In preparation for reducing the use of ksize(), record the actual
allocation size for later memcpy(). This avoids copying extra
(uninitialized!) bytes into the patch buffer when the requested
allocation size isn't exactly the size of a kmalloc bucket.
Additionally, fix potential future issues where runtime bounds checking
will notice that the buffer was allocated to a smaller value than
returned by ksize().
Fixes: 4487451a80f5 ("x86, microcode, amd: Early microcode patch loading support for AMD") Suggested-by: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
Should check of_iomap return value 'fep->fec.fecp' instead of 'fep->fcc.fccp'
Fixes: 04e0d0e98e18 ("fs_enet: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.
Fixes: 2dc492d81bf7 ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When trying to finish resolving a struct member, btf_struct_resolve
saves the member type id in a u16 temporary variable. This truncates
the 32 bit type id value if it exceeds UINT16_MAX.
As a result, structs that have members with type ids > UINT16_MAX and
which need resolution will fail with a message like this:
rtl8xxxu_queue_select() selects the wrong TX queues because it's
reading memory from the wrong address. It expects to find ieee80211_hdr
at skb->data, but that's not the case after skb_push(). Move the call
to rtl8xxxu_queue_select() before the call to skb_push().
There some bounds checking to ensure that "map_addr" is not out of
bounds before the start of the loop. But the checking needs to be
done as we iterate through the loop because "map_addr" gets larger as
we iterate.
Fixes: 630609394850 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Yv8eGLdBslLAk3Ct@kili Signed-off-by: Sasha Levin <sashal@kernel.org>
The current pseudo_lock.c code overwrites the value of the
MSR_MISC_FEATURE_CONTROL to 0 even if the original value is not 0.
Therefore, modify it to save and restore the original values.
When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.
From 'IEEE Std 802.11-2020 section 11.8.8.4.1':
The mesh channel switch may be triggered by the need to avoid
interference to a detected radar signal, or to reassign mesh STA
channels to ensure the MBSS connectivity.
A 20/40 MHz MBSS may be changed to a 20 MHz MBSS and a 20 MHz
MBSS may be changed to a 20/40 MHz MBSS.
Since the standard allows the change of bandwidth during
the channel switch in mesh, remove the bandwidth check present in
ieee80211_set_csa_beacon.
Fixes: fa56afac5b63 ("{nl,cfg,mac}80211: enable the triggering of CSA frame in mesh") Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com> Link: https://lore.kernel.org/r/1658903549-21218-1-git-send-email-quic_haric@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When peer delete failed in a disconnect operation, use-after-free
detected by KFENCE in below log. It is because for each vdev_id and
address, it has only one struct ath10k_peer, it is allocated in
ath10k_peer_map_event(). When connected to an AP, it has more than
one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the
array peer_map of struct ath10k will be set muti-elements to the
same ath10k_peer in ath10k_peer_map_event(). When peer delete failed
in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer
id in array peer_map of struct ath10k, and then use-after-free happened
for the 2nd peer id because they map to the same ath10k_peer.
And clean up all peers in array peer_map for the ath10k_peer, then
user-after-free disappeared
peer map event log:
[ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e
[ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33
[ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166
peer unmap event log:
[ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING)
[ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone)
[ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246
[ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198
[ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166
use-after-free log:
[21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING)
[21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110
[21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed
[21713.799968] ==================================================================
[21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.799991]
[21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69):
[21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core]
[21713.800041] drv_sta_state+0x115/0x677 [mac80211]
[21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800161] genl_rcv_msg+0x38e/0x3be
[21713.800166] netlink_rcv_skb+0x89/0xf7
[21713.800171] genl_rcv+0x28/0x36
[21713.800176] netlink_unicast+0x179/0x24b
[21713.800181] netlink_sendmsg+0x3a0/0x40e
[21713.800187] sock_sendmsg+0x72/0x76
[21713.800192] ____sys_sendmsg+0x16d/0x1e3
[21713.800196] ___sys_sendmsg+0x95/0xd1
[21713.800200] __sys_sendmsg+0x85/0xbf
[21713.800205] do_syscall_64+0x43/0x55
[21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[21713.800213]
[21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k
[21713.800219]
[21713.800224] allocated by task 13 on cpu 0 at 21705.501373s:
[21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]
[21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core]
[21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core]
[21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core]
[21713.800283] ath10k_pci_process_rx_cb+0x195/0x1df [ath10k_pci]
[21713.800294] ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core]
[21713.800305] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core]
[21713.800310] ath10k_pci_napi_poll+0x49/0x144 [ath10k_pci]
[21713.800316] net_rx_action+0xdc/0x361
[21713.800320] __do_softirq+0x163/0x29a
[21713.800325] asm_call_irq_on_stack+0x12/0x20
[21713.800331] do_softirq_own_stack+0x3c/0x48
[21713.800337] __irq_exit_rcu+0x9b/0x9d
[21713.800342] common_interrupt+0xc9/0x14d
[21713.800346] asm_common_interrupt+0x1e/0x40
[21713.800351] ksoftirqd_should_run+0x5/0x16
[21713.800357] smpboot_thread_fn+0x148/0x211
[21713.800362] kthread+0x150/0x15f
[21713.800367] ret_from_fork+0x22/0x30
[21713.800370]
[21713.800374] freed by task 708 on cpu 1 at 21713.799953s:
[21713.800498] ath10k_sta_state+0x2c6/0xb8a [ath10k_core]
[21713.800515] drv_sta_state+0x115/0x677 [mac80211]
[21713.800532] __sta_info_destroy_part2+0xb1/0x133 [mac80211]
[21713.800548] __sta_info_flush+0x11d/0x162 [mac80211]
[21713.800565] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211]
[21713.800581] ieee80211_mgd_deauth+0x26c/0x29b [mac80211]
[21713.800598] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]
[21713.800614] nl80211_deauthenticate+0xf8/0x121 [cfg80211]
[21713.800619] genl_rcv_msg+0x38e/0x3be
[21713.800623] netlink_rcv_skb+0x89/0xf7
[21713.800628] genl_rcv+0x28/0x36
[21713.800632] netlink_unicast+0x179/0x24b
[21713.800637] netlink_sendmsg+0x3a0/0x40e
[21713.800642] sock_sendmsg+0x72/0x76
[21713.800646] ____sys_sendmsg+0x16d/0x1e3
[21713.800651] ___sys_sendmsg+0x95/0xd1
[21713.800655] __sys_sendmsg+0x85/0xbf
[21713.800659] do_syscall_64+0x43/0x55
[21713.800663] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 0c22b9333a40 ("ath10k: Clean up peer when sta goes away.") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220801141930.16794-1-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If this memdup_user() call fails, the memory allocated in a previous call
a few lines above should be freed. Otherwise it leaks.
