Linus Torvalds [Fri, 8 Nov 2019 16:17:22 +0000 (08:17 -0800)]
Merge tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes for drm: amdgpu has a few but they are pretty scattered
fixes, the fbdev one is a build regression fix that we didn't want to
risk leaving out, otherwise a couple of i915, one radeon and a core
atomic fix.
core:
- add missing documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
fbdev:
- One compilation fix for c2p fbdev helpers
amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus
radeon:
- Port an SI power fix from amdgpu
i915:
- Fix HPD poll to avoid kworker consuming a lot of cpu cycles.
- Do not use TBT type for non Type-C ports"
* tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm:
drm/radeon: fix si_enable_smc_cac() failed issue
drm/amdgpu/renoir: move gfxoff handling into gfx9 module
drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9
drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10
drm/amdgpu: register gpu instance before fan boost feature enablment
drm/amd/swSMU: fix smu workload bit map error
drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields
drm/amdgpu: add navi14 PCI ID
Revert "drm/amd/display: setting the DIG_MODE to the correct value."
drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14
drm/amdgpu: dont schedule jobs while in reset
drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE
drm/atomic: fix self-refresh helpers crtc state dereference
drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
drm/i915: Avoid HPD poll detect triggering a new detect cycle
fbdev: c2p: Fix link failure on non-inlining
Linus Torvalds [Fri, 8 Nov 2019 16:15:01 +0000 (08:15 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for various clk driver issues that happened because of code we
merged this merge window.
The Amlogic driver was missing some flags causing rates to be rounded
improperly or clk_set_rate() to fail. The Samsung driver wasn't
freeing everything on error paths and improperly saving/restoring PLL
state across suspend/resume. The at91 driver was calling msleep() too
early when scheduling hadn't started, so we put in place a quick
solution until we can handle this sort of problem in the core
framework.
There were also problems with the Allwinner driver and operator
precedence being incorrect causing subtle bugs. Finally, the TI driver
was duplicating aliases and not delaying long enough leading to some
unexpected timeouts"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
clk: ast2600: Fix enabling of clocks
clk: at91: avoid sleeping early
clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM
clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU
clk: samsung: exynos5433: Fix error paths
clk: at91: sam9x60: fix programmable clock
clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes
clk: meson: g12a: fix cpu clock rate setting
clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
The max value of EPB can only be 0x0F. Attempting to set more than that
triggers an "unchecked MSR access error" warning which happens in
intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu().
However, it is not even necessary to touch the EPB from intel_pstate,
because it is restored on every CPU online by the intel_epb.c code,
so let that code do the right thing and drop the redundant (and
incorrect) EPB update from intel_pstate.
Fixes: 274d613465266 ("cpufreq: intel_pstate: Force HWP min perf before offline") Reported-by: Qian Cai <cai@lca.pw> Cc: 5.2+ <stable@vger.kernel.org> # 5.2+ Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dave Airlie [Fri, 8 Nov 2019 03:07:58 +0000 (13:07 +1000)]
Merge tag 'drm-fixes-5.4-2019-11-06' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-11-06:
amdgpu:
- Fix navi14 display issue root cause and revert workaround
- GPU reset scheduler interaction fix
- Fix fan boost on multi-GPU
- Gfx10 and sdma5 fixes for navi
- GFXOFF fix for renoir
- Add navi14 PCI ID
- GPUVM fix for arcturus
Dave Airlie [Fri, 8 Nov 2019 02:12:49 +0000 (12:12 +1000)]
Merge tag 'drm-misc-fixes-2019-11-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- Some new documentation for GEM shmem madvise helpers
- Fix for a state dereference in atomic self-refresh helpers
- One compilation fix for c2p fbdev helpers
Linus Torvalds [Thu, 7 Nov 2019 19:54:54 +0000 (11:54 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"Two fixes for the HID subsystem:
- regression fix for i2c-hid power management (Hans de Goede)
- signed vs unsigned API fix for Wacom driver (Jason Gerecke)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: generic: Treat serial number and related fields as unsigned
HID: i2c-hid: Send power-on command after reset
Takashi Iwai [Thu, 7 Nov 2019 12:52:17 +0000 (13:52 +0100)]
Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.
changzhu [Tue, 5 Nov 2019 10:29:12 +0000 (18:29 +0800)]
drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9
It needs to add warning to update firmware in gfx9
in case that firmware is too old to have function to
realize dummy read in cp firmware.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
changzhu [Thu, 10 Oct 2019 03:02:33 +0000 (11:02 +0800)]
drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where
status registers requiring HW to update have a 1 cycle delay, due
to the register update having to go through GRBM.
For cp ucode, it has realized dummy read in cp firmware.It covers
the use of WAIT_REG_MEM operation 1 case only.So it needs to call
gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to
update firmware in case firmware is too old to have function to realize
dummy read in cp firmware.
For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is
moved to gfxhub in gfx10. So it needs to add dummy read in driver
between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 5 Nov 2019 10:13:49 +0000 (18:13 +0800)]
drm/amdgpu: register gpu instance before fan boost feature enablment
Otherwise, the feature enablement will be skipped due to wrong count.
Fixes: ab248e9b88a81df ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 5 Nov 2019 10:16:38 +0000 (18:16 +0800)]
drm/amd/swSMU: fix smu workload bit map error
fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error
on vega20 and navi asic.
fix commit:
drm/amd/powerplay: add function get_workload_type_map for swsmu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rob Herring [Fri, 1 Nov 2019 15:37:54 +0000 (10:37 -0500)]
drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields
Add missing docbook comments to madvise fields in struct
drm_gem_shmem_object which fixes these warnings:
include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv' not described in 'drm_gem_shmem_object'
include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv_list' not described in 'drm_gem_shmem_object'
Fixes: 4ff5ce65bed1 ("drm/shmem: Add madvise state and purge helpers") Reported-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191101153754.22803-1-robh@kernel.org
Jason Gerecke [Wed, 6 Nov 2019 19:59:46 +0000 (11:59 -0800)]
HID: wacom: generic: Treat serial number and related fields as unsigned
The HID descriptors for most Wacom devices oddly declare the serial
number and other related fields as signed integers. When these numbers
are ingested by the HID subsystem, they are automatically sign-extended
into 32-bit integers. We treat the fields as unsigned elsewhere in the
kernel and userspace, however, so this sign-extension causes problems.
