Joanna Farley [Mon, 28 Mar 2022 15:40:59 +0000 (17:40 +0200)]
Merge changes from topics "ls1088a", "ls1088a-prepare" into integration
* changes:
docs(layerscape): add ls1088a soc and board support
feat(ls1088aqds): add ls1088aqds board support
feat(ls1088ardb): add ls1088ardb board support
feat(ls1088a): add new SoC platform ls1088a
build(changelog): add new scopes for ls1088a
feat(bl2): add support to separate no-loadable sections
refactor(layerscape): refine comparison of inerconnection
feat(layerscape): add soc helper macro definition for chassis 3
feat(nxp-gic): add some macros definition for gicv3
feat(layerscape): add CHASSIS 3 support for tbbr
feat(layerscape): define more chassis 3 hardware address
feat(nxp-crypto): add chassis 3 support
feat(nxp-dcfg): add Chassis 3 support
feat(lx2): enable DDR erratas for lx2 platforms
feat(layerscape): print DDR errata information
feat(nxp-ddr): add workaround for errata A050958
feat(layerscape): add new soc errata a010539 support
feat(layerscape): add new soc errata a009660 support
feat(nxp-ddr): add rawcard 1F support
fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically
fix(nxp-tools): fix create_pbl print log
build(changelog): add new scopes for NXP driver
Soby Mathew [Tue, 22 Mar 2022 16:21:19 +0000 (16:21 +0000)]
feat(rme): add dummy realm attestation key to RMMD
Add a dummy realm attestation key to RMMD, and return it on request.
The realm attestation key is requested with an SMC with the following
parameters:
* Fid (0xC400001B2).
* Attestation key buffer PA (the realm attestation key is copied
at this address by the monitor).
* Attestation key buffer length as input and size of realm
attesation key as output.
* Type of elliptic curve.
The variable is_fwu_initialized was initialized after
plat_fwu_set_images_source() is called.
But some functions called by plat_fwu_set_images_source() for STM32MP1
implementation expect is_fwu_initialized is set to true with asserts.
Rename is_fwu_initialized to is_metadata_initialized, and set it before
plat_fwu_set_images_source() is called.
Jiafei Pan [Fri, 18 Feb 2022 07:26:08 +0000 (15:26 +0800)]
feat(ls1088a): add new SoC platform ls1088a
LS1088A is a cost-effective, powerefficient, and highly integrated
SoC device featuring eight extremely power-efficient 64-bit ARM
Cortex-A53 cores with ECC-protected L1 and L2 cache memories for
high reliability, running up to 1.6 GHz.
Jiafei Pan [Thu, 24 Feb 2022 02:47:33 +0000 (10:47 +0800)]
feat(bl2): add support to separate no-loadable sections
Add new options SEPARATE_BL2_NOLOAD_REGION to separate no-loadable
sections (.bss, stack, page tables) to a ram region specified
by BL2_NOLOAD_START and BL2_NOLOAD_LIMIT.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I844ee0fc405474af0aff978d292c826fbe0a82fd
Biwen Li [Mon, 11 Jan 2021 03:11:44 +0000 (11:11 +0800)]
fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically
Fix build issue of mmap_add_ddr_region_dynamically():
ls_bl2_el3_setup.c:(.text.bl2_plat_preload_setup+0x28): undefined
reference to mmap_add_ddr_region_dynamically
Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Change-Id: I74a8b4c2337fc0646d6acb16ce61755c5efbdf38
Soby Mathew [Tue, 22 Mar 2022 16:19:39 +0000 (16:19 +0000)]
feat(rme): add dummy platform token to RMMD
Add a dummy platform token to RMMD and return it on request. The
platform token is requested with an SMC with the following parameters:
* Fid (0xC40001B3).
* Platform token PA (the platform token is copied at this address by
the monitor). The challenge object needs to be passed by
the caller in this buffer.
* Platform token len.
* Challenge object len.
When calling the SMC, the platform token buffer received by EL3 contains
the challenge object. It is not used on the FVP and is only printed to
the log.
Soby Mathew [Tue, 22 Mar 2022 13:58:52 +0000 (13:58 +0000)]
refactor(rme): reorg existing RMMD EL3 service FIDs
This patch reworks the GTSI service implementation in RMMD
such that it is made internal to RMMD. This rework also
lays the ground work for additional RMMD services which
can be invoked from RMM.
The rework renames some of the FID macros to make it
more suited for adding more RMMD services. All the RMM-EL31
service SMCs are now routed via rmmd_rmm_el3_handler().
