[Why&How]
If the timing generator isnt running, it does not make sense to trigger
a sync on the corresponding OTG. Check this condition before starting.
Otherwise, this will cause error like:
*ERROR* GSL: Timeout on reset trigger!
Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ NOTE: This is also 5f9f97c02dd2 ("drm/amd/display: trigger timing sync
only if TG is running") ] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable") CC: Alvin Lee <Alvin.Lee2@amd.com> CC: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Description]
- If we fail validation, we should retain the phantom
stream/planes
- Full updates assume that phantom pipes will be fully
removed, but if validation fails we keep the phantom
pipes
- Therefore we have to retain the plane/stream if validation
fails (since the refcount is decremented before validation,
and the expectation is that it's fully freed when the old
dc_state is released)
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Description]
- Need to disable phantom OTG after it's enabled
in order to restore it to it's original state.
- If it's enabled and then an MCLK switch comes in
we may not prefetch the correct data since the phantom
OTG could already be in the middle of the frame.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sub-viewport (Subvp) feature is used for changing MCLK without causing
any display artifact, requiring special treatment from the plane and
stream perspective since DC needs to read data from the cache when using
subvp. However, the function dc_commit_updates_for_stream does not
provide all the support needed by this feature which will make this
function legacy at some point. For this reason, this commit enables
dc_update_planes_and_stream for ASICs that support this feature but
preserves the old behavior for other ASICs. However,
dc_update_planes_and_stream should replace dc_commit_updates_for_stream
for all ASICs since it does most of the tasks executed by
dc_commit_updates_for_stream with other extra operations, but we need to
run tests before making this change.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ODM to combine on the eDP panel with ABM causes the color difference to
the panel since the ABM module only sets one pipe. Hence, this commit
blocks ABM in case of ODM combined on eDP.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OTG instance is not updated in dc_commit_state_no_check for newly
committed streams because mode_change is not set. Notice that OTG update
is part of the software state, and after hardware programming, it must
be updated; for this reason, this commit updates the OTG offset right
after hardware programming.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A seamless boot stream has hardware resources assigned to it, and adding
a new stream means rebuilding the current assignment. It is desirable to
avoid this situation since it may cause light-up issues on the VGA
monitor on USB-C. This commit swaps the seamless boot stream to pipe 0
(if necessary) to ensure that the pipe context matches.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DC stream can be seen as a representation of the DCN backend or the data
struct that represents the center of the display pipeline. The front end
(i.e., planes) is connected to the DC stream, and in its turn, streams
are connected to the DC link. Due to this dynamic, DC must handle the
following scenarios:
1. A stream is removed;
2. A new stream is created;
3. An unchanged stream had some updates on its planes.
These combinations require that the new stream data struct become
updated and has a valid global state. For handling multiple corner cases
associated with stream operations, this commit introduces a function
dedicated to manipulating stream changes and invokes the state
validation function after that.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An intentional delay is added on soft ctf triggered. Then there will
be a double check for the GPU temperature before taking further
action. This can avoid unintended shutdown due to temperature
momentary fluctuation.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Hand-modified because:
* XCP support added to amdgpu.h in kernel 6.5
and is not necessary for this fix.
* SMU microcode initialization moved in 32806038aa76 ("drm/amd: Load SMU microcode during early_init") ] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2779 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable peak profiling mode shader/memory clock reporting for powerplay
framework.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable peak profiling mode shader/memory clocks reporting for swsmu
framework.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer(). Previously,
nilfs_evict_inode() could cause use-after-free read for nilfs_root if
inodes are left in "garbage_list" and released by nilfs_dispose_list at
the end of nilfs_detach_log_writer(), and this bug was fixed by commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in
nilfs_evict_inode()").
However, it turned out that there is another possibility of UAF in the
call path where mark_inode_dirty_sync() is called from iput():
This can happen after commit 0ae45f63d4ef ("vfs: add support for a
lazytime mount option"), which changed iput() to call
mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME
flag and i_nlink is non-zero.
