Leo Yan [Thu, 15 Jun 2017 05:51:22 +0000 (13:51 +0800)]
plat: Hikey960: fix the CPU hotplug
In CPU off callback function, the old code uses the function
hisi_test_pwrdn_allcores() to check if all CPUs in cluster have been
powered off and if it's valid then power off the whole cluster. But the
function hisi_test_pwrdn_allcores() only maintains the different power
states only for CPU suspend/resume flow, so it cannot return correct
states for CPU on/off flow.
This patch is to change use hisi_test_cpu_down() to check if all CPUs
have been powered off, so that can power off the whole cluster properly
when all CPUs in cluster have been hotplugged off.
Signed-off-by: Tao Wang <kevin.wangtao@hisilicon.com> Signed-off-by: Leo Yan <leo.yan@linaro.org>
jagadeesh ujja [Thu, 11 May 2017 11:02:18 +0000 (16:32 +0530)]
CSS:Fix scpi "get_power_state" when ARM_PLAT_MT is set
The ARM_PLAT_MT bit enables the support for MT bit in
MPIDR format. This means that the level 0 affinity
represents the thread and CPU / Cluster levels are
at affinity level 1 and 2 respectively.
This was not catered for in the scpi 'css_scp_get_power_state, API.
Since the SCPI driver can only cater for single threaded CPUs,
this patch fixes the problem by catering for this shift by
effectively ignoring the Thread (level 0) affinity level.
Soren Brinkmann [Wed, 7 Jun 2017 16:51:26 +0000 (09:51 -0700)]
tegra: Fix build errors
The 'impl' variable is guarded by the symbol DEBUG, but used in an INFO
level print statement. INFO is defined based on LOG_LEVEL. Hence, builds
would fail when
- DEBUG=0 && LOG_LEVEL>=LOG_LEVEL_INFO with a variable used but not defined
- DEBUG=1 && LOG_LEVEL<LOG_LEVEL_INFO with a variable defined but not used
Fixing this by guarding impl with the same condition that guards INFO.
Lin Huang [Fri, 12 May 2017 02:26:32 +0000 (10:26 +0800)]
rockchip: check wakeup cpu when resume
unlike rk3399 and rk3368, there are some rockchip 64bit SOC
do not have CPUPD, and pmu_cpuson_entrypoint() is common
function for rockchip platform, so we need to check wakeup
cpu when resume.
Change-Id: I6313e8a9d7c16b03e033414f0cb281646c2159ff Signed-off-by: Lin Huang <hl@rock-chips.com>
Lin Huang [Tue, 16 May 2017 08:40:46 +0000 (16:40 +0800)]
rockchip/rk3399: enable PMU_PERILP_PD_EN bit when suspend
with PMU_PERILP_PD_EN bit enable, the soc will shutdown
cm0, crypto, dcf, imem(normal SRAM), dmac, bootrom, efuse_con,
spi, i2c, uart, saradc, tsadc when suspend, we have M0 code
need to run when suspend in normal SRAM, so we need to take
care of that.
Change-Id: I8c066637e5b81d4b1d53197450b9d592cbe00793 Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Derek Basehore [Tue, 16 May 2017 04:18:28 +0000 (21:18 -0700)]
rockchip/rk3399: Move DRAM restore to PMUSRAM
This moves the DRAM restore code to PMUSRAM. This is so that the
voltage domain that contains the SRAM that it was stored in before may
be turned off during system suspend.
Derek Basehore [Thu, 11 May 2017 06:22:02 +0000 (23:22 -0700)]
rockchip/rk3399: Remove unneeded if statement
The removed if statement would make the same check that the for loop
it is in does to break out of the for loop, so it doesn't make any
sense to keep it there.
Derek Basehore [Thu, 11 May 2017 04:59:31 +0000 (21:59 -0700)]
rockchip/rk3399: Remove unneeded register sets
This removes the mmio_... function calls to set the multicast bit for
the PHY registers when overriding the write leveling values. These are
not needed since multicast is set by default when calling the
function, and it's also better not to leave the side effect of
disabling multicast when exiting the function.
Derek Basehore [Sun, 7 May 2017 06:22:23 +0000 (23:22 -0700)]
rockchip/rk3399: remove unneeded DDR restore function
This removes the phy_dll_bypass_set function as it is unneeded. The
values that function sets are saved during suspend, so the proper
values will be restored on resume.
