When a qdisc is attached to the VRF device, the packet goes down the ndo
xmit function which is setup to send the packet back to the VRF driver
which does a lookup to send the packet out. The lookup in the VRF driver
is not considering xfrm policies. Change it to use ip6_dst_lookup_flow
rather than ip6_route_output.
Fixes: cd662513e003 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When team mode is changed or set, the team_mode_get() is called to check
whether the mode module is inserted or not. If the mode module is not
inserted, it calls the request_module().
In the request_module(), it creates a child process, which is
the "modprobe" process and waits for the done of the child process.
At this point, the following locks were used.
down_read(&cb_lock()); by genl_rcv()
genl_lock(); by genl_rcv_msc()
rtnl_lock(); by team_nl_cmd_options_set()
mutex_lock(&team->lock); by team_nl_team_get()
Concurrently, the team module could be removed by rmmod or "modprobe -r"
The __exit function of team module is team_module_exit(), which calls
team_nl_fini() and it tries to acquire following locks.
down_write(&cb_lock);
genl_lock();
Because of the genl_lock() and cb_lock, this process can't be finished
earlier than request_module() routine.
The problem secenario.
CPU0 CPU1
team_mode_get
request_module()
modprobe -r team_mode_roundrobin
team <--(B)
modprobe team <--(A)
team_mode_roundrobin
By request_module(), the "modprobe team_mode_roundrobin" command
will be executed. At this point, the modprobe process will decide
that the team module should be inserted before team_mode_roundrobin.
Because the team module is being removed.
By the module infrastructure, the same module insert/remove operations
can't be executed concurrently.
So, (A) waits for (B) but (B) also waits for (A) because of locks.
So that the hang occurs at this point.
Test commands:
while :
do
teamd -d &
killall teamd &
modprobe -rv team_mode_roundrobin &
done
The approach of this patch is to hold the reference count of the team
module if the team module is compiled as a module. If the reference count
of the team module is not zero while request_module() is being called,
the team module will not be removed at that moment.
So that the above scenario could not occur.
Fixes: 88d4fc0ae093 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: 44308a9c2d23 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb->sk does not always point to a full blown socket,
we need to use sk_fullsock() before accessing fields which
only make sense on full socket.
BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630
Fixes: 6dce1c3ceb4b ("net/sched: Make etf report drops on error_queue") Fixes: f37467d6ed91 ("net/sched: Introduce the ETF Qdisc") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a
reference of the specified x25_neigh object to "nb" with increased
refcnt.
When x25_lapb_receive_frame() returns, local variable "nb" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of
x25_lapb_receive_frame(). When pskb_may_pull() returns false, the
function forgets to decrease the refcnt increased by x25_get_neigh(),
causing a refcnt leak.
Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns
false.
Fixes: ccf900903725 ("x25: Handle undersized/fragmented skbs") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buggy address belongs to the variable:
div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b]
Memory state around the buggy address: ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00 ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa
>ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa
^ ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa
==================================================================
Digging into this indeed shows that the clock divider array is
lacking a final fence, and that the clock subsystems goes in the
weeds. Oh well.
Let's add the empty structure that indicates the end of the array.
Fixes: c74c17fb7ea2 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nr_add_node() invokes nr_neigh_get_dev(), which returns a local
reference of the nr_neigh object to "nr_neigh" with increased refcnt.
When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The issue happens in one normal path of nr_add_node(), which forgets to
decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt
leak. It should decrease the refcnt before the function returns like
other normal paths do.
Fix this issue by calling nr_neigh_put() before the nr_add_node()
returns.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5a5e5814fef6 ("net/mlx4_en: add xdp forwarding and data write support")
brought another indirect call in fast path.
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
when/if CONFIG_RETPOLINE=y
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mlxsw_sp_acl_rulei_create() function is supposed to return an error
pointer from mlxsw_afa_block_create(). The problem is that these
functions both return NULL instead of error pointers. Half the callers
expect NULL and half expect error pointers so it could lead to a NULL
dereference on failure.
This patch changes both of them to return error pointers and changes all
the callers which checked for NULL to check for IS_ERR() instead.
Fixes: e2a621d5be69 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.
The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.
Test commands:
ip netns add nst
ip netns exec nst ip link add bond0 type bond
for i in {0..10}
do
ip netns exec nst ip link add dummy$i type dummy
ip netns exec nst ip link add macvlan$i link dummy$i \
type macvlan mode passthru
ip netns exec nst ip link set macvlan$i master bond0
done
ip netns del nst
Fixes: 056b3bdf68d0 ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.
