[Why & How]
Port of a change that went into DCN314 to keep the PHY enabled
when we have a connected and active DP display.
The PHY can hang if PHY refclk is disabled inadvertently.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[WHY]
All of pipes will be used when the MPC split enable on the dcn
which just has 2 pipes. Then MPO enter will trigger the minimal
transition which need programe dcn from 2 pipes MPC split to 2
pipes MPO. This action will cause lag if happen frequently.
[HOW]
Disable the MPC split for the platform which dcn resource is limited
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Up until now, amdgpu was silently degrading to vsync when
user-space requested an async flip but the hardware didn't support
it.
The hardware doesn't support immediate flips when the update changes
the FB pitch, the DCC state, the rotation, enables or disables CRTCs
or planes, etc. This is reflected in the dm_crtc_state.update_type
field: UPDATE_TYPE_FAST means that immediate flip is supported.
Silently degrading async flips to vsync is not the expected behavior
from a uAPI point-of-view. Xorg expects async flips to fail if
unsupported, to be able to fall back to a blit. i915 already behaves
this way.
This patch aligns amdgpu with uAPI expectations and returns a failure
when an async flip is not possible.
Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dmt_mode is allocated and never freed in this function.
It was found with the ast driver, but most drivers using generic fbdev
setup are probably affected.
In below thousands of screen rotation loop tests with virtual display
enabled, a CPU hard lockup issue may happen, leading system to unresponsive
and crash.
do {
xrandr --output Virtual --rotate inverted
xrandr --output Virtual --rotate right
xrandr --output Virtual --rotate left
xrandr --output Virtual --rotate normal
} while (1);
NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
So CPU1 stucks in hrtimer_cancel as timer callback is running endless on
current clock base, as that timer queue on CPU2 has no chance to finish it
because of failing to hold the lock. So NMI watchdog will throw the errors
after its threshold, and all later CPUs are impacted/blocked.
So use hrtimer_try_to_cancel to fix this, as disable_vblank callback
does not need to wait the handler to finish. And also it's not necessary
to check the return value of hrtimer_try_to_cancel, because even if it's
-1 which means current timer callback is running, it will be reprogrammed
in hrtimer_start with calling enable_vblank to make it works.
v2: only re-arm timer when vblank is enabled (Christian) and add a Fixes
tag as well
v3: drop warn printing (Christian)
v4: drop superfluous check of blank->enabled in timer function, as it's
guaranteed in drm_handle_vblank (Christian)
Fixes: 84ec374bd580 ("drm/amdgpu: create amdgpu_vkms (v4)") Cc: stable@vger.kernel.org Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently dma_resv_get_fences() will leak the previously
allocated array if the fence iteration got restarted and
the krealloc_array() fails.
Free the old array by hand, and make sure we still clear
the returned *fences so the caller won't end up accessing
freed memory. Some (but not all) of the callers of
dma_resv_get_fences() seem to still trawl through the
array even when dma_resv_get_fences() failed. And let's
zero out *num_fences as well for good measure.
Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Christian König <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Fixes: d3c80698c9f5 ("dma-buf: use new iterator in dma_resv_get_fences v3") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230713194745.1751-1-ville.syrjala@linux.intel.com Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.
not ok 373 3992 - Add ct action triggering DNAT tuple conflict
Could not match regex pattern. Verify command output:
cat: /proc/net/nf_conntrack: No such file or directory
It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.
The gs_usb driver handles USB devices with more than 1 CAN channel.
The RX path for all channels share the same bulk endpoint (the
transmitted bulk data encodes the channel number). These per-device
resources are allocated and submitted by the first opened channel.
During this allocation, the resources are either released immediately
in case of a failure or the URBs are anchored. All anchored URBs are
finally killed with gs_usb_disconnect().
Currently, gs_can_open() returns with an error if the allocation of a
URB or a buffer fails. However, if usb_submit_urb() fails, the driver
continues with the URBs submitted so far, even if no URBs were
successfully submitted.
Treat every error as fatal and free all allocated resources
immediately.
Switch to goto-style error handling, to prepare the driver for more
per-device resource allocation.
The mcp251xfd controller needs an idle bus to enter 'Normal CAN 2.0
mode' or . The maximum length of a CAN frame is 736 bits (64 data
bytes, CAN-FD, EFF mode, worst case bit stuffing and interframe
spacing). For low bit rates like 10 kbit/s the arbitrarily chosen
MCP251XFD_POLL_TIMEOUT_US of 1 ms is too small.