Fixes: f50edfb1b698 ("nfsd: add support for upcall version 2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MT_MEMORY_RO is introduced by commit dfe4cb6c3e20 ("ARM: 9210/1:
Mark the FDT_FIXED sections as shareable"), which is a readonly
memory type for FDT area, but there are some different between
ARM_LPAE and non-ARM_LPAE, we need to setup PMD_SECT_AP2 and
L_PMD_SECT_RDONLY for MT_MEMORY_RO when ARM_LAPE enabled.
Fixes: dfe4cb6c3e20 ("ARM: 9210/1: Mark the FDT_FIXED sections as shareable") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
As done for other sections, define the extern as a character array,
which relaxes many of the compiler-time object size checks, which would
otherwise assume it's a single long. Solves the following build error:
arch/sh/kernel/machvec.c: error: array subscript 'struct sh_machine_vector[0]' is partly outside array bounds of 'long int[1]' [-Werror=array-bounds]: => 105:33
Since userfaultfd doesn't implement a write operation, it is more
appropriate to open it read-only.
When userfaultfds are opened read-write like it is now, and such fd is
passed from one process to another, SELinux will check both read and
write permissions for the target process, even though it can't actually
do any write operation on the fd later.
Inspired by the following bug report, which has hit the SELinux scenario
described above:
https://bugzilla.redhat.com/show_bug.cgi?id=1974559
Reported-by: Robert O'Callahan <roc@ocallahan.org> Fixes: 5df97d311d21 ("userfaultfd: add new syscall to provide memory externalization") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was found that some tracing functions in kernel/trace/trace.c acquire
an arch_spinlock_t with preemption and irqs enabled. An example is the
tracing_saved_cmdlines_size_read() function which intermittently causes
a "BUG: using smp_processor_id() in preemptible" warning when the LTP
read_all_proc test is run.
That can be problematic in case preemption happens after acquiring the
lock. Add the necessary preemption or interrupt disabling code in the
appropriate places before acquiring an arch_spinlock_t.
The convention here is to disable preemption for trace_cmdline_lock and
interupt for max_lock.
Link: https://lkml.kernel.org/r/20220922145622.1744826-1-longman@redhat.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: stable@vger.kernel.org Fixes: 91fd73cac46f ("tracing: Add conditional snapshot") Fixes: 8ce1567b63ba ("tracing: Introduce saved_cmdlines_size file") Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latest version of grep claims that egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this by using "grep -E" instead.
Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Paris <eparis@parisplace.org> Cc: selinux@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[PM: tweak to remove vdso reference, cleanup subj line] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and
free the memory.Thus, when nouveau_bo_init() returns an error, the gem
object has already been released. Then the call to nouveau_bo_ref() will
use the freed "nvbo->bo" and lead to a use-after-free bug.
We should delete the call to nouveau_bo_ref() to avoid the use-after-free.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 26ea454bbfed ("drm/nouveau: Initialize GEM object before TTM object") Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/20220705132546.2247677-1-niejianglei2021@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool. There are 2 significant changes to the .gcda file format that
need to be supported:
Deliberately truncate the exception error code when shoving it into the
VMCS (VM-Entry field for vmcs01 and vmcs02, VM-Exit field for vmcs12).
Intel CPUs are incapable of handling 32-bit error codes and will never
generate an error code with bits 31:16, but userspace can provide an
arbitrary error code via KVM_SET_VCPU_EVENTS. Failure to drop the bits
on exception injection results in failed VM-Entry, as VMX disallows
setting bits 31:16. Setting the bits on VM-Exit would at best confuse
L1, and at worse induce a nested VM-Entry failure, e.g. if L1 decided to
reinject the exception back into L2.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20220830231614.3580124-3-seanjc@google.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop pending exceptions and events queued for re-injection when leaving
nested guest mode, even if the "exit" is due to VM-Fail, SMI, or forced
by host userspace. Failure to purge events could result in an event
belonging to L2 being injected into L1.
This _should_ never happen for VM-Fail as all events should be blocked by
nested_run_pending, but it's possible if KVM, not the L1 hypervisor, is
the source of VM-Fail when running vmcs02.