Test commands:
ip link add dummy0 mtu 10 type dummy
ip link add macsec0 link dummy0 type macsec
ip link show macsec0
Before:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0
Fixes: 4f0c7417cca8 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit bd1a75df296b ("ipv6: restrict IPV6_ADDRFORM operation") fixed a
problem found by syzbot an unfortunate logic error meant that it
also broke IPV6_ADDRFORM.
Rearrange the checks so that the earlier test is just one of the series
of checks made before moving the socket from IPv6 to IPv4.
Fixes: bd1a75df296b ("ipv6: restrict IPV6_ADDRFORM operation") Signed-off-by: John Haxby <john.haxby@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The WARN_ON is triggered in fib_select_default which is invoked when
there are multiple default routes. Update the function to use
fib_info_nhc and convert the nexthop checks to use fib_nh_common.
Add test case that covers the affected code path.
[0] https://github.com/FRRouting/frr/issues/6089
Fixes: 1d8053328272 ("ipv4: Allow routes to use nexthop objects") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fetching PTP sync information from mailbox is slow and can take
up to 10 milliseconds. Reduce this unnecessary delay by directly
reading the information from the corresponding registers.
Fixes: daba72129334 ("cxgb4: Add PTP Hardware Clock (PHC) support") Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the absence of MC1, the size calculation function
cudbg_mem_region_size() was returing wrong MC size and
resulted in adapter crash. This patch adds new argument
to cudbg_mem_region_size() which will have actual size
and returns error to caller in the absence of MC1.
Fixes: 75c85be3c1f6 ("cxgb4: collect MC memory dump") Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that consists
of a PCIe switch and two PCIe endpoints:
+-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
+-01.0-[04-36]-- DS hotplug port
+-02.0-[37]----00.0 xHCI controller
\-04.0-[38-6b]-- DS hotplug port
The root port (1b.0) and the PCIe switch downstream ports are all PCIe Gen3
so they support 8GT/s link speeds.
We wait for the PCIe hierarchy to enter D3cold (runtime):
pcieport 0000:00:1b.0: power state changed by ACPI to D3cold
When it wakes up from D3cold, according to the PCIe 5.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that we
must follow the rules in PCIe 5.0 section 6.6.1.
For the PCIe Gen3 ports we are dealing with here, the following applies:
With a Downstream Port that supports Link speeds greater than 5.0 GT/s,
software must wait a minimum of 100 ms after Link training completes
before sending a Configuration Request to the device immediately below
that Port. Software can determine when Link training completes by polling
the Data Link Layer Link Active bit or by setting up an associated
interrupt (see Section 6.7.3.3).
Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):
0000:00:1b.0: wait for 100 ms after DLLLA is set before access to 0000:01:00.0
0000:02:00.0: wait for 100 ms after DLLLA is set before access to 0000:03:00.0
0000:02:02.0: wait for 100 ms after DLLLA is set before access to 0000:37:00.0
I've instrumented the kernel with some additional logging so we can see the
actual delays performed:
pcieport 0000:00:1b.0: power state changed by ACPI to D0
pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
For the switch upstream port (01:00.0 reachable through 00:1b.0 root port)
we wait for 100 ms but not taking into account the DLLLA requirement. We
then wait 10 ms for D3hot -> D0 transition of the root port and the two
downstream hotplug ports. This means that we deviate from what the spec
requires.
Performing the same check for system sleep (s2idle) transitions it turns
out to be even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8. there is a specific _DSM that allows the OS to skip the delays but
this platform does not provide the _DSM and does not go to S3 anyway so no
firmware is involved that could already handle these delays.
On this particular platform these delays are not actually needed because
there is an additional delay as part of the ACPI power resource that is
used to turn on power to the hierarchy but since that additional delay is
not required by any of standards (PCIe, ACPI) it is not present in the
Intel Ice Lake, for example where missing the mandatory delays causes
pciehp to start tearing down the stack too early (links are not yet
trained). Below is an example how it looks like when this happens:
pcieport 0000:83:04.0: pciehp: Slot(4): Card not present
pcieport 0000:87:04.0: PME# disabled
pcieport 0000:83:04.0: pciehp: pciehp_unconfigure_device: domain:bus:dev = 0000:86:00
pcieport 0000:86:00.0: Refused to change power state, currently in D3
pcieport 0000:86:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x201ff)
pcieport 0000:86:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
...
