Meteor Lake is Intel's successor to Raptor lake. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Raptor lake.
Share adl_cstates with Raptor lake.
Update the comments for Meteor Lake.
Data buffer for active map is allocated in alloc_active_ring and freed
in free_active_ring function, which is used only for the error
cleanup. pvcalls_front_release is calling pvcalls_front_free_map which
ends foreign access for this buffer, but doesn't free allocated pages.
Call free_active_ring to clean all allocated resources.
Symbols _edata and _end in the linker script are the
only unaligned expicitly on page boundary. Although
_end is aligned implicitly by BSS_SECTION macro that
is still inconsistent and could lead to a bug if a tool
or function would assume that _edata is as aligned as
others.
For example, vmem_map_init() function does not align
symbols _etext, _einittext etc. Should these symbols
be unaligned as well, the size of ranges to update
were short on one page.
Instead of fixing every occurrence of this kind in the
code and external tools just force the alignment on
these two symbols.
Using DEBUG_H without a prefix is very generic and inconsistent with
other header guards in arch/s390/include/asm. In fact it collides with
the same name in the ath9k wireless driver though that depends on !S390
via disabled wireless support. Let's just use a consistent header guard
name and prevent possible future trouble.
This modem has 7 interfaces, 5 of them are serial interfaces and are
driven by cdc_acm, while 2 of them are wwan interfaces and are driven
by cdc_ether:
If 0: Abstract (modem)
If 1: Abstract (modem)
If 2: Abstract (modem)
If 3: Abstract (modem)
If 4: Abstract (modem)
If 5: Ethernet Networking
If 6: Ethernet Networking
Without this change, the 2 network interfaces will be named to usb0
and usb1, our QA think the names are confusing and filed a bug on it.
After applying this change, the name will be wwan0 and wwan1, and
they could work well with modem manager.
The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.
Size of the 'expect' array in the __report_matches is 1536 bytes, which
is exactly the default frame size warning limit of the xtensa
architecture.
As a result allmodconfig xtensa kernel builds with the gcc that does not
support the compiler plugins (which otherwise would push the said
warning limit to 2K) fail with the following message:
kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes
is larger than 1536 bytes
Fix it by dynamically allocating the 'expect' array.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Marco Elver <elver@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
If xSPI is in x2/x4/x8 mode to calculate busy
cycles, busy bits count must be divided by the number
of lanes.
If opcommand is using 8 busy bits, but SPI is
in x4 mode, there will be only 2 busy cycles.
Razer Blade 14 (2022) - RZ09-0427 needs the quirk to enable the built in microphone
Signed-off-by: Wim Van Boven <wimvanboven@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221216081828.12382-1-wimvanboven@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allow system health detection mechanisms to check the FW state, this
will allow them to check if the FW is in its "crashed" state going
forward to help automatically diagnose driver state.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20221220125629.8469-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the DSP is suspended while the firmware is in the crashed state, we
skip tearing down the pipelines. This means that the widget reference
counts will not get to reset to 0 before suspend. This will lead to
errors with resuming audio after system resume. To fix this, invoke the
tear_down_all_pipelines op before skipping to DSP suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20221220125629.8469-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the DSP crashes before the system suspends, the setting of target state
will be skipped because the firmware state will no longer be
SOF_FW_BOOT_COMPLETE. This leads to the incorrect assumption that the
DSP should suspend to D0I3 instead of suspending to D3. To fix this,
set the target_state before we skip to DSP suspend even when the DSP has
crashed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20221220125629.8469-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.
This introduces a regression wrt. the issue fixed in commit e8218fe414d4
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.
Consequently we need to check the session's target state during iscsid
restart. If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).
Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Link: https://lore.kernel.org/r/20221126010752.231917-1-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Wu Bo <wubo40@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: c999d1985eff ("tcp: export data delivery rate") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David Morley <morleyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Tested-by: David Morley <morleyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: c658a1be8f5c ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the original implementation of dwmac5
commit 2acc9961f25f ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 09a52d8608c3 ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 09a52d8608c3 ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: bbdf5c923cee ("thermal: core: fix some possible name leaks in error paths") Fixes: 743160b98189 ("thermal: Validate new state in cur_state_store()") Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Frank Rowand <frowand.list@gmail.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return an error pointer if ->get_max_state() fails. The current code
returns NULL which will cause an oops in the callers.