This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty
data after degenerating to read-only") when using the syzbot reproducer,
but the issue has potentially existed before.
Fix this issue by adding a "purging flag" to the nilfs structure, setting
that flag while disposing the "garbage_list" and checking it in
__nilfs_mark_inode_dirty().
Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root
in nilfs_evict_inode()"), this patch does not rely on ns_writer to
determine whether to skip operations, so as not to break recovery on
mount. The nilfs_salvage_orphan_logs routine dirties the buffer of
salvaged data before attaching the log writer, so changing
__nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL
will cause recovery write to fail. The purpose of using the cleanup-only
flag is to allow for narrowing of such conditions.
Link: https://lkml.kernel.org/r/20230728191318.33047-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+74db8b3087f293d3a13a@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/000000000000b4e906060113fd63@google.com Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> # 4.0+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the pthread allocation for each array item is based on the size
of a pthread_t pointer and should be the size of the pthread_t structure,
so the allocation is under-allocating the correct size. Fix this by using
the size of each element in the pthreads array.
Static analysis cppcheck reported:
tools/testing/radix-tree/regression1.c:180:2: warning: Size of pointer
'threads' used instead of size of its data. [pointerSize]
Link: https://lkml.kernel.org/r/20230727160930.632674-1-colin.i.king@gmail.com Fixes: 1366c37ed84b ("radix tree test harness") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory. When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.
Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected. This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens. It's a trade-off for now.
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter") Cc: <stable@vger.kernel.org> # 6.4.y Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some users have reported flickerng with S/G display. We've
tried extensively to reproduce and debug the issue on a wide
variety of platform configurations (DRAM bandwidth, etc.) and
a variety of monitors, but so far have not been able to. We
disabled S/G display on a number of platforms to address this
but that leads to failure to pin framebuffers errors and
blank displays when there is memory pressure or no displays
at all on systems with limited carveout (e.g., Chromebooks).
Add a option to disable this as a debugging option as a
way for users to disable this, depending on their use case,
and for us to help debug this further.
v2: fix typo
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513
This is the same approach followed by DCN2 drivers where the issue is
not present.
Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dma-buf backend is supposed to provide its own vm_ops, but some
implementation just have nothing special to do and leave vm_ops
untouched, probably expecting this field to be zero initialized (this
is the case with the system_heap implementation for instance).
Let's reset vma->vm_ops to NULL to keep things working with these
implementations.
Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: <stable@vger.kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230724112610.60974-1-boris.brezillon@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.
Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.
Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.
We have a lurking bug where Fragment Shader Helper Invocations can't load
from memory. But this is actually required in OpenGL and is causing random
hangs or failures in random shaders.
It is unknown how widespread this issue is, but shaders hitting this can
end up with infinite loops.
We enable those only on all Kepler and newer GPUs where we use our own
Firmware.
Nvidia's firmware provides a way to set a kernelspace controlled list of
mmio registers in the gr space from push buffers via MME macros.
v2: drop code for gm200 and newer.
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: nouveau@lists.freedesktop.org Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230622152017.2512101-1-kherbst@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Samsung PM9B1 512G SSD found in some Lenovo Yoga 7 14ARB7 laptop units
reports eui as 0001000200030004 when resuming from s2idle, causing the
device to be removed with this error in dmesg:
nvme nvme0: identifiers changed for nsid 1
To fix this, add a quirk to ignore namespace identifiers for this device.
Signed-off-by: August Wikerfors <git@augustwikerfors.se> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Section 2.1 of the Platform Specification [1] states:
Unless otherwise specified by a given I/O device, I/O devices are on
ordering channel 0 (i.e., they are point-to-point strongly ordered).
which is not sufficient to guarantee that a readX() by a hart completes
before a subsequent delay() on the same hart (cf. memory-barriers.txt,
"Kernel I/O barrier effects").
Set the I(nput) bit in __io_ar() to restore the ordering, align inline
comments.