There is also one reported case (see the bugzilla link below) where the
missing delay causes xHCI on a Titan Ridge controller fail to runtime
resume when USB-C dock is plugged. This does not involve pciehp but instead
the PCI core fails to runtime resume the xHCI device:
pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3
xhci_hcd 0000:39:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff)
xhci_hcd 0000:39:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0)
...
Add a new function pci_bridge_wait_for_secondary_bus() that is called on
PCI core resume and runtime resume paths accordingly if the bridge entered
D3cold (and thus went through reset).
This is second attempt to add the missing delays. The previous solution in 20e18c1fde08 ("PCI: Add missing link delays required by the PCIe spec") was
reverted because of two issues it caused:
1. One system become unresponsive after S3 resume due to PME service
spinning in pcie_pme_work_fn(). The root port in question reports that
the xHCI sent PME but the xHCI device itself does not have PME status
set. The PME status bit is never cleared in the root port resulting
the indefinite loop in pcie_pme_work_fn().
2. Slows down resume if the root/downstream port does not support Data
Link Layer Active Reporting because pcie_wait_for_link_delay() waits
1100 ms in that case.
This version should avoid the above issues because we restrict the delay to
happen only if the port went into D3cold.
Previously Clock PM could not be re-enabled after being disabled by
pci_disable_link_state() because clkpm_capable was reset. Change this by
adding a clkpm_disable field similar to aspm_disable.
Obtain the unique IDs from the RLL and RPL instead of VPD page 83h.
Link: https://lore.kernel.org/r/157048751833.11757.11996314786914610803.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use sas_phy_delete rather than sas_phy_free which, according to
comments, should not be called for PHYs that have been set up
successfully.
Link: https://lore.kernel.org/r/157048748876.11757.17773443136670011786.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Murthy Bhat <Murthy.Bhat@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/r/157048748297.11757.3872221216800537383.stgit@brunhilda Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Let's change the mapping between virtqueue_add errors to BLK_STS
statuses, so that -ENOSPC, which indicates virtqueue full is still
mapped to BLK_STS_DEV_RESOURCE, but -ENOMEM which indicates non-device
specific resource outage is mapped to BLK_STS_RESOURCE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20200213123728.61216-3-pasic@linux.ibm.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the ftrace selftests can run for a long period of time, disable the
timeout that the general selftests have. If a selftest hangs, then it
probably means the machine will hang too.
Link: https://lore.kernel.org/r/alpine.LSU.2.21.1911131604170.18679@pobox.suse.cz Suggested-by: Miroslav Benes <mbenes@suse.cz> Tested-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check if DMA pages were successfully allocated in initialization
before calling free. For many types of memory (like sgbufs)
the extra free is harmless, but not all backends track allocation
state, so add an explicit check.
This addresses deadlocks in these common cases in hierarchies containing
two switches:
- All involved ports are runtime suspended and they are unplugged. This
can happen easily if the drivers involved automatically enable runtime
PM (xHCI for example does that).
- System is suspended (e.g., closing the lid on a laptop) with a dock +
something else connected, and the dock is unplugged while suspended.
INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds.
irq/190-pciehp D 0 2288 2 0x80000000
Call Trace:
__schedule+0x2a2/0x880
schedule+0x2c/0x80
schedule_preempt_disabled+0xe/0x10
mutex_lock+0x2c/0x30
pci_lock_rescan_remove+0x15/0x20
pciehp_unconfigure_device+0x4d/0x140
pciehp_disable_slot+0x6a/0x110
pciehp_handle_presence_or_link_change+0x263/0x400
pciehp_ist+0x1c9/0x1d0
irq_thread_fn+0x24/0x60
irq_thread+0xeb/0x190
kthread+0x120/0x140
What happens here is that the whole hierarchy is runtime resumed and the
parent PCIe downstream port, which got the hot-remove event, starts
removing devices below it, taking pci_lock_rescan_remove() lock. When the
child PCIe port is runtime resumed it calls pciehp_check_presence() which
ends up calling pciehp_card_present() and pciehp_check_link_active(). Both
of these use pcie_capability_read_word(), which notices that the underlying
device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the
capability value set to 0. When pciehp gets this value it thinks that its
child device is also hot-removed and schedules its IRQ thread to handle the
event.
The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove() which is already taken by the parent and the
parent waits for the child's IRQ thread to finish.
Prevent this from happening by checking the return value of
pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop
performing any hot-removal activities.