In particular, the sign-extended tool ID sent to userspace as ABS_MISC
does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
We introduce a function 'wacom_s32tou' that can undo the automatic sign
extension performed by 'hid_snto32'. We call this function when processing
the serial number and related fields to ensure that we are dealing with
and reporting the unsigned form. We opt to use this method rather than
adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
more robust in the face of future devices.
Ref: https://github.com/linuxwacom/input-wacom/issues/134 Fixes: d78da7cbd2 ("HID: wacom: generic: Support tool ID and additional tool types") CC: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Zhan Liu [Sat, 2 Nov 2019 01:10:17 +0000 (21:10 -0400)]
drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14
[Why]
Navi10 has 6 PHY, but Navi14 only has 5 PHY, that is
because there is no ENGINE_ID_DIGD in Navi14. Without
this patch, many HDMI related issues (e.g. HDMI S3
resume failure, HDMI pink screen on boot) will be
observed.
[How]
If "eng_id" is larger than ENGINE_ID_DIGD, then
add "eng_id" by 1.
Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Wed, 30 Oct 2019 08:50:46 +0000 (14:20 +0530)]
drm/amdgpu: dont schedule jobs while in reset
[Why]
doing kthread_park()/unpark() from drm_sched_entity_fini
while GPU reset is in progress defeats all the purpose of
drm_sched_stop->kthread_park.
If drm_sched_entity_fini->kthread_unpark() happens AFTER
drm_sched_stop->kthread_park nothing prevents from another
(third) thread to keep submitting job to HW which will be
picked up by the unparked scheduler thread and try to submit
to HW but fail because the HW ring is deactivated.
[How]
grab the reset lock before calling drm_sched_entity_fini()
Signed-off-by: Shirish S <shirish.s@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Wed, 6 Nov 2019 20:02:13 +0000 (12:02 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge more fixes from Andrew Morton:
"17 fixes"
Mostly mm fixes and one ocfs2 locking fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
mm/memory_hotplug: fix updating the node span
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
MAINTAINERS: update information for "MEMORY MANAGEMENT"
dump_stack: avoid the livelock of the dump_lock
zswap: add Vitaly to the maintainers list
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
mm, vmstat: hide /proc/pagetypeinfo from normal users
mm/mmu_notifiers: use the right return code for WARN_ON
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
mm: thp: handle page cache THP correctly in PageTransCompoundMap
mm, meminit: recalculate pcpu batch and high limits after init completes
mm/gup_benchmark: fix MAP_HUGETLB case
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
Rob Clark [Mon, 4 Nov 2019 17:37:36 +0000 (09:37 -0800)]
drm/atomic: fix self-refresh helpers crtc state dereference
drm_self_refresh_helper_update_avg_times() was incorrectly accessing the
new incoming state after drm_atomic_helper_commit_hw_done(). But this
state might have already been superceeded by an !nonblock atomic update
resulting in dereferencing an already free'd crtc_state.
TODO I *think* this will more or less do the right thing.. althought I'm
not 100% sure if, for example, we enter psr in a nonblock commit, and
then leave psr in a !nonblock commit that overtakes the completion of
the nonblock commit. Not sure if this sort of scenario can happen in
practice. But not crashing is better than crashing, so I guess we
should either take this patch or rever the self-refresh helpers until
Sean can figure out a better solution.
Fixes: d300b5483e37 ("drm: Measure Self Refresh Entry/Exit times to avoid thrashing") Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul fixed up some checkpatch warns] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191104173737.142558-1-robdclark@gmail.com
The clean up commit f1d43fbeaec2 ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.
The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance. After that point, there is another check for the max
number of instances, and it bails out if over the threshold. Before
the refactoring above, it worked fine because the code returned
directly from that point. After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error. Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri. This
causes inconsistency later, as if the timer was successfully
assigned.
In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is 2dc7a87fc3df ("net, mm: account
sock objects to kmemcg"), which made these slab caches subject to cgroup
memory accounting and control.
The problem with that is that cgroups, unlike the page allocator, do not
maintain dedicated atomic reserves. As a cgroup's usage hovers at its
limit, atomic allocations - such as done during network rx - can fail
consistently for extended periods of time. The kernel is not able to
operate under these conditions.
We don't want to revert the culprit patch, because it indeed tracks a
potentially substantial amount of memory used by a cgroup.
We also don't want to implement dedicated atomic reserves for cgroups.
There is no point in keeping a fixed margin of unused bytes in the
cgroup's memory budget to accomodate a consumer that is impossible to
predict - we'd be wasting memory and get into configuration headaches,
not unlike what we have going with min_free_kbytes. We do this for
physical mem because we have to, but cgroups are an accounting game.
Instead, account these privileged allocations to the cgroup, but let
them bypass the configured limit if they have to. This way, we get the
benefits of accounting the consumed memory and have it exert pressure on
the rest of the cgroup, but like with the page allocator, we shift the
burden of reclaimining on behalf of atomic allocations onto the regular
allocations that can block.
Link: http://lkml.kernel.org/r/20191022233708.365764-1-hannes@cmpxchg.org Fixes: 2dc7a87fc3df ("net, mm: account sock objects to kmemcg") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> [4.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We recently started updating the node span based on the zone span to
avoid touching uninitialized memmaps.
