/20220325161428.5068d97e@imladris.surriel.com Fixes: 0389babd826b ("mm: invalidate hwpoison page cache page in fault path") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 06a4038acf08 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.
As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed. Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.
Thus revert this patch and return proper bytes advised.
Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com Fixes: 06a4038acf080f ("mm: madvise: skip unmapped vma holes passed to process_madvise") Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm: madvise: return correct bytes processed with
process_madvise", v2. With the process_madvise(), always choose to return
non zero processed bytes over an error. This can help the user to know on
which VMA, passed in the 'struct iovec' vector list, is failed to advise
thus can take the decission of retrying/skipping on that VMA.
This patch (of 2):
The process_madvise() system call returns error even after processing some
VMA's passed in the 'struct iovec' vector list which leaves the user
confused to know where to restart the advise next. It is also against
this syscall man page[1] documentation where it mentions that "return
value may be less than the total number of requested bytes, if an error
occurred after some iovec elements were already processed.".
Consider a user passed 10 VMA's in the 'struct iovec' vector list of which
9 are processed but one. Then it just returns the error caused on that
failed VMA despite the first 9 VMA's processed, leaving the user confused
about on which VMA it is failed. Returning the number of bytes processed
here can help the user to know which VMA it is failed on and thus can
retry/skip the advise on that VMA.
The process_madvise() system call is expected to skip holes in vma passed
through 'struct iovec' vector list. But do_madvise, which
process_madvise() calls for each vma, returns ENOMEM in case of unmapped
holes, despite the VMA is processed.
Thus process_madvise() should treat ENOMEM as expected and consider the
VMA passed to as processed and continue processing other vma's in the
vector list. Returning -ENOMEM to user, despite the VMA is processed,
will be unable to figure out where to start the next madvise.
Link: https://lkml.kernel.org/r/4f091776142f2ebf7b94018146de72318474e686.1647008754.git.quic_charante@quicinc.com Fixes: e55f9a58f28e("mm/madvise: introduce process_madvise() syscall: an external memory hinting API") Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.
When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.
Cc: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220221220045.11958-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is caused by when initializing dqi_gqlock, the corresponding dqi_type
and dqi_sb are not properly initialized.
This issue is introduced by commit 435532285323, which wants to avoid
accessing uninitialized variables in error cases. So make global quota
info properly initialized.
Link: https://lkml.kernel.org/r/20220323023644.40084-1-joseph.qi@linux.alibaba.com Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1007141 Fixes: 435532285323 ("ocfs2: quota_local: fix possible uninitialized-variable access in ocfs2_local_read_info()") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Dayvison <sathlerds@gmail.com> Tested-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 18a563db2f47 ("ALSA: hda/realtek - ALC236 headset MIC recording
issue") is to solve recording issue met on AL236, by matching codec
variant ALC269_TYPE_ALC257 and ALC269_TYPE_ALC256.
This match can be too broad and Mi Notebook Pro 2020 is broken by the
patch.
Instead, use codec ID to be narrow down the scope, in order to make
ALC256 unaffected.
syzbot caught a potential deadlock between the PCM
runtime->buffer_mutex and the mm->mmap_lock. It was brought by the
recent fix to cover the racy read/write and other ioctls, and in that
commit, I overlooked a (hopefully only) corner case that may take the
revert lock, namely, the OSS mmap. The OSS mmap operation
exceptionally allows to re-configure the parameters inside the OSS
mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the
copy_from/to_user calls at read/write operations also take the
mm->mmap_lock internally, hence it may lead to a AB/BA deadlock.
A similar problem was already seen in the past and we fixed it with a
refcount (in commit a1113b7e4c10). The former fix covered only the
call paths with OSS read/write and OSS ioctls, while we need to cover
the concurrent access via both ALSA and OSS APIs now.
This patch addresses the problem above by replacing the buffer_mutex
lock in the read/write operations with a refcount similar as we've
used for OSS. The new field, runtime->buffer_accessing, keeps the
number of concurrent read/write operations. Unlike the former
buffer_mutex protection, this protects only around the
copy_from/to_user() calls; the other codes are basically protected by
the PCM stream lock. The refcount can be a negative, meaning blocked
by the ioctls. If a negative value is seen, the read/write aborts
with -EBUSY. In the ioctl side, OTOH, they check this refcount, too,
and set to a negative value for blocking unless it's already being
accessed.
There is a corner case with unsol event handling during codec runtime
suspending state. When the codec runtime suspend call initiated, the
codec->in_pm atomic variable would be 0, currently the codec runtime
suspend function calls snd_hdac_enter_pm() which will just increments
the codec->in_pm atomic variable. Consider unsol event happened just
after this step and before snd_hdac_leave_pm() in the codec runtime
suspend function. The snd_hdac_power_up_pm() in the unsol event
flow in hdmi_present_sense_via_verbs() function would just increment
the codec->in_pm atomic variable without calling pm_runtime_get_sync
function.