[bhelgaas: add common scenarios to commit log] Link: https://lore.kernel.org/r/20191029170022.57528-2-mika.westerberg@linux.intel.com Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
In some scenario like 1366x768 VSR enabled connected with a 4K monitor
and playing 4K video in clone mode, underflow will be observed due to
decrease dppclk when previouse surface scan isn't finished
[How]
In this use case, surface flip is switching between 4K and 1366x768,
1366x768 needs smaller dppclk, and when decrease the clk and previous
surface scan is for 4K and scan isn't done, underflow will happen. Not
doing optimize bandwidth in case of flip pending.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Depending on the current link state the steps to resume the link to U0
varies. The normal case when a port is suspended (U3) we set the link
to U0 and wait for a port event when U3exit completed and port moved to
U0.
If the port is in U1/U2, then no event is issued, just set link to U0
If port is in Resume or Recovery state then the device has already
initiated resume, and this host initiated resume is racing against it.
Port event handler for device initiated resume will set link to U0,
just wait for the port to reach U0 before returning.
The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.
I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.
For now let's use the less ideal method by polling PLS.
[use usleep_range(), and shorten the delay time while polling -Mathias] Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE.
Input is not working.
The MPMAN MPWIN895CL tablet almost fully works with out default settings.
The only problem is that it has only 1 speaker so any sounds only playing
on the right channel get lost.
Add a quirk for this model using the default settings + MONO_SPEAKER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
If a plane isn't being actively enabled or disabled then DC won't
always recalculate scaling rects and ratios for the primary plane.
This results in only a partial or corrupted rect being displayed on
the screen instead of scaling to fit the screen.
[How]
Add back the logic to recalculate the scaling rects into
dc_commit_updates_for_stream since this is the expected place to
do it in DC.
This was previously removed a few years ago to fix an underscan issue
but underscan is still functional now with this change - and it should
be, since this is only updating to the latest plane state getting passed
in.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The newer 2711 and 7211 chips have two PWM controllers and failure to
dynamically allocate the PWM base would prevent the second PWM
controller instance being probed for succeeding with an -EEXIST error
from alloc_pwms().
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should always be disabled after the removal of the
PWM chip, even if the latter failed.
On a 32-bit kernel, the upper bits of userspace addresses passed via
various ioctls are silently ignored by the nvme driver.
However on a 64-bit kernel running a compat task, these upper bits are
not ignored and are in fact required to be zero for the ioctls to work.
Unfortunately, this difference matters. 32-bit smartctl submits the
NVME_IOCTL_ADMIN_CMD ioctl with garbage in these upper bits because it
seems the pointer value it puts into the nvme_passthru_cmd structure is
sign extended. This works fine on 32-bit kernels but fails on a 64-bit
one because (at least on my setup) the addresses smartctl uses are
consistently above 2G. For example:
# smartctl -x /dev/nvme0n1
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.11] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Bad address
Since changing 32-bit kernels to actually check all of the submitted
address bits now would break existing userspace, this patch fixes the
compat problem by explicitly zeroing the upper bits in the compat case.
This enables 32-bit smartctl to work on a 64-bit kernel.
Signed-off-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
MCE handling on pSeries platform fails as recent rework to use common
code for pSeries and PowerNV in machine check error handling tries to
access per-cpu variables in realmode. The per-cpu variables may be
outside the RMO region on pSeries platform and needs translation to be
enabled for access. Just moving these per-cpu variable into RMO region
did'nt help because we queue some work to workqueues in real mode, which
again tries to touch per-cpu variables. Also fwnmi_release_errinfo()
cannot be called when translation is not enabled.
This patch fixes this by enabling translation in the exception handler
when all required real mode handling is done. This change only affects
the pSeries platform.
Without this fix below kernel crash is seen on injecting
SLB multihit:
That commit does not play well with soft-masked irq state
manipulations in idle, interrupt replay, and possibly others due to
tracing code sometimes using irq_work_queue (e.g., in
trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when
it is not expected, and be ignored or cleared or cause warnings.
The net result seems to be missing an irq_work until the next timer
interrupt in the worst case which is usually not going to be noticed,
however it could be a long time if the tick is disabled, which is
against the spirit of irq_work and might cause real problems.
The idea is still solid, but it would need more work. It's not really
clear if it would be worth added complexity, so revert this for
now (not a straight revert, but replace with a comment explaining why
we might see interrupts happening, and gives git blame something to
find).
