Implemented a parser which populates the properties of
the CoT descriptors as per the binding document [1].
'COT_DESC_IN_DTB' build option is disabled by default and can
be enabled in future for all Arm platforms by making necessary
changes in the memory map.
Currently, this parser is tested only for FVP platform.
Andre Przywara [Fri, 11 Sep 2020 08:18:09 +0000 (09:18 +0100)]
SPE: Fix feature detection
Currently the feature test for the SPE extension requires the feature
bits in the ID_AA64DFR0 register to read exactly 0b0001.
However the architecture guarantees that any values greater than 0
indicate the presence of a feature, which is what we are after in
our spe_supported() function.
Change the comparison to include all values greater than 0.
This fixes SPE support in non-secure world on implementations which
include the Scalable Vector Extension (SVE), for instance on Zeus cores.
Change-Id: If6cbd1b72d6abb8a303e2c0a7839d508f071cdbe Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Sami Mujawar [Thu, 30 Apr 2020 11:40:22 +0000 (12:40 +0100)]
Fix fiptool packaging issue on windows
Windows does not have a standard getopt implementation. To address
this an equivalent implementation has been provided in win_posix.c
However, the implementation has an issue with option processing as
described below.
Long option names may be abbreviated if the abbreviation is unique
or an exact match for some defined option.
Since some options can be substring of other options e.g. "scp-fw"
option is a substring of "scp-fwu-cfg", we need to identify if an
option is abbreviated and also check for uniqueness. Otherwise if
a user passes --scp-fw as an option, the "scp-fwu-cfg" option may
get selected, resulting in an incorrectly packaged FIP.
This issue has been be fixed by:
- First searching for an exact match.
- If exact match was not found search for a abbreviated match.
By doing this an incorrect option selection can be avoided.
Change-Id: I22f4e7a683f3df857f5b6f0783bf9b03a64a0bcc Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Neoverse N1 erratum 1868343 is a Cat B erratum, present in older
revisions of the Neoverse N1 processor core. The workaround is to
set a bit in the CPUACTLR_EL1 system register, which delays instruction
fetch after branch misprediction. This workaround will have a small
impact on performance.
Ruari Phipps [Mon, 10 Aug 2020 14:53:45 +0000 (15:53 +0100)]
SPM: Get rid of uint32_t array representation of UUID
UUID's in the device tree files were stored in little endian. So
to keep all entries in these files RFC 4122 compliant, store them in
big endian then convert it to little endian when they are read so they
can be used in the UUID data structure.
Max Shvetsov [Tue, 25 Aug 2020 10:50:18 +0000 (11:50 +0100)]
Fix: fixing coverity issue for SPM Core.
spmd_get_context_by_mpidr was using potentially negative value as an
array index. plat_core_pos_by_mpidr could return -1 on failure which is
utilized by some platforms.
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
Change-Id: I7f8827e77f18da389c9cafdc1fc841aba9f03120
Issue seems to be occurred when 'ROT key' is generated before creating
the platform build folder(for e.g.build/qemu/debug).
Changes are made to fix this issue by adding orderly dependancy of
the platform folder for the 'ROT key' creation which ensures that
platform folder is created before generating 'ROT key'.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I20c82172dde84e4c7f2373c0bd095d353f845d38
This patch: fafd3ec9c assumes that tools must build from
the main makefile folder.
This assumption leads to the error when somebody wants to
build a tool from the tool's folder.
Hence changes are done to provide the default binary name
in the tool's makefile.
Change-Id: Iae570a7f8d322151376b6feb19e739300eecc3fc Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Andre Przywara [Thu, 3 Sep 2020 10:04:39 +0000 (11:04 +0100)]
libc: memset: improve performance by avoiding single byte writes
Currently our memset() implementation is safe, but slow. The main reason
for that seems to be the single byte writes that it issues, which can
show horrible performance, depending on the implementation of the
load/store subsystem.
Improve the algorithm by trying to issue 64-bit writes. As this only
works with aligned pointers, have a head and a tail section which
covers unaligned pointers, and leave the bulk of the work to the middle
section that does use 64-bit writes.
Put through some unit tests, which exercise all combinations of nasty
input parameters (pointers with various alignments, various odd and even
sizes, corner cases of content to write (-1, 256)).
Change-Id: I28ddd3d388cc4989030f1a70447581985368d5bb Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Sandeep Tripathy [Mon, 17 Aug 2020 14:52:13 +0000 (20:22 +0530)]
psci: utility api to invoke stop for other cores
The API can be used to invoke a 'stop_func' callback for all
other cores from any initiating core. Optionally it can also
wait for other cores to power down. There may be various use
of such API by platform. Ex: Platform may use this to power
down all other cores from a crashed core.
