Reference Picture Set lists provide indices of short and long term
reference in DBP array.
Fix Hantro to not do a look up in DBP entries.
Make documentation more clear about it.
Add a 'postprocessed' boolean property to struct hantro_fmt
to signal that a format is produced by the post-processor.
This will allow to introduce the G2 post-processor in a simple way.
When the post-processor hardware block is enabled, the driver
allocates an internal queue of buffers for the decoder enginer,
and uses the vb2 queue for the post-processor engine.
For instance, on a G1 core, the decoder engine produces NV12 buffers
and the post-processor engine can produce YUY2 buffers. The decoder
engine expects motion vectors to be appended to the NV12 buffers,
but this is only required for CODECs that need motion vectors,
such as H.264.
Bit 21 in register 0x24 (slice header info 1) actually represents
negated version of low delay flag. This can be seen in vendor Cedar
library source code. While this flag is not part of the standard, it can
be found in reference HEVC implementation.
The original direct splicing mechanism from Jens required the input to
be a regular file because it was avoiding the special socket case. It
also recognized blkdevs as being close enough to a regular file. But it
forgot about chardevs, which behave the same way and work fine here.
This is an okayish heuristic, but it doesn't totally work. For example,
a few chardevs should be spliceable here. And a few regular files
shouldn't. This patch fixes this by instead checking whether FMODE_LSEEK
is set, which represents decently enough what we need rewinding for when
splicing to internal pipes.
Fixes: 384b281c128a ("[PATCH] splice: add direct fd <-> fd splicing support") Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit f52605560743 ("bpf: Improve the info.func_info and info.func_info_rec_size behavior")
accidently made bpf_prog_ksym_set_name() conservative for bpf subprograms.
Fixed it so instead of "bpf_prog_tag_F" the stack traces print "bpf_prog_tag_full_subprog_name".
Fixes: f52605560743 ("bpf: Improve the info.func_info and info.func_info_rec_size behavior") Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220714211637.17150-1-alexei.starovoitov@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.
Fixes: a7ffacd44428 ("selftests/timers: Add clocksource-switch test from timetest suite") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
BPF map name is limited to BPF_OBJ_NAME_LEN.
A map name is defined as being longer than BPF_OBJ_NAME_LEN,
it will be truncated to BPF_OBJ_NAME_LEN when a userspace program
calls libbpf to create the map. A pinned map also generates a path
in the /sys. If the previous program wanted to reuse the map，
it can not get bpf_map by name, because the name of the map is only
partially the same as the name which get from pinned path.
The syscall information below show that map name "process_pinned_map"
is truncated to "process_pinned_".
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map",
bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory)
This patch check that if the name of pinned map are the same as the
actual name for the first (BPF_OBJ_NAME_LEN - 1),
bpf map still uses the name which is included in bpf object.
current code of __tcp_retransmit_skb only check TCP_SKB_CB(skb)->seq
in send window, and TCP_SKB_CB(skb)->seq_end maybe out of send window.
If receiver has shrunk his window, and skb is out of new window, it
should retransmit a smaller portion of the payload.
In sk_psock_skb_ingress_enqueue function, if the linear area + nr_frags +
frag_list of the SKB has NR_MSG_FRAG_IDS blocks in total, skb_to_sgvec
will return NR_MSG_FRAG_IDS, then msg->sg.end will be set to
NR_MSG_FRAG_IDS, and in addition, (NR_MSG_FRAG_IDS - 1) is set to the last
SG of msg. Recv the msg in sk_msg_recvmsg, when i is (NR_MSG_FRAG_IDS - 1),
the sk_msg_iter_var_next(i) will change i to 0 (not NR_MSG_FRAG_IDS), the
judgment condition "msg_rx->sg.start==msg_rx->sg.end" and
"i != msg_rx->sg.end" can not work.
As a result, the processed msg cannot be deleted from ingress_msg list.