SMI is a nop (barring unknown bugs) as recognition of SMI and thus entry
to SMM is blocked by pending exceptions and re-injected events.
Forced exit is definitely buggy, but has likely gone unnoticed because
userspace probably follows the forced exit with KVM_SET_VCPU_EVENTS (or
some other ioctl() that purges the queue).
Fixes: 71b7cd8e8004 ("kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20220830231614.3580124-2-seanjc@google.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The emulator checks the wrong variable while setting the CPU
interruptibility state, the target segment is embedded in the instruction
opcode, not the ModR/M register. Fix the condition.
Signed-off-by: Michal Luczaj <mhal@rbox.co> Fixes: 46f2db219cd3 ("KVM: emulate: POP SS triggers a MOV SS shadow too") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20220821215900.1419215-1-mhal@rbox.co Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cedrus_hw_resume() crashes with NULL deference on driver probe if
runtime PM is disabled because it uses platform data that hasn't been
set up yet. Fix this by setting the platform data earlier during probe.
Cc: stable@vger.kernel.org Fixes: 940eb4656803 (media: platform: Add Cedrus VPU decoder driver) Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ring buffer is broken up into sub buffers (currently of page size).
Each sub buffer has a pointer to its "tail" (the last event written to the
sub buffer). When a new event is requested, the tail is locally
incremented to cover the size of the new event. This is done in a way that
there is no need for locking.
If the tail goes past the end of the sub buffer, the process of moving to
the next sub buffer takes place. After setting the current sub buffer to
the next one, the previous one that had the tail go passed the end of the
sub buffer needs to be reset back to the original tail location (before
the new event was requested) and the rest of the sub buffer needs to be
"padded".
The race happens when a reader takes control of the sub buffer. As readers
do a "swap" of sub buffers from the ring buffer to get exclusive access to
the sub buffer, it replaces the "head" sub buffer with an empty sub buffer
that goes back into the writable portion of the ring buffer. This swap can
happen as soon as the writer moves to the next sub buffer and before it
updates the last sub buffer with padding.
Because the sub buffer can be released to the reader while the writer is
still updating the padding, it is possible for the reader to see the event
that goes past the end of the sub buffer. This can cause obvious issues.
To fix this, add a few memory barriers so that the reader definitely sees
the updates to the sub buffer, and also waits until the writer has put
back the "tail" of the sub buffer back to the last event that was written
on it.
To be paranoid, it will only spin for 1 second, otherwise it will
warn and shutdown the ring buffer code. 1 second should be enough as
the writer does have preemption disabled. If the writer doesn't move
within 1 second (with preemption disabled) something is horribly
wrong. No interrupt should last 1 second!
The wake up waiters only checks the "wakeup_full" variable and not the
"full_waiters_pending". The full_waiters_pending is set when a waiter is
added to the wait queue. The wakeup_full is only set when an event is
triggered, and it clears the full_waiters_pending to avoid multiple calls
to irq_work_queue().
The irq_work callback really needs to check both wakeup_full as well as
full_waiters_pending such that this code can be used to wake up waiters
when a file is closed that represents the ring buffer and the waiters need
to be woken up.
Link: https://lkml.kernel.org/r/20220927231824.209460321@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: c5e03c1a41c6e ("tracing/ring-buffer: Move poll wake ups into ring buffer code") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic to know when the shortest waiters on the ring buffer should be
woken up or not has uses a less than instead of a greater than compare,
which causes the shortest_full to actually be the longest.
Link: https://lkml.kernel.org/r/20220927231823.718039222@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 57a63d9503ffb ("ring-buffer: Add percentage of ring buffer full to wake up reader") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a page is partially read, and then the splice system call is run
against the ring buffer, it will always fail to read, no matter how much
is in the ring buffer. That's because the code path for a partial read of
the page does will fail if the "full" flag is set.
The splice system call wants full pages, so if the read of the ring buffer
is not yet full, it should return zero, and the splice will block. But if
a previous read was done, where the beginning has been consumed, it should
still be given to the splice caller if the rest of the page has been
written to.
This caused the splice command to never consume data in this scenario, and
let the ring buffer just fill up and lose events.
When executing following commands like what document said, but the log
"#### all functions enabled ####" was not shown as expect:
1. Set a 'mod' filter:
$ echo 'write*:mod:ext3' > /sys/kernel/tracing/set_ftrace_filter
2. Invert above filter:
$ echo '!write*:mod:ext3' >> /sys/kernel/tracing/set_ftrace_filter
3. Read the file:
$ cat /sys/kernel/tracing/set_ftrace_filter
By some debugging, I found that flag FTRACE_HASH_FL_MOD was not unset
after inversion like above step 2 and then result of ftrace_hash_empty()
is incorrect.
Link: https://lkml.kernel.org/r/20220926152008.2239274-1-zhengyejian1@huawei.com Cc: <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 3ee854b94a4f ("ftrace: Have cached module filters be an active filter") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KLP transition code depends on the TIF_PATCH_PENDING and
the task->patch_state to stay in sync. On a normal (forward)
transition, TIF_PATCH_PENDING will be set on every task in
the system, while on a reverse transition (after a failed
forward one) first TIF_PATCH_PENDING will be cleared from
every task, followed by it being set on tasks that need to
be transitioned back to the original code.