Pramod Kumar [Wed, 5 Feb 2020 05:57:57 +0000 (11:27 +0530)]
lib: cpu: Check SCU presence in DSU before accessing DSU registers
The DSU contains system control registers in the SCU and L3 logic to
control the functionality of the cluster. If "DIRECT CONNECT" L3
memory system variant is used, there won't be any L3 cache,
snoop filter, and SCU logic present hence no system control register
will be present. Hence check SCU presence before accessing DSU register
for DSU_936184 errata.
arm_fpga: Add support to populate the CPU nodes in the DTB
At the moment BL31 dynamically discovers the CPU topology of an FPGA
system at runtime, but does not export it to the non-secure world.
Any BL33 user would typically looks at the devicetree to learn about
existing CPUs.
This patch exports a minimum /cpus node in a devicetree to satisfy
the binding. This means that no cpumaps or caches are described.
This could be added later if needed.
An existing /cpus node in the DT will make the code bail out with a
message.
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I589a2b3412411a3660134bdcef3a65e8200e1d7e
Anders Dellien [Sun, 23 Aug 2020 18:32:48 +0000 (19:32 +0100)]
plat/arm: Add dependencies to configuration files
This patch adds dependencies to the generated configuration
files that are included in the FIP. This fixes occasional
build errors that occur when the FIP happens to be built first.
Change-Id: I5a2bf724ba3aee13954403b141f2f19b4fd51d1b Signed-off-by: Anders Dellien <anders.dellien@arm.com>
Add support to export a /cpus node to the device tree.
This patch creates and populates the /cpus node in a device tree
based on the existing topology. It uses the minimum required nodes
and properties to satisfy the binding as specified in
https://www.kernel.org/doc/Documentation/devicetree/bindings/arm/cpus.txt
Signed-off-by: Javier Almansa Sobrino <javier.almansasobrino@arm.com>
Change-Id: I03bf4e9a6427da0a3b8ed013f93d7bc43b5c4df0
spd: trusty: allow clients to retrieve service UUID
This patch implements support for the 64-bit and 32-bit versions of
0xBF00FF01 SMC function ID, as documented by the SMCCC, to allow
non-secure world clients to query SPD's UUID.
In order to service this FID, the Trusty SPD now increases the range
of SMCs that it services. To restrict Trusty from receiving the extra
SMC FIDs, this patch drops any unsupported FID.
Verified with TFTF tests for UID query and internal gtest for Trusty.
anzhou [Tue, 4 Aug 2020 14:05:19 +0000 (22:05 +0800)]
Tegra: common: fixup the bl31 code size to be copied at reset
If the CPU doesn't run from BL31_BASE, the firmware needs to be
copied from load address to BL31_BASE during cold boot. The size
should be the actual size of the code, which is indicated by the
__RELA_END__ linker variable.
This patch updates the copy routine to use this variable as a
result.
anzhou [Wed, 5 Aug 2020 14:34:13 +0000 (22:34 +0800)]
Tegra: common: disable GICC after domain off
The the GIC CPU interface should be disabled after cpu off. The
Tegra power management code should mark the connected core as asleep
as part of the CPU off sequence.
This patch disables the GICC after CPU off as a result.
anzhou [Fri, 26 Jun 2020 07:21:10 +0000 (15:21 +0800)]
Tegra: fixup CNTPS_TVAL_EL1 delay timer reads
The delay_timer driver for Tegra uses the CNTPS_TVAL_EL1 secure, physical,
decrementing timer as the source. The current logic incorrectly marks this
as an incrementing timer, by negating the timer value.
This patch fixes the anomaly and updates the driver to remove this logic.
Tegra: add platform specific 'runtime_setup' handler
Tegra SoCs would like the flexibility to perform chip specific actions
before we complete cold boot. This patch introduces a platform specific
'runtime_setup' handler to provide that flexibility.
The SVE CPU extension library reads the id_aa64pfr0_el1 register to
check if SVE is enabled. Tegra platforms disabled ENABLE_SVE_FOR_NS for
pre-8.2 platforms, but this flag can safely be enabled now that the
library can enable the feature at runtime.
This patch updates the makefile to remove "ENABLE_SVE_FOR_NS = 0"
as a result.