When initrd is loaded low, the secondary kernel fails like this:
INITRD: 0xdc581000+0x00eef000 overlaps in-use memory region
This initrd load address corresponds to the _end symbol, but the
reservation is aligned on PMD_SIZE, as explained by a comment in
setup_bootmem().
It is technically possible to align the initrd load address accordingly,
leaving a hole between the end of kernel and the initrd, but it is much
simpler to allocate the initrd top-down.
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.
Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.
Cc: stable@vger.kernel.org Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.
Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().
That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mptcp_join 'implicit EP' test currently fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
Error: too many addresses or duplicate one: -22.
ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '
This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
times in iproute output, and does not account for a final whitespace
in it.
This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.
mptcp_join 'delete and re-add' test fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
002 delete and re-add before delete[ ok ]
mptcp_info subflows=1 [ ok ]
Error: argument "ADDRESS" is wrong: invalid for non-zero id address
after delete[fail] got 2:2 subflows expected 1
This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:
"When used with the delete id operation, an IFADDR is only included when
the ID is 0."
This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.
The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.
As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.
Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).
Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...
Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> Cc: stable@vger.kernel.org Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Conversion from big-endian to native is done in a common function
mmc_app_send_scr(). Converting in moxart_transfer_pio() is extra.
Double conversion on a LE system returns an incorrect SCR value,
leads to errors:
mmc0: unrecognised SCR structure version 8
Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230627120549.2400325-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.
Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test uses the 'TROUTE6' environment variable to encode the name of
the IPv6 traceroute utility. By default (without a configuration file),
this variable is not set, resulting in failures:
# ./ip6_forward_instats_vrf.sh
TEST: ping6 [ OK ]
TEST: Ip6InTooBigErrors [ OK ]
TEST: Ip6InHdrErrors [FAIL]
TEST: Ip6InAddrErrors [ OK ]
TEST: Ip6InDiscards [ OK ]
Fix by setting a default utility name and skip the test if the utility
is not present.
Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RX full flags are raised if certain types of RX FIFO are full, and then
drop all following MPDU of AMPDU. In order to resume to receive MPDU
when RX FIFO becomes available, we clear the register bits by the
commit a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC"). But, 8852AE
needs more settings to support this. To quickly fix disconnection problem,
revert the behavior as before.
Fixes: a0d99ebb3ecd ("wifi: rtw89: initialize DMA of CMAC") Reported-by: Damian B <bronecki.damian@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217710 Cc: <Stable@vger.kernel.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Damian B <bronecki.damian@gmail.com> Link: https://lore.kernel.org/r/20230808005426.5327-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.
Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.
Fix this by checking for a maximum of 255 elements in attrs.
Cc: stable@vger.kernel.org Fixes: dc1e3cb8da8b ("nl80211: MBSSID and EMA support in AP mode") Signed-off-by: Keith Yeo <keithyjy@gmail.com> Link: https://lore.kernel.org/r/20230731034719.77206-1-keithyjy@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A KVM guest using SEV-ES or SEV-SNP with multiple vCPUs can trigger
a double fetch race condition vulnerability and invoke the VMGEXIT
handler recursively.
sev_handle_vmgexit() maps the GHCB page using kvm_vcpu_map() and then
fetches the exit code using ghcb_get_sw_exit_code(). Soon after,
sev_es_validate_vmgexit() fetches the exit code again. Since the GHCB
page is shared with the guest, the guest is able to quickly swap the
values with another vCPU and hence bypass the validation. One vmexit code
that can be rejected by sev_es_validate_vmgexit() is SVM_EXIT_VMGEXIT;
if sev_handle_vmgexit() observes it in the second fetch, the call
to svm_invoke_exit_handler() will invoke sev_handle_vmgexit() again
recursively.
To avoid the race, always fetch the GHCB data from the places where
sev_es_sync_from_ghcb stores it.