Fixes: 3b07c5ecfcc6 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If the backing device for a loop device is itself a block device,
then mirror the "write zeroes" capabilities of the underlying
block device into the loop device. Copy this capability into both
max_write_zeroes_sectors and max_discard_sectors of the loop device.
The reason for this is that REQ_OP_DISCARD on a loop device translates
into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
presents a consistent interface for loop devices (that discarded data
is zeroed), regardless of the backing device type of the loop device.
There should be no behavior change for loop devices backed by regular
files.
This change fixes blktest block/003, and removes an extraneous
error print in block/013 when testing on a loop device backed
by a block device that does not support discard.
Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[used updated version of Evan's comment in loop_config_discard()]
[moved backingq to local scope, removed redundant braces] Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The io_subchannel driver will do so when the associated
ccw_device has been registered -- but unconditionally, so more
ADD uevents will be generated if a subchannel has been unbound
from the io_subchannel driver and later rebound.
To fix this, only generate the ADD event if uevents were still
suppressed for the device.
Fixes: d77319941523 ("s390: cio: Delay uevents for subchannels")
Message-Id: <20200327124503.9794-2-cohuck@redhat.com> Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The common I/O layer delays the ADD uevent for subchannels and
delegates generating this uevent to the individual subchannel
drivers. The vfio-ccw I/O subchannel driver, however, did not
do that, and will not generate an ADD uevent for subchannels
that had not been bound to a different driver (or none at all,
which also triggers the uevent).
Generate the ADD uevent at the end of the probe function if
uevents were still suppressed for the device.
You can build a user-space test program for the raid6 library code,
like this:
$ cd lib/raid6/test
$ make
The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)
Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)
This does not work on Ubuntu where /bin/sh is a symbolic link to dash.
I see lots of
/bin/sh: 1: Syntax error: Bad fd number
and
warning "your version of binutils lacks ... support"
Replace it with portable '>/dev/null 2>&1'.
Fixes: f3829f66cc2a ("lib/raid6: build proper files on corresponding arch") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
The upper 32-bit physical address gets truncated inadvertently
when dma_direct_get_required_mask() invokes phys_to_dma_direct().
This results in dma_addressing_limited() return incorrect value
when used in platforms with LPAE enabled.
Fix it here by explicitly type casting 'max_pfn' to phys_addr_t
in order to prevent overflow of intermediate value while evaluating
'(max_pfn - 1) << PAGE_SHIFT'.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
After v_total_min and max are updated in vrr structure, the changes are
not reflected in stream adjust. When these values are read from stream
adjust it does not reflect the actual state of the system.
[How]
Set stream adjust values equal to vrr adjust values after vrr adjust
values are updated.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device
(1) ns scanning triggers disk revalidation -> update disk info ->
freeze queue -> but blocked, due to (2)
(2) timeout handler reference the g_usage_counter - > but blocks in
the transport .timeout() handler, due to (3)
(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)
(4) ANA update takes the (down_write) namespaces_rwsem -> calls
nvme_mpath_set_live() -> which synchronize the ns_head srcu
(see commit 914527745435) -> but blocks, due to (5)
(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
direct_make_request > blk_queue_enter -> but blocked, due to (1)
==> the request queue is under freeze -> deadlock.
The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).
Fixes: 417eda0f497cb ("nvme: add ANA support") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the daemon is restarted or crashes while logging out of a session, the
unbind session event sent by the kernel is not processed and is lost. When
the daemon starts again, the session can't be unbound because the daemon is
waiting for the event message. However, the kernel has already logged out
and the event will not be resent.
When iscsid restart is complete, logout session reports error:
Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions
Make sure the unbind event is emitted.
[mkp: commit desc and applied by hand since patch was mangled]
We cannot look at blk_rq_payload_bytes without first checking
that the request has a mappable physical segments first (e.g.
blk_rq_nr_phys_segments(rq) != 0) and only then to take the
request payload bytes. This caused us to send a wrong sgl to
the target or even dereference a non-existing buffer in case
we actually got to the data send sequence (if it was in-capsule).
Reported-by: Tony Asleson <tasleson@redhat.com> Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Runtime PM should be enabled before calling pwmchip_add(), as PWM users
can appear immediately after the PWM chip has been added.
Likewise, Runtime PM should be disabled after the removal of the PWM
chip.
1. try_get_cap_refs() fails to get caps and finds that mds_wanted
does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
stale) already includes caps wanted by open file, so it skips
updating wanted caps.