Otherwise during polling for the CAN controller to enter 'Normal CAN
2.0 mode' the timeout limit is exceeded and the configuration fails
with:
| $ ip link set dev can1 up type can bitrate 10000
| [ 731.911072] mcp251xfd spi2.1 can1: Controller failed to enter mode CAN 2.0 Mode (6) and stays in Configuration Mode (4) (con=0x068b0760, osc=0x00000468).
| [ 731.927192] mcp251xfd spi2.1 can1: CRC read error at address 0x0e0c (length=4, data=00 00 00 00, CRC=0x0000) retrying.
| [ 731.938101] A link change request failed with some changes committed already. Interface can1 may have been left with an inconsistent configuration, please check.
| RTNETLINK answers: Connection timed out
Make MCP251XFD_POLL_TIMEOUT_US timeout calculation dynamic. Use
maximum of 1ms and bit time of 1 full 64 data bytes CAN-FD frame in
EFF mode, worst case bit stuffing and interframe spacing at the
current bit rate.
For easier backporting define the macro MCP251XFD_FRAME_LEN_MAX_BITS
that holds the max frame length in bits, which is 736. This can be
replaced by can_frame_bits(true, true, true, true, CANFD_MAX_DLEN) in
a cleanup patch later.
Fixes: 55e5b97f003e8 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Fedor Ross <fedor.ross@ifm.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230717-mcp251xfd-fix-increase-poll-timeout-v5-1-06600f34c684@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we reconfigure the SVE vector length we discard the backing storage
for the SVE vectors and then reallocate on next SVE use, leaving the SME
specific state alone. This means that we do not enable SME traps if they
were already disabled. That means that userspace code can enter streaming
mode without trapping, putting the task in a state where if we try to save
the state of the task we will fault.
Since the ABI does not specify that changing the SVE vector length disturbs
SME state, and since SVE code may not be aware of SME code in the process,
we shouldn't simply discard any ZA state. Instead immediately reallocate
the storage for SVE, and disable SME if we change the SVE vector length
while there is no SME state active.
Disabling SME traps on SVE vector length changes would make the overall
code more complex since we would have a state where we have valid SME state
stored but might get a SME trap.
Fixes: 9e4ab6c89109 ("arm64/sme: Implement vector length configuration prctl()s") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230720-arm64-fix-sve-sme-vl-change-v2-1-8eea06b82d57@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.
This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.
Since commit 241d2fb56a18 ("of: Make OF framebuffer device names unique"),
as spotted by Frédéric Bonnard, the historical "of-display" device is
gone: the updated logic creates "of-display.0" instead, then as many
"of-display.N" as required.
This means that offb no longer finds the expected device, which prevents
the Debian Installer from setting up its interface, at least on ppc64el.
Fix this by keeping "of-display" for the first device and "of-display.N"
for subsequent devices.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217328 Link: https://bugs.debian.org/1033058 Fixes: 241d2fb56a18 ("of: Make OF framebuffer device names unique") Cc: stable@vger.kernel.org Cc: Cyril Brulebois <cyril@debamax.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Acked-by: Helge Deller <deller@gmx.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Michal Suchánek <msuchanek@suse.de> Link: https://lore.kernel.org/r/20230710174007.2291013-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When problems were noticed with the register address not being taken
into account when limiting raw transfers with I2C devices we fixed this
in the core. Unfortunately it has subsequently been realised that a lot
of buses were relying on the prior behaviour, partly due to unclear
documentation not making it obvious what was intended in the core. This
is all more involved to fix than is sensible for a fix commit so let's
just drop the original fixes, a separate commit will fix the originally
observed problem in an I2C specific way
Fixes: 3981514180c9 ("regmap: Account for register length when chunking") Fixes: c8e796895e23 ("regmap: spi-avmm: Fix regmap_bus max_raw_write") Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.
Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.
When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:
not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds
The timeout had been introduced 3 years ago, see the Fixes commit below.
This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.
The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.
The reproducer is running a balance and a cancel or pause in parallel.
The way balance finishes is a bit wonky, if we were paused we need to
save the balance_ctl in the fs_info, but clear it otherwise and cleanup.
However we rely on the return values being specific errors, or having a
cancel request or no pause request. If balance completes and returns 0,
but we have a pause or cancel request we won't do the appropriate
cleanup, and then the next time we try to start a balance we'll trip
this ASSERT.
The error handling is just wrong here, we always want to clean up,
unless we got -ECANCELLED and we set the appropriate pause flag in the
exclusive op. With this patch the reproducer ran for an hour without
tripping, previously it would trip in less than a few minutes.
Reported-by: syzbot+c0f3acf145cb465426d5@syzkaller.appspotmail.com CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fuse shouldn't return ENOSYS from its ioctl implementation. If userspace
responds with ENOSYS it should be translated to ENOTTY.
There are two ways to return an error from the IOCTL request:
- fuse_out_header.error
- fuse_ioctl_out.result
Commit 02c0cab8e734 ("fuse: ioctl: translate ENOSYS") already fixed this
issue for the first case, but missed the second case. This patch fixes the
second case.