Exploiting recursions on linux kernel has been proven feasible
in the past, but the impact is mitigated by stack guard pages
(CONFIG_VMAP_STACK). Still, if an attacker manages to call the handler
multiple times, they can theoretically trigger a stack overflow and
cause a denial-of-service, or potentially guest-to-host escape in kernel
configurations without stack guard pages.
Note that winning the race reliably in every iteration is very tricky
due to the very tight window of the fetches; depending on the compiler
settings, they are often consecutive because of optimization and inlining.
Tested by booting an SEV-ES RHEL9 guest.
Fixes: CVE-2023-4155 Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Cc: stable@vger.kernel.org Reported-by: Andy Nguyen <theflow@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validation of the GHCB is susceptible to time-of-check/time-of-use vulnerabilities.
To avoid them, we would like to always snapshot the fields that are read in
sev_es_validate_vmgexit(), and not use the GHCB anymore after it returns.
This means:
- invoking sev_es_sync_from_ghcb() before any GHCB access, including before
sev_es_validate_vmgexit()
- snapshotting all fields including the valid bitmap and the sw_scratch field,
which are currently not caching anywhere.
The valid bitmap is the first thing to be copied out of the GHCB; then,
further accesses will use the copy in svm->sev_es.
Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21598 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands.
Cc: stable@vger.kernel.org Fixes: 2b9b8f3b68ed ("ksmbd: validate command payload size") Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Long Li <leo.lilong@huawei.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TPM RNG functionality is not necessary for entropy when the CPU
already supports the RDRAND instruction. The TPM RNG functionality
was previously disabled on a subset of AMD fTPM series, but reports
continue to show problems on some systems causing stutter root caused
to TPM RNG functionality.
Expand disabling TPM RNG use for all AMD fTPMs whether they have versions
that claim to have fixed or not. To accomplish this, move the detection
into part of the TPM CRB registration and add a flag indicating that
the TPM should opt-out of registration to hwrng.
Cc: stable@vger.kernel.org # 6.1.y+ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Reported-by: daniil.stas@posteo.net Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719 Reported-by: bitlord0xff@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Gunter reports:
Building loongarch:defconfig ... failed
--------------
Error log:
<stdin>:569:2: warning: #warning syscall fstat not implemented [-Wcpp]
arch/loongarch/kernel/setup.c: In function 'arch_cpu_finalize_init':
arch/loongarch/kernel/setup.c:86:9: error: implicit declaration of function 'alternative_instructions'
Actually introduced in v6.1.44 with commit 08e86d42e2c9 ("loongarch/cpu:
Switch to arch_cpu_finalize_init()"). Alternative instruction support
was only introduced for loongarch in v6.2 with commit 19e5eb15b00c
("LoongArch: Add alternative runtime patching mechanism").
Under certain circumstances, an integer division by 0 which faults, can
leave stale quotient data from a previous division operation on Zen1
microarchitectures.
Do a dummy division 0/1 before returning from the #DE exception handler
in order to avoid any leaks of potentially sensitive data.
Use the generic term fw_reserved_memory for FW reserve region. This
region may also hold discovery TMR in addition to other reserve
regions. This region size could be larger than discovery tmr size, hence
don't change the discovery tmr size based on this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ This change fixes reading IP discovery from debugfs.
It needed to be hand modified because:
* GC 9.4.3 support isn't introduced in older kernels until 228ce176434b ("drm/amdgpu: Handle VRAM dependencies on GFXIP9.4.3")
* It also changed because of 58ab2c08d708 (drm/amdgpu: use VRAM|GTT
for a bunch of kernel allocations) not being present. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2748 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the "domain" argument to amdgpu_bo_create_kernel_at() since this
function takes an "offset" argument which is the offset off of VRAM, and as
such allocation always takes place in VRAM. Thus, the "domain" argument is
unnecessary.
Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: AMD Graphics <amd-gfx@lists.freedesktop.org> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move TMR region from top of FB to 2MB for FFBM, so we need to
reserve TMR region firstly to make sure TMR can be allocated at 2MB
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Systems which implement SME without also implementing SVE are
architecturally valid but were not initially supported by the kernel,
unfortunately we missed one issue in the ptrace code.