Above events can cause an infinite loop inside ceph_get_caps().
Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.
During target side fault injections, it is possible to hit the
NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit
fixed a rebind and delete race condition, but called lpfc_nlp_put
unconditionally. This triggered a deletion and the crash.
Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp
will be being unregistered/removed. Leave the reference if the flag isn't
set.
Link: https://lore.kernel.org/r/20200322181304.37655-8-jsmart2021@gmail.com Fixes: f3aebbe79076 ("scsi: lpfc: Fix nvme remoteport registration race conditions") Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Injecting EEH on a 32GB card is causing kernel oops
The pci error handler is doing an IO flush and the offline code is also
doing an IO flush. When the 1st flush is complete the hdwq is destroyed
(freed), yet the second flush accesses the hdwq and crashes.
Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH
flag and the hdwq pointer to see if it is already set and not already
freed.
Link: https://lore.kernel.org/r/20200322181304.37655-6-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676
...
Call Trace:
dump_stack+0x96/0xe0
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
print_address_description.constprop.6+0x1b/0x220
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
__kasan_report.cold.9+0x37/0x7c
? lpfc_unreg_login+0x7c/0xc0 [lpfc]
kasan_report+0xe/0x20
lpfc_unreg_login+0x7c/0xc0 [lpfc]
lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
...
When processing the completion of a "Reg Rpi" login mailbox command in
lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is
extracted from the completing mailbox context and passed as an input for
the next. However, the vpi stored in the mailbox command context is an
absolute vpi, which for SLI4 represents both base + offset. When used with
a non-zero base component, (function id > 0) this results in an
out-of-range access beyond the allocated phba->vpi_ids array.
Fix by subtracting the function's base value to get an accurate vpi number.
Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the watchdog core does not initialize the last_hw_keepalive
time during watchdog startup. This will cause the watchdog to be pinged
immediately if enough time has passed from the system boot-up time, and
some types of watchdogs like K3 RTI does not like this.
To avoid the issue, setup the last_hw_keepalive time during watchdog
startup.
Clang reports a warning on the __tlbi(aside1is, 0) macro expansion since
the value size does not match the register size specified in the inline
asm. Construct the ASID value using the __TLBI_VADDR() macro.
Fixes: 4c991f371442 ("arm64: compat: Workaround Neoverse-N1 #1542419 for compat user-space") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Compat user-space is unable to perform ICIMVAU instructions from
user-space. Instead it uses a compat-syscall. Add the workaround for
Neoverse-N1 #1542419 to this code path.
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Systems affected by Neoverse-N1 #1542419 support DIC so do not need to
perform icache maintenance once new instructions are cleaned to the PoU.
For the errata workaround, the kernel hides DIC from user-space, so that
the unnecessary cache maintenance can be trapped by firmware.
To reduce the number of traps, produce a fake IminLine value based on
PAGE_SIZE.
Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
when creating a new ipip interface with no local/remote configuration,
the lookup is done with TUNNEL_NO_KEY flag, making it impossible to
match the new interface (only possible match being fallback or metada
case interface); e.g: `ip link add tunl1 type ipip dev eth0`
To fix this case, adding a flag check before the key comparison so we
permit to match an interface with no local/remote config; it also avoids
breaking possible userland tools relying on TUNNEL_NO_KEY flag and
uninitialised key.
context being on my side, I'm creating an extra ipip interface attached
to the physical one, and moving it to a dedicated namespace.
Fixes: e7ccb3806ba4 ("GRE: Refactor GRE tunneling code.") Signed-off-by: William Dauchy <w.dauchy@criteo.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In f2fs_listxattr, there is no boundary check before
memcpy e_name to buffer.
If the e_name_len is corrupted,
unexpected memory contents may be returned to the buffer.
Signed-off-by: Randall Huang <huangrandall@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Currently we check for is_branch_taken() only if either K is source, or source
is a scalar value that is const. For upstream it would be good to extend this
properly to check whether dst is const and src not.
For the sake of the test_verifier, it is probably not needed here:
# ./test_verifier 101
#101/p bpf_get_stack return R0 within range OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
I haven't seen this issue in test_progs* though, they are passing fine:
Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.
The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.
With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],
After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.
Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.
Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.
