Harvey Hsieh [Wed, 23 Nov 2016 11:13:08 +0000 (19:13 +0800)]
Tegra: support to set the L2 ECC and Parity enable bit
This patch adds capability to read the boot flag to enable L2 ECC
and Parity Protection bit for the Cortex-A57 CPUs. The previous
bootloader sets this flag value for the platform.
Tegra: console clock settings for real/FPGA platforms
This patch sets up the clock for the UART console, for real Silicon
and FPGA platforms. FPGA platforms run the UART clock source at
13MHz, whereas the clock cource runs at 408MHz for real silicon.
Anthony Zhou [Wed, 22 Mar 2017 06:37:04 +0000 (14:37 +0800)]
Tegra: platform: support simulation platforms and MISRA fixes
This patch adds support for simulation platforms as well as
fixes issues flagged by the MISRA scans.
Main MISRA fixes:
* Added explicit casts (e.g. 0U) to integers in order for them to be
compatible with whatever operation they're used in [Rule 10.1]
* Fix return type doesn't match the function type [Rule 10.3]
* Use single return point instead of multiple [Rule 15.5]
* Change return type for the tegra_platform_is_x handlers to bool
Change-Id: I871b7c37b22942f6c0c2049c14cc626d4a24d81c Signed-off-by: Anthony Zhou <anzhou@nvidia.com> Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Ard Biesheuvel [Sat, 29 Dec 2018 18:44:35 +0000 (19:44 +0100)]
plat/synquacer: enable SPM support
Enable the deprecated SPM framework for the SynQuacer platform.
It involves creating a memory layout in secure DRAM, and wiring
up the SPM infrastructure so that the secure partition payload
that is loaded into this region by the SCP firmware is dispatched
appropriately.
Ard Biesheuvel [Sat, 29 Dec 2018 18:40:31 +0000 (19:40 +0100)]
plat/synquacer: enable OP-TEE logic only if SPD_opteed is set
The logic that initializes the BL32 entry point data structure
should only be executed if we are in fact loading OP-TEE, and
not if BL32_BASE is set for other reasons (i.e., when enabling
SPM)
Ard Biesheuvel [Sun, 6 Jan 2019 09:07:24 +0000 (10:07 +0100)]
spm: permit platform to override the VMA placement of the vector table
On some systems, it may be preferred to place the secure EL1/0 vector
table outside of the static placement of the BL31 image itself, for
instance when the latter is located in non-shareable SRAM which does
not tolerate inner shareable WBWA mappings (as is the case on SynQuacer)
So permit the platform to #define SPM_SHIM_EXCEPTIONS_VMA in its
supplementary linker script, in which case it will be used as the
VMA region for the vector table. Note that the LMA does not change,
and it is up to the platform to copy the contents to the right place
at init time.
Ard Biesheuvel [Thu, 3 Jan 2019 11:03:49 +0000 (12:03 +0100)]
services/spm_deprecated: disable alignment checking for S-EL0
Permit unaligned accesses while executing the secure partition
payload, so that we don't have to modify existing code that we
will host there. (The UEFI spec explicitly permits unaligned
accesses)
From now on, platform_def.h must include any header with definitions that
are platform-specific (like arm_def.h) and the included headers mustn't
include back platform_def.h, and shouldn't be used by other files. Only
platform_def.h should be included in other files. This will ensure that all
needed definitions are present, rather than needing to include all the
headers in all the definitions' headers just in case.
This also prevents problems like cyclic dependencies.
Change-Id: I9d3cf4d1de4b956fa035c79545222697acdaf5ca Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Anson Huang [Tue, 15 Jan 2019 06:27:10 +0000 (14:27 +0800)]
imx: make imx uart work for debug mode
With DEBUG_CONSOLE enabled, build will fail for imx8mq platform:
./build/imx8mq/release/bl31/imx8mq_bl31_setup.o:
In function `bl31_early_platform_setup2':
imx8mq_bl31_setup.c:(.text.bl31_early_platform_setup2+0x40):
undefined reference to `console_uart_register'
Makefile:741: recipe for target 'build/imx8mq/release/bl31/bl31.elf' failed
make: *** [build/imx8mq/release/bl31/bl31.elf] Error 1
Besides, the .console_flush callback needs to be added to avoid
panic when debug mode is enabled, since the console_flush() will
call it without checking whether the function callback is valid.
