Michal Simek [Thu, 4 Aug 2022 07:18:06 +0000 (09:18 +0200)]
fix(zynqmp): move debug bl31 based address back to OCM
The commit 389594dfa7e6 ("fix(zynqmp): move bl31 with DEBUG=1 back to OCM")
tried to move address to OCM but address was actually out of OCM and likely
it was typo. Correct default address should be 0xfffe5000. If TF-A size is
bigger please select location DDR which should be fine for DEBUG cases.
Reported-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Michal Simek <michal.simek@amd.com>
Change-Id: I055f3a59cdca527f6029fcc2a19d76be35924d24
Tanmay Shah [Fri, 26 Aug 2022 22:06:00 +0000 (15:06 -0700)]
feat(versal): add infrastructure to handle multiple interrupts
Only one hardcode interrupt handler is supported as of now.
This is IPI interrupt between APU and PMC processor.
This patch adds infrastructure to register multiple interrupt
handlers. This infrastructure was used and tested for two
interrupts and so, interrupt id and handler container size is
2 which is defined by MAX_INTR_EL3. Interrupt id is not used
as container index due to size constraints. User is expected to
adjust MAX_INTR_EL3 based on how many interrupts are handled in
TF-A
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Change-Id: Id49d94f6773fbb6874ccf89c0d12572efc7e678e
Tanmay Shah [Fri, 26 Aug 2022 22:13:48 +0000 (15:13 -0700)]
fix(versal): add SGI register call version check
PM_FEATURE_CHECK is supported only for platform
management API. PM_LOAD_PDI command is not intended
for platform management. This patch removes version
check of PM_LOAD_PDI and adds version check of command
that is used for SGI registartion.
Signed-off-by: Tanmay Shah <tanmay.shah@xilinx.com>
Change-Id: I353163109b639acab73120f405a811770e8831a0
This patch changes the definition of image_info_t to follow the TF-A
coding style documented at
https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-style.html
Max Yu [Thu, 8 Sep 2022 23:21:21 +0000 (23:21 +0000)]
docs(porting-guide): correct typo of "bits" to "bytes"
The CACHE_WRITEBACK_GRANULE is documented to be in bits, but
specifying the value in bits broke a build. Further investigation
suggests that the value should in fact be in bytes. See
https://github.com/ARM-software/arm-trusted-firmware/blob/master/include/arch/aarch64/
smccc_helpers.h#L101
and
https://gcc.gnu.org/onlinedocs/gcc-12.2.0/gcc/Common-Type-Attributes.html
Change-Id: I9a2b2fbe18d5a58a8f9aeb2726a0623f3484c88e Signed-off-by: Max Yu <maxlyu@google.com>
Akram Ahmad [Tue, 6 Sep 2022 10:23:25 +0000 (11:23 +0100)]
fix(cpus): workaround for Cortex-A78C erratum 2376749
Cortex-A78C erratum 2376749 is a Cat B erratum that applies
to revisions r0p1 and r0p2 of the A78C and is currently open.
The workaround is to set CPUACTLR2_EL1[0] to 1 to force
PLDW/PFRM ST to behave like PLD/PRFM LD and not cause
invalidations to other PE caches.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2004089/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: I3b29f4b7f167bf499d5d11ffef91a94861bd1383
Renesas platform does not support crypto, but mbedtls_common.mk
is still included in its makefile. Therefore, this inclusion
was removed to avoid un-necessary compilation of mbedTLS source.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: Ib6978255e39a7f5d5013952841930ae68b12c318
When putting FIP binary in eMMC boot partition (with STM32MP_EMMC_BOOT),
the FIP max size should be precised. If it is not, an assert fails in
io_block driver, as cur->size will be zero.
For this length, we then use the size of the eMMC boot partition minus
STM32MP_EMMC_BOOT_FIP_OFFSET.
The boot partition size of an eMMC is given in ext_csd register, at
offset 226 (BOOT_SIZE_MULT), which has to be multiplied by 128kB.