Currently, we will always detect the node span to start at 0, meaning a
node can easily span too many pages. pgdat_is_empty() will still work
correctly if all zones span no pages. We should skip over all zones
without spanned pages and properly handle the first detected zone that
spans pages.
Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node
span cannot easily be inspected and tested. The node span gives no real
guarantees when an architecture supports memory hotplug, meaning it can
easily contain holes or span pages of different nodes.
The node span is not really used after init on architectures that
support memory hotplug.
E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in
mm/kmemleak.c:kmemleak_scan(). These users seem to be fine.
Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com Fixes: 135b6329b2fe ("mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Roman Gushchin [Wed, 6 Nov 2019 05:17:03 +0000 (21:17 -0800)]
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
page_cgroup_ino() doesn't return a valid memcg pointer for non-compound
slab pages, because it depends on PgHead AND PgSlab flags to be set to
determine the memory cgroup from the kmem_cache. It's correct for
compound pages, but not for generic small pages. Those don't have PgHead
set, so it ends up returning zero.
Fix this by replacing the condition to PageSlab() && !PageTail().
Before this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 38 0 _______S___________________________________ slab
After this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 147 0 _______S___________________________________ slab
Also, hwpoison_filter_task() uses output of page_cgroup_ino() in order
to filter error injection events based on memcg. So if
page_cgroup_ino() fails to return memcg pointer, we just fail to inject
memory error. Considering that hwpoison filter is for testing, affected
users are limited and the impact should be marginal.
[n-horiguchi@ah.jp.nec.com: changelog additions] Link: http://lkml.kernel.org/r/20191031012151.2722280-1-guro@fb.com Fixes: bafe805e79f5 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages") Signed-off-by: Roman Gushchin <guro@fb.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Song Liu [Wed, 6 Nov 2019 05:17:00 +0000 (21:17 -0800)]
MAINTAINERS: update information for "MEMORY MANAGEMENT"
I was trying to find the mm tree in MAINTAINERS by searching "Morton".
Unfortunately, I didn't find one. And I didn't even locate the MEMORY
MANAGEMENT section quickly, because Andrew's name was not listed there.
Thanks to Johannes who helped me find the mm tree.
Let save other's time searching around by adding:
M: Andrew Morton <akpm@linux-foundation.org>
T: git git://github.com/hnaz/linux-mm.git
[akpm@linux-foundation.org: add ozlabs.org quilt trees] Link: http://lkml.kernel.org/r/20191030202217.3498133-1-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kevin Hao [Wed, 6 Nov 2019 05:16:57 +0000 (21:16 -0800)]
dump_stack: avoid the livelock of the dump_lock
In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem. We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg(). This will definitely mitigate
the thundering herd problem. Thanks Linus for the suggestion.
[akpm@linux-foundation.org: fix comment] Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com Fixes: 7abe7f7b8563 ("dump_stack: serialize the output from dump_stack()") Signed-off-by: Kevin Hao <haokexin@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 6 Nov 2019 05:16:51 +0000 (21:16 -0800)]
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
While investigating a bug related to higher atomic allocation failures,
we noticed the failure warnings positively drowning the console, and in
our case trigger lockup warnings because of a serial console too slow to
handle all that output.
But even if we had a faster console, it's unclear what additional
information the current level of repetition provides.
Allocation failures happen for three reasons: The machine is OOM, the VM
is failing to handle reasonable requests, or somebody is making
unreasonable requests (and didn't acknowledge their opportunism with
__GFP_NOWARN). Having the memory dump, a callstack, and the ratelimit
stats on skipped failure warnings should provide enough information to
let users/admins/developers know whether something is wrong and point
them in the right direction for debugging, bpftracing etc.
Limit allocation failure warnings to one spew every ten seconds.
Link: http://lkml.kernel.org/r/20191028194906.26899-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ville Syrjälä [Wed, 6 Nov 2019 05:16:48 +0000 (21:16 -0800)]
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
I got some khugepaged spew on a 32bit x86:
BUG: sleeping function called from invalid context at include/linux/mmu_notifier.h:346
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 25, name: khugepaged
INFO: lockdep is turned off.
CPU: 1 PID: 25 Comm: khugepaged Not tainted 5.4.0-rc5-elk+ #206
Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009
Call Trace:
dump_stack+0x66/0x8e
___might_sleep.cold.96+0x95/0xa6
__might_sleep+0x2e/0x80
collapse_huge_page.isra.51+0x5ac/0x1360
khugepaged+0x9a9/0x20f0
kthread+0xf5/0x110
ret_from_fork+0x2e/0x38
Looks like it's due to CONFIG_HIGHPTE=y pte_offset_map()->kmap_atomic()
vs. mmu_notifier_invalidate_range_start(). Let's do the naive approach
and just reorder the two operations.
Link: http://lkml.kernel.org/r/20191029201513.GG1208@intel.com Fixes: 8b5f461ebd1003 ("mm/mmu_notifiers: annotate with might_sleep()") Signed-off-by: Ville Syrjl <ville.syrjala@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Wed, 6 Nov 2019 05:16:44 +0000 (21:16 -0800)]
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
pagetypeinfo_showfree_print is called by zone->lock held in irq mode.
This is not really nice because it blocks both any interrupts on that
cpu and the page allocator. On large machines this might even trigger
the hard lockup detector.
Considering the pagetypeinfo is a debugging tool we do not really need
exact numbers here. The primary reason to look at the outuput is to see
how pageblocks are spread among different migratetypes and low number of
pages is much more interesting therefore putting a bound on the number
of pages on the free_list sounds like a reasonable tradeoff.
The new output will simply tell
[...]