As codec runtime suspend flow is already in progress and in parallel
unsol event is also accessing the codec verbs, as soon as codec
suspend flow completes and clocks are switched off before completing
the unsol event handling as both functions doesn't wait for each other.
This will result in below errors
[ 589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching
to polling mode: last cmd=0x505f2f57
[ 589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5,
last cmd=0x505f2f57
[ 589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5,
last cmd=0x505f2f57
To avoid this, the unsol event flow should not perform any codec verb
related operations during RPM_SUSPENDING state.
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
When calling smb2_ioctl_query_info() with invalid
smb_query_info::flags, a NULL ptr dereference is triggered when trying
to kfree() uninitialised rqst[n].rq_iov array.
This also fixes leaked paths that are created in SMB2_open_init()
which required SMB2_open_free() to properly free them.
Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling smb2_ioctl_query_info() with
smb_query_info::flags=PASSTHRU_FSCTL and
smb_query_info::output_buffer_length=0, the following would return
0x10
rather than a valid pointer thus making IS_ERR() check fail. This
would then cause a NULL ptr deference in @buffer when accessing it
later in smb2_ioctl_query_ioctl(). While at it, prevent having a
@buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO
FileEndOfFileInformation requests when
smb_query_info::flags=PASSTHRU_SET_INFO.
Here is a small C reproducer which triggers a NULL ptr in @buffer when
passing an invalid smb_query_info::flags
Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.
In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:
However, because of the change introduced in 73fa349eb8 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.
In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the K210 Standalone SDK Programming guide:
https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf
Section 15.4.3.3:
SPI0 and SPI1 supports: standard, dual, quad and octal transfers.
SPI3 supports: standard, dual and quad transfers (octal is not supported).
In order to support quad transfers (Quad SPI), SPI3 must have four IO wires
connected to the SPI flash.
Update the device tree to specify the correct bus width.
Tested on maix bit, maix dock and maixduino, which all have the same
SPI flash (gd25lq128d) connected to SPI3. maix go is untested, but it
would not make sense for this k210 board to be designed differently.
Today when VFs are put in promiscuous mode, they can request PF
to configure device for them to receive all VLANs traffic regardless
of what vlan is configured by the PF (via ip link) and PF allows this
config request regardless of whether VF is trusted or not.
From security POV, when VLAN is configured for VF through PF (via ip link),
honour such config requests from VF only when they are configured to be
trusted, otherwise restrict such VFs vlan promisc mode config.
Cc: stable@vger.kernel.org Fixes: 54c9a30ebc7d ("qed*: Add support for ndo_set_vf_trust") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This
test does not include the ATA_CMD_NCQ_NON_DATA command as this command
protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and
not as ATA_PROT_NODATA.
To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA
direction, use "!ata_is_data()".
Link: https://lore.kernel.org/r/20220220031810.738362-2-damien.lemoal@opensource.wdc.com Fixes: b9f4659ea9c6 ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA") Cc: stable@vger.kernel.org Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the original FPIN commit, stats were incremented by the event_count.
Event_count is the minimum # of events that must occur before an FPIN is
sent. Thus, its not the actual number of events, and could be significantly
off (too low) as it doesn't reflect anything not reported. Rather than
attempt to count events, have the statistic count how many FPINS cross the
threshold and were reported.
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen, are arguably
unnecessary, so suppress them.
UFS driver messages are changes to from dev_err() to dev_dbg() which means
they will not display unless activated by dynamic debug of building with
-DDEBUG.
sdev->silence_suspend is set to skip messages from sd_suspend_common()
"Synchronizing SCSI cache", "Stopping disk" and scsi_report_sense()
"Power-on or device reset occurred" message (Note, that message appears
when the LUN is accessed after runtime PM, not during runtime PM)
Kernel messages produced during runtime PM can cause a never-ending cycle
because user space utilities (e.g. journald or rsyslog) write the messages
back to storage, causing runtime resume, more messages, and so on.
Messages that tell of things that are expected to happen are arguably
unnecessary, so add a flag to suppress them. This flag is used by the UFS
driver.
v2.6.34 commit d48f50e31fa4 ("mm: fix mbind vma merge problem") introduced
vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it
put a "continue" to next vma where its precedents go to update flags on
current vma before advancing: that left vma with the wrong setting in the
infamous vma_merge() case 8.
v3.10 commit 3c7f93d1c555 ("mm: merging memory blocks resets mempolicy")
tried to fix that in vma_adjust(), without fully understanding the issue.
v3.11 commit f7c9de66a4b3 ("mm: mempolicy: fix mbind_range() &&
vma_adjust() interaction") reverted that, and went about the fix in the
right way, but chose to optimize out an unnecessary mpol_dup() with a
prior mpol_equal() test. But on tmpfs, that also pessimized out the vital
call to its ->set_policy(), leaving the new mbind unenforced.
The user visible effect was that the pages got allocated on the local
node (happened to be 0), after the mbind() caller had specifically
asked for them to be allocated on node 1. There was not any page
migration involved in the case reported: the pages simply got allocated
on the wrong node.