At exclude_super_stripes(), if we happen to find a block group that has
super blocks mapped to it and we are on a zoned filesystem, we error out
as this is not supposed to happen, indicating either a bug or maybe some
memory corruption for example. However we are exiting the function without
freeing the memory allocated for the logical address of the super blocks.
Fix this by freeing the logical address.
Fixes: 12659251ca5d ("btrfs: implement log-structured superblock for ZONED mode") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This happens because during btrfs_cont_expand we'll get a page, set it
as mapped, and if it's not Uptodate we'll read it. However between the
read and re-locking the page we could have called release_folio() on the
page, but left the page in the file mapping. release_folio() can clear
the page private, and thus further down we blow up when we go to modify
the subpage bits.
Fix this by putting the set_page_extent_mapped() after the read. This
is safe because read_folio() will call set_page_extent_mapped() before
it does the read, and then if we clear page private but leave it on the
mapping we're completely safe re-setting set_page_extent_mapped(). With
this patch I can now run generic/476 without panicing.
CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is just a safety precaution to avoid checking flags on memory that was
initialized on the user space side. libfuse zeroes struct fuse_init_out
outarg, but this is not guranteed to be done in all implementations.
Better is to act on flags and to only apply flags2 when FUSE_INIT_EXT is
set.
There is a risk with this change, though - it might break existing user
space libraries, which are already using flags2 without setting
FUSE_INIT_EXT.
The corresponding libfuse patch is here
https://github.com/libfuse/libfuse/pull/662
If the LOOKUP request triggered from fuse_dentry_revalidate() is
interrupted, then the dentry will be invalidated, possibly resulting in
submounts being unmounted.
The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.
So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT).
Fixes: 81f7eb00ff5b ("btrfs: destroy qgroup extent records on transaction abort") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When making a DNS query inside the kernel using dns_query(), the request
code can in rare cases end up creating a duplicate index key in the
assoc_array of the destination keyring. It is eventually found by
a BUG_ON() check in the assoc_array implementation and results in
a crash.
The situation occurs as follows:
* Some kernel facility invokes dns_query() to resolve a hostname, for
example, "abcdef". The function registers its global DNS resolver
cache as current->cred.thread_keyring and passes the query to
request_key_net() -> request_key_tag() -> request_key_and_link().
* Function request_key_and_link() creates a keyring_search_context
object. Its match_data.cmp method gets set via a call to
type->match_preparse() (resolves to dns_resolver_match_preparse()) to
dns_resolver_cmp().
* Function request_key_and_link() continues and invokes
search_process_keyrings_rcu() which returns that a given key was not
found. The control is then passed to request_key_and_link() ->
construct_alloc_key().
* Concurrently to that, a second task similarly makes a DNS query for
"abcdef." and its result gets inserted into the DNS resolver cache.
* Back on the first task, function construct_alloc_key() first runs
__key_link_begin() to determine an assoc_array_edit operation to
insert a new key. Index keys in the array are compared exactly as-is,
using keyring_compare_object(). The operation finds that "abcdef" is
not yet present in the destination keyring.
* Function construct_alloc_key() continues and checks if a given key is
already present on some keyring by again calling
search_process_keyrings_rcu(). This search is done using
dns_resolver_cmp() and "abcdef" gets matched with now present key
"abcdef.".
* The found key is linked on the destination keyring by calling
__key_link() and using the previously calculated assoc_array_edit
operation. This inserts the "abcdef." key in the array but creates
a duplicity because the same index key is already present.
Fix the problem by postponing __key_link_begin() in
construct_alloc_key() until an actual key which should be linked into
the destination keyring is determined.
[jarkko@kernel.org: added a fixes tag and cc to stable] Cc: stable@vger.kernel.org # v5.3+ Fixes: df593ee23e05 ("keys: Hoist locking out of __key_link_begin()") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reviewed-by: Joey Lee <jlee@suse.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the node limit of the root node so that the last pivot of all nodes is
the node limit (if the node is not full).
This patch also fixes a bug in mas_rev_awalk(). Effectively, always
setting a maximum makes mas_logical_pivot() behave as mas_safe_pivot().
Without this fix, it is possible that very small tasks would fail to find
the correct gap. Although this has not been observed with real tasks, it
has been reported to happen in m68k nommu running the maple tree tests.
The HP Laptop 15s-eq2xxx uses ALC236 codec and controls the mute LED using
COEF 0x07 index 1. No existing quirk covers this configuration.
Adds a new quirk and enables it for the device.