Add a helper function mmc_boot_part_size() to get this eMMC boot
partition size.
Merge changes I366740a9,I533abdd6,I6aa3b6dc into integration
* changes:
fix(n1sdp): mapping Run-time UART to IOFPGA UART0
fix(n1sdp): add numa node id for pcie controllers
fix(n1sdp): replace non-inclusive terms from dts file
Merge changes from topic "st-nand-updates" into integration
* changes:
feat(stm32mp1): allow to override MTD base offset
feat(stm32mp1): manage second NAND OTP on STM32MP13
feat(stm32mp1): add define for external scratch buffer for nand devices
feat(mtd): add platform function to allow using external buffer
feat(libc): introduce __maybe_unused
Merge changes from topic "mt8188" into integration
* changes:
feat(mt8188): add pinctrl support
feat(mt8188): add RTC support
feat(mt8188): add pmic and pwrap support
refator(mediatek): move pmic.[c|h] to common folder
refator(mediatek): move common definitions of pmic wrap to common folder
feat(mt8188): add IOMMU enable control in SiP service
feat(mt8188): add display port control in SiP service
fix(mediatek): use uppercase for definition
feat(mediatek): move dp drivers to common folder
feat(mediatek): move mtk_cirq.c drivers to cirq folder
feat(mt8188): initialize GIC
feat(mt8188): initialize systimer
feat(mt8188): initialize platform for MediaTek MT8188
refator(mediatek): remove unused files
refator(mediatek): move drivers folder in common to plat/mediatek
feat(mediatek): support coreboot BL31 loading
Himanshu Sharma [Mon, 20 Jun 2022 06:06:34 +0000 (06:06 +0000)]
fix(n1sdp): mapping Run-time UART to IOFPGA UART0
Currently the Run-time UART is mapped to AP UART1 which is internally
routed to MCP UART1, so unsharing it from AP UART1 and mapping it to
IOFPGA UART0 for exclusiveness among the usage of the UARTs.
sahil [Sat, 18 Jun 2022 09:03:45 +0000 (14:33 +0530)]
fix(n1sdp): add numa node id for pcie controllers
If not mentioned explicitly, numa-node-id for pcie_ctlr
is assigned as unknown. With this patch pcie_ctlr and
ccix_pcie_ctlr are assigned numa-node-id=0 and
pcie_secondary_ctlr is assigned numa-node-id=1.
Akram Ahmad [Thu, 21 Jul 2022 13:01:33 +0000 (14:01 +0100)]
fix(errata): workaround for Cortex-A510 erratum 2347730
Cortex-A510 erratum 2347730 is a Cat B erratum that affects
revisions r0p0, r0p1, r0p2, r0p3, r1p0 and r1p1. It is
fixed in r1p2. The workaround is to set CPUACTLR_EL1[17]
to 1, which will disable specific microarchitectural clock
gating behaviour.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1873351/latest
https://developer.arm.com/documentation/SDEN1873361/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: I115386284c2d91bd61515142f971e2e72de43e68
Jorge Troncoso [Mon, 29 Aug 2022 22:58:07 +0000 (15:58 -0700)]
chore: use tabs for indentation
This patch changes definitions of bl2_mem_params_descs to follow the
TF-A coding style documented at
https://trustedfirmware-a.readthedocs.io/en/latest/process/coding-style.html
Hari Nagalla [Mon, 22 Aug 2022 19:04:52 +0000 (14:04 -0500)]
feat(ti-k3): add support for J784S4 SoCs
The J784S4 SoC has two quad Cortex-A72 core clusters. This is the first
SoC in the K3 family with Quad cores in a A-72 cluster. So, a new board
configuration is introduced to support quad core clusters on the J784S4
SoC of the K3 family of devices.
See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Change-Id: I0ed1f14ab32a56ae06e3df3161ace4597d14a48d
Currently, when SPMC at S-EL2 is used, we cannot use the RAS framework
to handle Group 0 interrupts. This is required on platforms where first
level of triaging needs to occur at EL3, before forwarding RAS handling
to a secure partition running atop an SPMC (hafnium).