However, the fork code copies over the TIF_PATCH_PENDING flag
from the parent to the child early on, in dup_task_struct and
setup_thread_stack. Much later, klp_copy_process will set
child->patch_state to match that of the parent.
However, the parent's patch_state may have been changed by KLP loading
or unloading since it was initially copied over into the child.
This results in the KLP code occasionally hitting this warning in
klp_complete_transition:
Set, or clear, the TIF_PATCH_PENDING flag in the child task
depending on whether or not it is needed at the time
klp_copy_process is called, at a point in copy_process where the
tasklist_lock is held exclusively, preventing races with the KLP
code.
The KLP code does have a few places where the state is changed
without the tasklist_lock held, but those should not cause
problems because klp_update_patch_state(current) cannot be
called while the current task is in the middle of fork,
klp_check_and_switch_task() which is called under the pi_lock,
which prevents rescheduling, and manipulation of the patch
state of idle tasks, which do not fork.
This should prevent this warning from triggering again in the
future, and close the race for both normal and reverse transitions.
Signed-off-by: Rik van Riel <riel@surriel.com> Reported-by: Breno Leitao <leitao@debian.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Fixes: 921d2632ba0f ("livepatch: change to a per-task consistency model") Cc: stable@kernel.org Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220808150019.03d6a67b@imladris.surriel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In our product environment, we encounter some jbd hung waiting handles to
stop while several writters were doing memory reclaim for buffer head
allocation in delay alloc write path. Ext4 do buffer head allocation with
holding transaction handle which may be blocked too long if the reclaim
works not so smooth. According to our bcc trace, the reclaim time in
buffer head allocation can reach 258s and the jbd transaction commit also
take almost the same time meanwhile. Except for these extreme cases,
we often see several seconds delays for cgroup memory reclaim on our
servers. This is more likely to happen considering docker environment.
One thing to note, the allocation of buffer heads is as often as page
allocation or more often when blocksize less than page size. Just like
page cache allocation, we should also place the buffer head allocation
before startting the handle.
ext4_lazyinit_thread is not set freezable. Hence when the thread calls
try_to_freeze it doesn't freeze during suspend and continues to send
requests to the storage during suspend, resulting in suspend failures.
When inode is created and written to using direct IO, there is nothing
to clear the EXT4_STATE_MAY_INLINE_DATA flag. Thus when inode gets
truncated later to say 1 byte and written using normal write, we will
try to store the data as inline data. This confuses the code later
because the inode now has both normal block and inline data allocated
and the confusion manifests for example as:
If the beginning of the inode bitmap area is corrupted on disk, an inode
with the same inode number as the root inode can be allocated and fail
soon after. In this case, the subsequent call to nilfs_clear_inode() on
that bogus root inode will wrongly decrement the reference counter of
struct nilfs_root, and this will erroneously free struct nilfs_root,
causing kernel oopses.
This fixes the problem by changing nilfs_new_inode() to skip reserved
inode numbers while repairing the inode bitmap.
BUG: KASAN: use-after-free in recover_data+0x63ae/0x6ae0 [f2fs]
Read of size 4 at addr ffff8881464dcd80 by task mount/1013
CPU: 3 PID: 1013 Comm: mount Tainted: G W 6.0.0-rc4 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x5e
print_report.cold+0xf3/0x68d
kasan_report+0xa8/0x130
recover_data+0x63ae/0x6ae0 [f2fs]
f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs]
f2fs_fill_super+0x4665/0x61e0 [f2fs]
mount_bdev+0x2cf/0x3b0
legacy_get_tree+0xed/0x1d0
vfs_get_tree+0x81/0x2b0
path_mount+0x47e/0x19d0
do_mount+0xce/0xf0
__x64_sys_mount+0x12c/0x1a0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is: in fuzzed image, SSA table is corrupted: ofs_in_node
is larger than ADDRS_PER_PAGE(), result in out-of-range access on 4k-size
page.
If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic
instead of warning.
The root cause is: in fuzzed image, SIT table is inconsistent with inode
mapping table, result in triggering such warning during SIT table update.
This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this
flag, data block recovery flow can check destination blkaddr's validation
in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.
Cc: stable@vger.kernel.org Reported-by: Wenqing Liu <wenqingliu0120@gmail.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/ CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uImage boot wrapper should not use SPE instructions, like kernel itself.
Boot wrapper has already disabled Altivec and VSX instructions but not SPE.
Options -mno-spe and -mspe=no already set when compilation of kernel, but
not when compiling uImage wrapper yet. Fix it.
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.
lld since llvm:6611d58f5bbc ("[ELF] Relax R_RISCV_ALIGN"), which will be
included in the 15.0.0 release, has implemented some RISC-V linker
relaxation. -mno-relax is no longer needed in
KBUILD_CFLAGS/KBUILD_AFLAGS to suppress R_RISCV_ALIGN which older lld
can not handle:
ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN
requires unimplemented linker relaxation; recompile with -mno-relax
but the .o is already compiled with -mno-relax
Commit 38557cabadf3 ("riscv: mmap with PROT_WRITE but no PROT_READ is
invalid") made mmap() return EINVAL if PROT_WRITE was set wihtout
PROT_READ with the justification that a write-only PTE is considered a
reserved PTE permission bit pattern in the privileged spec. This check
is unnecessary since we let VM_WRITE imply VM_READ on RISC-V, and it is
inconsistent with other architectures that don't support write-only PTEs,
creating a potential software portability issue. Just remove the check
altogether and let PROT_WRITE imply PROT_READ as is the case on other
architectures.