But the length of all the sge of the msg has changed to 0. Then the next
recvmsg syscall will process the msg repeatedly, because the length of sge
is 0, the -EFAULT error is always returned.
Fixes: 38506f4bbc9d ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20220628123616.186950-1-liujian56@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
We should use of_node_put() for the reference 'np' returned by
of_get_child_by_name() which will increase the refcount.
Fixes: 16f019b556d0 ("mt76: add functions for parsing rate power limits from DT") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
mt7921/mt7922 support HE max aggregation subframes 256 for both tx/rx.
Get better throughput then before.
Fixes: 01547a349406 ("mt76: mt7921: fix max aggregation subframes setting") Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes `kms_cursor_crc --run-subtest cursor-offscreen`.. when the cursor
moves offscreen the plane becomes non-visible, so we need to skip over
it in crtc atomic test and mixer setup.
Someone on IRC once asked an innocent enough sounding question: Why
with xf86-video-modesetting is es2gears limited at 120fps.
So I broke out the perfetto tracing mesa MR and took a look. It turns
out the problem was drm_atomic_helper_dirtyfb(), which would end up
waiting for vblank.. es2gears would rapidly push two frames to Xorg,
which would blit them to screen and in idle hook (I assume) call the
DIRTYFB ioctl. Which in turn would do an atomic update to flush the
dirty rects, which would stall until the next vblank. And then the
whole process would repeat.
But this is a bit silly, we only need dirtyfb for command mode DSI
panels. So track in plane state whether dirtyfb is required, and
track in the fb how many attached planes require dirtyfb so that we
can skip it when not required. (Note, mdp4 does not actually have
cmd mode support.)
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220223191118.881321-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The mdp_ipi_comm structure defines a command that is either
PROCESS (start processing) or DEINIT (destroy instance); we
are using this one to send PROCESS or DEINIT commands from Linux
to an MDP instance through a VPU write but, while the first wants
us to stay 4-bytes aligned, the VPU instead requires an 8-bytes
data alignment.
Keeping in mind that these commands are executed immediately
after sending them (hence not chained with others before the
VPU/MDP "actually" start executing), it is fine to simply add
a padding of 4 bytes to this structure: this keeps the same
performance as before, as we're still stack-allocating it,
while avoiding hackery inside of mtk-vpu to ensure alignment
bringing a definitely bigger performance impact.
Fixes: 85f33f13dc79 ("[media] media: Add Mediatek MDP Driver") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When kunpeng920 encryption driver is used to deencrypt and decrypt
packets during the softirq, it is not allowed to use mutex lock. The
kernel will report the following error:
And the calltrace of task that actually caused kernel hungs as follows:
__switch_to+124
__schedule+548
schedule+72
schedule_timeout+348
__down_common+188
__down+24
down+104
hinic_get_stats64+44 [hinic]
dev_get_stats+92
bond_get_stats+172 [bonding]
dev_get_stats+92
dev_seq_printf_stats+60
dev_seq_show+24
seq_read_iter+964
seq_read+220
proc_reg_read+164
vfs_read+172
ksys_read+108
__arm64_sys_read+28
el0_svc_common+132
do_el0_svc+40
el0_svc+24
el0_sync_handler+164
el0_sync+324
When getting device stats from bond, kernel will call bond_get_stats().
It first holds the spinlock bond->stats_lock, and then call
hinic_get_stats64() to collect hinic device's stats.
However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to
protect its critical section, which may schedule current task out.
And if system is under high pressure, the task cannot be woken up
immediately, which eventually triggers kernel hung panic.
Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local
variable in hinic_get_stats64(), there is nothing need to be protected
by lock, so just removing down()/up() is ok.
Fixes: 38a86f061226 ("net-next/hinic: Add ethtool and stats") Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Function hinic_get_stats64() will do two operations:
1. reads stats from every hinic_rxq/txq and accumulates them
2. calls hinic_rxq/txq_clean_stats() to clean every rxq/txq's stats
For hinic_get_stats64(), it could get right data, because it sums all
data to nic_dev->rx_stats/tx_stats.
