Remi Pommarel [Thu, 28 Mar 2019 22:34:18 +0000 (23:34 +0100)]
meson/gxl: Add support for SHA256 DMA engine
In order to configure and boot SCP, BL31 has to compute and send
the SHA-256 of the firmware data via scpi. Luckily Amlogic GXL SOC
has a DMA facility that could be used to offload SHA-256
computations. This adds basic support of this hardware SHA-256
engine.
Marek Vasut [Sat, 30 Mar 2019 03:01:41 +0000 (04:01 +0100)]
rcar_gen3: plat: Print DRAM bank size in MiB if below 1 GiB
Print the DRAM bank size in MiB instead of GiB in case the bank size
is smaller than 1 GiB. This prevents printing zeroes on systems with
small DRAM sizes.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Paul Beesley [Fri, 29 Mar 2019 10:14:56 +0000 (10:14 +0000)]
doc: Clarify draft status of SPCI and SPRT specs
These SPM-related specifications are mentioned in the readme and
the change log. Update references to these specs to make it clear
that they are in draft form and are expected to change.
Change-Id: Ia2791c48c371a828246d96f102a402747cd69f96 Signed-off-by: Paul Beesley <paul.beesley@arm.com>
The latest version of GCC are required to use the new features of TF-A.
Suggest to use the latest version available on developer.arm.com instead
of the version specified on the Linaro Release notes.
At the time of writing, GCC 8.2-2019.01 is the latest version available.
Change-Id: Idd5c00749e39ca9dc8b7c5623b5d64356c9ce6e5 Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Paul Beesley [Mon, 25 Mar 2019 16:42:19 +0000 (16:42 +0000)]
doc: Add contents.rst to link to pages
This is the temporary contents page that links
to all other documents (except platform ports).
This page is needed during the
trustedfirmware.org migration, before we have a
Sphinx rendering pipeline set up, because cgit
doesn't offer a good way to view rendered docs
while browsing the tree. We need to have a links
page that can be opened from the cgit 'about'
view.
Change-Id: I3ad87a9fa8a14dc8e371aac7ee473575fed316bf Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Tien Hock, Loh [Fri, 22 Mar 2019 04:54:31 +0000 (12:54 +0800)]
driver: synosys: Fix SD MMC not initializing correctly
dw_params.mmc_dev_type should be assigned before mmc_init, otherwise SDMMC
initialization will fail as the initialization treats the device as EMMC
instead of SD.
Signed-off-by: Tien Hock, Loh <tien.hock.loh@intel.com>
Fixed the below bugs:
1) Bug related to build flag V=1: if the flag was V=0, building with
ROMLIB would fail.
2) Due to a syntax bug in genwrappers.sh, index file entries marked as
"patch" or "reserved" were ignored.
3) Added a prepending hash to constants that genwrappers is generating.
4) Due to broken dependencies, currently the inclusion functionality is
intentionally not utilised. This is why the contents of romlib/jmptbl.i
have been copied to platform specific jmptbl.i files. As a result of the
broken dependencies, when changing the index files, e.g. patching
functions, a clean build is always required. This is a known issue that
will be fixed in the future.
Change-Id: I9d92aa9724e86d8f90fcd3e9f66a27aa3cab7aaa Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
xlat_tables_v2: Revert recent changes to remove recursion
This commit reverts the following commits:
- c54c7fc35842 ("xlat_tables_v2: print xlat tables without recursion")
- db8cac2d986a ("xlat_tables_v2: unmap region without recursion.")
- 0ffe269215bd ("xlat_tables_v2: map region without recursion.")
This was part of PR#1843.
A problem has been detected in one of our test run configurations
involving dynamic mapping of regions and it is blocking the next
release. Until the problem can be solved, it is safer to revert
the changes.
Change-Id: I3d5456e4dbebf291c8b74939c6fb02a912e0903b Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Alexei Fedorov [Wed, 13 Mar 2019 11:05:07 +0000 (11:05 +0000)]
Declare PAuth for Secure world as experimental
Declare ENABLE_PAUTH and CTX_INCLUDE_PAUTH_REGS
build options as experimental.
Pointer Authentication is enabled for Non-secure world
irrespective of the value of these build flags if the
CPU supports it.
The patch also fixes the description of fiptool 'help' command.
Heiko Stuebner [Thu, 7 Mar 2019 07:07:11 +0000 (08:07 +0100)]
rockchip: add an fdt parsing stub for platform param
The Rockchip ATF platform can be entered from both Coreboot and U-Boot.
While Coreboot does submit the list of linked parameter structs as
platform param, upstream u-boot actually always provides a pointer
to a devicetree as parameter.
This results in current ATF not running at all when started from U-Boot.
To fix this, add a stub that checks if the parameter is a fdt so we
can at least boot and not get stuck. Later on we can extend this with
actual parsing of information from the devicetree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Louis Mayencourt [Wed, 13 Mar 2019 17:11:35 +0000 (17:11 +0000)]
fvp: Increase the size of the stack for FVP
When RECLAIM_INIT_CODE is 1, the stack is used to contain the .text.init
section. This is by default enable on FVP. Due to the size increase of
the .text.init section, the stack had to be adjusted contain it.