Fixes: 743160b98189 ("thermal: Validate new state in cur_state_store()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: f165a55dea80 ("thermal: core: call put_device() only after device_register() fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
In cur_state_store(), the new state of the cooling device is received
from user-space and is not validated by the thermal core but the same is
left for the individual drivers to take care of. Apart from duplicating
the code it leaves possibility for introducing bugs where a driver may
not do it right.
Lets make the thermal core check the new state itself and store the max
value in the cooling device structure.
Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: f165a55dea80 ("thermal: core: call put_device() only after device_register() fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes: 651fe1942f44 ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
In test_async_probe_init, second set of asynchronous devices are saved
in sync_dev[sync_id], which should be async_dev[async_id].
This makes these devices not unregistered when exit.
> modprobe test_async_driver_probe && \
> modprobe -r test_async_driver_probe && \
> modprobe test_async_driver_probe
...
> sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4'
> kobject_add_internal failed for test_async_driver.4 with -EEXIST,
don't try to register things with the same name in the same directory.
Fixes: e071531bce7a ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221125063541.241328-1-chenzhongjin@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I got the following WARNING message while removing driver(ds2482):
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire]
WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0
CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307
RIP: 0010:__might_sleep+0x98/0xa0
Call Trace:
exit_signals+0x6c/0x550
do_exit+0x2b4/0x17e0
kthread_exit+0x52/0x60
kthread+0x16d/0x1e0
ret_from_fork+0x1f/0x30
The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(),
set it to TASK_RUNNING when it breaks out of the loop to avoid the
warning.
I got a deadloop report while doing device(ds2482) add/remove test:
[ 162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
...
__w1_remove_master_device() can't return, because the dev->refcnt is not zero.
w1_add_master_device() |
w1_alloc_dev() |
atomic_set(&dev->refcnt, 2) |
kthread_run() |
|__w1_remove_master_device()
| kthread_stop()
// KTHREAD_SHOULD_STOP is set, |
// threadfn(w1_process) won't be |
// called. |
kthread() |
| // refcnt will never be 0, it's deadloop.
| while (atomic_read(&dev->refcnt)) {...}
After calling w1_add_master_device(), w1_process() is not really
invoked, before w1_process() starting, if kthread_stop() is called
in __w1_remove_master_device(), w1_process() will never be called,
the refcnt can not be decreased, then it causes deadloop in remove
function because of non-zero refcnt.
We need to make sure w1_process() is really started, so move the
set refcnt into w1_process() to fix this problem.
The 'parent' returned by fwnode_graph_get_port_parent()
with refcount incremented when 'prev' is not NULL, it
needs be put when finish using it.
Because the parent is const, introduce a new variable to
store the returned fwnode, then put it before returning
from fwnode_graph_get_next_endpoint().
Fixes: 09587e998f9e ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-and-tested-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20221123022542.2999510-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.
Fixes: 754ddfe37916 ("dmaengine: ptdma: Initial driver for the AMD PTDMA") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dwc3 core support now links against the extcon subsystem,
so it cannot be built-in when extcon is a loadable module:
arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon':
core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle'
arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev'
arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node'
There was already a Kconfig dependency in the dual-role support,
but this is now needed for the entire dwc3 driver.
It is still possible to build dwc3 without extcon, but this
prevents it from being set to built-in when extcon is a loadable
module.
While one cpu is working on looking up the right socket from ehash
table, another cpu is done deleting the request socket and is about
to add (or is adding) the big socket from the table. It means that
we could miss both of them, even though it has little chance.
Let me draw a call trace map of the server side.
CPU 0 CPU 1
----- -----
tcp_v4_rcv() syn_recv_sock()
inet_ehash_insert()
-> sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
-> __sk_nulls_add_node_rcu(sk, list)
Notice that the CPU 0 is receiving the data after the final ack
during 3-way shakehands and CPU 1 is still handling the final ack.
Why could this be a real problem?
This case is happening only when the final ack and the first data
receiving by different CPUs. Then the server receiving data with
ACK flag tries to search one proper established socket from ehash
table, but apparently it fails as my map shows above. After that,
the server fetches a listener socket and then sends a RST because
it finds a ACK flag in the skb (data), which obeys RST definition
in RFC 793.