The RAS framework depends on EHF and EHF registers for Group 0
interrupts to be trapped to EL3 when execution is both in secure world
and normal world. However, an FF-A compliant SPMC requires secure
interrupts to be trapped by the SPMC when execution is in S-EL0/S-EL1.
Consequently, the SPMC (hafnium) is incompatible with EHF, since it is
not re-entrant, and a Group 0 interrupt trapped to EL3 when execution is
in secure world, cannot be forwarded to an SP running atop SPMC.
This patch changes EHF to only register for Group 0 interrupts to be
trapped to EL3 when execution is in normal world and also makes it a
valid routing model to do so, when EL3_EXCEPTION_HANDLING is set (when
enabling the RAS framework).
Leon Chen [Sun, 26 Jun 2022 13:50:32 +0000 (21:50 +0800)]
feat(mediatek): implement generic platform port
Implement mandatory platform port functions. Receive
boot arguments from bl2, populate bl33 and bl32 image
entry structs, call each MTK initcall levels
in these mandatory platform port functions.
After bl31_main exit and handover to 2nd boot loader,
mtk bl33 issues SMC and traps to TF-A to execute boot_to_kernel
and then handover to Linux kernel.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: I8d5a3511668fc749c4c71edf1ac700002cb5a9c8
Leon Chen [Wed, 8 Jun 2022 02:49:24 +0000 (10:49 +0800)]
refactor(mediatek): smc registration services
To modularize SMC handler, provide macro function in mtk_sip_svc.h.
Drivers register SMC name with value in mtk_sip_def.h, and bind the SMC
handler with the SMC ID by calling DECLARE_SMC_HANDLER macro.
MTK_SIP_SMC_FROM_BL33_TABLE expand the SMC table as switch-case table
statically. DECLARE_SMC_HANDLER wrap SMC handlers with a structure and
put in a section.
During cold boot initialization, in MTK_EARLY_PLAT_INIT level parse the
section to assign each handler with an index. Each SMC request can be
identified with switch-case and take the index to call into
corresponding SMC handler.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: I03da212c786de0ec0ea646ba906065ecfcd82571
Leverage pubsub event framework to customize vendor's
event for better software modularization instead of adding
call entries in abstraction layer for customized platform function
with wrap-up define.
Signed-off-by: Leon Chen <leon.chen@mediatek.com>
Change-Id: I48be2303c45f759776fa2baa1c21130c1a8f0fa3
Lionel Debieve [Wed, 13 Jan 2021 06:59:59 +0000 (07:59 +0100)]
feat(stm32mp1): allow to override MTD base offset
Add an external parameter STM32MP_FORCE_MTD_START_OFFSET that allows to
override the default FIP offset used to read the first programmed image.
It can be used for NOR, RAW_NAND or SPI_NAND boot device.
Yann Gautier [Wed, 18 Aug 2021 13:03:40 +0000 (15:03 +0200)]
feat(stm32mp1): manage second NAND OTP on STM32MP13
On STM32MP13, 2 OTP fuses can be used to configure NAND devices.
By default OTP CFG9 is used for sNAND. A new OTP (CFG10) is used
to configure raw NAND. Thanks to bit 0 of CFG10 OTP, this default
configuration can be switched.
For sNAND on STM32MP13, the NAND_PARAM_STORED_IN_OTP is not used.
The sNAND parameters have to be taken from OTP bits.
feat(stm32mp1): add define for external scratch buffer for nand devices
Override the default platform function to use an external buffer
on STM32MP13 platform.
It allows to use a temporary buffer located at the SRAM1 memory end.
For peripheral where both status and secure-status are set to okay,
the function fdt_get_status() returns the same status (DT_SHARED) if
secure-status property is omitted. This secure-status property can then
be removed in boards DT files for iwdg nodes.