Note that this also allows PROT_WRITE|PROT_EXEC mappings which were
disallowed prior to the aforementioned commit; PROT_READ is implied in
such mappings as well.
Fixes: 38557cabadf3 ("riscv: mmap with PROT_WRITE but no PROT_READ is invalid") Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220915193702.2201018-3-abrestic@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Independend of the current graphics resolution, adjust the reported
graphics card memory size to the next 4MB boundary.
This fixes the fbtest program which expects a naturally aligned size.
Fix port I/O string accessors such as `insb', `outsb', etc. which use
the physical PCI port I/O address rather than the corresponding memory
mapping to get at the requested location, which in turn breaks at least
accesses made by our parport driver to a PCIe parallel port such as:
PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20
parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
For simplicity address the problem by adding PCI_IOBASE to the physical
address requested in the respective wrapper macros only, observing that
the raw accessors such as `__insb', `__outsb', etc. are not supposed to
be used other than by said macros. Remove the cast to `long' that is no
longer needed on `addr' now that it is used as an offset from PCI_IOBASE
and add parentheses around `addr' needed for predictable evaluation in
macro expansion. No need to make said adjustments in separate changes
given that current code is gravely broken and does not ever work.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: fc7c284523a3f ("RISC-V: Atomic and Locking Code") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209220223080.29493@angie.orcam.me.uk Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On recent kernels, the PM8058 L16 (or any other PM8058 LDO-regulator)
does not come up if they are supplied by an SMPS-regulator. This
is not very strange since the regulators are registered in a long
array and the L-regulators are registered before the S-regulators,
and if an L-regulator defers, it will never get around to registering
the S-regulator that it needs.
See arch/arm/boot/dts/qcom-apq8060-dragonboard.dts:
Fix this by moving the PM8058 S-regulators first in the array.
Do the same for the PM8901 S-regulators (though this is currently
not causing any problems with out device trees) so that the pattern
of registration order is the same on all PMnnnn chips.
Fixes: 43ba459e2059 ("regulator: qcom: Rework to single platform device") Cc: stable@vger.kernel.org Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220909112529.239143-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slimbus streams are first prepared and then enabled, so the cleanup path
should reverse it. The unprepare sets stream->num_ports to 0 and frees
the stream->ports. Calling disable after unprepare was not really
effective (channels was not deactivated) and could lead to further
issues due to making transfers on unprepared stream.
Fixes: 8b27f352f489 ("ASoC: wcd9335: add support to wcd9335 codec") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220921145354.1683791-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Step 3. drop cache (buffer head for block 6 is released)
Step 4. chown bin f_b -> dquot_acquire -> commit_dqblk -> v2_write_dquot:
qtree_write_dquot
do_insert_tree
find_free_dqentry
get_free_dqblk
dh = (struct qt_disk_dqdbheader *)buf
blk = info->dqi_free_blk // 6
ret = read_blk(info, blk, buf) // The content of buf is random
info->dqi_free_blk = le32_to_cpu(dh->dqdh_next_free) // random blk
Step 5. chown bin f_c -> notify_change -> ext4_setattr -> dquot_transfer:
dquot = dqget -> acquire_dquot -> ext4_acquire_dquot -> dquot_acquire ->
commit_dqblk -> v2_write_dquot -> dq_insert_tree:
do_insert_tree
find_free_dqentry
get_free_dqblk
blk = info->dqi_free_blk // If blk < 0 and blk is not an error
code, it will be returned as dquot
transfer_to[USRQUOTA] = dquot // A random negative value
__dquot_transfer(transfer_to)
dquot_add_inodes(transfer_to[cnt])
spin_lock(&dquot->dq_dqb_lock) // page fault
, which will lead to kernel page fault:
Quota error (device sda): qtree_write_dquot: Error -8000 occurred
while creating quota
BUG: unable to handle page fault for address: ffffffffffffe120
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 5974 Comm: chown Not tainted 6.0.0-rc1-00004
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:_raw_spin_lock+0x3a/0x90
Call Trace:
dquot_add_inodes+0x28/0x270
__dquot_transfer+0x377/0x840
dquot_transfer+0xde/0x540
ext4_setattr+0x405/0x14d0
notify_change+0x68e/0x9f0
chown_common+0x300/0x430
__x64_sys_fchownat+0x29/0x40
In order to avoid accessing invalid quota memory address, this patch adds
block number checking of next/prev free block read from quota file.
During lock arg validation, first check for -EBUSY cases, then for
-EINVAL cases. The -EINVAL checks look at lkb state variables
which are not stable when an lkb is busy and would cause an
-EBUSY result, e.g. lkb->lkb_grmode.
Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a race by using ls_cb_mutex around the bit
operations and conditional code blocks for LSFL_CB_DELAY.
The function dlm_callback_stop() expects to stop all callbacks and
flush all currently queued onces. The set_bit() is not enough because
there can still be queue_work() after the workqueue was flushed.
To avoid queue_work() after set_bit(), surround both by ls_cb_mutex.
Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Spreadtrum controller supports 100KHz minimal clock rate, which means
that the current value 400KHz is wrong.
Unfortunately this has also lead to fail to initialize some cards, which
are allowed to require 100KHz to work. So, let's fix the problem by
changing the minimal supported clock rate to 100KHz.
The TX queue seems to be implicitly flushed by the hardware during
bus-off or bus-off recovery, but the driver does not reset the TX
bookkeeping.