Jimmy Brisson [Tue, 4 Aug 2020 21:27:51 +0000 (16:27 -0500)]
Move static vars into functions in bl1
This reduces the scope of these variables and resolves Misra violations
such as:
bl1/aarch64/bl1_context_mgmt.c:21:[MISRA C-2012 Rule 8.9 (advisory)]
"bl1_cpu_context" should be defined at block scope.
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
Change-Id: I9b0b26395bce07e10e61d10158c67f9c22ecce44
In the case of Juno AArch32, platform security configuration
gets done from both BL2 and SP_MIN(BL32) components when
JUNO_AARCH32_EL3_RUNTIME and RESET_TO_SP_MIN build options
are set.
Fix is provided to avoid Platform security configuration from
SP_MIN when it is already done in BL2.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I702e91dacb4cdd2d10e339ddeaea91289bef3229
plat/arm: Get the base address of nv-counters from device tree
Using the Fconf, register base address of the various nv-counters
(currently, trusted, non-trusted nv-counters) are moved to the
device tree and retrieved during run-time. This feature is
enabled using the build option COT_DESC_IN_DTB.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I236f532e63cea63b179f60892cb406fc05cd5830
dtsi: Update the nv-counter node in the device tree
Created a header file defining the id of the various nv-counters
used in the system.
Also, updated the device tree to add 'id' property for the trusted
and non-trusted nv-counters.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ia41a557f7e56ad4ed536aee11c7a59e078ae07c0
Varun Wadekar [Mon, 26 Aug 2019 17:20:53 +0000 (10:20 -0700)]
Tegra: memctrl: platform setup handler functions
The driver initially contained the setup steps to help Tegra186
and Tegra194 SoCs. In order to support future SoCs and make sure
that the driver remains generic enough, some code should be moved
to SoC.
This patch creates a setup handler for a platform to implement its
initialization sequence.
The stream ID security configuration settings shall be done by the
previous level bootloader. This change removes the same settings
from the Tegra194 platform code as a result.
The stream ID override configuration is saved during System Suspend
as part MB1 bct. This change removes the same support from the Tegra194
platform code as a result.
Varun Wadekar [Wed, 11 Dec 2019 21:22:21 +0000 (13:22 -0800)]
Tegra: debug prints indicating SC7 entry sequence completion
This patch adds prints to display the completion of System Suspend
programming sequence for Tegra platforms. The console needs to
be kept alive until the very end of the System Suspend sequence as
a result.
Tegra194: memctrl: update TZDRAM base at 1MB granularity
The Memory controller expects the TZDRAM base value at 1MB granularity
and the current driver does not respect that limitation. This patch
fixes that anomaly.
David Pu [Fri, 7 Jun 2019 22:30:17 +0000 (15:30 -0700)]
Tegra194: ras: split up RAS error clear SMC call.
In order to make sure SMC call is within 25us, this patch reduces number of RAS
errors accessed to 8 at most for each SMC call and takes a input/output
parameter to specify in progress RAS error record index.
The measured SMC call latency is about 20us under Linux test kernel driver.
Change-Id: Ia1b57c8673e0193dc341a36af0b5c09fb48f965f Signed-off-by: David Pu <dpu@nvidia.com>
Varun Wadekar [Fri, 15 Nov 2019 23:46:14 +0000 (15:46 -0800)]
Tegra194: add memory barriers during DRAM to SysRAM copy
This patch adds memory barriers to the trampoline code copying TZDRAM
contents to SysRAM during exit from System Suspend. These barriers
make sure that all the copies go through before we start executing in
SysRAM.
Anthony Zhou [Wed, 4 Dec 2019 06:58:23 +0000 (14:58 +0800)]
Tegra: sip: add VPR resize enabled check
The Memory Controller provides a control register to check
if the video memory can be resized. The previous bootloader
might have locked this feature, which will be reflected by
this register.
This patch reads the control register before processing
a video memory resize request. An error code, -ENOTSUP,
is returned if the feature is locked.
Change-Id: Ia1d67f7a94aa15c6b18ff5c9b9b952e179596ae3 Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
Anthony Zhou [Wed, 13 Nov 2019 10:36:07 +0000 (18:36 +0800)]
Tegra194: add redundancy checks for MMIO writes
MMIO writes should verify that the writes actually went through.
Read the value back after the write operation, perform assert
if the read back value is not same as the write value.
Change-Id: Id2ceb014116f3aa6a9e86505ca1ae9911470a679 Signed-off-by: Anthony Zhou <anzhou@nvidia.com>
projects / arm-tf.git / log