The SVE register setting code is shared between SVE and streaming mode
SVE. When we set full SVE register state we currently enable TIF_SVE
unconditionally, in the case where streaming SVE is being configured on a
system that supports vanilla SVE this is not an issue since we always
initialise enough state for both vector lengths but on a system which only
support SME it will result in us attempting to restore the SVE vector
length after having set streaming SVE registers.
Fix this by making the enabling of SVE conditional on setting SVE vector
state. If we set streaming SVE state and SVE was not already enabled this
will result in a SVE access trap on next use of normal SVE, this will cause
us to flush our register state but this is fine since the only way to
trigger a SVE access trap would be to exit streaming mode which will cause
the in register state to be flushed anyway.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-1-49df214bfb3e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[Fix up backport -- broonie] Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
exfat_extract_uni_name copies characters from a given file name entry into
the 'uniname' variable. This variable is actually defined on the stack of
the exfat_readdir() function. According to the definition of
the 'exfat_uni_name' type, the file name should be limited 255 characters
(+ null teminator space), but the exfat_get_uniname_from_ext_entry()
function can write more characters because there is no check if filename
entries exceeds max filename length. This patch add the check not to copy
filename characters when exceeding max filename length.
The root cause is race condition as below:
- since it tries to remount rw filesystem, so that do_remount won't
call sb_prepare_remount_readonly to block fallocate, there may be race
condition in between remount and fallocate.
- in f2fs_remount(), default_options() will reset mount option to default
one, and then update it based on result of parse_options(), so there is
a hole which race condition can happen.
Thread A Thread B
- f2fs_fill_super
- parse_options
- clear_opt(READ_EXTENT_CACHE)
Some minor modifications to flush_merge and related parameters:
1.The FLUSH_MERGE opt is set by default only in non-ro mode.
2.When ro and merge are set at the same time, an error is reported.
3.Display noflush_merge mount opt.
Suggested-by: Chao Yu <chao@kernel.org> Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 458c15dfbce6 ("f2fs: don't reset unchangable mount option in f2fs_remount()") Signed-off-by: Sasha Levin <sashal@kernel.org>
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35") Cc: Aaron Lewis <aaronlewis@google.com> Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
Some dock and mst monitor don't like to receive CLEAR_PAYLOAD_ID_TABLE
when mst_en is set to 0. It doesn't make sense to do so in source
side, either.
[How]
Don't send CLEAR_PAYLOAD_ID_TABLE if mst_en is 0
Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ 6.1.y doesn't have the file rename from 54618888d1ea7 ("drm/amd/display: break down dc_link.c") ] Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function dc_update_planes_and_stream handles multiple cases where DC
needs to remove and add planes in the commit tail phase. After Linux
started to use this function, some of the IGT kms_plane started to fail;
one good example to illustrate why the new sequence regressed IGT is the
subtest plane-position-hole which has the following diagram as a
template:
IGT expects image (a) as the final result of two plane compositions as
described in figure (b). After the migration to the new sequence, the
last plane order is changed, and DC generates the following image:
Notice that the generated image by DC is different because the small
square that should be composed on top of the primary plane is below the
primary plane. For this reason, the CRC will mismatch with the expected
value. Since the function dc_add_all_planes_for_stream re-append all the
new planes back to the dc_validation_set, this commit ensures that the
original sequence is maintained. After this change, all CI tests in all
ASICs start to pass again.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Suggested-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When hactive is not aligned to 8 pixels, it is aligned accordingly and
hfront porch needs to be reduced the same amount. Unfortunately the front
porch is set to the difference rather than reducing it. There are some
Samsung TVs which can't cope with a front porch of instead of 70.
altmap->free includes the entire free space from which altmap blocks
can be allocated. So when checking whether the kernel is doing altmap
block free, compute the boundary correctly, otherwise memory hotunplug
can fail.
Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable") Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses.