Besides, Eric pointed out there's one more race condition where it
handles tw socket hashdance. Only by adding to the tail of the list
before deleting the old one can we avoid the race if the reader has
already begun the bucket traversal and it would possibly miss the head.
Many thanks to Eric for great help from beginning to end.
Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.
This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.
Fixes: 7877214445d98e ("nvme-pci: Remove tag from process cq") Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Naresh reports seeing a warning that gred is calling
u64_stats_update_begin() with preemption enabled.
Arnd points out it's coming from _bstats_update().
We should be holding the qdisc lock when writing
to stats, they are also updated from the datapath.
Currently, we run into a number of WARN()s when attempting to unload the
amdgpu driver (e.g. using "modprobe -r amdgpu"). These all stem from
calling drm_encoder_cleanup() too early. So, to fix this we can stop
calling drm_encoder_cleanup() from amdgpu_dm_fini() and instead have it
be called from amdgpu_dm_encoder_destroy(). Also, we don't need to free
in amdgpu_dm_encoder_destroy() since mst_encoders[] isn't explicitly
allocated by the slab allocator.
Fixes: 25291155af2a ("drm/amdgpu/display: create fake mst encoders ahead of time (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.
Terminate vdesc when terminating an ongoing transfer.
This will ensure that the vdesc is present in the desc_terminated list
The descriptor will be freed later in desc_free_list().
This fixes the memory leaks which can happen when terminating an
ongoing transfer.
Avoid getting DFS referral from an exclusive lock in
cache_refresh_path() because the tcon IPC used for getting the
referral could be disconnected and thus causing a deadlock as shown
below:
where task A cannot wake up task B because it is blocked on
down_read() due to the exclusive lock held in cache_refresh_path() and
therefore not being able to make progress.
Fixes: ad8d62972b7e ("cifs: keep referral server sessions alive") Reviewed-by: Aurélien Aptel <aurelien.aptel@gmail.com> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
betopff_init() only checks the total sum of the report counts for each
report field to be at least 4, but hid_betopff_play() expects 4 report
fields.
A device advertising an output report with one field and 4 report counts
would pass the check but crash the kernel with a NULL pointer dereference
in hid_betopff_play().
Fixes: 872a37ad8c70 ("l2tp: close all race conditions in l2tp_tunnel_register()") Reported-by: syzbot+bbd35b345c7cab0d9a08@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/netdev/20230114030137.672706-1-xiyou.wangcong@gmail.com/T/#m1164ff20628671b0f326a24cb106ab3239c70ce3 Cc: Cong Wang <cong.wang@bytedance.com> Cc: Guillaume Nault <gnault@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3d651258564f("virtio_net: disable cb aggressively") enables
virtqueue callback via the following statement:
do {
if (use_napi)
virtqueue_disable_cb(sq->vq);
free_old_xmit_skbs(sq, false);
} while (use_napi && kick &&
unlikely(!virtqueue_enable_cb_delayed(sq->vq)));
When NAPI is used and kick is false, the callback won't be enabled
here. And when the virtqueue is about to be full, the tx will be
disabled, but we still don't enable tx interrupt which will cause a TX
hang. This could be observed when using pktgen with burst enabled.
TO be consistent with the logic that tries to disable cb only for
NAPI, fixing this by trying to enable delayed callback only when NAPI
is enabled when the queue is about to be full.
Fixes: 3d651258564f ("virtio_net: disable cb aggressively") Signed-off-by: Jason Wang <jasowang@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
PTP TX timestamp handling was observed to be broken with this driver
when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
the expected TX timestamp after transmitting a packet, causing it to
enter a failure state.
The problem appears to be due to the way that the driver pads packets
which are smaller than the Ethernet minimum of 60 bytes. If headroom
space was available in the SKB, this caused the driver to move the data
back to utilize it. However, this appears to cause other data references
in the SKB to become inconsistent. In particular, this caused the
ptp_one_step_sync function to later (in the TX completion path) falsely
detect the packet as a one-step SYNC packet, even when it was not, which
caused the TX timestamp to not be processed when it should be.
Using the headroom for this purpose seems like an unnecessary complexity
as this is not a hot path in the driver, and in most cases it appears
that there is sufficient tailroom to not require using the headroom
anyway. Remove this usage of headroom to prevent this inconsistency from
occurring and causing other problems.