Anson Huang [Tue, 15 Jan 2019 05:53:03 +0000 (13:53 +0800)]
imx: add necessary lpuart console_flush callback for debug
Current lpuart driver does NOT implement .console_flush callback,
if debug console is enabled, the console_flush() will call the
undefined .console_flush callback(NULL) for lpuart and leak to
panic, this patch adds .console_flush callback to make lpuart work
for debug mode.
Paul Beesley [Thu, 10 Jan 2019 16:14:04 +0000 (16:14 +0000)]
doc: Minor readme structure improvements
Improves wording and sentence structure of the readme, including:
- Using "TF-A" in place of "the TF-A" in a couple of places
- "Support for X" in place of "Support X"
- Explicitly naming the Secure Payload Dispatcher when introducing the
SPD acronym.
Change-Id: I4e7b7e7dc6748f631d07c02d97adcca10ae60ea4 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
ARMv8.2-TTCNP is mandatory from ARMv8.2 onwards, but it can be implemented
in CPUs that don't implement all mandatory 8.2 features (and so have to
claim to be a lower version).
This patch removes usage of the ARM_ARCH_AT_LEAST() macro and uses system
ID registers to detect whether it is needed to set the bit or not.
Change-Id: I7bcbf0c7c937590dfc2ca668cfd9267c50f7d52c Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Joel Hutton [Wed, 28 Nov 2018 11:09:24 +0000 (11:09 +0000)]
hikey960: Increase max xlat tables
It is cleaner to use the same number of tables regardless of whether
OP-TEE is used or not. This doesn't result in a significant memory
usage increase.
Change-Id: I38bcaa3f2f197c0a352153117592749f189a265c Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Jolly Shah [Wed, 9 Jan 2019 20:37:57 +0000 (12:37 -0800)]
xilinx: Move IPI functions to common file
pm_service ipi functions can be used by other xilinx
platforms. So move it to common directory. Also change
node_id member type in pm_proc structure so it can be
used for versal where device IDs are used instead of
node IDs.
To accommodate this change header files are re-organized.
Jolly Shah [Mon, 7 Jan 2019 20:53:32 +0000 (12:53 -0800)]
xilinx: pm_service: Rename macros to use generic macro names
ZynqMP pm_service ipi file uses platform specific macros names.
pm_service ipi functions can be used by other Xilinx platforms
also. Make rename macros to use generic names so that it can be
used by common file.
pm_service ipi functions will be moved to common file in next patch.
Jolly Shah [Tue, 8 Jan 2019 19:27:36 +0000 (11:27 -0800)]
xilinx: Remove platform specific dependency from IPI function
ipi_mb function uses platform specific ipi configuration table.
These ipi_mb functions can be used for other Xilinx platform.
So, instead of using direct data structure, initialize IPI
configuration data by passing platform specific ipi table.
Macros are updated accordingly for this ipi table change.
This change is done so that ipi_mb functions can be moved to
common file without major changes. All common functions now would
be moved to common file in next patch.
Jolly Shah [Tue, 8 Jan 2019 19:25:28 +0000 (11:25 -0800)]
xilinx: Move ipi configuration structure definition to header file
Move ipi configuration structure definition to common header file
and rename it to common name, so it can be used for Xilinx specific
other platforms in upcoming changes.
Jolly Shah [Tue, 8 Jan 2019 19:21:29 +0000 (11:21 -0800)]
xilinx: zynqmp: Move zynqmp_ipi.h to include directory
Move zynqmp_ipi.h to platform specific include directory.
Rename it to plat_ipi.h instead of platform name. So, it can
be used to common source files which needs platform specific
data.
Jolly Shah [Tue, 8 Jan 2019 19:10:47 +0000 (11:10 -0800)]
plat: xilinx: zynqmp: Move zynqmp_private.h to include directory
Move zynqmp_private.h to platform specific include directory.
Also, rename it to plat_private.h instead of having platform
name. So, it can be used to common source files which needs
platform specific data.
Joel Hutton [Tue, 8 Jan 2019 15:18:28 +0000 (15:18 +0000)]
juno:Fix CSS_USE_SCMI_SDS_DRIVER=0 configuration
A previous commit 89f2e589856f ("plat/arm: remove weak implemention of
'plat_arm_psci_override_pm_ops' function") introduced a problem with the
CSS_USE_SCMI_SDS_DRIVER configuration. In juno_pm.c the
css_scmi_override_pm_ops function was used regardless of whether the
flag was set. This patch ifdefs the function to restore the original
behaviour.