Varun Wadekar [Wed, 9 Mar 2022 22:20:32 +0000 (22:20 +0000)]
fix(errata): workaround for Cortex A78 AE erratum 2395408
Cortex A78 AE erratum 2395408 is a Cat B erratum that applies
to revisions <= r0p1. It is still open.
This erratum states, "A translation table walk that matches an
existing L1 prefetch with a read request outstanding on CHI might
fold into the prefetch, which might lead to data corruption for
a future instruction fetch"
This erratum is avoided by setting CPUACTLR2_EL1[40] to 1 to
disable folding of demand requests into older prefetches with
L2 miss requests outstanding.
SDEN is available at https://developer.arm.com/documentation/SDEN-1707912
Varun Wadekar [Wed, 9 Mar 2022 22:04:00 +0000 (22:04 +0000)]
fix(errata): workaround for Cortex A78 AE erratum 2376748
Cortex A78 AE erratum 2376748 is a Cat B erratum that applies
to revisions <= r0p1. It is still open.
The erratum states, "A PE executing a PLDW or PRFM PST instruction
that lies on a mispredicted branch path might cause a second PE
executing a store exclusive to the same cache line address to fail
continuously."
The erratum is avoided by setting CPUACTLR2_EL1[0] to 1 to force
PLDW/PFRM ST to behave like PLD/PRFM LD and not cause invalidations
to other PE caches. There might be a small performance degradation
to this workaround for certain workloads that share data.
SDEN is available at https://developer.arm.com/documentation/SDEN-1707912
Manish Pandey [Tue, 22 Mar 2022 15:42:16 +0000 (16:42 +0100)]
Merge changes from topic "stm32mp13" into integration
* changes:
feat(stm32mp1): select platform compilation either by flag or DT
feat(stm32mp1-fdts): add support for STM32MP13 DK board
feat(stm32mp1-fdts): add DDR support for STM32MP13
feat(stm32mp1-fdts): add st-io_policies node for STM32MP13
feat(stm32mp1): updates for STM32MP13 device tree compilation
feat(stm32mp1-fdts): add DT files for STM32MP13
feat(dt-bindings): add TZC400 bindings for STM32MP13
feat(stm32mp1): add "Boot mode" management for STM32MP13
feat(stm32mp1): manage HSLV on STM32MP13
feat(stm32mp1): add sdmmc compatible in platform define
feat(st-sdmmc2): allow compatible to be defined in platform code
feat(stm32mp1): update IO compensation on STM32MP13
feat(stm32mp1): call pmic_voltages_init() in platform init
feat(st-pmic): add pmic_voltages_init() function
feat(stm32mp1): update CFG0 OTP for STM32MP13
feat(stm32mp1): usb descriptor update for STM32MP13
feat(st-clock): add clock driver for STM32MP13
feat(dt-bindings): add bindings for STM32MP13
feat(stm32mp1): get CPU info from SYSCFG on STM32MP13
feat(stm32mp1): use only one filter for TZC400 on STM32MP13
feat(stm32mp1): add a second fixed regulator
feat(stm32mp1): adaptations for STM32MP13 image header
feat(stm32mp1): update boot API for header v2.0
feat(stm32mp1): update IP addresses for STM32MP13
feat(stm32mp1): add part numbers for STM32MP13
feat(stm32mp1): chip rev. Z is 0x1001 on STM32MP13
feat(stm32mp1): update BACKUP_BOOT_MODE for STM32MP13
feat(stm32mp1): stm32mp_is_single_core() for STM32MP13
feat(stm32mp1): remove unsupported features on STM32MP13
feat(stm32mp1): update memory mapping for STM32MP13
feat(stm32mp1): introduce new flag for STM32MP13
feat(st): update stm32image tool for header v2
feat(stm32mp1): select platform compilation either by flag or DT
To choose either STM32MP13 or STM32MP15, one of the two flags can be
set to 1 in the make command line. Or the platform selection can be
done with device tree name, if it begins with stm32mp13 or stm32mp15.
Nicolas Le Bayon [Tue, 12 Jan 2021 17:18:27 +0000 (18:18 +0100)]
feat(stm32mp1-fdts): add DDR support for STM32MP13
Add dedicated device tree files for STM32MP13.
Add new DDR compatible for STM32MP13x.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Change-Id: Ib1bb9ad8cb2ab9f5f81549635d6604093aeb99d3
Yann Gautier [Tue, 25 Feb 2020 14:14:52 +0000 (15:14 +0100)]
feat(stm32mp1-fdts): add DT files for STM32MP13
STM32MP13 is a single Cortex-A7 CPU, without co-processor.