Despite not resetting TX bookkeeping the driver still re-enables TX
queue unconditionally, leading to "cannot find free context" /
NETDEV_TX_BUSY errors if the TX queue was full at bus-off time.
Fix that by resetting TX bookkeeping on CAN restart.
Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778.
Cc: stable@vger.kernel.org Fixes: d001c8c6a4d1 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For command events read from the device,
kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not
exceed the size of the received data, but the actual kvaser_cmd handlers
will happily read any kvaser_cmd fields without checking for cmd->len.
This can cause an overread if the last cmd in the buffer is shorter than
expected for the command type (with cmd->len showing the actual short
size).
Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of
which are delivered to userspace as-is.
Fix that by verifying the length of command before handling it.
This issue can only occur after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org Fixes: d001c8c6a4d1 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and
completed when the device sends CMD_FLUSH_QUEUE_RESP.
This causes completion of uninitialized completion if the device sends
CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a
response to a flush by a previously bound driver, or a misbehaving
device).
Fix that by initializing flush_comp in kvaser_usb_init_one() like the
other completions.
This issue is only triggerable after RX URBs have been set up, i.e. the
interface has been opened at least once.
Cc: stable@vger.kernel.org Fixes: a55fe6fb9371 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream
These hubs suffer from two separate problems:
1) After the host system was suspended and woken up, the hubs appear to
be in a random state. Some downstream ports (both internal to the
built-in audio and network controllers, and external to USB sockets)
may no longer be functional. The exact list of disabled ports (if
any) changes from wakeup to wakeup. Ports remain in that state until
the dock is power-cycled, or until the laptop is rebooted.
Wakeup sources connected to the hubs (keyboard, WoL on the integrated
gigabit controller) will wake the system up from suspend, but they
may no longer work after wakeup (and in that case will no longer work
as wakeup source in a subsequent suspend-wakeup cycle).
This issue appears in the logs with messages such as:
usb 1-6.1-port4: cannot disable (err = -71)
usb 1-6-port2: cannot disable (err = -71)
usb 1-6.1: clear tt 1 (80c0) error -71
usb 1-6-port4: cannot disable (err = -71)
usb 1-6.4: PM: dpm_run_callback(): usb_dev_resume+0x0/0x10 [usbcore] returns -71
usb 1-6.4: PM: failed to resume async: error -71
usb 1-7: reset full-speed USB device number 5 using xhci_hcd
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1-port1: cannot disable (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: cannot reset (err = -71)
usb 1-6.1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1-port1: cannot disable (err = -71)
2) Some USB devices cannot be enumerated properly. So far I have only
seen the issue with USB 3.0 devices. The same devices work without
problem directly connected to the host system, to other systems or to
other hubs (even when those hubs are connected to the OneLink+ dock).
One very reliable reproducer is this USB 3.0 HDD enclosure:
152d:9561 JMicron Technology Corp. / JMicron USA Technology Corp. Mobius
I have seen it happen sporadically with other USB 3.0 enclosures,
with controllers from different manufacturers, all self-powered.
Typical messages in the logs:
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 6, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 7, error -62
usb 2-1-port4: attempt power cycle
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 8, error -62
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 2-1.4: device not accepting address 9, error -62
usb 2-1-port4: unable to enumerate USB device
Through trial and error, I found that the USB_QUIRK_RESET_RESUME solved
the second issue. Further testing then uncovered the first issue. Test
results are summarized in this table:
=======================================================================================
Settings USB2 hotplug USB3 hotplug State after waking up
---------------------------------------------------------------------------------------
power/control=auto works fails broken
usbcore.autosuspend=-1 works works broken
OR power/control=on
power/control=auto works (1) works (1) works
and USB_QUIRK_RESET_RESUME
power/control=on works works works
and USB_QUIRK_RESET_RESUME
HUB_QUIRK_DISABLE_AUTOSUSPEND works works works
and USB_QUIRK_RESET_RESUME
In those results, the power/control settings are applied to both hubs,
both on the USB2 and USB3 side, before each test.
From those results, USB_QUIRK_RESET_RESUME is required to reset the hubs
properly after a suspend-wakeup cycle, and the hubs must not autosuspend
to work around the USB3 issue.
A secondary effect of USB_QUIRK_RESET_RESUME is to prevent the hubs'
upstream links from suspending (the downstream ports can still suspend).
This secondary effect is used in results (1). It is enough to solve the
USB3 problem.
Setting USB_QUIRK_RESET_RESUME on those hubs is the smallest patch that
solves both issues.
Prior to creating this patch, I have used the USB_QUIRK_RESET_RESUME via
the kernel command line for over a year without noticing any side
effect.
Thanks to Oliver Neukum @Suse for explanations of the operations of
USB_QUIRK_RESET_RESUME, and requesting more testing.
The DPS310 chip has been observed to get "stuck" such that pressure
and temperature measurements are never indicated as "ready" in the
MEAS_CFG register. The only solution is to reset the device and try
again. In order to avoid continual failures, use a boolean flag to
only try the reset after timeout once if errors persist.
Fixes: 8f5a52f1edbf ("iio: Add driver for Infineon DPS310") Cc: <stable@vger.kernel.org> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the startup procedure into a function, and correct a missing
check on the return code for writing the PRS_CFG register.