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Reported-by: Joseph C. Sible <josephcsible@gmail.com> Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/ Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
io-wq assumes that an issue is blocking, but it may not be if the
request type has asked for a non-blocking attempt. If we get
-EAGAIN for that case, then we need to treat it as a final result
and not retry or arm poll for it.
Add a fix for the Zen2 VZEROUPPER data corruption bug where under
certain circumstances executing VZEROUPPER can cause register
corruption or leak data.
The optimal fix is through microcode but in the case the proper
microcode revision has not been applied, enable a fallback fix using
a chicken bit.
Change ndo_set_mac_address to dev_set_mac_address because
dev_set_mac_address provides a way to notify network layer about MAC
change. In other case, services may not aware about MAC change and keep
using old one which set from network adapter driver.
As example, DHCP client from systemd do not update MAC address without
notification from net subsystem which leads to the problem with acquiring
the right address from DHCP server.
Fixes: cb10c7c0dfd9e ("net/ncsi: Add NCSI Broadcom OEM command") Cc: stable@vger.kernel.org # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the one Get Mac Address function for all manufacturers and change
this call in handlers accordingly.
Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The trouble is that the drm_dev_unplugged() checks are by design racy,
they do not synchronize against all outstanding ioctl. This is because
those ioctl could block forever (both for modeset and for driver
specific ioctls), leading to deadlocks in hotunplug. Instead the code
sections that touch the hardware need to be annotated with
drm_dev_enter/exit, to avoid accessing hardware resources after the
unload/remove has finished.
To avoid use-after-free issues all the involved userspace visible
objects are supposed to hold a reference on the underlying drm_device,
like drm_file does.
The issue now is that we missed one, the atomic modeset ioctl can be run
in a nonblocking fashion, and in that case it cannot rely on the implied
drm_device reference provided by the ioctl calling context. This can
result in a use-after-free if an nonblocking atomic commit is carefully
raced against a driver unload.
Fix this by unconditionally grabbing a drm_device reference for any
drm_atomic_state structures. Strictly speaking this isn't required for
blocking commits and TEST_ONLY calls, but it's the simpler approach.
Thanks to shanzhulig for the initial idea of grabbing an unconditional
reference, I just added comments, a condensed commit message and fixed a
minor potential issue in where exactly we drop the final reference.
Reported-by: shanzhulig <shanzhulig@gmail.com> Suggested-by: shanzhulig <shanzhulig@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: stable@kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb_memblock_alloc() calls memblock_alloc(), which calls
(__init) memblock_alloc_try_nid(). However, swiotlb_membloc_alloc()
can be marked as __init since it is only called by swiotlb_init_remap(),
which is already marked as __init. This prevents a modpost build
warning/error:
Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") missed
converting one place accessing cop0 registers, which results in a build
error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled.
Fixes: e4de20576986 ("MIPS: KVM: Fix NULL pointer dereference") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This loop will exit successfully when "found" is false or in the failure
case it times out with "wait_iter" set to -1. The test for timeouts is
impossible as is.
Fixes: b843adde8d49 ("scsi: qla2xxx: Fix mem access after free") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/cea5a62f-b873-4347-8f8e-c67527ced8d2@kili.mountain Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Klocwork reported warning of NULL pointer may be dereferenced. The routine
exits when sa_ctl is NULL and fcport is allocated after the exit call thus
causing NULL fcport pointer to dereference at the time of exit.
To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL.
System crash, where driver is accessing scsi layer's
memory (scsi_cmnd->device->host) to search for a well known internal
pointer (vha). The scsi_cmnd was released back to upper layer which
could be freed, but the driver is still accessing it.
Remove access of freed memory. Currently the driver was checking to see if
scsi_done was called by seeing if the sp->type has changed. Instead,
check to see if the command has left the oustanding_cmds[] array as
sign of scsi_done was called.
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed.
Task management command failed with status 2Ch which is
a result of too many task management commands sent
to the same target. Hence limit task management commands
to 8 per target.
Task management cmd failed with status 30h which means
FW is not able to finish processing one task management
before another task management for the same lun.
Hence add wait for completion of marker to space it out.
When users register an event the name of the event and it's argument are
checked to ensure they match if the event already exists. Normally all
arguments are in the form of "type name", except for when the type
starts with "struct ". In those cases, the size of the struct is passed
in addition to the name, IE: "struct my_struct a 20" for an argument
that is of type "struct my_struct" with a field name of "a" and has the
size of 20 bytes.
The current code does not honor the above case properly when comparing
a match. This causes the event register to fail even when the same
string was used for events that contain a struct argument within them.
The example above "struct my_struct a 20" generates a match string of
"struct my_struct a" omitting the size field.
Add the struct size of the existing field when generating a comparison
string for a struct field to ensure proper match checking.