Change-Id: I508025ba70cf3a9250cc6270c1df209179c37ae7 Signed-off-by: Joel Hutton <Joel.Hutton@Arm.com>
Ard Biesheuvel [Tue, 1 Jan 2019 10:01:41 +0000 (11:01 +0100)]
services/spm_deprecated: permit timer sysreg access at S-EL0
Expose the timer registers that are accessible at EL0 per the
architecture to the SPM payload running in secure EL0. Note
that this requires NS_TIMER_SWITCH to be enable for all users
of this code.
Ard Biesheuvel [Sat, 29 Dec 2018 18:43:21 +0000 (19:43 +0100)]
services/spm_deprecated: update ARM platform specific asserts
Update some asserts that refer to #defines that only occur in
ARM platforms, preventing this code to be used on other platforms.
Instead, use a platform agnostic name, and update all the existing
users.
Marek Vasut [Wed, 26 Dec 2018 14:57:08 +0000 (15:57 +0100)]
rcar_gen3: plat: Fix BL2 size check
Rename BL2_LIMIT to BL2_IMAGE_LIMIT and BL2_SYSRAM_LIMIT to BL2_LIMIT to
correctly set BL2_LIMIT value. Set correct DEVICE_SRAM_BASE to match the
hardware. Use BL2_END in rcar_configure_mmu_el3() to mark the cacheable
BL2 area.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Fix a variable expansion in Arm platform makefiles
The top level makefile defines the PLAT variable, not PLATFORM.
This mistake was causing an empty variable expansion and showing an
incomplete error message.
Soby Mathew [Mon, 7 Jan 2019 14:07:58 +0000 (14:07 +0000)]
plat/arm: Restrict PIE support to FVP
The patch SHA 55cf015c enabled PIE support when RESET_TO_BL31=1 for
all ARM platforms. But it seems n1sdp platform doesn't work with PIE
support yet. Hence restrict the ENABLE_PIE=1 to fvp platform.
Jolly Shah [Fri, 4 Jan 2019 20:03:44 +0000 (12:03 -0800)]
zynqmp: pm: Invalidate several clocks that Linux doesn't need to control
Linux has no reason to use these system and debug clocks and therefore
shouldn't access them. These clocks are marked as invalid in order to
prevent Linux from registering and querying them.
Note that despite clocks being marked as invalid a security issue
still remains in place as there is nothing that prevents the
non-secure world from gating these clocks and that way causing
damage to the system.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Wed, 2 Jan 2019 21:48:19 +0000 (13:48 -0800)]
zynqmp: pm: Add ACPU_FULL and ACPU_HALF clocks in the invalid list
These clocks are marked as invalid in order to prevent Linux from
registering them.
Note that despite clocks being marked as invalid a security issue
still remains in place as there is nothing that prevents the
non-secure world from gating these clocks and that way halt
the whole APU subsystem.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Wed, 2 Jan 2019 21:45:53 +0000 (13:45 -0800)]
zynqmp: pm: Fix model of ACPU clocks
In the existing model for ACPU clock the mux, divider, and gate were
represented as one clock and ACPU_HALF was modelled as child of
ACPU clock. This is not correct. ACPU clock model contains only
mux and the divider, and it has 2 children: ACPU_FULL and ACPU_HALF
clocks which have only gates. The models of ACPU and ACPU_HALF clocks
are fixed and ACPU_FULL clock is added.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Wed, 2 Jan 2019 21:44:25 +0000 (13:44 -0800)]
zynqmp: pm: Reimplement clock get parent EEMI API
Clock get parent EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock set parent API to get pre_src, post_src, div2
and bypasss, in the implementation of pm_clock_get_parent() we need to
workaround this by distinguishing two cases:
1) if the given clock ID corresponds to a PLL-related clock ID (*_PRE_SRC,
*_POST_SRC, *_INT_MUX or *_PLL clock IDs); or
2) given clock ID is truly an on-chip clock.