Node 6, zone Normal, type Movable >100000 >100000 >100000 >100000 41019 31560 23996 10054 3229 983 648
instead of
Node 6, zone Normal, type Movable 399568 294127 221558 102119 41019 31560 23996 10054 3229 983 648
The limit has been chosen arbitrary and it is a subject of a future
change should there be a need for that.
While we are at it, also drop the zone lock after each free_list
iteration which will help with the IRQ and page allocator responsiveness
even further as the IRQ lock held time is always bound to those 100k
pages.
[akpm@linux-foundation.org: tweak comment text, per David Hildenbrand] Link: http://lkml.kernel.org/r/20191025072610.18526-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Waiman Long <longman@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mel Gorman <mgorman@suse.de> Cc: Roman Gushchin <guro@fb.com> Cc: Song Liu <songliubraving@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Wed, 6 Nov 2019 05:16:40 +0000 (21:16 -0800)]
mm, vmstat: hide /proc/pagetypeinfo from normal users
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org Fixes: 0397be336e9e ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Waiman Long <longman@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Waiman Long <longman@redhat.com> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Jann Horn <jannh@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jason Gunthorpe [Wed, 6 Nov 2019 05:16:37 +0000 (21:16 -0800)]
mm/mmu_notifiers: use the right return code for WARN_ON
The return code from the op callback is actually in _ret, while the
WARN_ON was checking ret which causes it to misfire.
Link: http://lkml.kernel.org/r/20191025175502.GA31127@ziepe.ca Fixes: fafe3afb7a8e ("mm/mmu_notifiers: check if mmu notifier callbacks are allowed to fail") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This issue can be reproduced every week in a production environment.
This issue is related to the usage mode. If others use ocfs2 in this
mode, the kernel will panic frequently.
[akpm@linux-foundation.org: coding style fixes]
[Fix new warning due to unused function by removing said function - Linus ] Link: http://lkml.kernel.org/r/1568772175-2906-2-git-send-email-sunny.s.zhang@oracle.com Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Wed, 6 Nov 2019 05:16:30 +0000 (21:16 -0800)]
mm: thp: handle page cache THP correctly in PageTransCompoundMap
We have a usecase to use tmpfs as QEMU memory backend and we would like
to take the advantage of THP as well. But, our test shows the EPT is
not PMD mapped even though the underlying THP are PMD mapped on host.
The number showed by /sys/kernel/debug/kvm/largepage is much less than
the number of PMD mapped shmem pages as the below:
And some benchmarks do worse than with anonymous THPs.
By digging into the code we figured out that commit 0b9f3899d79a ("mm:
thp: kvm: fix memory corruption in KVM with THP enabled") checks if
there is a single PTE mapping on the page for anonymous THP when setting
up EPT map. But the _mapcount < 0 check doesn't work for page cache THP
since every subpage of page cache THP would get _mapcount inc'ed once it
is PMD mapped, so PageTransCompoundMap() always returns false for page
cache THP. This would prevent KVM from setting up PMD mapped EPT entry.
So we need handle page cache THP correctly. However, when page cache
THP's PMD gets split, kernel just remove the map instead of setting up
PTE map like what anonymous THP does. Before KVM calls get_user_pages()
the subpages may get PTE mapped even though it is still a THP since the
page cache THP may be mapped by other processes at the mean time.
Checking its _mapcount and whether the THP has PTE mapped or not.
Although this may report some false negative cases (PTE mapped by other
processes), it looks not trivial to make this accurate.
With this fix /sys/kernel/debug/kvm/largepage would show reasonable
pages are PMD mapped by EPT as the below:
[yang.shi@linux.alibaba.com: v4] Link: http://lkml.kernel.org/r/1571865575-42913-1-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1571769577-89735-1-git-send-email-yang.shi@linux.alibaba.com Fixes: b93b9b57b171 ("rmap: support file thp") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reported-by: Gang Deng <gavin.dg@linux.alibaba.com> Tested-by: Gang Deng <gavin.dg@linux.alibaba.com> Suggested-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Wed, 6 Nov 2019 05:16:27 +0000 (21:16 -0800)]
mm, meminit: recalculate pcpu batch and high limits after init completes
Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list. As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.
This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone. A private report indicated that kernel build
times were excessive with extremely high system CPU usage. A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.
This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system. It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.
mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.
John Hubbard [Wed, 6 Nov 2019 05:16:24 +0000 (21:16 -0800)]
mm/gup_benchmark: fix MAP_HUGETLB case
The MAP_HUGETLB ("-H" option) of gup_benchmark fails:
$ sudo ./gup_benchmark -H
mmap: Invalid argument
This is because gup_benchmark.c is passing in a file descriptor to
mmap(), but the fd came from opening up the /dev/zero file. This
confuses the mmap syscall implementation, which thinks that, if the
caller did not specify MAP_ANONYMOUS, then the file must be a huge page
file. So it attempts to verify that the file really is a huge page
file, as you can see here:
ksys_mmap_pgoff()
{
if (!(flags & MAP_ANONYMOUS)) {
retval = -EINVAL;
if (unlikely(flags & MAP_HUGETLB && !is_file_hugepages(file)))
goto out_fput; /* THIS IS WHERE WE END UP */
else if (flags & MAP_HUGETLB) {
...proceed normally, /dev/zero is ok here...
...and of course is_file_hugepages() returns "false" for the /dev/zero
file.
The problem is that the user space program, gup_benchmark.c, really just
wants anonymous memory here. The simplest way to get that is to pass
MAP_ANONYMOUS whenever MAP_HUGETLB is specified, so that's what this
patch does.