Link: https://lkml.kernel.org/r/20230629235049.581-2-beaub@linux.microsoft.com Cc: stable@vger.kernel.org Fixes: e6f89a149872 ("tracing/user_events: Ensure user provided strings are safely formatted") Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to update dynamic data counter ('dyndata') and max length ('maxlen')
only if the fetcharg uses the dynamic data. Also get out arg->dynamic
from unlikely(). This makes dynamic data address wrong if
process_fetch_insn() returns error on !arg->dynamic case.
Fix not to count the error code (which is minus value) to the total
used length of array, because it can mess up the return code of
process_fetch_insn_bottom(). Also clear the 'ret' value because it
will be used for calculating next data_loc entry.
When using pm_nl_ctl to validate userspace path-manager's behaviours, it
was failing on 32-bit architectures ~half of the time.
pm_nl_ctl was not reporting any error but the command was not doing what
it was expected to do. As a result, the expected linked event was not
triggered after and the test failed.
This is due to the fact the token given in argument to the application
was parsed as an integer with atoi(): in a 32-bit arch, if the number
was bigger than INT_MAX, 2147483647 was used instead.
This can simply be fixed by using strtoul() instead of atoi().
The errors have been seen "by chance" when manually looking at the
results from LKFT.
Fixes: 9a0b36509df0 ("selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCE") Cc: stable@vger.kernel.org Fixes: ecd2a77d672f ("selftests: mptcp: support MPTCP_PM_CMD_REMOVE") Fixes: cf8d0a6dfd64 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATE") Fixes: 57cc361b8d38 ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROY") Fixes: ca188a25d43f ("selftests: mptcp: userspace PM support for MP_PRIO signals") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.
Some CIs don't have this config option enabled and this is causing
issues in the tests:
# ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory
# [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected
There is no impact in the results but the test is not doing what it is
supposed to do.
Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an error was detected when checking the marks, a message was
correctly printed mentioning the error but followed by another one
saying everything was OK and the selftest was not marked as failed as
expected.
Now the 'ret' variable is directly set to 1 in order to make sure the
exit is done with an error, similar to what is done in other functions.
While at it, the error is correctly propagated to the caller.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of "external" errors when preparing the environment for the
TProxy tests, the subtests were marked as skipped.
This is fine but it means these errors are ignored. On MPTCP Public CI,
we do want to catch such issues and mark the selftest as failed if there
are such issues. We can then use mptcp_lib_fail_if_expected_feature()
helper that has been recently added to fail if needed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix an issue in function 'tracing_err_log_open'.
The function doesn't call 'seq_open' if the file is opened only with
write permissions, which results in 'file->private_data' being left as null.
If we then use 'lseek' on that opened file, 'seq_lseek' dereferences
'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic.
Writing to this node requires root privileges, therefore this bug
has very little security impact.
Tracefs node: /sys/kernel/tracing/error_log
Example Kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
Call trace:
mutex_lock+0x30/0x110
seq_lseek+0x34/0xb8
__arm64_sys_lseek+0x6c/0xb8
invoke_syscall+0x58/0x13c
el0_svc_common+0xc4/0x10c
do_el0_svc+0x24/0x98
el0_svc+0x24/0x88
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1b4/0x1b8
Code: d503201faa0803e0aa1f03e1aa0103e9 (c8e97d02)
---[ end trace 561d1b49c12cf8a5 ]---
Kernel panic - not syncing: Oops: Fatal exception
Ensure running fprobe_exit_handler() has finished before
calling rethook_free() in the unregister_fprobe() so that caller can free
the fprobe right after unregister_fprobe().
unregister_fprobe() ensured that all running fprobe_entry/exit_handler()
have finished by calling unregister_ftrace_function() which synchronizes
RCU. But commit 5f81018753df ("fprobe: Release rethook after the ftrace_ops
is unregistered") changed to call rethook_free() after
unregister_ftrace_function(). So call rethook_stop() to make rethook
disabled before unregister_ftrace_function() and ensure it again.
Here is the possible code flow that can call the exit handler after
unregister_fprobe().
------
CPU1 CPU2
call unregister_fprobe(fp)
...
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == fprobe_exit_handler
call fprobe_exit_handler()
rethook_free():
set rh->handler = NULL;
return from unreigster_fprobe;
call fp->exit_handler() <- (*)
------
(*) At this point, the exit handler is called after returning from
unregister_fprobe().
This fixes it as following;
------
CPU1 CPU2
call unregister_fprobe()
...
rethook_stop():
set rh->handler = NULL;
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == NULL
return from rethook
rethook_free()
return from unreigster_fprobe;
------
Link: https://lore.kernel.org/all/168873859949.156157.13039240432299335849.stgit@devnote2/ Fixes: 5f81018753df ("fprobe: Release rethook after the ftrace_ops is unregistered") Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
state->period/duty are of type u64, and if their value is greater than
UINT_MAX, then the cast to uint will cause problems. Fix this by
changing the type of the respective local variables to u64.