Change-Id: Ia392341970fb86c0426cf2229b1a7295453e2e32 Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Put Pointer Authentication key value in BSS section
The dummy implementation of the plat_init_apiakey() platform API uses
an internal 128-bit buffer to store the initial key value used for
Pointer Authentication support.
The intent - as stated in the file comments - was for this buffer to
be write-protected by the MMU. Initialization of the buffer would be
performed before enabling the MMU, thus bypassing write protection
checks.
However, the key buffer ended up into its own read-write section by
mistake due to a typo on the section name ('rodata.apiakey' instead of
'.rodata.apiakey', note the leading dot). As a result, the linker
script was not pulling it into the .rodata output section.
One way to address this issue could have been to fix the section
name. However, this approach does not work well for BL1. Being the
first image in the boot flow, it typically is sitting in real ROM
so we don't have the capacity to update the key buffer at any time.
The dummy implementation of plat_init_apiakey() provided at the moment
is just there to demonstrate the Pointer Authentication feature in
action. Proper key management and key generation would have to be a
lot more careful on a production system.
Therefore, the approach chosen here to leave the key buffer in
writable memory but move it to the BSS section. This does mean that
the key buffer could be maliciously updated for intalling unintended
keys on the warm boot path but at the feature is only at an
experimental stage right now, this is deemed acceptable.
This patch applies the new MSR instruction to directly set the
PSTATE.SSBS bit which controls speculative loads. This new instruction
is available at Neoverse N1 core so it's utilised.
Change-Id: Iee18a8b042c90fdb72d2b98f364dcfbb17510728 Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>
Bryan O'Donoghue [Tue, 12 Mar 2019 12:09:51 +0000 (12:09 +0000)]
bl1-smc-handler: Ensure the lower-order 16 bits of SPSR are programmed
A bug recently fixed in bl2/aarch32/bl2_el3_entrypoint.S relates to
programming the lower-order 16 bits of the SPSR to populate into the CPSR
on eret.
The BL1 smc-handler code is identical and has the same shortfall in
programming the SPSR from the platform defined struct
entry_point_info->spsr.
msr spsr, r1 will only update bits f->[31:24] and c->[7:0] respectively. In
order to ensure the 16 lower-order processor mode bits x->[15:8] and
c->[7:0] this patch changes msr spsr, r1 to msr spsr_xc, r1.
This change ensures we capture the x field, which we are interested in and
not the f field which we are not.
Bryan O'Donoghue [Mon, 11 Mar 2019 15:36:07 +0000 (15:36 +0000)]
bl2-el3: Fix exit to bl32 by ensuring a more complete write to SPSR
Prior to entry into BL32 we set the SPSR by way of msr spsr, r1.
This unfortunately only writes the bits f->[31:24] and c->[7:0].
This patch updates the bl2 exit path to write the x->[15:8] and c->[7:0]
fields of the SPSR. For the purposes of initial setup of the SPSR the x and
c fields should be sufficient and importantly will capture the necessary
lower-order control bits that f:c alone do not.
This is important to do to ensure the SPSR is set to the mode the platform
intends prior to performing an eret.
Jacky Bai [Wed, 6 Mar 2019 09:15:06 +0000 (17:15 +0800)]
plat: imx8m: Add the basic support for imx8mm
The i.MX8M Mini is new SOC of the i.MX8M family. it is
focused on delivering the latest and greatest video and
audio experience combining state-of-the-art media-specific
features with high-performance processing while optimized
for lowest power consumption. The i.MX 8M Mini Media Applications
Processor is 14nm FinFET product of the growing i.MX8M family
targeting the consumer & industrial market. It is built in 14LPP
to achieve both high performance and low power consumption
and relies on a powerful fully coherent core complex based on
a quad Cortex-A53 cluster with video and graphics accelerators
Masahisa Kojima [Thu, 7 Mar 2019 02:23:42 +0000 (11:23 +0900)]
plat/arm: mhu: make mhu driver generic
MHU doorbell driver requires arm platform specific
macro "PLAT_CSS_MHU_BASE".
Rename it to "PLAT_MHUV2_BASE", so that platforms other than arm
can use generic MHU doorbell driver.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Masahisa Kojima [Thu, 7 Mar 2019 01:41:54 +0000 (10:41 +0900)]
plat/synquacer: enable SCMI support
Enable the SCMI protocol support in SynQuacer platform.
Aside from power domain, system power and apcore management protocol,
this commit adds the vendor specific protocol(0x80).
This vendor specific protocol is used to get the dram mapping information
from SCP.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Makefile: fix linking with pie and binutils > 2.27
Since binutils 1a9ccd70f9a7[1] TFA will not link when the PIE option is
used:
aarch64-linux-gnu-ld: build/fvp/debug/bl31/bl31.elf: Not enough room
for program headers, try linking with -N
aarch64-linux-gnu-ld: final link failed: Bad value
This issue was also encountered by u-boot[2] and linux powerpc kernel
[3]. The fix is to provide --no-dynamic-linker for the linker. This
tells the linker that PIE does not need loaded program program headers.
projects / arm-tf.git / log