Cc: <stable@vger.kernel.org> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For reliable operation across the full range of supported
interface rates, the AD5593R needs a STOP condition between
address write, and data read (like show in the datasheet Figure 40)
so in turn i2c_smbus_read_word_swapped cannot be used.
While at it, a simple helper was added to make the code simpler.
Fixes: 733f78612889 ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Nuno Sá <nuno.sa@analog.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913073413.140475-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9b9e5f4e392f ("smb3: add smb3.1.1 to default dialect list")
extend the dialects from 3 to 4, but forget to decrease the extended
length when specific the dialect, then the message length is larger
than expected.
This maybe leak some info through network because not initialize the
message body.
After apply this patch, the VALIDATE_NEGOTIATE_INFO message length is
reduced from 28 bytes to 26 bytes.
Fixes: 9b9e5f4e392f ("smb3: add smb3.1.1 to default dialect list") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Cc: <stable@vger.kernel.org> Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the opposite case of kernel bugzilla 216301.
If we mmap a file using cache=none and then proceed to update the mmapped
area these updates are not reflected in a later pread() of that part of the
file.
To fix this we must first destage any dirty pages in the range before
we allow the pread() to proceed.
Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Every dma_map_single() call should have its dma_unmap_single() counterpart,
because the DMA address space is a shared resource and one could render the
machine unusable by consuming all DMA addresses.
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/ Cc: stable@vger.kernel.org Fixes: 7a02889dc4ef ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Alexander Dahl <ada@thorsis.com> Reported-by: Peter Rosin <peda@axentia.se> Tested-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ASUS ROG X16 (GV601R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.
The initial fix for ASUS G533Z was based on faulty information. This
fixes the pincfg to values that have been verified with no existing
module options or other hacks enabled.
Enables headphone jack, and 5.1 surround.
[ corrected the indent level by tiwai ]
Fixes: 0dfc0c434a5a ("ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack") Signed-off-by: Luke D. Jones <luke@ljones.dev> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221010065702.35190-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After some feedback from users with Dell Precision 5530 machines, this
patch reverts the previous change to add ALC289_FIXUP_DUAL_SPK.
While it improved the speaker output quality, it caused the headphone
jack to have an audible "pop" sound when power saving was toggled.
At an error path to release URB buffers and contexts, the driver might
hit a NULL dererence for u->urb pointer, when u->buffer_size has been
already set but the actual URB allocation failed.
Fix it by adding the NULL check of urb. Also, make sure that
buffer_size is cleared after the error path or the close.
When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources. However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.
Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.
The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.
Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.
We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices. This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.
Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too. The call is
race-safe as the function has a spinlock protection by itself.
Johannes Berg [Fri, 14 Oct 2022 16:47:05 +0000 (18:47 +0200)]
wifi: mac80211: fix MBSSID parsing use-after-free
Commit 30b9d21add3e87c164f0dd6558eec90aed012f56 upstream.
This is a different version of the commit, changed to store
the non-transmitted profile in the elems, and freeing it in
the few places where it's relevant, since that is only the
case when the last argument for parsing (the non-tx BSSID)
is non-NULL.
When we parse a multi-BSSID element, we might point some
element pointers into the allocated nontransmitted_profile.
However, we free this before returning, causing UAF when the
relevant pointers in the parsed elements are accessed.
Fix this by not allocating the scratch buffer separately but
as part of the returned structure instead, that way, there
are no lifetime issues with it.
The scratch buffer introduction as part of the returned data
here is taken from MLO feature work done by Ilan.
This fixes CVE-2022-42719.
Fixes: 1cdc5b1f9f77 ("mac80211: support profile split between elements") Co-developed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Fri, 14 Oct 2022 16:47:03 +0000 (18:47 +0200)]
mac80211: mlme: find auth challenge directly
There's no need to parse all elements etc. just to find the
authentication challenge - use cfg80211_find_elem() instead.
This also allows us to remove WLAN_EID_CHALLENGE handling
from the element parsing entirely.
Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.
A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.
When updating beacon elements in a non-transmitted BSS,
also update the hidden sub-entries to the same beacon
elements, so that a future update through other paths
won't trigger a WARN_ON().
The warning is triggered because the beacon elements in
the hidden BSSes that are children of the BSS should
always be the same as in the parent.
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: b397b5577905 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the tool on the other side (e.g. wmediumd) gets confused
about the rate, we hit a warning in mac80211. Silence that
by effectively duplicating the check here and dropping the
frame silently (in mac80211 it's dropped with the warning).
If a non-transmitted BSS shares enough information (both
SSID and BSSID!) with another non-transmitted BSS of a
different AP, then we can find and update it, and then
try to add it to the non-transmitted BSS list. We do a
search for it on the transmitted BSS, but if it's not
there (but belongs to another transmitted BSS), the list
gets corrupted.
Since this is an erroneous situation, simply fail the
list insertion in this case and free the non-transmitted
BSS.
This fixes CVE-2022-42721.
Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: b397b5577905 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple refcounting bugs related to multi-BSSID:
- In bss_ref_get(), if the BSS has a hidden_beacon_bss, then
the bss pointer is overwritten before checking for the
transmitted BSS, which is clearly wrong. Fix this by using
the bss_from_pub() macro.
- In cfg80211_bss_update() we copy the transmitted_bss pointer
from tmp into new, but then if we release new, we'll unref
it erroneously. We already set the pointer and ref it, but
need to NULL it since it was copied from the tmp data.
