Olivier Deprez [Tue, 25 May 2021 09:56:01 +0000 (11:56 +0200)]
fix(fvp): op-tee sp manifest doesn't map gicd
Following I2d274fa897171807e39b0ce9c8a28824ff424534:
Remove GICD registers S2 mapping from OP-TEE partition when it runs in a
secure partition on top of Hafnium.
The partition is not meant to access the GIC directly but use the
Hafnium provided interfaces.
Cortex-A710 erratum 2282622 is a Cat B erratum that applies to revisions
r0p0, r1p0, and r2p0, and is fixed in r2p1. The workaround is to set
CPUACTLR2_EL1[0] to 1, which will force PLDW/PFRM ST to behave like
PLD/PRFM LD and not cause invalidations to other PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ic48409822536e9eacc003300036a1f0489593020
Merge changes I18d47384,Icc3c7424,I73f20d82,I07325644,Iff10ad26, ... into integration
* changes:
fix(zynqmp): query node status to power up APU
feat(zynqmp): pm_api_clock_get_num_clocks cleanup
feat(zynqmp): add feature check support
fix(zynqmp): use common interface for eemi apis
feat(zynqmp): add support to get info of xilfpga
feat(zynqmp): pass ioctl calls to firmware
Yann Gautier [Wed, 9 Feb 2022 16:35:45 +0000 (17:35 +0100)]
fix(st-pmic): add static const to pmic_ops
The static was found by sparse tool:
drivers/st/pmic/stm32mp_pmic.c:456:18: warning: symbol 'pmic_ops'
was not declared. Should it be static?
The const was also missing.
When the atf-handoff-params are updated we are returning
FSBL_HANDOFF_SUCCESS, but the return condition is wrongly
updated and added a error log which is incorrect.
Fixing the incorrect log message.
Yann Gautier [Wed, 2 Mar 2022 13:31:55 +0000 (14:31 +0100)]
refactor(st): configure UART baudrate
Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Yann Gautier [Mon, 28 Feb 2022 17:28:06 +0000 (18:28 +0100)]
feat(st-uart): manage oversampling by 8
UART oversampling by 8 allows higher baud rates for UART. This is
required when (UART freq / baudrate) <= 16. In this case the OVER8 bit
needs to be enabled in CR1 register. And the BRR register management is
different:
USARTDIV = (2 * UART freq / baudrate) (with div round nearest)
BRR[15:4] = USARTDIV[15:4]
BRR[3] = 0
BRR[2:0] = USARTDIV[3:0] >> 1
Yann Gautier [Mon, 28 Feb 2022 16:29:49 +0000 (17:29 +0100)]
fix(st-uart): correctly fill BRR register
To get the nearest divisor for BRR register, we use:
Divisor = (Uart clock + (baudrate / 2)) / baudrate
But lsl was wrongly used instead of lsr to have the division by 2.
Yann Gautier [Fri, 4 Mar 2022 10:08:47 +0000 (11:08 +0100)]
fix(st-clock): initialize pllcfg table
The issue was found by Coverity:
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL4]" when calling
"stm32mp1_check_pll_conf".
CID 376582: (UNINIT)
Using uninitialized value "*pllcfg[_PLL3]" when calling
"stm32mp1_check_pll_conf".
Ronak Jain [Tue, 21 Dec 2021 09:39:59 +0000 (01:39 -0800)]
feat(zynqmp): add feature check support
This API returns version of supported APIs.
Here, there are three cases to check API version by using feature
check implementation.
1. Completely implemented in TF-A: I mean the EEMI APIs which are
completely implemented in the TF-A only. So check those IDs and
return appropriate version for the same. Right now, it is base
version.
2. Completely implemented in firmware: I mean the EEMI APIs which are
completely implemented in the firmware only. Here, TF-A only passes
Linux request to the firmware to get the version of supported API. So
check those IDs and send request to firmware to get the version and
return to Linux if the version is supported or return the error code
if the feature is not supported.