But it is wrong for get_drv_queue_stats(), this function will read
hinic_rxq's stats, which have been cleared to zero by hinic_get_stats64().
I have observed hinic's cleanup operation by using such command:
> watch -n 1 "cat ethtool -S eth4 | tail -40"
Result after a few seconds:
...
rxq7_pkts: 0
rxq7_bytes: 0
rxq7_errors: 0
rxq7_csum_errors: 0
rxq7_other_errors: 0
...
rxq9_pkts: 2
rxq9_bytes: 132
rxq9_errors: 0
rxq9_csum_errors: 0
rxq9_other_errors: 0
...
rxq11_pkts: 1
rxq11_bytes: 170
rxq11_errors: 0
rxq11_csum_errors: 0
rxq11_other_errors: 0
To solve this problem, we just keep every queue's total stats in their own
queue (aka hinic_{rxq|txq}), and simply sum all per-queue stats every time
calling hinic_get_stats64().
With that solution, there is no need to clean per-queue stats now,
and there is no need to maintain global hinic_dev.{tx|rx}_stats, too.
Fixes: 38a86f061226 ("net-next/hinic: Add ethtool and stats") Signed-off-by: Qiao Ma <mqaio@linux.alibaba.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
'vlan_bitmap' is a bitmap and is used as such. So allocate it with
devm_bitmap_zalloc() and its explicit bit size (i.e. VLAN_N_VID).
This avoids the need of the VLAN_BITMAP_SIZE macro which:
- needlessly has a 'nic_dev' parameter
- should be "long" (and not byte) aligned, so that the bitmap semantic
is respected
This is in fact not an issue because VLAN_N_VID is 4096 at the time
being, but devm_bitmap_zalloc() is less verbose and easier to understand.
The next call to sii8620_burst_get_tx_buf will result in off-by-one
When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same
thing happens in sii8620_burst_get_rx_buf.
This patch also change tx_count and tx_buf to rx_count and rx_buf in
sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and
use rx_buf.
Fixes: 0601b1778ca0 ("drm/bridge/sii8620: add support for burst eMSC transmissions") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It's possible for users to try to duplicate the CRTC state even when the
state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other
users of __drm_atomic_helper_crtc_duplicate_state()) already guard this
with a WARN_ON() instead of crashing, so let's do that here too.
Currently, xsk_socket__delete frees BPF resources regardless of ctx
refcount. Xdpxceiver has a test to verify whether underlying BPF
resources would not be wiped out after closing XSK socket that was
bound to interface with other active sockets. From library's xsk part
perspective it also means that the internal xsk context is shared and
its refcount is bumped accordingly.
After a switch to loading XDP prog based on previously opened XSK
socket, mentioned xdpxceiver test fails with:
not ok 16 [xdpxceiver.c:swap_xsk_resources:1334]: ERROR: 9/"Bad file descriptor
which means that in swap_xsk_resources(), xsk_socket__delete() released
xskmap which in turn caused a failure of xsk_socket__update_xskmap().
To fix this, when deleting socket, decrement ctx refcount before
releasing BPF resources and do so only when refcount dropped to 0 which
means there are no more active sockets for this ctx so BPF resources can
be freed safely.
Fixes: 3c545a59a8a2 ("libbpf: Support shared umems between queues and devices") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220629143458.934337-5-maciej.fijalkowski@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_exit':
ghash-ce-glue.c:(.exit.text+0x24): undefined reference to 'crypto_unregister_aead'
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_init':
ghash-ce-glue.c:(.init.text+0x34): undefined reference to 'crypto_register_aead'
Fixes: 56bb7497f239 ("crypto: arm64/gcm - implement native driver using v8 Crypto Extensions") Signed-off-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Increase the number of post-sync blanking lines on odd fields instead of
decreasing it on even fields. This makes the total number of lines
properly match the modelines.