Link: http://lkml.kernel.org/r/20191021212435.398153-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jérôme Glisse <jglisse@redhat.com> Cc: Keith Busch <keith.busch@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Wed, 6 Nov 2019 05:16:21 +0000 (21:16 -0800)]
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
__mem_cgroup_free() can be called on the failure path in
mem_cgroup_alloc(). However memcg_flush_percpu_vmstats() and
memcg_flush_percpu_vmevents() which are called from __mem_cgroup_free()
access the fields of memcg which can potentially be null if called from
failure path from mem_cgroup_alloc(). Indeed syzbot has reported the
following crash:
Dragos Tarcatu [Wed, 6 Nov 2019 14:58:16 +0000 (08:58 -0600)]
ASoC: SOF: topology: Fix bytes control size checks
When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:
[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411
Fix that by rejecting the topology if the bytes data size > max_size
Fixes: 623b3c4abb2be ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds [Tue, 5 Nov 2019 17:44:02 +0000 (09:44 -0800)]
Merge tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 stack argument update from Christian Brauner:
"This changes clone3() to do basic stack validation and to set up the
stack depending on whether or not it is growing up or down.
With clone3() the expectation is now very simply that the .stack
argument points to the lowest address of the stack and that
.stack_size specifies the initial stack size. This is diferent from
legacy clone() where the "stack" argument had to point to the lowest
or highest address of the stack depending on the architecture.
clone3() was released with 5.3. Currently, it is not documented and
very unclear to userspace how the stack and stack_size argument have
to be passed. After talking to glibc folks we concluded that changing
clone3() to determine stack direction and doing basic validation is
the right course of action.
Note, this is a potentially user visible change. In the very unlikely
case, that it breaks someone's use-case we will revert. (And then e.g.
place the new behavior under an appropriate flag.)
Note that passing an empty stack will continue working just as before.
Breaking someone's use-case is very unlikely. Neither glibc nor musl
currently expose a wrapper for clone3(). There is currently also no
real motivation for anyone to use clone3() directly. First, because
using clone{3}() with stacks requires some assembly (see glibc and
musl). Second, because it does not provide features that legacy
clone() doesn't. New features for clone3() will first happen in v5.5
which is why v5.4 is still a good time to try and make that change now
and backport it to v5.3.
I did a codesearch on https://codesearch.debian.net, github, and
gitlab and could not find any software currently relying directly on
clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
which was a request coming from glibc at which point they'll likely
start using it"
* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
clone3: validate stack arguments
Linus Torvalds [Tue, 5 Nov 2019 17:23:08 +0000 (09:23 -0800)]
Merge tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"More GPIO fixes! We found a late regression in the Intel Merrifield
driver. Oh well. We fixed it up.
- Fix a build error in the tools used for kselftest
- A series of reverts to bring the Intel Merrifield back to working.
We will likely unrevert the reverts for v5.5 but we can't have v5.4
broken"
* tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: merrifield: Pass irqchip when adding gpiochip"
Revert "gpio: merrifield: Restore use of irq_base"
Revert "gpio: merrifield: Move hardware initialization to callback"
tools: gpio: Use !building_out_of_srctree to determine srctree
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
Takashi Iwai [Tue, 5 Nov 2019 13:43:16 +0000 (14:43 +0100)]
ALSA: hda/ca0132 - Fix possible workqueue stall
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
drm/i915/dp: Do not switch aux to TBT mode for non-TC ports
Non-TC ports always have tc_mode == TC_PORT_TBT_ALT so it was
switching aux to TBT mode for all combo-phy ports, happily this did
not caused any issue but is better follow BSpec.
Also this is reserved bit before ICL.
Imre Deak [Mon, 28 Oct 2019 18:15:17 +0000 (20:15 +0200)]
drm/i915: Avoid HPD poll detect triggering a new detect cycle
For the HPD interrupt functionality the HW depends on power wells in the
display core domain to be on. Accordingly when enabling these power
wells the HPD polling logic will force an HPD detection cycle to account
for hotplug events that may have happened when such a power well was
off.
Thus a detect cycle started by polling could start a new detect cycle if
a power well in the display core domain gets enabled during detect and
stays enabled after detect completes. That in turn can lead to a
detection cycle runaway.
To prevent re-triggering a poll-detect cycle make sure we drop all power
references we acquired during detect synchronously by the end of detect.
This will let the poll-detect logic continue with polling (matching the
off state of the corresponding power wells) instead of scheduling a new
detection cycle.
Fixes: 34e95d9cc5df ("drm/i915: Remove the unneeded AUX power ref from intel_dp_detect()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112125 Reported-and-tested-by: Val Kulkov <val.kulkov@gmail.com> Reported-and-tested-by: wangqr <wqr.prg@gmail.com> Cc: Val Kulkov <val.kulkov@gmail.com> Cc: wangqr <wqr.prg@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191028181517.22602-1-imre.deak@intel.com
(cherry picked from commit a8ddac7c9f06a12227a4f5febd1cbe0575a33179) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stephen Boyd [Mon, 4 Nov 2019 17:59:16 +0000 (09:59 -0800)]
Merge tag 'clk-v5.4-samsung-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-fixes
Pull Samsung clk driver fixes from Sylwester Nawrocki:
- system suspend related fixes for the exynos542x clocks driver
- probe() error paths fixes in the exynos5433 CMU driver adding
proper release of memory and clk resources
* tag 'clk-v5.4-samsung-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU
clk: samsung: exynos5433: Fix error paths
Stephen Boyd [Mon, 4 Nov 2019 17:57:48 +0000 (09:57 -0800)]
Merge tag 'sunxi-clk-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes
Two patches that fix some operator precedence and zeroing of bits
* tag 'sunxi-clk-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
Tony Lindgren [Mon, 30 Sep 2019 15:40:01 +0000 (08:40 -0700)]
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
Commit 16e68c8389db ("clk: ti: clkctrl: use fallback udelay approach if
timekeeping is suspended") added handling for cases when timekeeping is
suspended. But looks like we can still get occasional "failed to enable"
errors on the PM runtime resume path with udelay() returning faster than
expected.