Derek Basehore [Sat, 6 May 2017 00:53:33 +0000 (17:53 -0700)]
rockchip/rk3399: Save space for DRAM suspend data
This removes the space allocation for the unused PHY register space.
For instance in PHY registers 0-127, only 0-90 are used, so don't save
the 91-127 registers. This saves about 1.6KB of space.
Lin Huang [Thu, 4 May 2017 08:02:45 +0000 (16:02 +0800)]
rockchip: add pmusram section
the function pmu_cpuon_entrypoint() need to run in the pmusram,
we just copy bin file to pmusram before, now we add pmusram section
and link pmu_cpuon_entrypoint() to pmusram directly
Change-Id: Iae31e4c01c480c8e6f565a8f588332b478efdb16 Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Lin Huang [Wed, 22 Feb 2017 10:24:55 +0000 (18:24 +0800)]
rockchip/rk3399: fix DRAM gate training issue
The differential signal of DQS need keep low level
before gate training. It need enable RPULL and disable
PHY side ODT to ensure it when do gate training.
But it can not access the PHY registers to do it when
perform DFS.So the workaroud as below: It is ensure that
the PHY's read gate is landing somewhere in the incoming
DQS's pulses before it starts searching for pre-amble window.
It need get the rddqs_delay_ps to calculate the start point
of gate training for DFS.
Change-Id: I79eabcf4ec9a9c8f4539f68a51f22afba49c72fe Signed-off-by: Lin Huang <hl@rock-chips.com>
Haojian Zhuang [Thu, 1 Jun 2017 04:15:14 +0000 (12:15 +0800)]
hikey960: support BL1 on hikey960 platform
Support BL1 on HiKey960 platform. When recovery mode is detected,
BL1 loads NS BL1U that flushs images into UFS. When normal boot
mode is detected, BL1 loads BL2.
Fix for https://github.com/ARM-software/tf-issues/issues/486
Haojian Zhuang [Thu, 1 Jun 2017 13:55:53 +0000 (21:55 +0800)]
stdlib: import endian head file from freebsd
Import endian head files from FreeBSD 11.0. The link of FreeBSD source code
is https://github.com/freebsd/freebsd
Import machine/endian.h from sys/arm64/include/endian.h in FreeBSD.
commit d09ff72cef8e35dbf62f7363dcbf07b453f06243
Author: andrew <andrew@FreeBSD.org>
Date: Mon Mar 23 11:54:56 2015 +0000
Add the start of the arm64 machine headers. This is the subset needed to
start getting userland libraries building.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Import sys/endian.h from sys/sys/endian.h in FreeBSD.
commit 3c3fa2f5b0c7640373fcbcc3f667bf7794e8e609
Author: phk <phk@FreeBSD.org>
Date: Thu May 20 06:16:13 2010 +0000
Fix some way-past-brucification complaints from FlexeLint.
mbedtls: Don't use tf_snprintf if option not defined
If `MBEDTLS_PLATFORM_SNPRINTF_ALT` isn't used, the function
`mbedtls_platform_set_snprintf()` isn't defined.
In case a platform uses a different mbed TLS configuration file than
the one provided by the Trusted Firmware, and it doesn't define the
mentioned build option, this will result in a build error.
This patch modifies the initialization code so that
`mbedtls_platform_set_snprintf()` is only used if
`MBEDTLS_PLATFORM_SNPRINTF_ALT` is defined, allowing platforms to use
it or not depending on their needs.
Change-Id: I1d5c86d57e9b2871ba463030bf89210ebec5178e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Soby Mathew [Mon, 14 Nov 2016 12:44:32 +0000 (12:44 +0000)]
Add SCMI support for Juno platform
This patch adds the memory map region for the SCMI payload memory
and maps the Juno core indices to SCMI power domains via the
`plat_css_core_pos_to_scmi_dmn_id_map` array.
Soby Mathew [Mon, 14 Nov 2016 12:25:45 +0000 (12:25 +0000)]
CSS: Add SCMI driver for SCP
This patch adds the SCMI driver for communicating with SCP. The power
domain management and system power management protocol of the SCMI
specification[1] is implemented in the driver. The SCP power management
abstraction layer for SCMI for CSS power management is also added.