Additionally fix the value of PV_VCONTROL_ODD_DELAY, which did not take
pixels_per_clock into account, causing some displays to invert the
fields when driven by bcm2711.
Fixes: 5d915add54a1 ("drm/vc4: Fix support for interlaced modes on HDMI.") Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Link: https://lore.kernel.org/r/20220613144800.326124-31-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
The HDMI block can repeat pixels for double clocked modes,
and the firmware is now configuring the block to do this as
the PV is doing it incorrectly when at 2pixels/clock.
If the kernel doesn't reset it then we end up with strange
modes.
Reset MISC_CONTROL.
Fixes: e40b36e7391d ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-22-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
Prior to commit ad85ea22c7d4 ("drm/vc4: hdmi: Convert to gpiod"), in the
detect hook, if we had an HPD GPIO we would only rely on it and return
whatever state it was in.
However, that commit changed that by mistake to only consider the case
where we have a GPIO and it returns a logical high, and would fall back
to the other methods otherwise.
Since we can read the EDIDs when the HPD signal is low on some displays,
we changed the detection status from disconnected to connected, and we
would ignore an HPD pulse.
Fixes: ad85ea22c7d4 ("drm/vc4: hdmi: Convert to gpiod") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-3-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
vc4_dsi_encoder_disable is partially an open coded version of
drm_bridge_chain_disable, but it missed a termination condition
in the loop for ->disable which meant that no post_disable
calls were made.
DSI0 seemingly had very little or no testing as a load of
the register mappings were incorrect/missing, so host
transfers always timed out due to enabling/checking incorrect
bits in the interrupt enable and status registers.
Fixes: a692878e328c ("drm/vc4: Add DSI driver") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-16-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
vc4_dsi was registering both dsi0 and dsi1 as VC4_ENCODER_TYPE_DSI1
which seemed to work OK for a single DSI display, but fails
if there are two DSI displays connected.
Update to register the correct type.
Fixes: a692878e328c ("drm/vc4: Add DSI driver") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-15-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
For slightly unknown reasons, dsi0 takes a different pixel format
to dsi1, and that has to be set in the pixel valve.
Amend the setup accordingly.
Fixes: a4929aa7a5a7 ("drm/vc4: Add support for feeding DSI encoders from the pixel valve.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-14-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
The divider calculations tried to find the divider just faster than the
clock requested. However if it required a divider of 7 then the for loop
aborted without handling the "error" case, and could end up with a clock
lower than requested.
The integer divider from parent PLL to DSI clock is also capable of
going up to /255, not just /7 that the driver was trying. This allows
for slower link frequencies on the DSI bus where the resolution permits.
Correct the loop so that we always have a clock greater than requested,
and covering the whole range of dividers.
Fixes: 98772f8ef2f2 ("drm/vc4: Adjust modes in DSI to work around the integer PLL divider.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-13-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
Display drivers so far need to have a lot of boilerplate to first
retrieve either the panel or bridge that they are connected to using
drm_of_find_panel_or_bridge(), and then either deal with each with ad-hoc
functions or create a drm panel bridge through drm_panel_bridge_add.
In order to reduce the boilerplate and hopefully create a path of least
resistance towards using the DRM panel bridge layer, let's create the
function devm_drm_of_get_bridge() to reduce that boilerplate.
The current plane margin calculation code clips the right and bottom
edges of the range based using the left and top margins.
This is obviously wrong, so let's fix it.
Fixes: 188f608deb8f ("drm/vc4: Take margin setup into account when updating planes") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-6-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is little harm in ignoring fractional coordinates
(they just get truncated).
Without this:
modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24
is rejected. We have the same issue in Kodi when trying to
use zoom options on video.
Note: even if all coordinates are fully integer. e.g.
src:[0,0,1920,1080] dest:[-10,-10,1940,1100]
it will still get rejected as drm_atomic_helper_check_plane_state
uses drm_rect_clip_scaled which transforms this to fractional src coords
Fixes: 91c5f61694f7 ("drm/vc4: Add support for scaling of display planes.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Link: https://lore.kernel.org/r/20220613144800.326124-5-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org>
video_device_alloc() allocates memory for vdev,
when video_register_device() fails, it doesn't release the memory and
leads to memory leak, call video_device_release() to fix this.