Johann Neuhauser [Wed, 13 Jul 2022 10:04:21 +0000 (12:04 +0200)]
feat(stm32mp15-fdts): add Avenger96 board with STM32MP157A DHCOR SoM
This should replace the stm32mp157a-avenger96.dts with the new device
tree files split into the STM32MP15 DHCOR SoM definition and the
Avenger96 baseboard like it's done in Linux and U-Boot.
Differences to stm32mp157a-avenger96.dts:
- Enable sdmmc2 for booting from eMMC
- improved clock settings like in U-Boot commit b6055945
"ARM: dts: stm32: Adjust PLL4 settings on AV96 again"
- improved DDR settings for DHSOMs like in U-Boot commit 92ca0f74
"ARM: dts: stm32: Synchronize DDR setttings on DH SoMs"
TF-A with this new dts(i) files on this board was fully tested with
the latest OP-TEE developer setup.
Change-Id: I85ce8eca7747965af3555fc19fd7b192dc3e5740 Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Olivier Deprez [Thu, 25 Aug 2022 14:28:09 +0000 (16:28 +0200)]
Merge changes from topic "ffa_el3_spmc" into integration
* changes:
feat(tsp): enable test cases for EL3 SPMC
feat(tsp): increase stack size for tsp
feat(tsp): add ffa_helpers to enable more FF-A functionality
Marc Bonnici [Thu, 23 Dec 2021 20:14:34 +0000 (20:14 +0000)]
feat(tsp): enable test cases for EL3 SPMC
Introduce initial test cases to the TSP which are
designed to be exercised by the FF-A Test Driver
in the Normal World. These have been designed to
test basic functionality of the EL3 SPMC.
These tests currently ensure the following functionality:
- Partition discovery.
- Direct messaging.
- Communication with a Logical SP.
- Memory Sharing and Lending ABIs
- Sharing of contiguous and non-contiguous memory regions.
- Memory region descriptors spread of over multiple
invocations.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com> Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Change-Id: Iaee4180aa18d6b7ac7b53685c6589f0ab306e876
Marc Bonnici [Thu, 23 Dec 2021 20:14:02 +0000 (20:14 +0000)]
feat(tsp): add ffa_helpers to enable more FF-A functionality
Include ffa_helpers originally taken from the TF-A Tests repo
to provide support for additional FF-A functionality.
Change-Id: Iacc3ee270d5e3903f86f8078ed915d1e791c1298 Signed-off-by: Marc Bonnici <marc.bonnici@arm.com> Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Since GPC control register fields are permitted to be cached in a TLB,
invalidate TLB after setting fields to ensure future checks are using
the updated values.
Akram Ahmad [Tue, 19 Jul 2022 13:38:46 +0000 (14:38 +0100)]
fix(errata): workaround for Cortex-A78C erratum 2395411
Cortex-A78C erratum 2395411 is a Cat B erratum that affects
revisions r0p1 and r0p2, and is currently open. The workaround
is to set CPUACTLR2_EL1[40] to 1, which will disable folding
of demand requests into older prefetches with L2 miss requests
outstanding.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN2004089/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: I4f0fb278ac20a2eb4dd7e4efd1b1246dd85e48c4
Akram Ahmad [Fri, 22 Jul 2022 15:20:44 +0000 (16:20 +0100)]
fix(errata): workaround for Cortex-A510 erratum 2371937
Cortex-A510 erratum 2371937 is a Cat B erratum that applies
to revisions r0p0, r0p1, r0p2, r0p3, r1p0, and r1p1. It is
fixed in r1p2. The workaround is to set the ATOM field of
CPUECTLR_EL1 (bits [40:38]) to 0b010, which will force all
cacheable atomic operations to be executed near.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1873351/latest
https://developer.arm.com/documentation/SDEN1873361/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: Ia219a609a3397e39631de65831ecff8a3cd1227e
Achin Gupta [Mon, 4 Oct 2021 19:13:36 +0000 (20:13 +0100)]
feat(tsp): add FF-A support to the TSP
This patch adds the FF-A programming model in the test
secure payload to ensure that it can be used to test
the following spec features.