Currently, read/write_page_hwecc() and read/write_page_raw() are not
aligned: there is a mismatch in the OOB bytes which are not
read/written at the same offset in both cases (raw vs. hwecc).
This is a real problem when relying on the presence of the Page
Addresses (PA) when using the NAND chip as a boot device, as the
BootROM expects additional data in the OOB area at specific locations.
Rockchip boot blocks are written per 4 x 512 byte sectors per page.
Each page with boot blocks must have a page address (PA) pointer in OOB
to the next page. Pages are written in a pattern depending on the NAND chip ID.
Generate boot block page address and pattern for hwecc in user space
and copy PA data to/from the already reserved last 4 bytes before ECC
in the chip->oob_poi data layout.
Align the different helpers. This change breaks existing jffs2 users.
Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/5e782c08-862b-51ae-47ff-3299940928ca@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Rockchip boot blocks are written per 4 x 512 byte sectors per page.
Each page with boot blocks must have a page address (PA) pointer in OOB
to the next page.
The currently advertised free OOB area starts at offset 6, like
if 4 PA bytes were located right after the BBM. This is wrong as the
PA bytes are located right before the ECC bytes.
Fix the layout by allowing access to all bytes between the BBM and the
PA bytes instead of reserving 4 bytes right after the BBM.
This change breaks existing jffs2 users.
Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/d202f12d-188c-20e8-f2c2-9cc874ad4d22@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It's racy to read ->cached_cq_tail without taking proper measures
(usually grabbing ->completion_lock) as timeout requests with CQE
offsets do, however they have never had a good semantics for from
when they start counting. Annotate racy reads with data_race().
BUG: KASAN: slab-use-after-free in f2fs_truncate_data_blocks_range+0x122a/0x14c0 fs/f2fs/file.c:574
Read of size 4 at addr ffff88802a25c000 by task syz-executor148/5000
The root cause is, inodeA references inodeB via inodeB's ino, once inodeA
is truncated, it calls truncate_dnode() to truncate data blocks in inodeB's
node page, it traverse mapping data from node->i.i_addr[0] to
node->i.i_addr[ADDRS_PER_BLOCK() - 1], result in out-of-boundary access.
This patch fixes to add sanity check on dnode page in truncate_dnode(),
so that, it can help to avoid triggering such issue, and once it encounters
such issue, it will record newly introduced ERROR_INVALID_NODE_REFERENCE
error into superblock, later fsck can detect such issue and try repairing.
Also, it removes f2fs_truncate_data_blocks() for cleanup due to the
function has only one caller, and uses f2fs_truncate_data_blocks_range()
instead.
At add_new_free_space() we have these BUG_ON()'s that are there to deal
with any failure to add free space to the in memory free space cache.
Such failures are mostly -ENOMEM that should be very rare. However there's
no need to have these BUG_ON()'s, we can just return any error to the
caller and all callers and their upper call chain are already dealing with
errors.
So just make add_new_free_space() return any errors, while removing the
BUG_ON()'s, and returning the total amount of added free space to an
optional u64 pointer argument.
Reported-by: syzbot+3ba856e07b7127889d8c@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000e9cb8305ff4e8327@google.com/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ext2 has fields in superblock reserved for subblock allocation support.
However that never landed. Drop the many years dead code.
Reported-by: syzbot+af5e10f73dbff48f70af@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reconfigure / remount code takes a lot of effort to protect
filesystem's reconfiguration code from racing writes on remounting
read-only. However during remounting read-only filesystem to read-write
mode userspace writes can start immediately once we clear SB_RDONLY
flag. This is inconvenient for example for ext4 because we need to do
some writes to the filesystem (such as preparation of quota files)
before we can take userspace writes so we are clearing SB_RDONLY flag
before we are fully ready to accept userpace writes and syzbot has found
a way to exploit this [1]. Also as far as I'm reading the code
the filesystem remount code was protected from racing writes in the
legacy mount path by the mount's MNT_READONLY flag so this is relatively
new problem. It is actually fairly easy to protect remount read-write
from racing writes using sb->s_readonly_remount flag so let's just do
that instead of having to workaround these races in the filesystem code.