Daniel Borkmann [Tue, 21 Apr 2020 13:01:49 +0000 (15:01 +0200)]
bpf: fix buggy r0 retval refinement for tracing helpers
[ no upstream commit ]
See the glory details in c96b5434bd98 ("bpf: Verifier, do_refine_retval_range
may clamp umin to 0 incorrectly") for why d055298bb70d ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") is buggy. The whole series however
is not suitable for stable since it adds significant amount [0] of verifier
complexity in order to add 32bit subreg tracking. Something simpler is needed.
Unfortunately, reverting d055298bb70d ("bpf/verifier: refine retval R0 state
for bpf_get_stack helper") or just cherry-picking c96b5434bd98 ("bpf: Verifier,
do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since
it will break existing tracing programs badly (at least those that are using
bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is
also not an option since on 4.19 kernels an error will cause a soft-lockup due
to hitting dead-code sanitized branch since we don't hard-wire such branches
in old kernels yet. But even then for 5.x d055298bb70d ("bpf/verifier: refine
retval R0 state for bpf_get_stack helper") would cause wrong bounds on the
verifier simluation when an error is hit.
In one of the earlier iterations of mentioned patch series for upstream there
was the concern that just using smax_value in do_refine_retval_range() would
nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1]
which eventually led to the 32bit subreg tracking in the first place. While I
initially went for implementing the idea [1] to pattern match the two shift
operations, it turned out to be more complex than actually needed, meaning, we
could simply treat do_refine_retval_range() similarly to how we branch off
verification for conditionals or under speculation, that is, pushing a new
reg state to the stack for later verification. This means, instead of verifying
the current path with the ret_reg in [S32MIN, msize_max_value] interval where
later bounds would get nuked, we split this into two: i) for the success case
where ret_reg can be in [0, msize_max_value], and ii) for the error case with
ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds
during these shift patterns and can match reg < 0 test. test_progs also succeed
with this approach.
One way to prevent this deadlock scenario from happening is to not
allow writing to userspace while holding the key semaphore. Instead,
an internal buffer is allocated for getting the keys out from the
read method first before copying them out to userspace without holding
the lock.
That requires taking out the __user modifier from all the relevant
read methods as well as additional changes to not use any userspace
write helpers. That is,
1) The put_user() call is replaced by a direct copy.
2) The copy_to_user() call is replaced by memcpy().
3) All the fault handling code is removed.
Compiling on a x86-64 system, the size of the rxrpc_read() function is
reduced from 3795 bytes to 2384 bytes with this patch.
Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable 'name' is released multiple times in the error path,
which may cause double free issues.
This problem is avoided by adding a goto label to release the memory
uniformly. And this change also makes the code a bit more cleaner.
This function is only called from lpddr_probe(). We free "lpddr" both
here and in the caller, so it's a double free. The best place to free
"lpddr" is in lpddr_probe() so let's delete this one.
When writing the bad block marker to the OOB area the access mode
should be set to MTD_OPS_RAW as it is done for reading the marker.
Currently this only works because req.mode is initialized to
MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for
req.mode != MTD_OPS_AUTO_OOB.
Fix this by explicitly setting req.mode to MTD_OPS_RAW.
Fixes: 9d920af6b0c0 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The __torture_print_stats() function in locktorture.c carefully
initializes local variable "min" to statp[0].n_lock_acquired, but
then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail
field should normally be zero, and given the initialization, it seems
reasonable to display the maximum and minimum number acquisitions
instead of miscomputing the maximum and minimum number of failures.
This commit therefore switches from failures to acquisitions.
And this turns out to be not only a day-zero bug, but entirely my
own fault. I hate it when that happens!
Fixes: f23b4274a5e7 ("locktorture: Add a lock-torture kernel module") Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ev_byte_channel_send() assumes that its third argument is a 16 byte
array. Some places where it is called it may not be (or we can't
easily tell if it is). Newer compilers have started producing warnings
about this, so make sure we actually pass a 16 byte array.
There may be more elegant solutions to this, but the driver is quite
old and hasn't been updated in many years.
The warnings (from a powerpc allyesconfig build) are:
In file included from include/linux/byteorder/big_endian.h:5,
from arch/powerpc/include/uapi/asm/byteorder.h:14,
from include/asm-generic/bitops/le.h:6,
from arch/powerpc/include/asm/bitops.h:250,
from include/linux/bitops.h:29,
from include/linux/kernel.h:12,
from include/asm-generic/bug.h:19,
from arch/powerpc/include/asm/bug.h:109,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/gfp.h:5,
from include/linux/slab.h:15,
from drivers/tty/ehv_bytechan.c:24:
drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’:
arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds]
298 | r6 = be32_to_cpu(p[1]);
include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’
40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
| ^
arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’
298 | r6 = be32_to_cpu(p[1]);
| ^~~~~~~~~~~
drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’
166 | static void ehv_bc_udbg_putc(char c)
| ^~~~~~~~~~~~~~~~
Fixes: 1a700e2d8bc9 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
[mpe: Trim warnings from change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
if (fb_logo.depth > 4 && depth > 4) {
^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
else
^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
return ret;
^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
if (!ret)
^
2 warnings generated.