1. SP initialisation on the primary and secondary cpus.
2. An event loop to receive direct requests and respond
with direct responses.
3. Ability to receive messages that indicate power on
and off of a cpu.
4. Ability to handle a secure interrupt.
Signed-off-by: Achin Gupta <achin.gupta@arm.com> Signed-off-by: Marc Bonnici <marc.bonnici@arm.com> Signed-off-by: Shruti <shruti.gupta@arm.com>
Change-Id: I81cf744904d5cdc0b27862b5e4bc6f2cfe58a13a
Akshay Belsare [Tue, 23 Aug 2022 06:09:35 +0000 (11:39 +0530)]
fix(zynqmp): fix for incorrect afi write mask value
Currently, the AFIFM6_WRCTRL bus-width configuration is not happening
correctly due to the wrong register write mask value. To fix this issue
updated the mask value handling logic.
Akram Ahmad [Thu, 21 Jul 2022 14:25:08 +0000 (15:25 +0100)]
fix(errata): workaround for Cortex-A710 erratum 2147715
Cortex-A710 erratum 2147715 is a Cat B erratum that applies
to revision r2p0 of the CPU, and is fixed in r2p1. The work-
around is to set CPUACTLR_EL1[22]=1. Setting this will cause
the CFP instruction to invalidate all branch predictor resources
regardless of the context.
SDEN can be found here:
https://developer.arm.com/documentation/SDEN1775101/latest
Signed-off-by: Akram Ahmad <Akram.Ahmad@arm.com>
Change-Id: I94771bc1fc9b65a0c17d75200ec2b1df8a3279c6
Marc Bonnici [Tue, 23 Nov 2021 14:47:40 +0000 (14:47 +0000)]
feat(fvp/tsp_manifest): add example manifest for TSP
Add an example manifest for the EL3 SPMC on the FVP Platform
that allows booting the TSP example partition.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: Ie7f40328e0313abb5b1a121dfdc22a5f7387587f Signed-off-by: Shruti Gupta <shruti.gupta@arm.com>
Marc Bonnici [Mon, 6 Jun 2022 13:37:57 +0000 (14:37 +0100)]
fix(spmc): fix relinquish validation check
The current implementation expects that the endpoint IDs of all
participants of a memory transaction to be listed in the relinquish
descriptor. As per the FF-A spec, aside from the current partition
ID, only the IDs of stream endpoints whose behalf it is relinquishing
the memory region must be specified.
The current implementation does not currently support proxy endpoints
therefore ensure that the endpoint count is always equal to 1 and
no stream endpoint IDs are specified and instead just verify the
caller is a valid participant in the memory transaction.
Additionally reuse the updated check in the retrieve request flow
for additional verification.
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Change-Id: I3b970196af8a16b2531607775398cb8a2473793b
Juan Pablo Conde [Tue, 12 Jul 2022 20:40:29 +0000 (16:40 -0400)]
feat(rng-trap): add EL3 support for FEAT_RNG_TRAP
FEAT_RNG_TRAP introduces support for EL3 trapping of reads of the
RNDR and RNDRRS registers, which is enabled by setting the
SCR_EL3.TRNDR bit. This patch adds a new build flag
ENABLE_FEAT_RNG_TRAP that enables the feature.
This feature is supported only in AArch64 state from Armv8.5 onwards.
Signed-off-by: Juan Pablo Conde <juanpablo.conde@arm.com>
Change-Id: Ia9f17aef3444d3822bf03809036a1f668c9f2d89
Yann Gautier [Mon, 9 May 2022 15:01:11 +0000 (17:01 +0200)]
feat(stm32mp1): manage STM32MP13 rev.Y
The new SoC version for STM32MP13 is the revision Y. The register
SYSCFG_IDC is updated for this new version with the value 0x1003.
The function stm32mp_get_soc_name() should also be updated to manage
this new SoC revision.
projects / arm-tf.git / log