3. Partially implemented (Implemented in TF-A and firmware both):
First check dependent EEMI API version with the expected version in
the TF-A. If the dependent EEMI API is supported in firmware then
return its version and check with the expected version in the TF-A.
If the version matches then check for the actual requested EEMI API
version. If the version is supported then return version of API
implemented in TF-A.
Ronak Jain [Fri, 21 Jan 2022 07:11:18 +0000 (23:11 -0800)]
fix(zynqmp): use common interface for eemi apis
Currently all EEMI API has its own implementation in TF-A which is
redundant. Most EEMI API implementation in TF-A does same work. It
prepares payload received from kernel, sends payload to firmware,
receives response from firmware and send response back to kernel.
So use common interface for EEMI APIs which has similar functionality.
This will optimize TF-A code.
Rajan Vaja [Tue, 12 Oct 2021 10:30:09 +0000 (03:30 -0700)]
feat(zynqmp): pass ioctl calls to firmware
Firmware supports new IOCTL for different purposes. To avoid
maintaining new IOCTL IDs in ATF, pass IOCTL call to firmware
for IOCTL IDs implemented in firmware.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Change-Id: Ie14697c8da9581b0f695f4d33f05161ece558385
refactor(mbedtls): allow platform to specify their config file
Common mbedTLS implementation include the fixed configuration
file of mbedTLS and that does not gives flexilibility to the
platform to include their own mbedTLS configuration.
Hence changes are done so that platform can include their own
mbedTLS configuration file.
Channa Kadabi [Mon, 28 Feb 2022 21:35:16 +0000 (13:35 -0800)]
fix(ufs): don't zero out buf before ufs read
ufs_read_blocks always zeros out the buffer before passing
to UFS for DMA. We don't need to zero out buf before reading
from UFS storage, this change remove the memset in ufs_read_blocks.
Yann Gautier [Mon, 28 Feb 2022 10:39:56 +0000 (11:39 +0100)]
fix(stm32mp1): fix enum prints
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. But the current version of
compiler used in CI states that this parameter is signed. Just cast the
value then.
Merge changes I75b3e3bf,I4cf9f1d9,I50d2ae74,Idbe62410,I84bbd06e, ... into integration
* changes:
fix(intel): null pointer handling for resp_len
fix(intel): define macros to handle buffer entries
fix(intel): change SMC return arguments for INTEL_SIP_SMC_MBOX_SEND_CMD
fix(intel): always set doorbell to SDM after sending command
fix(intel): fix bit masking issue in intel_secure_reg_update
fix(intel): fix ddr address range checker
build(changelog): add new scope for Intel platform
Yann Gautier [Mon, 28 Feb 2022 10:34:05 +0000 (11:34 +0100)]
fix(st-clock): print enums as unsigned
With gcc-11, the -Wformat-signedness warning complains about enum values
that should be printed as unsigned values. Change %d to %u for several
lines in the clock driver.
fix(cert_create): let distclean Makefile target remove the cert_create tool
For some targets, Make recursively invokes itself in subdirectories.
When delegating the distclean target to tools/cert_create/Makefile,
the submake is called with the clean target instead of realclean.
Because of this, the submake never removes the cert_create executable.
A proper but more intrusive fix would
* avoid confusion about the semantics by following traditions or using
new names
https://www.gnu.org/prep/standards/standards.html#Standard-Targets
* avoid typing errors with the special $@ variable.
Something like:
In tools/cert_create/Makefile:
mostlyclean:
# Remove most objects but keep some results.
$(call SHELL_DELETE_ALL, src/build_msg.o ${OBJECTS})
clean: mostlyclean
# mostlyclean, then remove things built by Make.
$(call SHELL_DELETE,${BINARY})
distclean: clean
# clean, then remove things built by ./configure (none here).
realclean maintainer-clean: distclean
# distclean, then remove things built by autootols (none here).
johpow01 [Mon, 14 Feb 2022 03:00:10 +0000 (21:00 -0600)]
fix(errata): workaround for Cortex-A510 erratum 2250311
Cortex-A510 erratum 2250311 is a Cat B erratum that applies to revisions
r0p0, r0p1, r0p2, r0p3 and r1p0 and is fixed in r1p1.