For case 1) we'll map the call onto PLL-specific EEMI API with the
respective parameter ID. For case 2) the call is passed to the PMU.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Fri, 4 Jan 2019 19:57:40 +0000 (11:57 -0800)]
zynqmp: pm: Reimplement clock set parent EEMI API
Clock set parent EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock set parent API to set pre_src, post_src, div2
and bypass, in the implementation of pm_clock_set_parent() we need to
workaround this by distinguishing two cases:
1) if the given clock ID corresponds to a PLL-related clock ID (*_PRE_SRC,
*_POST_SRC, *_INT_MUX or *PLL clock IDs); or 2) given clock ID is truly
an on-chip clock.
For case 1) we'll map the call onto PLL set parameter EEMI API with the
respective parameter ID. Since clock set parent interface to EL1/2 receives
parent index (mux select value), the value is just passed to PMU.
Functions that appear to be unused after this change is made are removed.
Setting the parent of *PLL clocks, that actually model bypass, is not
possible. This is already ensured by the existing clock model having the
CLK_SET_RATE_NO_REPARENT flag. The API also doesn't allow changing the
bypass parent. Bypass is controlled only by the PMU firmware.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Fri, 4 Jan 2019 19:53:37 +0000 (11:53 -0800)]
zynqmp: pm: Reimplement clock get divider EEMI API
Clock get divider EEMI API is reimplemented to use system-level clock
get divider EEMI API rather than direct MMIO read/write accesses to clock
control registers.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Fri, 4 Jan 2019 19:49:46 +0000 (11:49 -0800)]
zynqmp: pm: Reimplement clock set divider EEMI API
Clock set divider EEMI API is reimplemented to use system-level clock
set divider EEMI API rather than direct MMIO read/write accesses to clock
control registers.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Wed, 2 Jan 2019 20:55:41 +0000 (12:55 -0800)]
zynqmp: pm: Reimplement clock get state (status) EEMI API
Clock get state EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux is_enabled method for PLLs still uses clock get state API
get the PLL state, in the implementation of pm_clock_getstate() we need
to workaround this by distinguishing two cases: 1) if the given clock ID
corresponds to a PLL output clock ID; or 2) given clock ID is truly an
on-chip clock whose state of the gate should be returned.
For case 1) we'll call pm_api_clock_pll_getstate() implemented in
pm_api_clock.h/c. This function will query the PLL state from PMU using
the system-level PLL get mode EEMI API.
For case 2) we'll call the PMU to query the clock gate state using
system-level clock get status EEMI API.
Functions that appear to be unused after this change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Wed, 2 Jan 2019 20:54:40 +0000 (12:54 -0800)]
zynqmp: pm: Reimplement clock disable EEMI API
Clock disable EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock disable API to reset the PLL in the
implementation of pm_clock_disable() we need to workaround this by
distinguishing two cases: 1) if the given clock ID corresponds to a PLL
output clock ID; or 2) given clock ID is truly an on-chip clock that can
be gated.
For case 1) we'll call pm_api_clock_pll_disable() implemented in
pm_api_clock.h/c. This function will reset the PLL using the system-level
PLL set mode EEMI API with the reset mode argument.
For case 2) we'll call the PMU to configure the clock gate. This is done
using system-level clock disable EEMI API.
Functions that appear to be unused after this change is made are removed.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
Jolly Shah [Fri, 4 Jan 2019 19:45:59 +0000 (11:45 -0800)]
zynqmp: pm: Reimplement clock enable EEMI API
Clock enable EEMI API is reimplemented to use system-level clock
and pll EEMI APIs rather than direct MMIO read/write accesses to clock
and pll control registers.
Since linux still uses clock enable API to trigger locking of the PLLs
in the pm_clock_enable() implementation we need to workaround this by
distinguishing two cases: 1) if the given clock ID corresponds to a PLL
output clock ID; or 2) given clock ID is truly an on-chip clock that can
be gated.
For case 1) we'll call pm_api_clock_pll_enable() implemented in
pm_api_clock.h/c. This function checks what is the buffered PLL mode and
calls the system-level PLL set mode EEMI API with the buffered mode value
specified as argument. Long term, if linux driver get fixed to use PLL
EEMI API to control PLLs, this case could be removed from ATF.
For case 2) we'll call the PMU to configure the clock gate. This is done
using system-level clock enable EEMI API.
Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com> Acked-by: Will Wong <WILLW@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com>
projects / arm-tf.git / log