Fixes: 586890dec21b ("net: macb: add support for padding and fcs computation") Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5 Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The first time dma_chan_get() is called for a channel the channel
client_count is incorrectly incremented twice for public channels,
first in balance_ref_count(), and again prior to returning. This
results in an incorrect client count which will lead to the
channel resources not being freed when they should be. A simple
test of repeated module load and unload of async_tx on a Dell
Power Edge R7425 also shows this resulting in a kref underflow
warning.
cat /sys/class/dma/dma0chan*/in_use would get the wrong result.
2
2
2
Fixes: c19ebd8178e7 ("dmaengine: Rework dma_chan_get") Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Jie Hai <haijie1@huawei.com> Test-by: Jie Hai <haijie1@huawei.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Joel Savitz <jsavitz@redhat.com> Link: https://lore.kernel.org/r/20221201030050.978595-1-koba.ko@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
The cited commit removes eswitch mode none. So after devlink reload
in switchdev mode, eswitch mode is not changed. But actually eswitch
is disabled during devlink reload.
Fix it by setting eswitch mode to legacy when disabling eswitch
which is called by reload_down.
Fixes: da5c5f25de4b ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently decap action is set based on tunnel_id. That means it is
set unconditionally. But for decap, ct and sample actions, decap is
done before ct. No need to decap again in sample.
And the actions are set correctly when parsing. So set decap action
based on attr instead of tunnel_id.
Fixes: 686c43a3e11e ("net/mlx5e: TC, Support sample offload action for tunneled traffic") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to HW spec element_type, element_attributes and parent_element_id fields
should be reserved (0x0) when calling MODIFY_SCHEDULING_ELEMENT command.
This patch remove initialization of these fields when calling the command.
The cited commit changed class of tc_ht internal mutex in order to avoid
false lock dependency with fs_core node and flow_table hash table
structures. However, hash table implementation internally also includes a
workqueue task with its own lockdep map which causes similar bogus lockdep
splat[0]. Fix it by also adding dedicated class for hash table workqueue
work structure of tc_ht.
[0]:
[ 1139.672465] ======================================================
[ 1139.673552] WARNING: possible circular locking dependency detected
[ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted
[ 1139.675734] ------------------------------------------------------
[ 1139.676801] modprobe/5998 is trying to acquire lock:
[ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.679662]
but task is already holding lock:
[ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.682223]
which lock already depends on the new lock.
The IPA interrupt can fire when pm_runtime is disabled due to it racing
with the PM suspend/resume code. This causes a splat in the interrupt
handler when it tries to call pm_runtime_get().
Explicitly disable the interrupt in our ->suspend callback, and
re-enable it in ->resume to avoid this. If there is an interrupt pending
it will be handled after resuming. The interrupt is a wake_irq, as a
result even when disabled if it fires it will cause the system to wake
from suspend as well as cancel any suspend transition that may be in
progress. If there is an interrupt pending, the ipa_isr_thread handler
will be called after resuming.
Fixes: efb222c1971e ("net: ipa: use autosuspend") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230115175925.465918-1-caleb.connolly@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reports a possible deadlock in rfcomm_sk_state_change [1].
While rfcomm_sock_connect acquires the sk lock and waits for
the rfcomm lock, rfcomm_sock_release could have the rfcomm
lock and hit a deadlock for acquiring the sk lock.
Here's a simplified flow:
This patch drops the sk lock before calling rfcomm_dlc_open to
avoid the possible deadlock and holds sk's reference count to
prevent use-after-free after rfcomm_dlc_open completes.
Reported-by: syzbot+d7ce59...@syzkaller.appspotmail.com Fixes: e290c6f2b6f4 ("Bluetooth: btintel: Combine setting up MSFT extension") Link: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes the following trace caused by attempting to lock
cmd_sync_work_lock while holding the rcu_read_lock:
kworker/u3:2/212 is trying to lock: ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at:
hci_cmd_sync_queue+0xad/0x140
other info that might help us debug this:
context-{4:4}
4 locks held by kworker/u3:2/212:
#0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
process_one_work+0x4dc/0x9a0
#1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
at: process_one_work+0x4dc/0x9a0
#2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at:
hci_cc_le_set_cig_params+0x64/0x4f0
#3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at:
hci_cc_le_set_cig_params+0x2f9/0x4f0
Fixes: 235819527e62 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is
not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR
to pass the instance to callback so no memory needs to be allocated.