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230615113848.8439-1-jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.
The fix is simply to add such a check.
Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.
==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276
The buggy address belongs to the object at ffff888104617800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
1024-byte region [ffff888104617800, ffff888104617c00)
Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng. Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1:
obj_stock_flush_required mm/memcontrol.c:3319 [inline]
drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361
try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703
try_charge mm/memcontrol.c:2837 [inline]
mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290
sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025
sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525
udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692
udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817
sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668
__sys_setsockopt+0x1c3/0x230 net/socket.c:2271
__do_sys_setsockopt net/socket.c:2282 [inline]
__se_sys_setsockopt net/socket.c:2279 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2279
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffff8881382d52c0 -> 0xffff888138893740
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g534293368afa #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses to
stock->cached_objcg.
In commit 20ea1e7d13c1 ("file: always lock position for
FMODE_ATOMIC_POS") we ended up always taking the file pos lock, because
pidfd_getfd() could get a reference to the file even when it didn't have
an elevated file count due to threading of other sharing cases.
But Mateusz Guzik reports that the extra locking is actually measurable,
so let's re-introduce the optimization, and only force the locking for
directory traversal.
Directories need the lock for correctness reasons, while regular files
only need it for "POSIX semantics". Since pidfd_getfd() is about
debuggers etc special things that are _way_ outside of POSIX, we can
relax the rules for that case.
The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.
Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/clk/imx/clk-imx93.c:294 imx93_clocks_probe() error: uninitialized symbol 'base'.
Indeed, in case of an error, the wrong (yet uninitialized) variable is
converted to an error code and returned.
Fix this by propagating the error code in the correct variable.
Fixes: e02ba11b45764705 ("clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/9c2acd81-3ad8-485d-819e-9e4201277831@kadam.mountain Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202306161533.4YDmL22b-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230711150812.3562221-1-geert+renesas@glider.be Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the 'NV' definition postfix that is supposed to be INV.
Take the chance to also order properly the registers based on
their address and call the GEN12_GFX_CCS_AUX_INV address as
GEN12_CCS_AUX_INV like all the other similar registers.
Remove also VD1, VD3 and VE1 registers that don't exist and add
BCS0 and CCS0.
Infinite waits for completion of GPU activity have been observed in CI,
mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or
igt@perf@stress-open-close. Root cause analysis, based of ftrace dumps
generated with a lot of extra trace_printk() calls added to the code,
revealed loops of request dependencies being accidentally built,
preventing the requests from being processed, each waiting for completion
of another one's activity.
After we substitute a new request for a last active one tracked on a
timeline, we set up a dependency of our new request to wait on completion
of current activity of that previous one. While doing that, we must take
care of keeping the old request still in memory until we use its
attributes for setting up that await dependency, or we can happen to set
up the await dependency on an unrelated request that already reuses the
memory previously allocated to the old one, already released. Combined
with perf adding consecutive kernel context remote requests to different
user context timelines, unresolvable loops of await dependencies can be
built, leading do infinite waits.
We obtain a pointer to the previous request to wait upon when we
substitute it with a pointer to our new request in an active tracker,
e.g. in intel_timeline.last_request. In some processing paths we protect
that old request from being freed before we use it by getting a reference
to it under RCU protection, but in others, e.g. __i915_request_commit()
-> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(),
we don't. But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU,
that RCU protection is not sufficient against reuse of memory.
We could protect i915_request's memory from being prematurely reused by
calling its release function via call_rcu() and using rcu_read_lock()
consequently, as proposed in v1. However, that approach leads to
significant (up to 10 times) increase of SLAB utilization by i915_request
SLAB cache. Another potential approach is to take a reference to the
previous active fence.
