The clock gate restore context function enables or disables
the gate clocks based on the enable_count. This is done in cases
where the clock context is lost and based on the enable_count
the clock either needs to be enabled/disabled.
Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
clk: Add functions to save/restore clock context en-masse
Deep enough power saving mode can result into losing context of the clock
registers also, and they need to be restored once coming back from the power
saving mode. Hence add functions to save/restore clock context.
Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tero Kristo [Mon, 13 Aug 2018 11:30:49 +0000 (14:30 +0300)]
clk: ti: dra7: add new clkctrl data
The new clkctrl data layout for dra7xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Mon, 13 Aug 2018 08:11:33 +0000 (11:11 +0300)]
clk: ti: dra7xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Mon, 13 Aug 2018 07:48:52 +0000 (10:48 +0300)]
clk: ti: am43xx: add new clkctrl data for am43xx
The new clkctrl data layout for am43xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Mon, 13 Aug 2018 07:38:40 +0000 (10:38 +0300)]
clk: ti: am43xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 10 Aug 2018 15:35:03 +0000 (18:35 +0300)]
clk: ti: am33xx: add new clkctrl data for am33xx
The new clkctrl data layout for am33xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 10 Aug 2018 15:22:02 +0000 (18:22 +0300)]
clk: ti: am33xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Thu, 30 Aug 2018 06:58:31 +0000 (09:58 +0300)]
clk: ti: clkctrl: replace dashes from clkdm name with underscore
The change in the DTS data node naming prevents using underscore
within the node names and force usage of dash instead. On the other
hand, clockdomains use underscore instead of dash, so this must be
replaced within the driver code so that the mapping between the two
can be done properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 10 Aug 2018 08:29:09 +0000 (11:29 +0300)]
clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
Currently, only one clkctrl node can be added under a specific CM node
due to limitation with the implementation. Modify the code to pick-up
clockdomain name from the clkctrl node instead of CM node if provided.
Also, add a new flag to the TI clock driver so that both modes can
be supported simultaneously.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 31 Aug 2018 14:44:09 +0000 (17:44 +0300)]
dt-bindings: clock: dra7xx: add clkctrl indices for new data layout
The new data layout will be split based on clockdomain boundaries, instead
of CM boundaries. This introduces a few new clkctrl providers, that have
different indices for the clkctrl data.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 31 Aug 2018 14:42:31 +0000 (17:42 +0300)]
dt-bindings: clock: am43xx: add clkctrl indices for new data layout
The new data layout will be split based on clockdomain boundaries, instead
of CM boundaries. This introduces a few new clkctrl providers, that have
different indices for the clkctrl data.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Fri, 31 Aug 2018 14:38:57 +0000 (17:38 +0300)]
dt-bindings: clock: am33xx: add clkctrl indices for new data layout
The new data layout will be split based on clockdomain boundaries, instead
of CM boundaries. This introduces a few new clkctrl providers, that have
different indices for the clkctrl data.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
ARM: dts: am335x: add common file for UC-2100 series
The UC-2100 series consists many boards with different peripheral
devices and wireless modules, hence we fetch common items and
create a common dtsi file to increase reusability. All boards in
UC-2100 series will include this common dtsi file.
Signed-off-by: Wes Huang (黃淵河) <wes.huang@moxa.com> Signed-off-by: Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap5: enable OTG role for DWC3 controller
Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).
Tested on OMAP5EVM and Pyra.
Suggested-by: Roger Quadros <rogerq@ti.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Tue, 25 Sep 2018 05:21:51 +0000 (10:51 +0530)]
ARM: dts: dra7: Fix up unaligned access setting for PCIe EP
Bit positions of PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE and
PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE in CTRL_CORE_SMA_SW_7 are
incorrectly documented in the TRM. In fact, the bit positions are
swapped. Update the DT bindings for PCIe EP to reflect the same.
Fixes: 7c9473f8d75a ("ARM: dts: DRA7: Add pcie1 dt node for EP mode") Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Sun, 23 Sep 2018 15:37:17 +0000 (10:37 -0500)]
ARM: dts: am3517-evm: Add support for UI board and Audio
The full AM3517-EVM shipped with an add-on board which contained
two Audio codecs, a GPIO expander with a variety of buttons, and
some other features. This patch enables these portions of the UI
board because they don't directly conflict with existing features.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
am574x-idk has no cpu vdd-supply at the moment. Hence hook smps12
regulator as cpu vdd-supply in am57xx-idk-common as the same regulator
feeds on to cpu on am571/2/4-idks. So remove all the individual
instances and place that in common place.
Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Rob Herring [Thu, 13 Sep 2018 18:12:25 +0000 (13:12 -0500)]
ARM: dts: ti: Fix SPI and I2C bus warnings
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/am437x-idk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am437x-sk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am43x-epos-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/omap3-n9.dtb: Warning (i2c_bus_reg): /ocp@68000000/i2c@48060000/ak8975@0f: I2C bus unit address format error, expected "f"
arch/arm/boot/dts/am335x-osd3358-sm-red.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/pressure@78: I2C bus unit address format error, expected "76"
arch/arm/boot/dts/am335x-boneblack.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am335x-boneblack-wireless.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am335x-sancloud-bbe.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am571x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am572x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am574x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am57xx-cl-som-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am57xx-sbc-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra72-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra72-evm-revc.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra76-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra7-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am335x-pdu001.dtb: Warning (spi_bus_reg): /ocp/spi@481a0000/cfaf240320a032t: SPI bus unit address format error, expected "0"
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi'
Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
[tony@atomide.com: fixed mode to 644 for am335x-osd3358-sm-red.dts while at it] Signed-off-by: Tony Lindgren <tony@atomide.com>
am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.
Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND
GTA04A5 has been produced with MCP chips either with
512MB RAM + 512MB NAND
512MB RAM + 1024MB NAND
1024MB RAM + 512MB OneNAND
RAM setup is done by U-Boot (MLO/SPL) but OneNAND needs
a different setup of the GPMC. So we need to derive a
DTB variant that modifies the gpmc and nand setup.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap3-gta04a5: disable IrDA receiver to save power
The GTA04A5 has an improved IrDA circuit that can enable/disable
the receiver individually. We do not have an IrDA driver/subsystem
and hence the receiver should be actively turned off to save power,
especially in suspend.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap3-gta04: add camera interface parallel port
The GTA04 has an optional OV9655 camera (for which we do
not yet have a driver upstream), but the ISP hardware
connection description in the device tree is independent
of that.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
Vendor defined U-Boot has changed the partition scheme a while ago:
* kernel partition 6MB
* file system partition uses the remainder up to end of the NAND
* increased size of the environment partition (to get an OneNAND compatible base address)
* shrink the U-Boot partition
Let's be compatible (e.g. Debian kernel built from upstream).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Johan Hovold [Wed, 22 Aug 2018 09:03:19 +0000 (11:03 +0200)]
clk: ti: fix OF child-node lookup
Fix child-node lookup which by using the wrong OF helper was searching
the whole tree depth-first, something which could end up matching an
unrelated node.
Also fix the related node-reference leaks.
Fixes: 8c220888a130 ("clk: ti: add support for clkctrl aliases") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Torvalds [Sun, 26 Aug 2018 20:39:05 +0000 (13:39 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer update from Thomas Gleixner:
"New defines for the compat time* types so they can be shared between
32bit and 64bit builds. Not used yet, but merging them now allows the
actual conversions to be merged through different maintainer trees
without dependencies
We still have compat interfaces for 32bit on 64bit even with the new
2038 safe timespec/val variants because pointer size is different. And
for the old style timespec/val interfaces we need yet another 'compat'
interface for both 32bit native and 32bit on 64bit"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
y2038: Provide aliases for compat helpers
Linus Torvalds [Sun, 26 Aug 2018 18:48:42 +0000 (11:48 -0700)]
Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
Linus Torvalds [Sun, 26 Aug 2018 18:41:08 +0000 (11:41 -0700)]
Merge tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc plugin fix from Kees Cook:
"Lift gcc test into Kconfig. This is for better behavior when the
kernel is built with Clang, reported by Stefan Agner"
* tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: Disable when building under Clang
Linus Torvalds [Sun, 26 Aug 2018 18:25:21 +0000 (11:25 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
"Kernel:
- Improve kallsyms coverage
- Add x86 entry trampolines to kcore
- Fix ARM SPE handling
- Correct PPC event post processing
Tools:
- Make the build system more robust
- Small fixes and enhancements all over the place
- Update kernel ABI header copies
- Preparatory work for converting libtraceevnt to a shared library
- License cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
tools arch x86: Update tools's copy of cpufeatures.h
perf python: Fix pyrf_evlist__read_on_cpu() interface
perf mmap: Store real cpu number in 'struct perf_mmap'
perf tools: Remove ext from struct kmod_path
perf tools: Add gzip_is_compressed function
perf tools: Add lzma_is_compressed function
perf tools: Add is_compressed callback to compressions array
perf tools: Move the temp file processing into decompress_kmodule
perf tools: Use compression id in decompress_kmodule()
perf tools: Store compression id into struct dso
perf tools: Add compression id into 'struct kmod_path'
perf tools: Make is_supported_compression() static
perf tools: Make decompress_to_file() function static
perf tools: Get rid of dso__needs_decompress() call in __open_dso()
perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble()
perf tools: Get rid of dso__needs_decompress() call in read_object_code()
tools lib traceevent: Change to SPDX License format
perf llvm: Allow passing options to llc in addition to clang
perf parser: Improve error message for PMU address filters
...
Linus Torvalds [Sun, 26 Aug 2018 17:13:21 +0000 (10:13 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Correct the L1TF fallout on 32bit and the off by one in the 'too much
RAM for protection' calculation.
- Add a helpful kernel message for the 'too much RAM' case
- Unbreak the VDSO in case that the compiler desides to use indirect
jumps/calls and emits retpolines which cannot be resolved because the
kernel uses its own thunks, which does not work for the VDSO. Make it
use the builtin thunks.
- Re-export start_thread() which was unexported when the 32/64bit
implementation was unified. start_thread() is required by modular
binfmt handlers.
- Trivial cleanups
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/l1tf: Suggest what to do on systems with too much RAM
x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM
x86/kvm/vmx: Remove duplicate l1d flush definitions
x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit
x86/process: Re-export start_thread()
x86/mce: Add notifier_block forward declaration
x86/vdso: Fix vDSO build if a retpoline is emitted
projects / kernel.git / log