Just delete that optimization now (though it could be made conditional on
vma not having a set_policy). Also remove the "next" variable: it turned
out to be blameless, but also pointless.
Sometimes the page offlining code can leave behind a hwpoisoned clean
page cache page. This can lead to programs being killed over and over
and over again as they fault in the hwpoisoned page, get killed, and
then get re-spawned by whatever wanted to run them.
This is particularly embarrassing when the page was offlined due to
having too many corrected memory errors. Now we are killing tasks due
to them trying to access memory that probably isn't even corrupted.
This problem can be avoided by invalidating the page from the page fault
handler, which already has a branch for dealing with these kinds of
pages. With this patch we simply pretend the page fault was successful
if the page was invalidated, return to userspace, incur another page
fault, read in the file from disk (to a new memory page), and then
everything works again.
Link: https://lkml.kernel.org/r/20220212213740.423efcea@imladris.surriel.com Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn
is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining
memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is
not enough room for ZONE_MOVABLE on that node.
Unfortunately this condition is not checked for. This leads to
zone_movable_pfn[] getting set to a pfn greater than the last pfn in a
node.
calculate_node_totalpages() then sets zone->present_pages to be greater
than zone->spanned_pages which is invalid, as spanned_pages represents
the maximum number of pages in a zone assuming no holes.
Subsequently it is possible free_area_init_core() will observe a zone of
size zero with present pages. In this case it will skip setting up the
zone, including the initialisation of free_lists[].
However populated_zone() checks zone->present_pages to see if a zone has
memory available. This is used by iterators such as
walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the
free_list of each zone in each node, which are assumed to be initialised
due to the zone not being empty.
As free_area_init_core() never initialised the free_lists[] this results
in the following kernel crash when trying to read /proc/pagetypeinfo:
Fix this by checking that the aligned zone_movable_pfn[] does not exceed
the end of the node, and if it does skip creating a movable zone on this
node.
Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com Fixes: b773eb8babd5 ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error is returned in jffs2_scan_eraseblock() and some memory
has been added to the jffs2_summary *s, we can observe the following
kmemleak report:
Therefore, we should call jffs2_sum_reset_collected(s) on exit to
release the memory added in s. In addition, a new tag "out_buf" is
added to prevent the NULL pointer reference caused by s being NULL.
(thanks to Zhang Yi for this analysis)
Fixes: e5d9cbb2252f ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org
Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we mount a jffs2 image, assume that the first few blocks of
the image are normal and contain at least one xattr-related inode,
but the next block is abnormal. As a result, an error is returned
in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then
called in jffs2_build_filesystem() and then again in
jffs2_do_fill_super().
Finally we can observe the following report:
==================================================================
BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
Read of size 8 at addr ffff8881243384e0 by task mount/719
The buggy address belongs to the object at ffff8881243384b8
which belongs to the cache jffs2_xattr_ref of size 48
The buggy address is located 40 bytes inside of
48-byte region [ffff8881243384b8, ffff8881243384e8)
[...]
==================================================================
The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------
An error is returned in jffs2_do_mount_fs(). If the error is returned
by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to
be executed. If the error is returned by jffs2_build_filesystem(), the
jffs2_clear_xattr_subsystem() also does not need to be executed again.
So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root'
to fix this UAF problem.
Fixes: f87ad0cfea1f ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: ffa5f743af83 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.
Fixes: d2d8b7f06569 ("can: m_can: update to support CAN FD features") Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Reported-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com Fixes: 07edeffafb68 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Cc: stable@vger.kernel.org Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By working with external hardware ECC engines, we figured out that
Under certain circumstances, it is needed for the SPI controller to
check INT_TX_EMPTY and INT_RX_NOT_EMPTY in both receive and transmit
path (not only in the receive path). The delay penalty being
negligible, move this code in the common path.
Fixes: 751cfe1b97a9 ("spi: Add MXIC controller driver") Cc: stable@vger.kernel.org Suggested-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-10-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when
CONFIG_WERROR is enabled. The following error is generated:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array
subscript 255 is above array bounds of ‘struct pps_pin[4]’
[-Werror=array-bounds]
400 | ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while
referencing ‘pins’
75 | struct pps_pin pins[BNXT_MAX_TSIO_PINS];
| ^~~~
cc1: all warnings being treated as errors
This is due to the function ptp_find_pin() returning a pin ID of -1 when
a valid pin is not found and this error never being checked.
Change the TSIO_PIN_VALID() function to also check that a pin ID is not
negative and use this macro in bnxt_ptp_enable() to check the result of
the calls to ptp_find_pin() to return an error early for invalid pins.
This fixes the compilation error.
Cc: <stable@vger.kernel.org> Fixes: bb2d392b1cbb ("bnxt_en: 1PPS functions to configure TSIO pins") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220328062708.207079-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer. This
has to be put in error paths to avoid leak during re-probing.
Fixes: d8941e1639dd ("pinctrl: samsung: Match pin banks with their device nodes") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220111201426.326777-2-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / kernel.git / log