Fixes: 4013ca76ea36 ("[media] media: Support Intersil/Techwell TW686x-based video capture cards") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Error return values are supposed to be negative in hdpvr_read. Most
error returns are currently handled via an unsigned integer "ret". When
setting a negative error value to "ret", the value actually becomes a
large positive value, because "ret" is unsigned. Later on, the "ret"
value is returned. But as ssize_t is a 64-bit signed number, the error
return value stays a large positive integer instead of a negative
integer. This can cause an error value to be interpreted as the read
size, which can cause a buffer overread for applications relying on the
returned size.
Fixes: 0db7fdbfe2fe ("V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
As mipi_dsi_driver_register could return error if fails,
it should be better to check the return value and return error
if fails.
Moreover, if i2c_add_driver fails, mipi_dsi_driver_register
should be reverted.
On shutdown, each CCP device instance performs shutdown processing.
However, __sev_platform_shutdown_locked() uses the controlling psp
structure to obtain the pointer to the sev_device structure. However,
during driver initialization, it is possible that an error can be received
from the firmware that results in the sev_data pointer being cleared from
the controlling psp structure. The __sev_platform_shutdown_locked()
function does not check for this situation and will segfault.
While not common, this scenario should be accounted for. Add a check for a
NULL sev_device structure before attempting to use it.
Fixes: 9ad48cb6c76c ("crypto: ccp - shutdown SEV firmware on kexec") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The prototype of .features is netdev_features_t, it should use
NETIF_F_LLTX and NETIF_F_HW_VLAN_STAG_TX, not NETIF_F_LLTX_BIT
and NETIF_F_HW_VLAN_STAG_TX_BIT.
The RCU priority boosting can fail in two situations:
1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs
is higher than those brought online at boot, then torture_onoff() may
later bring up CPUs that weren't online on boot. Now since rcutorture
initialization only boosts the ksoftirqds of the CPUs that have been
set online on boot, the CPUs later set online by torture_onoff won't
benefit from the boost, making RCU priority boosting fail.
2) The ksoftirqd kthreads are boosted after the creation of
rcu_torture_boost() kthreads, which opens a window large enough for these
rcu_torture_boost() kthreads to wait (despite running at FIFO priority)
for ksoftirqds that are still running at SCHED_NORMAL priority.
Currently, in CONFIG_RCU_BOOST kernels, if the rcu_torture_init()
function's call to cpuhp_setup_state() fails, rcu_torture_cleanup()
gamely passes nonsense to cpuhp_remove_state(). This results in
strange and misleading splats. This commit therefore ensures that if
the rcu_torture_init() function's call to cpuhp_setup_state() fails,
rcu_torture_cleanup() avoids invoking cpuhp_remove_state().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running rcutorture as a module, any rcu_torture_init() issues will be
reflected in the error code from modprobe or insmod, as the case may be.
However, these error codes are not available when running rcutorture
built-in, for example, when using the kvm.sh script. This commit
therefore adds WARN_ON_ONCE() to allow distinguishing rcu_torture_init()
errors when running rcutorture built-in.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
radeon is MIT. This were incorrectly changed in
commit 4518740dfae2 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
and
commit 34602d9d9ac6 (".gitignore: add SPDX License Identifier")
and:
commit af50a7e88245 ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Fixes: 34602d9d9ac6 (".gitignore: add SPDX License Identifier") Fixes: af50a7e88245 ("treewide: Add SPDX license identifier - Makefile/Kconfig") Fixes: 4518740dfae2 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2053 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As a result of the execution of the inner while loop, the value
of 'idx' can be equal to LINK_QUAL_MAX_RETRY_NUM. However, this
is not checked after the loop and 'idx' is used to write the
LINK_QUAL_MAX_RETRY_NUM size array 'lq_cmd->rs_table[idx]' below
in the outer loop.