As for STM32MP15x SoC family, STM32MP15x SoCs come with different
features, depending on SoC version. Each peripheral node is created.
Some are left empty for the moment , and will be filled later on.
Yann Gautier [Tue, 12 Jan 2021 14:52:19 +0000 (15:52 +0100)]
feat(stm32mp1): manage HSLV on STM32MP13
On STM32MP13, the high speed mode for pads in low voltage is different
from STM32MP15. Each peripheral supporting the feature has its own
register.
Special care is taken for SDMMC peripherals. The HSLV mode is enabled
only if the max voltage for the pads is lower or equal to 1.8V.
Yann Gautier [Tue, 17 Nov 2020 14:27:58 +0000 (15:27 +0100)]
feat(stm32mp1): update IO compensation on STM32MP13
On STM32MP13, two new SD1 and SD2 IO compensations cells are added,
for SDMMC1 and SDMMC2. They have to be managed the same way as the
main compensation cell.
Yann Gautier [Tue, 18 Jan 2022 09:39:52 +0000 (10:39 +0100)]
feat(stm32mp1): call pmic_voltages_init() in platform init
The nominal voltage for VDDCPU when Cortex-A7 runs at 650MHz is 1.25V
on STM32MP13. VDDCORE should be set at 1.25V as well.
This is necessary, as the PMIC values in its NVMEM are 1.2V.
Yann Gautier [Tue, 18 Jan 2022 14:49:42 +0000 (15:49 +0100)]
feat(st-pmic): add pmic_voltages_init() function
This new function pmic_voltages_init() is used to set the minimum value
for STM32MP13 VDDCPU and VDDCORE regulators. This value is retrieved
from device tree.
Nicolas Le Bayon [Thu, 26 Nov 2020 08:57:09 +0000 (09:57 +0100)]
feat(stm32mp1): update CFG0 OTP for STM32MP13
This field is now declared on the 10 LSB bits on STM32MP13.
Several possible values are specified in the Reference Manual, and
indicate an open or closed device. Other values lead to a system panic.
Change-Id: I697124a21db66a56e7e223d601aa7cf44bb183c4 Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Yann Gautier [Thu, 10 Mar 2022 10:33:13 +0000 (11:33 +0100)]
feat(dt-bindings): add bindings for STM32MP13
Add dedicated clock and reset dt-bindings include files. The former
files are renamed with stm32mp15, and the stm32mp1 file just
determine through STM32MP13 or STM32MP15 flag which file to include.
feat(stm32mp1): adaptations for STM32MP13 image header
The header must now include by default at least an extra padding
header, increasing the size of the header to 512 bytes (0x200).
This header will be placed at the end of SRAM3 by BootROM, letting
the whole SYSRAM to TF-A.
The boot context is now placed in SRAM2, hence this memory has to be
mapped in BL2 MMU. This mapping is done for all SRAMs in a 2MB area.
Yann Gautier [Wed, 12 Feb 2020 14:38:34 +0000 (15:38 +0100)]
feat(stm32mp1): add part numbers for STM32MP13
Add the new part numbers and adapt the functions that use them.
There is no package number in OTP as they all share the same GPIO
banks.
This part is then stubbed for STM32MP13.
Yann Gautier [Wed, 12 Feb 2020 08:36:23 +0000 (09:36 +0100)]
feat(stm32mp1): remove unsupported features on STM32MP13
* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.
Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7 Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
STM32MP13 is a variant of STM32MP1, with a single Cortex-A7, and no
Cortex-M4.
There is only one DDR port.
SP_min is not supported, only OP-TEE can be used as monitor.
STM32MP13 uses the header v2.0 format for stm32image generation
for BL2.
Nicolas Le Bayon [Mon, 18 Nov 2019 16:13:42 +0000 (17:13 +0100)]
feat(st): update stm32image tool for header v2
The stm32image tool is updated to manage new header v2.0 for BL2
images.
Add new structure for the header v2.0 management.
Adapt to keep compatibility with v1.0.
Add the header version major and minor in the command line
when executing the tool, as well as binary type (0x10 for BL2).
Bipin Ravi [Thu, 24 Feb 2022 05:45:50 +0000 (23:45 -0600)]
fix(security): apply SMCCC_ARCH_WORKAROUND_3 to A73/A75/A72/A57
This patch applies CVE-2022-23960 workarounds for Cortex-A75,
Cortex-A73, Cortex-A72 & Cortex-A57. This patch also implements
the new SMCCC_ARCH_WORKAROUND_3 and enables necessary discovery
hooks for Coxtex-A72, Cortex-A57, Cortex-A73 and Cortex-A75 to
enable discovery of this SMC via SMC_FEATURES. SMCCC_ARCH_WORKAROUND_3
is implemented for A57/A72 because some revisions are affected by both
CVE-2022-23960 and CVE-2017-5715 and this allows callers to replace
SMCCC_ARCH_WORKAROUND_1 calls with SMCCC_ARCH_WORKAROUND_3. For details
of SMCCC_ARCH_WORKAROUND_3, please refer SMCCCv1.4 specification.