When updating an active fence tracker, we first lock the new fence,
substitute a pointer of the current active fence with the new one, then we
lock the substituted fence. With this approach, there is a time window
after the substitution and before the lock when the request can be
concurrently released by an interrupt handler and its memory reused, then
we may happen to lock and return a new, unrelated request.
Always get a reference to the current active fence first, before
replacing it with a new one. Having it protected from premature release
and reuse, lock it and then replace with the new one but only if not
yet signalled via a potential concurrent interrupt nor replaced with
another one by a potential concurrent thread, otherwise retry, starting
from getting a reference to the new current one. Adjust users to not
get a reference to the previous active fence themselves and always put the
reference got by __i915_active_fence_set() when no longer needed.
v3: Fix lockdep splat reports and other issues caused by incorrect use of
try_cmpxchg() (use (cmpxchg() != prev) instead)
v2: Protect request's memory by getting a reference to it in favor of
delegating its release to call_rcu() (Chris)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211 Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself") Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.6+ Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230720093543.832147-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 946e047a3d88d46d15b5c5af0414098e12b243f7) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.
Currently we guard FPSIMD/SVE state conversions with a check for the system
supporting SVE but SME only systems may need to sync streaming mode SVE
state so add a check for SME support too. These functions are only used
by the ptrace code.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-2-49df214bfb3e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When setting SME vector lengths we clear TIF_SME to reenable SME traps,
doing a reallocation of the backing storage on next use. We do this using
clear_thread_flag() which operates on the current thread, meaning that when
setting the vector length via ptrace we may both not force traps for the
target task and force a spurious flush of any SME state that the tracing
task may have.
Clear the flag in the target task.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-tif-sme-v1-1-88312fd6fbfd@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a function sve_sync_from_fpsimd_zeropad() which is used by the
ptrace code to update the SVE state when the user writes to the the
FPSIMD register set. Currently this checks that the task has SVE
enabled but this will miss updates for tasks which have streaming SVE
enabled if SVE has not been enabled for the thread, also do the
conversion if the task has streaming SVE enabled.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230803-arm64-fix-ptrace-ssve-no-sve-v1-3-49df214bfb3e@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to
call into ftrace are emitted right at function entry. The instruction
sequence used is minimal to reduce overhead. Crucially, a stackframe is
not created for the function being traced. This breaks stack unwinding
since the function being traced does not have a stackframe for itself.
As such, it never shows up in the backtrace:
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
Due to rbd_try_acquire_lock() effectively swallowing all but
EBLOCKLISTED error from rbd_try_lock() ("request lock anyway") and
rbd_request_lock() returning ETIMEDOUT error not only for an actual
notify timeout but also when the lock owner doesn't respond, a busy
loop inside of rbd_acquire_lock() between rbd_try_acquire_lock() and
rbd_request_lock() is possible.
Requesting the lock on EBUSY error (returned by get_lock_owner_info()
if an incompatible lock or invalid lock owner is detected) makes very
little sense. The same goes for ETIMEDOUT error (might pop up pretty
much anywhere if osd_request_timeout option is set) and many others.
Just fail I/O requests on rbd_dev->acquiring_list immediately on any
error from rbd_try_lock().
Cc: stable@vger.kernel.org # 588159009d5b: rbd: retrieve and check lock owner twice before blocklisting Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM.
On DBDC devices the first (internal) phy is only capable of using
2.4 GHz band, and the 5 GHz band is exposed via a separate phy object,
so avoid the false advertising.
Reported-by: Rani Hod <rani.hod@gmail.com> Closes: https://github.com/openwrt/openwrt/pull/12361 Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit 86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit 86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit 66b2c338adce has
no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit 86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit 86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit a096ccca6e50
has no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Pietro Borrello <borrello@diag.uniroma1.it> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Fixes: a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.
However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.
This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:
It is incorrect to calculate number of OOB bytes for ECC engine using
some "already known" ECC step size (1024 bytes here). Number of such
bytes for ECC engine must be whole OOB except 2 bytes for bad block
marker, while proper ECC step size and strength will be selected by
ECC logic.
projects / kernel.git / log