plat/arm/rddanielxlr: add platform function to return ROTPK
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel Config-XLR platform to support Trusted Board Boot. The
function makes use of the wrapper function provided by the arm common
trusted board boot function to get the ROTPK hash.
plat/arm/rddaniel: add platform function to return ROTPK
TBBR authentication framework depends on the plat_get_rotpk_info()
function to return the pointer to the Root of Trust Public Key (ROTPK)
stored in the platform along with its length. Add this function for
RD-Daniel platform to support Trusted Board Boot. The function makes use
of the wrapper function provided by the arm common trusted board boot
function to get the ROTPK hash.
This patch moves all GICv2 driver files into new added
'gicv2.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
NOTE: Usage of 'drivers/arm/gic/common/gic_common.c' file
is now deprecated and platforms with GICv2 driver need to
be modified to include 'drivers/arm/gic/v2/gicv2.mk' in
their makefiles.
This patch cleans up MISRA C violations in the IO driver files. Some
things did not make sense to fix or would require sweeping changes
but the simple issues have been resolved.
This change implements platform services for stm32mp1 to expose clock
and reset controllers over SCMI clock and reset domain protocols
in sp_min firmware.
Requests execution use a fastcall SMC context using a SiP function ID.
The setup allows the create SCMI channels by assigning a specific
SiP SMC function ID for each channel/agent identifier defined. In this
change, stm32mp1 exposes a single channel and hence expects single
agent at a time.
The input payload in copied in secure memory before the message
in passed through the SCMI server drivers. BL32/sp_min is invoked
for a single SCMI message processing and always returns with a
synchronous response message passed back to the caller agent.
This change fixes and updates STM32_COMMON_SIP_NUM_CALLS that was
previously wrongly set 4 whereas only 1 SiP SMC function ID was to
be counted. STM32_COMMON_SIP_NUM_CALLS is now set to 3 since the
2 added SiP SMC function IDs for SCMI services.
This patch redefines 'true' and 'false' definitions in
'include/lib/libc/stdbool.h' to fix defect reported by
MISRA C-2012 Rule 10.1
"The expression \"0\" of non-boolean essential type is
being interpreted as a boolean value for the operator \"? :\"."
SPMD: fix boundary check if manifest is page aligned
while mapping SPMC manifest page in the SPMD translation regime the
mapped size was resolved to zero if SPMC manifest base address is PAGE
aligned, causing SPMD to abort.
To fix the problem change mapped size to PAGE_SIZE if manifest base is
PAGE aligned.
Merge changes I9feae1fc,I5cbe7192,I1867ece3,I85c2434a,If8edeeec, ... into integration
* changes:
plat: marvell: armada: mcbin: squash several IO windows into one
plat: marvell: armada: fix BL32 extra parameters usage
drivers: marvell: Fix the LLC SRAM driver
plat: marvell: armada: a8k: change CCU LLC SRAM mapping
plat: marvell: armada: adjust trusted DRAM size to match OP-TEE OS
drivers: marvell: mg_conf_cm3: pass comphy lane number to AP FW
plat: marvell: armada: move mg conf related code to appropriate driver
marvell: comphy: start AP FW when comphy AP mode selected
drivers: marvell: mg_conf_cm3: add basic driver
tools: doimage: change the binary image alignment to 16
tools: doimage: migrate to mbedtls v2.8 APIs
plat/arm: Fix build failure due to increase in BL2 size
BL2 size gets increased due to the libfdt library update and
that eventually cause no-optimization build failure for BL2 as below:
aarch64-none-elf-ld.bfd: BL2 image has exceeded its limit.
aarch64-none-elf-ld.bfd: region `RAM' overflowed by 4096 bytes
Makefile:1070: recipe for target 'build/fvp/debug/bl2/bl2.elf' failed
make: *** [build/fvp/debug/bl2/bl2.elf] Error 1
Fixed build failure by increasing BL2 image size limit by 4Kb.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I92a57eb4db601561a98e254b64994bb921a88db3
- Fix the line address macro
- LLC invalidate and enable before ways lock for allocation
- Add support for limited SRAM size allocation
- Add SRAM RW test function
Change-Id: I1867ece3047566ddd7931bd7472e1f47fb42c8d4 Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
plat: marvell: armada: a8k: change CCU LLC SRAM mapping
The LLC SRAM will be enabled in OP-TEE OS for usage as secure storage.