With ti-sysc interconnect target module driver this leads into device
failure with PM runtime failing with "failed to enable" clkctrl error.
Let's fix the issue with a delay of two times the desired delay as in
often done for udelay() to account for the inaccuracy.
Fixes: 16e68c8389db ("clk: ti: clkctrl: use fallback udelay approach if timekeeping is suspended") Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lkml.kernel.org/r/20190930154001.46581-1-tony@atomide.com Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Kai Vehmanen [Fri, 1 Nov 2019 17:06:35 +0000 (12:06 -0500)]
ASoC: hdac_hda: fix race in device removal
When ASoC card instance is removed containing a HDA codec,
hdac_hda_codec_remove() may run in parallel with codec resume.
This will cause problems if the HDA link is freed with
snd_hdac_ext_bus_link_put() while the codec is still in
middle of its resume process.
To fix this, change the order such that pm_runtime_disable()
is called before the link is freed. This will ensure any
pending runtime PM action is completed before proceeding
to free the link.
This issue can be easily hit with e.g. SOF driver by loading and
unloading the drivers.
When the compiler decides not to inline the Chunky-to-Planar core
functions, the build fails with:
c2p_planar.c:(.text+0xd6): undefined reference to `c2p_unsupported'
c2p_planar.c:(.text+0x1dc): undefined reference to `c2p_unsupported'
c2p_iplan2.c:(.text+0xc4): undefined reference to `c2p_unsupported'
c2p_iplan2.c:(.text+0x150): undefined reference to `c2p_unsupported'
Fix this by marking the functions __always_inline.
While this could be triggered before by manually enabling both
CONFIG_OPTIMIZE_INLINING and CONFIG_CC_OPTIMIZE_FOR_SIZE, it was exposed
in the m68k defconfig by commit bfab67995487eb20 ("compiler: enable
CONFIG_OPTIMIZE_INLINING forcibly").
Fixes: f9797d32f5a303ca ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING") Reported-by: noreply@ellerman.id.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190927094708.11563-1-geert@linux-m68k.org
ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
It has been established that this causes a boot regression on
both Baytrail and Cherrytrail SoCs, and we can't have that in
the final kernel release, so we need to revert it.
Reported-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Sun, 3 Nov 2019 16:25:25 +0000 (08:25 -0800)]
Merge tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"The USB sub-maintainers woke up this past week and sent a bunch of
tiny fixes. Here are a lot of small patches that that resolve a bunch
of reported issues in the USB core, drivers, serial drivers, gadget
drivers, and of course, xhci :)
All of these have been in linux-next with no reported issues"
* tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host
usb: cdns3: gadget: reset EP_CLAIMED flag while unloading
USB: serial: whiteheat: fix line-speed endianness
USB: serial: whiteheat: fix potential slab corruption
USB: gadget: Reject endpoints with 0 maxpacket value
UAS: Revert commit 18615eb8a2ac ("UAS: fix alignment of scatter/gather segments")
usb-storage: Revert commit 4fd9527839f3 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
usbip: Fix free of unallocated memory in vhci tx
usbip: tools: Fix read_usb_vudc_device() error path handling
usb: xhci: fix __le32/__le64 accessors in debugfs code
usb: xhci: fix Immediate Data Transfer endianness
xhci: Fix use-after-free regression in xhci clear hub TT implementation
USB: ldusb: fix control-message timeout
USB: ldusb: use unsigned size format specifiers
USB: ldusb: fix ring-buffer locking
USB: Skip endpoints with 0 maxpacket length
usb: cdns3: gadget: Don't manage pullups
usb: dwc3: remove the call trace of USBx_GFLADJ
usb: gadget: configfs: fix concurrent issue between composite APIs
...
Hans de Goede [Sun, 20 Oct 2019 21:47:18 +0000 (23:47 +0200)]
HID: i2c-hid: Send power-on command after reset
Before commit 0fa4bc4318c5 ("HID: i2c-hid: Remove runtime power
management"), any i2c-hid touchscreens would typically be runtime-suspended
between the driver loading and Xorg or a Wayland compositor opening it,
causing it to be resumed again. This means that before this change,
we would call i2c_hid_set_power(OFF), i2c_hid_set_power(ON) before the
graphical session would start listening to the touchscreen.
It turns out that at least some SIS touchscreens, such as the one found
on the Asus T100HA, need a power-on command after reset, otherwise they
will not send any events.
Fixes: 0fa4bc4318c5 ("HID: i2c-hid: Remove runtime power management") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Sat, 2 Nov 2019 18:28:59 +0000 (11:28 -0700)]
Merge tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix read timeout problem in ina3221 driver
- Fix wrong bitmask in nct7904 driver
* tag 'hwmon-for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ina3221) Fix read timeout issue
hwmon: (nct7904) Fix the incorrect value of vsen_mask & tcpu_mask & temp_mode in nct7904_data struct.
Linus Torvalds [Sat, 2 Nov 2019 18:23:09 +0000 (11:23 -0700)]
Merge tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"It turned out that relying solely on drivers storing all the PWM state
in hardware was a little premature and causes a number of subtle (and
some not so subtle) regressions. Revert the offending patch for now"
* tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
Revert "pwm: Let pwm_get_state() return the last implemented state"
Linus Torvalds [Sat, 2 Nov 2019 18:15:52 +0000 (11:15 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
and one core change in sd that fixes an I/O failure on DIF type 3
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: stop timer in shutdown path
scsi: sd: define variable dif as unsigned int instead of bool
scsi: target: cxgbit: Fix cxgbit_fw4_ack()
scsi: qla2xxx: Fix partial flash write of MBI
scsi: qla2xxx: Initialized mailbox to prevent driver load failure
scsi: lpfc: Honor module parameter lpfc_use_adisc
scsi: ufs-bsg: Wake the device before sending raw upiu commands
scsi: lpfc: Check queue pointer before use
scsi: qla2xxx: fixup incorrect usage of host_byte
Linus Torvalds [Sat, 2 Nov 2019 18:08:19 +0000 (11:08 -0700)]
Merge tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Our recent cleanup of EEH led to an oops on bare metal machines when
the cxl (CAPI) driver creates virtual devices for an attached FPGA
accelerator.