Signed-off-by: Bipin Ravi <bipin.ravi@arm.com> Signed-off-by: John Powell <john.powell@arm.com>
Change-Id: Ifa6d9c7baa6764924638efe3c70468f98d60ed7c
In anticipation of Spectre BHB workaround mitigation patches, we
disable the RECLAIM_INIT_CODE for FVP platform. Since the spectre
BHB mitigation workarounds inevitably increase the size of the various
segments due to additional instructions and/or macros, these segments
cannot be fit in the existing memory layout designated for BL31 image.
The issue is specifically seen in complex build configs for FVP
platform. One such config has TBB with Dual CoT and test secure
payload dispatcher(TSPD) enabled. Even a small increase in individual
segment size in order of few bytes might lead to build fails due to
alignment requirements(PAGE_ALIGN to 4KB).
This is needed to workaround the following build failures observed
across multiple build configs:
aarch64-none-elf-ld.bfd: BL31 init has exceeded progbits limit.
aarch64-none-elf-ld.bfd: /work/workspace/workspace/tf-worker_ws_2/trusted_firmware/build/fvp/debug/bl31/bl31.elf section coherent_ram will not fit in region RAM
aarch64-none-elf-ld.bfd: BL31 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region RAM overflowed by 4096 bytes
Pali Rohár [Wed, 16 Mar 2022 11:38:43 +0000 (12:38 +0100)]
docs(a3k): update documentation about DEBUG mode for UART
DEBUG mode can be enabled without any issue for Armada 37xx and also for
other A7K/A8K/CN913x. There is no incompatibility with Xmodem protocol
like it was written before, because Armada 37xx UART images do not print
anything on UART during image transfer and A7K/A8K/CN913x BLE image
automatically turn off debugging output when booting over UART. Looks
like this incorrect information is some relict from the past.
anans [Tue, 15 Mar 2022 08:07:37 +0000 (13:37 +0530)]
fix(ufs): move nutrs assignment to ufs_init
nutrs is set in ufs_enum (used by get_empty_slot), this will not
be assigned if UFS_FLAGS_SKIPINIT is set in flags during init and
might end up crashing read/write commands
Merge changes from topic "revert-14286-uart_segregation-VURJFOWMTM" into integration
* changes:
Revert "feat(sgi): deviate from arm css common uart related defi..."
Revert "feat(sgi): route TF-A logs via secure uart"
Revert "feat(sgi): add page table translation entry for secure uart"
Revert "feat(sgi): deviate from arm css common uart related defi..."
Revert submission 14286-uart_segregation
Reason for revert: Need to wait for companion patches in CI and UEFI/Linux to be upstreamed.
Reverted Changes:
I8574b31d5:feat(sgi): add page table translation entry for se...
I8896ae05e:feat(sgi): route TF-A logs via secure uart
I39170848e:feat(sgi): deviate from arm css common uart relate...
Revert "feat(sgi): route TF-A logs via secure uart"
Revert submission 14286-uart_segregation
Reason for revert: Need to wait for companion patches in CI and UEFI/Linux to be upstreamed.
Reverted Changes:
I8574b31d5:feat(sgi): add page table translation entry for se...
I8896ae05e:feat(sgi): route TF-A logs via secure uart
I39170848e:feat(sgi): deviate from arm css common uart relate...
Revert "feat(sgi): add page table translation entry for secure uart"
Revert submission 14286-uart_segregation
Reason for revert: Need to wait for companion patches in CI and UEFI/Linux to be upstreamed.
Reverted Changes:
I8574b31d5:feat(sgi): add page table translation entry for se...
I8896ae05e:feat(sgi): route TF-A logs via secure uart
I39170848e:feat(sgi): deviate from arm css common uart relate...
Rex-BC Chen [Thu, 2 Dec 2021 06:03:44 +0000 (14:03 +0800)]
feat(mt8186): add DFD control in SiP service
DFD (Design for Debug) is a debugging tool, which scans flip-flops and
dumps to internal RAM on the WDT reset. After system reboots, those
values could be showed for debugging.
projects / arm-tf.git / log