I don't see a reason why we should treat the case lo < hi differently
and return 0 as period and duty_cycle. The current logic was added with c375bcbaabdb ("pwm: meson: Read the full hardware state in
meson_pwm_get_state()"), Martin as original author doesn't remember why
it was implemented this way back then.
So let's handle it as normal use case and also remove the optimization
for lo == 0. I think the improved readability is worth it.
Fixes: c375bcbaabdb ("pwm: meson: Read the full hardware state in meson_pwm_get_state()") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8d36694245f2 ("PM: QoS: Add check to make sure CPU freq is
non-negative") makes sure CPU freq is non-negative to avoid negative
value converting to unsigned data type. However, when the value is
PM_QOS_DEFAULT_VALUE, pm_qos_update_target specifically uses
c->default_value which is set to FREQ_QOS_MIN/MAX_DEFAULT_VALUE when
cpufreq_policy_alloc is executed, for this case handling.
Adding check for PM_QOS_DEFAULT_VALUE to let default setting work will
fix this problem.
On SPR, the load latency event needs an auxiliary event in the same
group to work properly. There's a check in intel_pmu_hw_config()
for this to iterate sibling events and find a mem-loads-aux event.
The for_each_sibling_event() has a lockdep assert to make sure if it
disabled hardirq or hold leader->ctx->mutex. This works well if the
given event has a separate leader event since perf_try_init_event()
grabs the leader->ctx->mutex to protect the sibling list. But it can
cause a problem when the event itself is a leader since the event is
not initialized yet and there's no ctx for the event.
Actually I got a lockdep warning when I run the below command on SPR,
but I guess it could be a NULL pointer dereference.
split_if_spec expects a NULL-pointer as an end marker for the argument
list, but tuntap_probe never supplied that terminating NULL. As a result
incorrectly formatted interface specification string may cause a crash
because of the random memory access. Fix that by adding NULL terminator
to the split_if_spec argument list.
Cc: stable@vger.kernel.org Fixes: 7282bee78798 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 8") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If defer close timeout value is set to 0, then there is no
need to include files in the deferred close list and utilize
the delayed worker for closing. Instead, we can close them
immediately.
Signed-off-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel platforms such as Sapphire Rapids and Raptor Lake don't support
dynamic pcie lane or speed switching.
This limitation seems to carry over from one generation to another.
To be safer, disable dynamic pcie lane width and speed switching when
running on an Intel platform.
As comments in ftrace_process_locs(), there may be NULL pointers in
mcount_loc section:
> Some architecture linkers will pad between
> the different mcount_loc sections of different
> object files to satisfy alignments.
> Skip any NULL pointers.
After commit 20e5227e9f55 ("ftrace: allow NULL pointers in mcount_loc"),
NULL pointers will be accounted when allocating ftrace pages but skipped
before adding into ftrace pages, this may result in some pages not being
used. Then after commit 706c81f87f84 ("ftrace: Remove extra helper
functions"), warning may occur at:
WARN_ON(pg->next);
To fix it, only warn for case that no pointers skipped but pages not used
up, then free those unused pages after releasing ftrace_lock.
Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 706c81f87f84 ("ftrace: Remove extra helper functions") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:
tracing_read_pipe() {
... ...
waitagain:
tracing_wait_pipe() // 1. find non-empty buffer here
trace_find_next_entry_inc() // 2. loop here try to find an entry
__find_next_entry()
ring_buffer_empty_cpu(); // 3. find non-empty buffer
peek_next_entry() // 4. but peek always return NULL
ring_buffer_peek()
rb_buffer_peek()
rb_get_reader_page()
// 5. because rb_num_of_entries() == 0 always true here
// then return NULL
// 6. user buffer not been filled so goto 'waitgain'
// and eventually leads to an deadloop in kernel!!!
}
By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.
To fix it, we need to clear every pages in rb_reset_cpu().
The ENA adapters on our instances occasionally reset. Once recently
logged a UBSAN failure to console in the process:
UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
Workqueue: ena ena_fw_reset_device [ena]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
? __const_udelay+0x43/0x50
ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
wait_for_reset_state+0x54/0xa0 [ena]
ena_com_dev_reset+0xc8/0x110 [ena]
ena_down+0x3fe/0x480 [ena]
ena_destroy_device+0xeb/0xf0 [ena]
ena_fw_reset_device+0x30/0x50 [ena]
process_one_work+0x22b/0x3d0
worker_thread+0x4d/0x3f0
? process_one_work+0x3d0/0x3d0
kthread+0x12a/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.