Fixes: 11c0dc64f86e ("Bluetooth: convert hci_update_adv_data to hci_sync") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path.
Fixes: e1c97e6240d7 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch Warning:
net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy()
'mesh_tx->param' too small (48 vs 50)
Analysis:
'mesh_tx->param' is array of size 48. This is the destination.
u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48.
But in the caller 'mesh_send' we reject only when len > 50.
len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50.
Fixes: 033a8c3a3d29 ("Bluetooth: Implement support for Mesh") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a connection is re-used, following can happen:
[ connection starts to close, fin sent in either direction ]
> syn # initator quickly reuses connection
< ack # peer sends a challenge ack
> rst # rst, sequence number == ack_seq of previous challenge ack
> syn # this syn is expected to pass
Problem is that the rst will fail window validation, so it gets
tagged as invalid.
If ruleset drops such packets, we get repeated syn-retransmits until
initator gives up or peer starts responding with syn/ack.
Before the commit indicated in the "Fixes" tag below this used to work:
The challenge-ack made conntrack re-init state based on the challenge
ack itself, so the following rst would pass window validation.
Add challenge-ack support: If we get ack for syn, record the ack_seq,
and then check if the rst sequence number matches the last ack number
seen in reverse direction.
Fixes: fb3c6136fc51 ("netfilter: nf_conntrack_tcp: re-init for syn packets only") Reported-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As per the documentation, function usb_ep_free_request guarantees
the request will not be queued or no longer be re-queued (or
otherwise used). However, with the current implementation it
doesn't make sure that the request in ep0 isn't reused.
Fix this by dequeuing the ep0req on functionfs_unbind before
freeing the request to align with the definition.
While performing fast composition switch, there is a possibility that the
process of ffs_ep0_write/ffs_ep0_read get into a race condition
due to ep0req being freed up from functionfs_unbind.
Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait
by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't
bounded so it can go ahead and mark the ep0req to NULL, and since there
is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free.
Fix this by making a serialized execution between the two functions using
a mutex_lock(ffs->mutex).
During ucsi_unregister() when destroying a connector's workqueue, there
may still be pending delayed work items that haven't been scheduled yet.
Because queue_delayed_work() uses a separate timer to schedule a work
item, the destroy_workqueue() call is not aware of any pending items.
Hence when a pending item's timer expires it would then try to queue on
a dangling workqueue pointer.
Fix this by keeping track of all work items in a list, so that prior to
destroying the workqueue any pending items can be flushed. Do this by
calling mod_delayed_work() as that will cause pending items to get
queued immediately, which then allows the ensuing destroy_workqueue() to
implicitly drain all currently queued items to completion and free
themselves.
Fixes: 28f46171e582 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking") Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Co-developed-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Signed-off-by: Jack Pham <quic_jackp@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230110071218.26261-1-quic_jackp@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This partially reverts commit 651ca0ea77efd1 ("HID: usbhid: Add ALWAYS_POLL quirk
for some mice"), as it turns out to break reboot on some platforms for reason
yet to be understood.
Fixes: 651ca0ea77efd1 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
IO mux selection is configured in PMU_GRF_SOC_CON4 and GRF_IOFUNC_SEL0-5
regs on RK3568. pwm0-2 is configured in PMU_GRF reg and the rest is
configured in GRF_IOFUNC regs according to TRM [1].
Update mux route data to reflect this and use proper detection pin for
UART1 IO mux M1.
This fixes HDMITX IO mux M1 selection and makes it possible to enable
HDMI CEC on my Radxa ROCK 3 Model A v1.31 board.
In a number of cases the driver assigns a default value of -1 to
priv->plat->phy_addr. This may result in calling mdiobus_get_phy()
with addr parameter being -1. Therefore check for this scenario and
bail out before calling mdiobus_get_phy().
Fixes: 26ef26a92265 ("net: stmmac: Fix case when PHY handle is not present") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/669f9671-ecd1-a41b-2727-7b73e3003985@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a check for empty report_list in bigben_probe().
The missing check causes a type confusion when issuing a list_entry()
on an empty report_list.
The problem is caused by the assumption that the device must
have valid report_list. While this will be true for all normal HID
devices, a suitably malicious device can violate the assumption.
Add a check for empty report_list in hid_validate_values().