The CCU have to prepare SRAM window, but point to the DRAM-0 target
until the SRAM is actually enabled.
This patch changes CCU SRAM window target to DRAM-0
Remove dependence between LLC_SRAM and LLC_ENABLE and update the
build documentation.
The SRAМ base moved to follow the OP-TEE SHMEM area (0x05400000)
Change-Id: I85c2434a3d515ec37da5ae8eb729e3280f91c456 Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
drivers: marvell: mg_conf_cm3: pass comphy lane number to AP FW
Since the AP process can be enabled on different setups, the information
about used comphy lane should be passed to AP FW. For instance:
- A8K development board uses comphy lane 2 for eth 0
- cn913x development board uses comphy lane 4 for eth 0
Change-Id: Icf001fb3eea4d9c24c09384e49844ecaf8655ad2 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Replace deprecated mbedtls_sha256 with mbedtls_sha256_ret
The mbedtls_pk_parse_key does not work correctly anymore
with the DER buffer embedded in the secure image extentson
using the buffer size as the the key length.
Move to mbedtls_pk_parse_subpubkey API that handles such
case correctly.
The DER format already contains the key length, so there
is no particular reason to supply it to the key parser.
Update the doimage version to 3.3
Change-Id: I0ec5ee84b7d1505b43138e0b7a6bdba44a6702b6 Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Jacky Bai [Wed, 3 Jun 2020 06:28:45 +0000 (14:28 +0800)]
plat: imx8mp: Add the basic support for i.MX8MP
The i.MX 8MP Media Applications Processor is part of the growing
i.MX8M family targeting the consumer and industrial market. It brings
an effective Machine Learning and AI accelerator that enables a new
class of applications. It is built in 14LPP to achieve both high
performance and low power consumption and relies on a powerful fully
coherent core complex based on a quad core Arm Cortex-A53 cluster and
Cortex-M7 low-power coprocessor, audio digital signal processor, machine
learning and graphics accelerators.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I98311ebc32bee20af05031492e9fc24d06e55f4a
plat/arm, dts: Update platform device tree for CoT
Included cot_descriptors.dtsi in platform device tree
(fvp_tb_fw_config.dts).
Also, updated the maximum size of tb_fw_config to 0x1800
in order to accomodate the device tree for CoT descriptors.
Follow up patch will parse the device tree for these CoT descriptors
and fill the CoT descriptor structures at runtime instead of using
static CoT descriptor structures in the code base.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I90122bc713f6842b82fb019b04caf42629b4f45a
Jacky Bai [Wed, 3 Jun 2020 06:24:38 +0000 (14:24 +0800)]
plat: imx8m: Move the gpc hw reg to a separate header file
Although the GPC provides the similar functions for all the
i.MX8M SoC family, the HW register offset and bit defines
still have some slight difference, so move the hw reg
offset & most of the bitfield defines in 'gpc_reg.h' that
is specific to each SoC.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I291c435fe98c2f6e6ff8fe0c715ff3a83daa6a0f
Andre Przywara [Wed, 8 Jul 2020 12:01:00 +0000 (13:01 +0100)]
arm_fpga: Predefine DTB and BL33 load addresses
The memory layout for the FPGA is fairly uniform for most of the FPGA
images, and we already assume that DRAM starts at 2GB by default.
Prepopulate PRELOADED_BL33_BASE and FPGA_PRELOADED_DTB_BASE to some
sane default values, to simplify building some stock image.
If people want to deviate from that, they can always override those
addresses on the make command line.
Change-Id: I2238fafb3f8253a01ad2d88d45827c141d9b29dd Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Thu, 25 Jun 2020 12:10:38 +0000 (13:10 +0100)]
arm_fpga: Support more CPU clusters
The maximum number of clusters is currently set to 2, which is quite
limiting. As there are FPGA images with 4 clusters, let's increase the
limit to 4.
Change-Id: I9a85ca07ebbd2a018ad9668536d867ad6b75e537 Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Updated the CoT binding document to show chain of trust relationship
with the help of 'authentication method' and 'authentication data'
instead of showing content of certificate and fixed rendering issue
while creating html page using this document.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib48279cfe786d149ab69ddc711caa381a50f9e2b
drivers/stm32_hash: register resources as secure or not
Register in the shared resources driver the secure or non-secure state
of the HASH instances. Note that only BL32 needs to register the
shared peripheral because BL2 does not embed the shared resources
driver.