Looking at the code, the current timeout is capped at 5000us. Using a
base value of 100us, the current code will overflow after (1<<29). Even
at values before 32, this function wraps around, perhaps
unintentionally.
Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future.
When allocating the 2D array for handling IRQ type registers in
regmap_add_irq_chip_fwnode(), the intent is to allocate a matrix
with num_config_bases rows and num_config_regs columns.
This is currently handled by allocating a buffer to hold a pointer for
each row (i.e. num_config_bases). After that, the logic attempts to
allocate the memory required to hold the register configuration for
each row. However, instead of doing this allocation for each row
(i.e. num_config_bases allocations), the logic erroneously does this
allocation num_config_regs number of times.
This scenario can lead to out-of-bounds accesses when num_config_regs
is greater than num_config_bases. Fix this by updating the terminating
condition of the loop that allocates the memory for holding the register
configuration to allocate memory only for each row in the matrix.
Amit Pundir reported a crash that was occurring on his db845c device
due to memory corruption (see "Closes" tag for Amit's report). The KASAN
report below helped narrow it down to this issue:
[ 14.033877][ T1] ==================================================================
[ 14.042507][ T1] BUG: KASAN: invalid-access in regmap_add_irq_chip_fwnode+0x594/0x1364
[ 14.050796][ T1] Write of size 8 at addr 06ffff8081021850 by task init/1
[ 14.242004][ T1] The buggy address belongs to the object at ffffff8081021850
[ 14.242004][ T1] which belongs to the cache kmalloc-8 of size 8
[ 14.255669][ T1] The buggy address is located 0 bytes inside of
[ 14.255669][ T1] 8-byte region [ffffff8081021850, ffffff8081021858)
Fixes: faa87ce9196d ("regmap-irq: Introduce config registers for irq types") Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/all/CAMi1Hd04mu6JojT3y6wyN2YeVkPR5R3qnkKJ8iR8if_YByCn4w@mail.gmail.com/ Tested-by: John Stultz <jstultz@google.com> Tested-by: Amit Pundir <amit.pundir@linaro.org> # tested on Dragonboard 845c Cc: stable@vger.kernel.org # v6.0+ Cc: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Isaac J. Manjarres" <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20230711193059.2480971-1-isaacmanjarres@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 096b52fd2bb4 ("perf: RISC-V: throttle perf events") the
perf_sample_event_took() function was added to report time spent in
overflow interrupts. If the interrupt takes too long, the perf framework
will lower the sysctl_perf_event_sample_rate and max_samples_per_tick.
When hwc->interrupts is larger than max_samples_per_tick, the
hwc->interrupts will be set to MAX_INTERRUPTS, and events will be
throttled within the __perf_event_account_interrupt() function.
However, the RISC-V PMU driver doesn't call riscv_pmu_stop() to update the
PERF_HES_STOPPED flag after perf_event_overflow() in pmu_sbi_ovf_handler()
function to avoid throttling. When the perf framework unthrottled the event
in the timer interrupt handler, it triggers riscv_pmu_start() function
and causes a WARN_ON_ONCE() warning, as shown below:
After referring other PMU drivers like Arm, Loongarch, Csky, and Mips,
they don't call *_pmu_stop() to update with PERF_HES_STOPPED flag
after perf_event_overflow() function nor do they add PERF_HES_STOPPED
flag checking in *_pmu_start() which don't cause this warning.
Thus, it's recommended to remove this unnecessary check in
riscv_pmu_start() function to prevent this warning.
The ftrace-direct-too sample traces the handle_mm_fault function whose
signature changed since the introduction of the sample. Since:
commit bce617edecad ("mm: do page fault accounting in handle_mm_fault")
handle_mm_fault now has 4 arguments. Therefore, the sample trampoline
should save 4 argument registers.
s390 saves all argument registers already so it does not need a change
but x86_64 needs an extra push and pop.
This also evolves the signature of the tracing function to make it
mirror the signature of the traced function.
Link: https://lkml.kernel.org/r/20230427140700.625241-2-revest@chromium.org Cc: stable@vger.kernel.org Fixes: bce617edecad ("mm: do page fault accounting in handle_mm_fault") Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While duplicate IDs are still very harmful, including the potential to easily
see changing devices in /dev/disk/by-id, it turn out they are extremely
common for cheap end user NVMe devices.
Relax our check for them for so that it doesn't reject the probe on
single-ported PCIe devices, but prints a big warning instead. In doubt
we'd still like to see quirk entries to disable the potential for
changing supposed stable device identifier links, but this will at least
allow users how have two (or more) of these devices to use them without
having to manually add a new PCI ID entry with the quirk through sysfs or
by patching the kernel.
Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique") Cc: stable@vger.kernel.org # 6.0+ Co-developed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.