This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.
The chip is configured in 24 bit mode. The values read from
it must always be treated as is. This fixes the issue by
replacing the previous 16 bits value by a 24 bits buffer.
This changes affects the value output by previous version of
the driver, since the least significant byte was missing.
The upper half of 16 bit values previously output are now
the upper half of a 24 bit value.
Fixes: e3a6fe60a567 ("iio: light: introduce si1133") Reported-by: Simon Goyette <simon.goyette@gmail.com> Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it. It depends
on the compiler. The solution is just to replace the assignment with an
memcpy().
Fixes: 294ef0c9e82d ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Peter Rosin <peda@axentia.se> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 2f50903bc269 ("dma-mapping: implement dma_map_single_attrs using
dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update
type2name string table. This causes incorrect displaying of dma allocation
type.
Fix it by removing "page" string from type2name string table and switch to
use named initializers.
Commit c76eede715b5 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.
The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.
Fixes: c76eede715b5 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.
The first tell-tale symptom of this issue is:
nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]
appearing in dmesg, likely followed by many other failures being logged.
Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race condition that we may miss to wait for all node pages
writeback, fix it.
- fsync() - shrink
- f2fs_do_sync_file
- __write_node_page
- set_page_writeback(page#0)
: remove DIRTY/TOWRITE flag
- f2fs_fsync_node_pages
: won't find page #0 as TOWRITE flag was removeD
- f2fs_wait_on_node_pages_writeback
: wont' wait page #0 writeback as it was not in fsync_node_list list.
- f2fs_add_fsync_node_entry
Fixes: f0efe3997d65 ("f2fs: fix to avoid broken of dnode block list") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However,
this requires 21 bits (Please see the AMD IOMMU specification).
This leads to the potential failure when the bit 51 of SPA of
the GCR3 table root pointer is 1'.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Fixes: a0fbfcf660937 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "cmd" comes from the user and it can be up to 255. It it's more
than the number of bits in long, it results out of bounds read when we
check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is
ND_CMD_CALL (10) so I added a compare against that.
Fixes: 430ef3231e6d ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Intel Compute Stick `STK1A32SC` can have a system vendor of
"Intel(R) Client Systems".
Broaden the Intel Compute Stick DMI checks so that they match "Intel
Corporation" as well as "Intel(R) Client Systems".
This fixes an issue where the STK1A32SC compute sticks were still
exposing a battery with the existing blacklist entry.
Signed-off-by: Jeffery Miller <jmiller@neverware.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the
function csky_start_secondary() to the function .init.text:init_fpu()
The function csky_start_secondary() references
the function __init init_fpu().
This is often because csky_start_secondary lacks a __init
annotation or the annotation of init_fpu is wrong.
xdr_buf_read_mic() tries to find unused contiguous space in a
received xdr_buf in order to linearize the checksum for the call
to gss_verify_mic. However, the corner cases in this code are
numerous and we seem to keep missing them. I've just hit yet
another buffer overrun related to it.
This logic assumes the transport has set the length of the tail
based on the size of the received message. base + len is then
supposed to be off the end of the message but still within the
actual buffer.
In fact, the length of the tail is set by the upper layer when the
Call is encoded so that the end of the tail is actually the end of
the allocated buffer itself. This causes the logic above to set
mic->data to point past the end of the receive buffer.
The "mic->data = head" arm of this if statement is no less fragile.
As near as I can tell, this has been a problem forever. I'm not sure
that minimizing au_rslack recently changed this pathology much.
So instead, let's use a more straightforward approach: kmalloc a
separate buffer to linearize the checksum. This is similar to
how gss_validate() currently works.
Coming back to this code, I had some trouble understanding what
was going on. So I've cleaned up the variable naming and added
a few comments that point back to the XDR definition in RFC 2203
to help guide future spelunkers, including myself.
As an added clean up, the functionality that was in
xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(),
as that is its only caller.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / kernel.git / log