Etienne Carriere [Wed, 13 May 2020 08:19:50 +0000 (10:19 +0200)]
stm32mp1: register shared resource per GPIO bank/pin
Introduce helper functions stm32mp_register_secure_gpio() and
stm32mp_register_non_secure_gpio() for drivers to register a
GPIO pin as secure or non-secure.
These functions are stubbed when shared resource driver is not
embedded in the BL image so that drivers do not bother whether they
shall register or not their resources.
Etienne Carriere [Wed, 13 May 2020 08:16:21 +0000 (10:16 +0200)]
stm32mp1: register shared resource per IOMEM address
Introduce helper functions stm32mp_register_secure_periph_iomem()
and stm32mp_register_non_secure_periph_iomem() for drivers to
register a resource as secure or non-secure based on its SoC
interface registers base address.
These functions are stubbed when shared resources driver is not
embedded (!STM32MP_SHARED_RESOURCES) so that drivers embedded
in other BL stages do not bother whether they shall register or
not their resources.
Define helper functions stm32mp_register_secure_periph() and
stm32mp_register_non_secure_periph() for platform drivers to
register a shared resource assigned to respectively secure
or non-secure world.
Some resources are related to clock resources. When a resource is
registered as secure, ensure its clock dependencies are also
registered as secure. Registering a non-secure resource does not
mandate its clock dependencies are also registered as non-secure.
Etienne Carriere [Wed, 13 May 2020 09:49:49 +0000 (11:49 +0200)]
drivers: st: clock: register parent of secure clocks
Introduce stm32mp1_register_clock_parents_secure() in stm32mp1
clock driver to allow platform shared resources to register as
secure the parent clocks of a clock registered as secure.
Etienne Carriere [Wed, 13 May 2020 13:51:56 +0000 (15:51 +0200)]
stm32mp1: shared resources: add trace messages
Define from helper functions to get a human readable string
identifier from a shared resource enumerated ID. Use them to
make debug traces more friendly peripheral registering functions.
drivers: arm: gicv3: auto-detect presence of GIC600-AE
This patch adds the IIDR value for GIC600-AE to the gicv3_is_gic600()
helper function. This helps platforms supporting this version of the
GIC600 interrupt controller to function with the generic GIC driver.
Verified with tftf-validation test suite
******************************* Summary *******************************
> Test suite 'Framework Validation'
Passed
> Test suite 'Timer framework Validation'
Passed
=================================
Tests Skipped : 0
Tests Passed : 6
Tests Failed : 0
Tests Crashed : 0
Total tests : 6
=================================
NOTICE: Exiting tests.
corstone700: splitting the platform support into FVP and FPGA
This patch performs the following:
- Creating two corstone700 platforms under corstone700 board:
fvp and fpga
- Since the FVP and FPGA have IP differences, this commit provides a specific DTS for each platform
- The platform can be specified using the TARGET_PLATFORM Makefile variable
(possible values are: fvp or fpga)
- Allowing to use u-boot by:
- Enabling NEED_BL33 option
- Fixing non-secure image base: For no preloaded bl33 we want to
have the NS base set on shared ram. Setup a memory map region
for NS in shared map and set the bl33 address in the area.
- Setting the SYS_COUNTER_FREQ_IN_TICKS based on the selected
platform
- Setting ARM_MAP_SHARED_RAM and ARM_MAP_NS_SHARED_RAM to use MT_MEMORY
Change-Id: I4c8ac3387acb1693ab617bcccab00d80e340c163 Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
fiptool: return zero status on help and help <command>
Querying the 'fiptool' for help or help <command> should return 0
return status (success) and not 1 (failure). In the other hand, if tool is
executed with any other command (not help) where command's parameters are
either missing or wrong, then the tool should return non-zero (failure). Now,
the 'usage' function caller is the one that passes the return status.
Luka Kovacic [Wed, 4 Dec 2019 20:46:37 +0000 (21:46 +0100)]
plat: marvell: armada: a8k: Add support for iEi Puzzle-M801 board
Add support for the iEi Puzzle-M801 board that is based on
the Marvell Armada 88F8040 SoC.
It supports 1 x 288-pin DIMM, DDR4 2400MHz up to 16 GB (ECC).
The iEi Puzzle-M801 board is using a custom MCU to handle board
power management. The MCU is managing the boards power LEDs, fans
and some other periferals. It's using UART for communication.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
Change-Id: I0826ef8bf651b69aad5803184f20930ac7212ef8
projects / arm-tf.git / log