The fix is to check the new value of 'idx' inside the nested loop,
and break both loops if index equals the size. Checking it at the
start is now pointless, so let's remove it.
Detected using the static analysis tool - Svace.
Fixes: 92be5c71117b ("iwlwifi: split the drivers for agn and legacy devices 3945/4965") Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220608171614.28891-1-aleksei.kodanev@bell-sw.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to not add fancy protection for drv_priv we can move
htc_handle->drv_priv initialization at the end of the
ath9k_htc_probe_device() and add helper macro to make
all *_STAT_* macros NULL safe, since syzbot has reported related NULL
deref in that macros [1]
The hardware can support any image size WxH,
with arbitrary W (image width) and H (image height) dimensions.
Align upwards buffer size for both encoder and decoder.
and leave the picture resolution unchanged.
For decoder, the risk of memory out of bounds can be avoided.
For both encoder and decoder, the driver will lift the limitation of
resolution alignment.
For example, the decoder can support jpeg whose resolution is 227x149
the encoder can support nv12 1080P, won't change it to 1920x1072.
Fixes: d07d57ca19d16 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.
The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.
V4L2_PIX_FMT_NV12 requires num_planes equals to 1,
V4L2_PIX_FMT_NV12M requires num_planes equals to 2.
and mxc-jpeg supports 2 planes for nv12,
so we should use 4L2_PIX_FMT_NV12M instead of V4L2_PIX_FMT_NV12,
otherwise it will confuses gstreamer and prevent encoding and decoding.
Save some power by disabling/enabling the jpeg clocks with
every stream stop/start.
Do not use DL_FLAG_RPM_ACTIVE in mxc_jpeg_attach_pm_domains,
to ensure power domains are off after probe.
There is a hardware bug that it will load
the first 128 bytes of configuration data twice,
it will led to some configure error.
so shift the configuration data 128 bytes,
and make the first 128 bytes all zero,
then hardware will load the 128 zero twice,
and ignore them as garbage.
then the configuration data can be loaded correctly
the register CAST_NOMFRSIZE_LO should be equal to CAST_STATUS16
the register CAST_NOMFRSIZE_HI should be equal to CAST_STATUS17
the register CAST_OFBSIZE_LO should be equal to CAST_STATUS18
the register CAST_OFBSIZE_HI should be equal to CAST_STATUS19
We got the following warning when booting the kernel:
[ 3.243674] INFO: trying to register non-static key.
[ 3.243922] The code is fine but needs lockdep annotation, or maybe
[ 3.244230] you didn't initialize this object before use?
[ 3.245642] Call Trace:
[ 3.247836] lock_acquire+0xff/0x2d0
[ 3.248727] tw686x_audio_irq+0x1a5/0xcc0 [tw686x]
[ 3.249211] tw686x_irq+0x1f9/0x480 [tw686x]
The lock 'vc->qlock' will be initialized in tw686x_video_init(), but the
driver registers the irq before calling the tw686x_video_init(), and we
got the warning.
Fix this by registering the irq at the end of probe
Fixes: 4013ca76ea36 ("[media] media: Support Intersil/Techwell TW686x-based video capture cards") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch is similar to 3b204db75b63 ("can: netlink: allow
configuring of fixed bit rates without need for do_set_bittiming
callback") but for data bit rates instead of bit rates.
Usually CAN devices support configurable data bit rates. The limits
are defined by struct can_priv::data_bittiming_const. Another way is
to implement the struct can_priv::do_set_data_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::data_bittiming_const or struct
can_priv::do_set_data_bittiming is implemented.