To fix it, free 'iter->temp' in tracing_release_pipe().
Link: https://lore.kernel.org/linux-trace-kernel/20230713141435.1133021-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: ff895103a84ab ("tracing: Save off entry when peeking at next entry") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so
We hit the bug because when second hist trigger has was created
has_hist_vars() returned false because hist trigger did not have
variables. As a result of that save_hist_vars() was not called to add
the trigger to trace_array->hist_vars. Later on when we attempted to
remove the first histogram find_any_var_ref() failed to detect it is
being used because it did not find the second trigger in hist_vars list.
With this change we wait until trigger actions are created so we can take
into consideration if hist trigger has variable references. Also, now we
check the return value of save_hist_vars() and fail trigger creation if
save_hist_vars() fails.
Add a NULL check for the 'bdev' parameter of
dm_verity_loadpin_is_bdev_trusted(). The function is called
by loadpin_check(), which passes the block device that
corresponds to the super block of the file system from which
a file is being loaded. Generally a super_block structure has
an associated block device, however that is not always the
case (e.g. tmpfs).
Nathan Chancellor reported a kernel build error on Fedora 39:
$ clang --version | head -1
clang version 16.0.5 (Fedora 16.0.5-1.fc39)
$ s390x-linux-gnu-ld --version | head -1
GNU ld version 2.40-1.fc39
$ make -skj"$(nproc)" ARCH=s390 CC=clang CROSS_COMPILE=s390x-linux-gnu- olddefconfig all
s390x-linux-gnu-ld: arch/s390/boot/startup.o(.text+0x5b4): misaligned symbol `_decompressor_end' (0x35b0f) for relocation R_390_PC32DBL
make[3]: *** [.../arch/s390/boot/Makefile:78: arch/s390/boot/vmlinux] Error 1
It turned out that the problem with misaligned symbols on s390 was fixed
with commit 80ddf5ce1c92 ("s390: always build relocatable kernel") for the
kernel image, but did not take into account that the decompressor uses its
own set of CFLAGS, which come without -fPIE.
Add the -fPIE flag also to the decompresser CFLAGS to fix this.
The IXP4XX_EXP_T1_MASK was shifted one bit to the right, overlapping
IXP4XX_EXP_T2_MASK and leaving bit 29 unused. The offset being wrong is
also confirmed at least by the datasheet of IXP45X/46X [1].
Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in 1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.
In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.
Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.
Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") Cc: stable <stable@kernel.org> Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14),
however we index it starting from 1, not 0, to match real port numbers.
This can lead to writing port config past 'pconfig' bounds and
overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by
smatch:
When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns
-EPROBE_DEFER, the opp_table is freed again, to wait until all the
interconnect paths are available.
However, if the OPP table is using required-opps then it may already
have been added to the global lazy_opp_tables list. The error path
does not remove the opp_table from the list again.
This can cause crashes later when the provider of the required-opps
is added, since we will iterate over OPP tables that have already been
freed. E.g.:
Unable to handle kernel NULL pointer dereference when read
CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3
PC is at _of_add_opp_table_v2 (include/linux/of.h:949
drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404
drivers/opp/of.c:1032) -> lazy_link_required_opp_table()
Fix this by calling _of_clear_opp_table() to remove the opp_table from
the list and clear other allocated resources. While at it, also add the
missing mutex_destroy() calls in the error path.
According to the datasheets of supported meson SoCs length of ADC_CLK_DIV
field is 6-bit. Although all supported SoCs have the register
with that field documented later SoCs use external clock rather than
ADC internal clock so this patch affects only meson8 family (S8* SoCs).
Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: George Stark <GNStark@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some ZHAOXIN xHCI controllers follow usb3.1 spec, but only support
gen1 speed 5Gbps. While in Linux kernel, if xHCI suspport usb3.1,
root hub speed will show on 10Gbps.
To fix this issue of ZHAOXIN xHCI platforms, read usb speed ID
supported by xHCI to determine root hub speed. And add a quirk
XHCI_ZHAOXIN_HOST for this issue.
On some ZHAOXIN hosts, xHCI will prefetch TRB for performance
improvement. However this TRB prefetch mechanism may cross page boundary,
which may access memory not allocated by xHCI driver. In order to fix
this issue, two pages was allocated for a segment and only the first
page will be used. And add a quirk XHCI_ZHAOXIN_TRB_FETCH for this issue.
On ZHAOXIN ZX-100 project, xHCI can't work normally after resume
from system Sx state. To fix this issue, when resume from system
Sx state, reinitialize xHCI instead of restore.
So, Add XHCI_RESET_ON_RESUME quirk for ZX-100 to fix issue of
resuming from system Sx state.
projects / kernel.git / log