The "secure virtual machine" support we added in v5.4 had a bug if the
kernel was relocated (moved during boot), in those cases the signature
of the kernel text wouldn't verify and the Ultravisor would refuse to
run the VM.
A recent change to disable interrupts before calling
arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline
code to always trigger.
The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the
address range crossed a segment (256MB) boundary which could lead to
spurious faults.
Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson,
Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann"
* tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix CPU idle to be called with IRQs disabled
powerpc/prom_init: Undo relocation before entering secure mode
powerpc/powernv/eeh: Fix oops when probing cxl devices
powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
Linus Torvalds [Sat, 2 Nov 2019 18:00:26 +0000 (11:00 -0700)]
Merge tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix cpu idle time accounting
- Fix stack unwinder case when both pt_regs and sp are specified
- Fix information leak via cmm timeout proc handler
* tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/idle: fix cpu idle time calculation
s390/unwind: fix mixing regs and sp
s390/cmm: fix information leak in cmm_timeout_handler()
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
Linus Torvalds [Sat, 2 Nov 2019 00:37:44 +0000 (17:37 -0700)]
Merge tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"This contains two delegation fixes (with the RCU lock leak fix marked
for stable), and three patches to fix destroying the the sunrpc back
channel.
Stable bugfixes:
- Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
Other fixes:
- The TCP back channel mustn't disappear while requests are
outstanding
- The RDMA back channel mustn't disappear while requests are
outstanding
- Destroy the back channel when we destroy the host transport
- Don't allow a cached open with a revoked delegation"
* tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
NFSv4: Don't allow a cached open with a revoked delegation
SUNRPC: Destroy the back channel when we destroy the host transport
SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
Linus Torvalds [Sat, 2 Nov 2019 00:33:12 +0000 (17:33 -0700)]
Merge tag 'for-linus-20191101' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two small nvme fixes, one is a fabrics connection fix, the other one
a cleanup made possible by that fix (Anton, via Keith)
- Fix requeue handling in umb ubd (Anton)
- Fix spin_lock_irq() nesting in blk-iocost (Dan)
- Three small io_uring fixes:
- Install io_uring fd after done with ctx (me)
- Clear ->result before every poll issue (me)
- Fix leak of shadow request on error (Pavel)
* tag 'for-linus-20191101' of git://git.kernel.dk/linux-block:
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linus Torvalds [Sat, 2 Nov 2019 00:20:53 +0000 (17:20 -0700)]
Merge tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"One fix for PCIe users:
- Fix legacy PCI I/O port access emulation
One set of cleanups:
- Resolve most of the warnings generated by sparse across arch/riscv.
No functional changes
And one MAINTAINERS update:
- Update Palmer's E-mail address"
* tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Change to my personal email address
RISC-V: Add PCIe I/O BAR memory mapping
riscv: for C functions called only from assembly, mark with __visible
riscv: fp: add missing __user pointer annotations
riscv: add missing header file includes
riscv: mark some code and data as file-static
riscv: init: merge split string literals in preprocessor directive
riscv: add prototypes for assembly language functions from head.S
Jakub Kicinski [Fri, 1 Nov 2019 03:07:00 +0000 (20:07 -0700)]
net: fix installing orphaned programs
When netdevice with offloaded BPF programs is destroyed
the programs are orphaned and removed from the program
IDA - their IDs get released (the programs may remain
accessible via existing open file descriptors and pinned
files). After IDs are released they are set to 0.
This confuses dev_change_xdp_fd() because it compares
the __dev_xdp_query() result where 0 means no program
with prog->aux->id where 0 means orphaned.
dev_change_xdp_fd() would have incorrectly returned success
even though it had not installed the program.
Since drivers already catch this case via bpf_offload_dev_match()
let them handle this case. The error message drivers produce in
this case ("program loaded for a different device") is in fact
correct as the orphaned program must had to be loaded for a
different device.
Fixes: 5cb5cb68b057 ("net: Don't call XDP_SETUP_PROG when nothing is changed") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:06:59 +0000 (20:06 -0700)]
net: cls_bpf: fix NULL deref on offload filter removal
Commit 09a5b0aafd51 ("net: sched: refactor block offloads counter
usage") missed the fact that either new prog or old prog may be
NULL.
Fixes: 09a5b0aafd51 ("net: sched: refactor block offloads counter usage") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 1 Nov 2019 03:06:58 +0000 (20:06 -0700)]
selftests: bpf: Skip write only files in debugfs
DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.
Note that we can't use os.access() because the script requires
root.
Fixes: e095a5a4a3b5 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes: 294f16fc4d45 ("soreuseport: test mixed v4/v6 sockets") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Cc: Craig Gallek <cgallek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 31 Oct 2019 23:10:21 +0000 (00:10 +0100)]
r8169: fix wrong PHY ID issue with RTL8168dp
As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.
Fixes: c7a4b304c4eb ("r8169: use phy_resume/phy_suspend") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 31 Oct 2019 22:54:05 +0000 (15:54 -0700)]
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes: 875ec329cfcf ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 31 Oct 2019 22:42:26 +0000 (15:42 -0700)]
net: phylink: Fix phylink_dbg() macro
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.