In commit 405abb0e0c7b ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::data_bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_data_bittiming
callback on devices with fixed data bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220613143633.4151884-1-mkl@pengutronix.de Fixes: 405abb0e0c7b ("can: dev: add CAN interface API for fixed bitrates") Acked-by: Max Staudt <max@enpas.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Usually CAN devices support configurable bit rates. The limits are
defined by struct can_priv::bittiming_const. Another way is to
implement the struct can_priv::do_set_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::bittiming_const or struct
can_priv::do_set_bittiming is implemented.
In commit 405abb0e0c7b ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_bittiming
callback on devices with fixed bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220611144248.3924903-1-mkl@pengutronix.de Fixes: 405abb0e0c7b ("can: dev: add CAN interface API for fixed bitrates") Reported-by: Max Staudt <max@enpas.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If sk->sk_forward_alloc is 150000, and we need to schedule 150001 bytes,
we want to allocate 1 byte more (rounded up to one page),
instead of 150001 :/
Commit 6b4be4d3a70b ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.
In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.
Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.
Tested with adv7533 and stm32mp157f.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Fixes: 6b4be4d3a70b ("drm: adv7511: Add support for i2c_new_secondary_device") Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220607213144.427177-1-antonio.borneo@foss.st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Since drm_prime_pages_to_sg() function return error pointers.
The drm_gem_shmem_get_sg_table() function returns error pointers too.
Using IS_ERR() to check the return value to fix this.
Change all GEM SHMEM object functions that receive a GEM object
of type struct drm_gem_object to expect an object of type
struct drm_gem_shmem_object instead.
This change reduces the number of upcasts from struct drm_gem_object
by moving them into callers. The C compiler can now verify that the
GEM SHMEM functions are called with the correct type.
For consistency, the patch also renames drm_gem_shmem_free_object to
drm_gem_shmem_free. It further updates documentation for a number of
functions.
v3:
* fix docs for drm_gem_shmem_object_free()
v2:
* mention _object_ callbacks in docs (Daniel)
Wrap GEM SHMEM functions for struct drm_gem_object_funcs and update
all callers. This will allow for an update of the public interfaces
of the GEM SHMEM helper library.
v2:
* fix docs for drm_gem_shmem_object_print_info()
'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset()
and it will lead to a NULL dereference by a lately use of it
(i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check.
NPCM can support up to 10 own slave addresses. In practice, only one
address is actually being used. In order to access addresses 2 and above,
need to switch register banks. The switch needs spinlock.
To avoid using spinlock for this useless feature removed support of SA >=
2. Also fix returned slave event enum.
Remove some comment since the bank selection is not required. The bank
selection is not required since the supported slave addresses are reduced.
Fixes: 58fafb9526b2 ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During device remove care needs to be taken that no work is pending
before it removes the underlying DRM bridge etc, but this can be done on
the specific work rather than waiting for the flush of the system-wide
workqueue.
Fixes: 50555d0f70e5 ("drm/bridge/lontium-lt9611uxc: move HPD notification out of IRQ handler") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220601233818.1877963-1-bjorn.andersson@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 14d402143ac8 ("drm/meson: split out encoder from meson_dw_hdmi") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601033927.47814-3-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.
The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
In the dsi_enable function, mtk_dsi_rxtx_control is to
pull up the MIPI signal operation. Before dsi_disable,
MIPI should also be pulled down by writing a register
instead of disabling dsi.
If disable dsi without pulling the mipi signal low, the value of
the register will still maintain the setting of the mipi signal being
pulled high.
After resume, even if the mipi signal is not pulled high, it will still
be in the high state.
In order to match the changes of "Use the drm_panel_bridge API",
the poweron/poweroff of dsi is extracted from enable/disable and
defined as new funcs (atomic_pre_enable/atomic_post_disable).
Since dsi_poweron is moved from dsi_enable to pre_enable function, in
order to avoid poweron failure, the operation of dsi register fails to
cause bus hang. Therefore, the protection mechanism is added to the
dsi_enable function.
Fixes: 391bb3ed9f63 ("drm/mediatek: mtk_dsi: Use the drm_panel_bridge API") Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1653012007-11854-3-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / kernel.git / log