The missing check causes a type confusion when issuing a list_entry()
on an empty report_list.
The problem is caused by the assumption that the device must
have valid report_list. While this will be true for all normal HID
devices, a suitably malicious device can violate the assumption.
Fixes: 9665020953d7 ("HID: core: fix validation of report id 0") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
The caller may pass any value as addr, what may result in an out-of-bounds
access to array mdio_map. One existing case is stmmac_init_phy() that
may pass -1 as addr. Therefore validate addr before using it.
Fixes: 406bb4311456 ("phy: Add API for {un}registering an mdio device to a bus.") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/cdf664ea-3312-e915-73f8-021678d08887@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Packet len computed as difference of length word extracted from
skb data and four may result in a negative value. In such case
processing of the buffer should be interrupted rather than
setting sr_skb->len to an unexpectedly large value (due to cast
from signed to unsigned integer) and passing sr_skb to
usbnet_skb_return.
The code in l2tp_tunnel_register() is racy in several ways:
1. It modifies the tunnel socket _after_ publishing it.
2. It calls setup_udp_tunnel_sock() on an existing socket without
locking.
3. It changes sock lock class on fly, which triggers many syzbot
reports.
This patch amends all of them by moving socket initialization code
before publishing and under sock lock. As suggested by Jakub, the
l2tp lockdep class is not necessary as we can just switch to
bh_lock_sock_nested().
Fixes: 84a24a09d8c6 ("l2tp: fix a lockdep splat") Fixes: 228539feba0a ("l2tp: fix races in tunnel creation") Reported-by: syzbot+52866e24647f9a23403f@syzkaller.appspotmail.com Reported-by: syzbot+94cc2a66fc228b23f360@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
l2tp uses l2tp_tunnel_list to track all registered tunnels and
to allocate tunnel ID's. IDR can do the same job.
More importantly, with IDR we can hold the ID before a successful
registration so that we don't need to worry about late error
handling, it is not easy to rollback socket changes.
This is a preparation for the following fix.
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Guillaume Nault <gnault@redhat.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Parkin <tparkin@katalix.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 872a37ad8c70 ("l2tp: close all race conditions in l2tp_tunnel_register()") Signed-off-by: Sasha Levin <sashal@kernel.org>
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: 55fb5b5af7a0 ("tc: Add support for configuring the taprio scheduler") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Correct queue statistics reading. All queue statistics are stored as unsigned
long values. The retrieval for ethtool fetches these values as u64. However, on
some systems the size of the counters are 32 bit. That yields wrong queue
statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by
using the correct data type.
Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short
period of time:
When reading pinconf-pins from debugfs it fails to get the configured pull
type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a
reverse of the pull-up value swap applied in rockchip_set_pull so that
pull-up is correctly reported in pinconf-pins.
Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes: 2085301f5110 ("pinctrl: rockchip: add support for rk3568") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com> Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since resplen and respoffs are signed integers sufficiently
large values of unsigned int len and offset members of RNDIS
response will result in negative values of prior variables.
This may be utilized to bypass implemented security checks
to either extract memory contents by manipulating offset or
overflow the data buffer via memcpy by manipulating both
offset and len.
Additionally assure that sum of resplen and respoffs does not
overflow so buffer boundaries are kept.
Fixes: fcc264202521 ("rndis_wlan: copy only useful data from rndis_command respond") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Always configure GPIO pins which are used as interrupt source as INPUTs.
In case the default pin configuration is OUTPUT, or the prior stage does
configure the pins as OUTPUT, then Linux will not reconfigure the pin as
INPUT and no interrupts are received.
Always configure the interrupt source GPIO pin as input to fix the above case.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 86047271958e6 ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver currently performs register read-modify-write without locking
in its irqchip part, this could lead to a race condition when configuring
interrupt mode setting. Add the missing bgpio spinlock lock/unlock around
the register read-modify-write.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Fixes: 86047271958e6 ("MXC arch: Add gpio support for the whole platform") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Peek at old qdisc and graft only when deleting a leaf class in the htb,
rather than when deleting the htb itself. Do not peek at the qdisc of the
netdev queue when destroying the htb. The caller may already have grafted a
new qdisc that is not part of the htb structure being destroyed.
This fix resolves two use cases.
1. Using tc to destroy the htb.
- Netdev was being prematurely activated before the htb was fully
destroyed.