This erratum workaround is a bit different because it interacts with a
feature supported in TFA. The typical method of implementing an errata
workaround will not work in this case as the MPMM feature would just be
re-enabled by context management at every core power on after being
disabled by the errata framework. So in addition to disabling MPMM, this
workaround also sets a flag in the MPMM runtime framework indicating
that the feature should not be enabled even if ENABLE_MPMM=1.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7805756e65ec90b6ef8af47e200617c9e07a3a7e
Merge changes from topic "bug-fix" into integration
* changes:
fix(nxp-crypto): refine code to avoid hang issue for some of toolchain
build(changelog): add new scope for nxp crypto
fix(lx2): drop erratum A-009810
Tamas Ban [Mon, 10 Jan 2022 14:13:00 +0000 (15:13 +0100)]
fix(measured-boot): add RMM entry to event_log_metadata
Platforms which support Realm world cannot boot up
properly if measured boot is enabled at build time.
An assertions occurs due to the missing RMM entry
in the event_log_metadata array.
Signed-off-by: Tamas Ban <tamas.ban@arm.com>
Change-Id: I172f10a440797f7c9e1bc79dc72242b40c2521ea
On RME-enabled platforms, it is currently not possible to incorporate
mapping of all bl_regions specified in bl31 setup[1] with the
ARM_BL_REGIONS macro defined to 6. Hence increased its count to 7.
Sieu Mun Tang [Sat, 19 Feb 2022 13:49:48 +0000 (21:49 +0800)]
fix(intel): null pointer handling for resp_len
Previous changes from commit #6a659448 updates resp_len from an integer
type to unsigned integer pointer type. This patch adds proper handling
in case resp_len is a null pointer. Resp_len with value 0 are also
changed to NULL to match the type change.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I75b3e3bfbb188d8e7b329ba3b948c23e31dec490
fix(intel): define macros to handle buffer entries
This patch defines a macro to handle Secure Device Manager's (SDM)
pointer to command & response buffer entries and convert them to the
correct physical address.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I4cf9f1d90e0d5ae4e1a2ce84165864b48c2862e7
fix(intel): always set doorbell to SDM after sending command
This patch fixes the mailbox stall issue when sending mailbox command
that is larger than mailbox command FIFO size.
Large mailbox command will be sent to SDM in multiple chunks. HPS will
set doorbell to SDM when command FIFO full (is_doorbell_triggered will
be set to 1) to notify SDM to read the command data from FIFO, so that
HPS can continue to send the next chunk of command data.
However, HPS will not set the doorbell to SDM at the end if the doorbell
have been set earlier due to FIFO full. This will cause SDM mailbox
service stall because it is still waiting for last chunk of command data.
This patch fixes the code to always set the doorbell to SDM at the end
to get rid of stall issue.
This patch fix address range checker to make sure that it does not
errors out on NULL address with size 0. Non-secure software will send
this NULL address if the SMC call doesn't need to pass any address buffer.
Signed-off-by: Abdul Halim, Muhammad Hadi Asyrafi <muhammad.hadi.asyrafi.abdul.halim@intel.com>
Change-Id: I7e492c562a311ba989570c4ed465f845333ec865
johpow01 [Tue, 11 Jan 2022 23:54:41 +0000 (17:54 -0600)]
fix(errata): workaround for Cortex-A510 erratum 2041909
Cortex-A510 erratum 2041909 is a Cat B erratum that applies to revision
r0p2 and is fixed in r0p3. It is also present in r0p0 and r0p1 but there
is no workaround in these revisions.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I7b1498faa0c79488dee0d11d07f6e9f58144e298
johpow01 [Tue, 4 Jan 2022 22:15:18 +0000 (16:15 -0600)]
fix(errata): workaround for Cortex-A510 erratum 1922240
Cortex-A510 erratum 1922240 is a Cat B erratum that applies to revision
r0p0 and is fixed in r0p1.