Fixes: be737870d068 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yangchun Fu [Fri, 1 Nov 2019 17:09:56 +0000 (10:09 -0700)]
gve: Fixes DMA synchronization.
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <yangchun@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 1 Nov 2019 17:32:19 +0000 (10:32 -0700)]
inet: stop leaking jiffies on the wire
Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.
RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.
Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.
Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.
Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Thiemo Nagel <tnagel@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Nov 2019 21:50:27 +0000 (14:50 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-11-01
This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.
Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine. So change the read error into a
warn while the device is still present.
Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it. So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.
I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.
Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.
Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.
Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.
v2: Fixed alignment issue in patch 3 of the series based on community
feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Pylypiv [Fri, 4 Oct 2019 06:53:57 +0000 (23:53 -0700)]
ixgbe: Remove duplicate clear_bit() call
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
These asterisks were once references to a line that said:
"* Other names and brands may be claimed as the property of others."
But now, they serve no purpose; they can only irritate the reader.
Fixes: c3c0ca653b39 ("e1000: update README for e1000") Fixes: a248654d9f14 ("e100.txt: Cleanup license info in kernel doc") Fixes: c31d7b80052e ("e1000e.txt: Add e1000e documentation") Fixes: 258d70d3cbfd ("Documentation: fm10k: Add kernel documentation") Fixes: cda7ed94ee4e ("igb.txt: Add igb documentation") Fixes: 3e696ba4e222 ("igbvf.txt: Add igbvf Documentation") Fixes: 0f3259171b1a ("Documentation/networking/: Update Intel wired LAN driver documentation") Fixes: e14bc305527e ("ixgbevf.txt: Update ixgbevf documentation") Fixes: 3fa895fc6197 ("Documentation: i40e: Prepare documentation for RST conversion") Fixes: 051803291273 ("i40evf: add driver to kernel build system") Fixes: 5d0aaef7ac3f ("Documentation: ice: Prepare documentation for RST conversion") Fixes: d56fd88c18e5 ("ionic: Add basic framework for IONIC Network device driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Wenwen Wang [Mon, 12 Aug 2019 05:59:21 +0000 (00:59 -0500)]
e1000: fix memory leaks
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jeff Kirsher [Mon, 7 Oct 2019 22:07:24 +0000 (15:07 -0700)]
i40e: Fix receive buffer starvation for AF_XDP
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable". So clean up the undesired
code in the disable function.
CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: fceee18ac987 ("i40e: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Manfred Rudigier [Thu, 15 Aug 2019 20:55:20 +0000 (13:55 -0700)]
igb: Fix constant media auto sense switching when no cable is connected
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Linus Torvalds [Fri, 1 Nov 2019 18:49:54 +0000 (11:49 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix two scheduler topology bugs/oversights on Juno r0 2+4 big.LITTLE
systems"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/topology: Allow sched_asym_cpucapacity to be disabled
sched/topology: Don't try to build empty sched domains
Linus Torvalds [Fri, 1 Nov 2019 18:40:47 +0000 (11:40 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes: an ABI fix for a reserved field, AMD IBS fixes, an Intel
uncore PMU driver fix and a header typo fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/headers: Fix spelling s/EACCESS/EACCES/, s/privilidge/privilege/
perf/x86/uncore: Fix event group support
perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
perf/core: Start rejecting the syscall with attr.__reserved_2 set
Linus Torvalds [Fri, 1 Nov 2019 18:32:50 +0000 (11:32 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Various fixes all over the map: prevent boot crashes on HyperV,
classify UEFI randomness as bootloader randomness, fix EFI boot for
the Raspberry Pi2, fix efi_test permissions, etc"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMIN
x86, efi: Never relocate kernel below lowest acceptable address
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
efi/random: Treat EFI_RNG_PROTOCOL output as bootloader randomness
efi/tpm: Return -EINVAL when determining tpm final events log size fails
efi: Make CONFIG_EFI_RCI2_TABLE selectable on x86 only
David S. Miller [Fri, 1 Nov 2019 17:36:46 +0000 (10:36 -0700)]
Merge tag 'wireless-drivers-2019-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Third set of fixes for 5.4. Most of them are for iwlwifi but important
fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being
most important.
iwlwifi
* fix merge damage on earlier patch
* various fixes to device id handling
* fix scan config command handling which caused firmware asserts
rtlwifi
* fix overflow on P2P IE handling
* don't deliver too small frames to mac80211
mt76
* disable PCIE_ASPM
* fix buffer DMA unmap on certain cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 1 Nov 2019 17:03:46 +0000 (10:03 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"These are almost exclusively related to CPU errata in CPUs from
Broadcom and Qualcomm where the workarounds were either not being
enabled when they should have been or enabled when they shouldn't have
been.
The only "interesting" fix is ensuring that writeable, shared mappings
are initially mapped as clean since we inadvertently broke the logic
back in v4.14 and then noticed the problem via code inspection the
other day.
The only critical issue we have outstanding is a sporadic NULL
dereference in the scheduler, which doesn't appear to be
arm64-specific and PeterZ is tearing his hair out over it at the
moment.
Summary:
- Enable CPU errata workarounds for Broadcom Brahma-B53
- Enable CPU errata workarounds for Qualcomm Hydra/Kryo CPUs
- Fix initial dirty status of writeable, shared mappings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
arm64: Brahma-B53 is SSB and spectre v2 safe
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
arm64: cpufeature: Enable Qualcomm Falkor/Kryo errata 1003
arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default
Linus Torvalds [Fri, 1 Nov 2019 16:54:38 +0000 (09:54 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"generic:
- fix memory leak on failure to create VM
x86:
- fix MMU corner case with AMD nested paging disabled"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
kvm: call kvm_arch_destroy_vm if vm creation fails
kvm: Allocate memslots and buses before calling kvm_arch_init_vm
projects / kernel.git / log