2. Using tc to replace the htb with another qdisc (which also leads to
the htb being destroyed).
- Premature netdev activation like previous case. Newly grafted qdisc
was also getting accidentally overwritten when destroying the htb.
Since the "ethernet-ports" node is retrieved using
device_get_named_child_node(), it should be release after using it. Add
missing fwnode_handle_put() and move the code that retrieved the node
from device-tree to avoid complicated handling in case of error.
Fixes: 74253577d2c1 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112161311.495124-1-clement.leger@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.
Fixes: 863ef1095c5a ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a use-after-free that occurs in kfree_skb() called from
local_cleanup(). This could happen when killing nfc daemon (e.g. neard)
after detaching an nfc device.
When detaching an nfc device, local_cleanup() called from
nfc_llcp_unregister_device() frees local->rx_pending and decreases
local->ref by kref_put() in nfc_llcp_local_put().
In the terminating process, nfc daemon releases all sockets and it leads
to decreasing local->ref. After the last release of local->ref,
local_cleanup() called from local_release() frees local->rx_pending
again, which leads to the bug.
Setting local->rx_pending to NULL in local_cleanup() could prevent
use-after-free when local_cleanup() is called twice.
Fixes: 8f660fff850f ("NFC: llcp: Clean local timers and works when removing a device") Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Link: https://lore.kernel.org/r/20230111131914.3338838-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c12e38855f60 ("drm/vc4: bo: Fix drmm_mutex_init memory hog")
removed the only use of the ret variable, but didn't remove the
variable itself leading to a unused variable warning.
To mitigate Spectre v4, 25e3c89623d4 ("bpf: Fix leakage due to
insufficient speculative store bypass mitigation") inserts lfence
instructions after 1) initializing a stack slot and 2) spilling a
pointer to the stack.
However, this does not cover cases where a stack slot is first
initialized with a pointer (subject to sanitization) but then
overwritten with a scalar (not subject to sanitization because
the slot was already initialized). In this case, the second write
may be subject to speculative store bypass (SSB) creating a
speculative pointer-as-scalar type confusion. This allows the
program to subsequently leak the numerical pointer value using,
for example, a branch-based cache side channel.
To fix this, also sanitize scalars if they write a stack slot
that previously contained a pointer. Assuming that pointer-spills
are only generated by LLVM on register-pressure, the performance
impact on most real-world BPF programs should be small.
The following unprivileged BPF bytecode drafts a minimal exploit
and the mitigation:
[...]
// r6 = 0 or 1 (skalar, unknown user input)
// r7 = accessible ptr for side channel
// r10 = frame pointer (fp), to be leaked
//
r9 = r10 # fp alias to encourage ssb
*(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked
// lfence added here because of pointer spill to stack.
//
// Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor
// for no r9-r10 dependency.
//
*(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr
// 25e3c89623d4: no lfence added because stack slot was not STACK_INVALID,
// store may be subject to SSB
//
// fix: also add an lfence when the slot contained a ptr
//
r8 = *(u64 *)(r9 - 8)
// r8 = architecturally a scalar, speculatively a ptr
//
// leak ptr using branch-based cache side channel:
r8 &= 1 // choose bit to leak
if r8 == 0 goto SLOW // no mispredict
// architecturally dead code if input r6 is 0,
// only executes speculatively iff ptr bit is 1
r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast)
SLOW:
[...]
After running this, the program can time the access to *(r7 + 0) to
determine whether the chosen pointer bit was 0 or 1. Repeat this 64
times to recover the whole address on amd64.
In summary, sanitization can only be skipped if one scalar is
overwritten with another scalar. Scalar-confusion due to speculative
store bypass can not lead to invalid accesses because the pointer
bounds deducted during verification are enforced using branchless
logic. See 422fca2ce03f ("bpf: prevent out of bounds speculation on
pointer arithmetic") for details.
Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks}
because speculative leaks are likely unexpected if these were enabled.
For example, leaking the address to a protected log file may be acceptable
while disabling the mitigation might unintentionally leak the address
into the cached-state of a map that is accessible to unprivileged
processes.
AN restart triggered during KR training not only aborts the KR training
process but also move the HW to unstable state. Driver has to wait upto
500ms or until the KR training is completed before restarting AN cycle.
Fixes: f4ca15e0258c ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / kernel.git / log