Since no errata framework code existed for A510 prior to this patch, it
has been added as well. Also some general cleanup changes in the CPU lib
makefile.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2397239
Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: I8c427ef255cb4b38ed3e5c2c7444fcef957277e4
Thierry Bultel [Wed, 1 Dec 2021 10:56:53 +0000 (11:56 +0100)]
feat(allwinner): apx803: add aldo1 regulator
Notice that aldo1 is typically useful for the Olimex A64 board, where
it powers the PE bank through the vcc-pe line.
Without it, it is not possible to light the user led on PE17, for
instance.
Change-Id: I70588bc977b884b22df87f1b075549cb8925925a Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
fix(intel): assert if bl_mem_params is NULL pointer
This patch fixes the code issue detected by Klocwork scan. Pointer
'bl_mem_params' returned from call to function 'get_bl_mem_params_node'
may be NULL and the NULL pointer may be caused the system crash. Update
the code to assert if unexpected NULL pointer is returned.
Jiafei Pan [Thu, 18 Nov 2021 07:49:19 +0000 (15:49 +0800)]
fix(nxp-crypto): refine code to avoid hang issue for some of toolchain
bitfield structure maybe has strict-aliasing issue for some compiler,
for example the old code has hang issue for yocto 3.4 toolchain, so
refine the code to avoid to use bitfield structure.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I6b6d7597311240dd6d6b8ca4ce508c69332f9c68
Merge changes from topic "ls1046a" into integration
* changes:
docs(layerscape): add ls1046a soc and board support
feat(ls1046aqds): add board ls1046aqds support
feat(ls1046afrwy): add ls1046afrwy board support
feat(ls1046ardb): add ls1046ardb board support
feat(ls1046a): add new SoC platform ls1046a
fix(nxp-tools): fix tool location path for byte_swape
fix(nxp-qspi): fix include path for QSPI driver
build(changelog): add new scopes for NXP layerscape platforms
Merge changes from topic "st-format-signedness" into integration
* changes:
feat(stm32mp1): enable format-signedness warning
fix(stm32mp1): correct types in messages
fix(st-pmic): correct verbose message
fix(st-sdmmc2): correct cmd_idx type in messages
fix(st-fmc): fix type in message
fix(mtd): correct types in messages
fix(usb): correct type in message
fix(tzc400): correct message with filter
fix(psci): correct parent_node type in messages
fix(libc): correct some messages
fix(fconf): correct image_id type in messages
fix(bl2): correct messages with image_id
fix(fvp): extend memory map to include all DRAM memory regions
Currently only the lowest 2 DRAM region were configured in the
TrustZone Controller, but the platform supports 6 regions spanning the
whole address space.
Configuring all of them to allow tests to access memory also in those
higher memory regions.
FVP memory map:
https://developer.arm.com/documentation/100964/1116/Base-Platform/Base---memory/Base-Platform-memory-map
Note that last row is wrong, describing a non-existing 56bit address,
all region labels should be shifted upward.
Issue has been reported and next release will be correct.
Tony K Nadackal [Thu, 19 Aug 2021 13:44:11 +0000 (14:44 +0100)]
feat(board/rdedmunds): add support for rdedmunds variant
Add initial support for RD-Edmunds platform. This platform is considered
as a variant of RD-N2 platform with only major change being the CPU
which is Demeter instead of Neoverse-N2.
Signed-off-by: Tony K Nadackal <tony.nadackal@arm.com>
Change-Id: I939d9eac652fa9e76ad002ee5e6107aa79baa013
Merge changes from topic "ea/corstone1000" into integration
* changes:
feat(corstone1000): identify bank to load fip
fix(corstone1000): change base address of FIP in the flash
feat(corstone1000): implement platform specific psci reset
feat(corstone1000): made changes to accommodate 3MB for optee
build(corstone1000): rename diphda to corstone1000
projects / arm-tf.git / log