- In cfg80211_inform_single_bss_data(), if adding to the non-
transmitted list fails, we unlink the BSS and yet still we
return it, but this results in returning an entry without
a reference. We shouldn't return it anyway if it was broken
enough to not get added there.
Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).
Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.
This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.
I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.
Fixes: b397b5577905 ("cfg80211: Parsing of Multiple BSSID information in scanning") Fixes: 97b231328c65 ("mac80211: support multi-bssid") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the copy code of the elements, we do the following calculation
to reach the end of the MBSSID element:
/* copy the IEs after MBSSID */
cpy_len = mbssid[1] + 2;
This looks fine, however, cpy_len is a u8, the same as mbssid[1],
so the addition of two can overflow. In this case the subsequent
memcpy() will overflow the allocated buffer, since it copies 256
bytes too much due to the way the allocation and memcpy() sizes
are calculated.
Fix this by using size_t for the cpy_len variable.
This fixes CVE-2022-41674.
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: b397b5577905 ("cfg80211: Parsing of Multiple BSSID information in scanning") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, the fast pool was dumped into the main pool periodically in
the fast pool's hard IRQ handler. This worked fine and there weren't
problems with it, until RT came around. Since RT converts spinlocks into
sleeping locks, problems cropped up. Rather than switching to raw
spinlocks, the RT developers preferred we make the transformation from
originally doing:
This is an ordinary pattern done all over the kernel. However, Sherry
noticed a 10% performance regression in qperf TCP over a 40gbps
InfiniBand card. Quoting her message:
> MT27500 Family [ConnectX-3] cards:
> Infiniband device 'mlx4_0' port 1 status:
> default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1
> base lid: 0x6
> sm lid: 0x1
> state: 4: ACTIVE
> phys state: 5: LinkUp
> rate: 40 Gb/sec (4X QDR)
> link_layer: InfiniBand
>
> Cards are configured with IP addresses on private subnet for IPoIB
> performance testing.
> Regression identified in this bug is in TCP latency in this stack as reported
> by qperf tcp_lat metric:
>
> We have one system listen as a qperf server:
> [root@yourQperfServer ~]# qperf
>
> Have the other system connect to qperf server as a client (in this
> case, it’s X7 server with Mellanox card):
> [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat
Rather than incur the scheduling latency from queue_work_on, we can
instead switch to running on the next timer tick, on the same core. This
also batches things a bit more -- once per jiffy -- which is okay now
that mix_interrupt_randomness() can credit multiple bits at once.
Reported-by: Sherry Yang <sherry.yang@oracle.com> Tested-by: Paul Webb <paul.x.webb@oracle.com> Cc: Sherry Yang <sherry.yang@oracle.com> Cc: Phillip Goerl <phillip.goerl@oracle.com> Cc: Jack Vogel <jack.vogel@oracle.com> Cc: Nicky Veitch <nicky.veitch@oracle.com> Cc: Colm Harrington <colm.harrington@oracle.com> Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Tejun Heo <tj@kernel.org> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: stable@vger.kernel.org Fixes: b4d32c9bcc75 ("random: defer fast pool mixing to worker") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid reading and dirtying two cache lines on every IRQ,
move the work_struct to the bottom of the fast_pool struct. add_
interrupt_randomness() always touches .pool and .count, which are
currently split, because .mix pushes everything down. Instead, move .mix
to the bottom, so that .pool and .count are always in the first cache
line, since .mix is only accessed when the pool is full.
Fixes: b4d32c9bcc75 ("random: defer fast pool mixing to worker") Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior to 5.6, when /dev/random was opened with O_NONBLOCK, it would
return -EAGAIN if there was no entropy. When the pools were unified in
5.6, this was lost. The post 5.6 behavior of blocking until the pool is
initialized, and ignoring O_NONBLOCK in the process, went unnoticed,
with no reports about the regression received for two and a half years.
However, eventually this indeed did break somebody's userspace.
So we restore the old behavior, by returning -EAGAIN if the pool is not
initialized. Unlike the old /dev/random, this can only occur during
early boot, after which it never blocks again.
In order to make this O_NONBLOCK behavior consistent with other
expectations, also respect users reading with preadv2(RWF_NOWAIT) and
similar.
Fixes: 961b3c3c21e1 ("random: make /dev/random be almost like /dev/urandom") Reported-by: Guozihua <guozihua@huawei.com> Reported-by: Zhongguohua <zhongguohua1@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Andrew Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage. Switch things to be statically allocated which will fill the
unused fields with 0 automatically.
Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com Cc: stable@kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: hdthky <hdthky0@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans reported that his Sony VAIO VPX11S1E showed the broken sound
behavior at the start of the stream for a couple of seconds, and it
turned out that the position_fix=1 option fixes the issue. It implies
that the position reporting is inaccurate, and very likely hitting on
all Poulsbo devices.
The patch applies the workaround for Poulsbo generically to switch to
LPIB mode instead of the default position buffer.
Since the most that's mixed into the pool is sizeof(long)*2, don't
credit more than that many bytes of entropy.
Fixes: 4f280103bfeb ("random: do not use input pool from hard IRQs") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If creation or finalization of a checkpoint fails due to anomalies in the
checkpoint metadata on disk, a kernel warning is generated.
This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted
with panic_on_warn, does not panic. A nilfs_error is appropriate here to
handle the abnormal filesystem condition.
This also replaces the detected error codes with an I/O error so that
neither of the internal error codes is returned to callers.
projects / kernel.git / log