A new buid option `CSS_USE_SCMI_DRIVER` is introduced to select SCMI
driver over SCPI.
[1] ARM System Control and Management Interface v1.0 (SCMI)
Document number: ARM DEN 0056A
Soby Mathew [Mon, 22 May 2017 15:12:33 +0000 (16:12 +0100)]
cert_create: Use RSASSA-PSS signature scheme for certificates
This patch modifies the `cert_create` tool to use RSASSA-PSS scheme for
signing the certificates. This is compliant with RSA PKCS_2_1 standard as
mandated by TBBR.
Note that the certificates generated by using cert_create tool after this
patch can be authenticated during TBB only if the corresponding mbedtls
driver in ARM Trusted Firmware has the corresponding support.
Soby Mathew [Wed, 31 May 2017 09:35:27 +0000 (10:35 +0100)]
Add support for RSASSAPSS algorithm in mbedtls crypto driver
This patch adds support for RSASSA-PSS Signature Algorithm for
X509 certificates in mbedtls crypto driver. Now the driver supports
RSA PKCS2_1 standard as mandated by TBBR.
NOTE: With this patch, the PKCS1_5 standard compliant RSA signature
is deprecated.
Soby Mathew [Mon, 5 Jun 2017 11:18:04 +0000 (12:18 +0100)]
Increase heapsize for mbedtls library
The mbedTLS library requires larger heap memory for verification of RSASSA-PSS
signature in certificates during Trusted Board Boot. This patch increases the
heap memory for the same.
FreeBSD does not understand #interrupt-map in a device tree. This prevents the
GIC from being set up correctly. This patch removes the #interrupt-map in the
device trees for the Base and Foundation FVPs. This enables correct boot of
FreeBSD on these platforms.
These changes have been tested with FreeBSD and an Ubuntu cloud image
(ubuntu-16.04-server-cloudimg-arm64-uefi1.img) to ensure compatibility with
Linux.
This SMC is as a means for the image loading state machine to go from
COPYING, COPIED or AUTHENTICATED states to RESET state. Previously, this
was only done when the authentication of an image failed or when the
execution of the image finished.
Documentation updated.
Change-Id: Ida6d4c65017f83ae5e27465ec36f54499c6534d9 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Added checks to FWU_SMC_IMAGE_COPY to prevent loading data into a
memory region where another image data is already loaded.
Without this check, if two images are configured to be loaded in
overlapping memory regions, one of them can be loaded and
authenticated and the copy function is still able to load data from
the second image on top of the first one. Since the first image is
still in authenticated state, it can be executed, which could lead to
the execution of unauthenticated arbitrary code of the second image.
Firmware update documentation updated.
Change-Id: Ib6871e569794c8e610a5ea59fe162ff5dcec526c Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
It doesn't make sense to use the `-pedantic` flag when building the
Trusted Firmware as we use GNU extensions and so our code is not
fully ISO C compliant. This flag only makes sense if the code intends to
be ISO C compliant.
Change-Id: I6273564112759ff57f03b273f5349733a5f38aef Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
ARM GIC-600 IP complies with ARM GICv3 architecture, but among others,
implements a power control register in the Redistributor frame. This
register must be programmed to mark the frame as powered on, before
accessing other registers in the frame. Rest of initialization sequence
remains the same.
The driver provides APIs for Redistributor power management, and
overrides those in the generic GICv3 driver. The driver data is shared
between generic GICv3 driver and that of GIC-600.
For FVP platform, the GIC-600 driver is chosen when FVP_USE_GIC_DRIVER
is set to FVP_GIC600. Also update user guide.
David Wang [Wed, 9 Nov 2016 16:29:02 +0000 (16:29 +0000)]
Add support for Cortex-A75 and Cortex-A55 CPUs
Both Cortex-A75 and Cortex-A55 CPUs use the ARM DynamIQ Shared Unit
(DSU). The power-down and power-up sequences are therefore mostly
managed in hardware, and required software operations are considerably
simpler.
mbed TLS provides the debug API `mbedtls_memory_buffer_alloc_status()`
to analyse the RAM usage of the library.
When RSA is selected as algorithm, the maximum heap usage in FVP and
Juno has been determined empirically to be approximately 5.5 KiB.
However, The default heap size used when RSA is selected is 8 KiB.
This patch reduces the buffer from 8 KiB to 6 KiB so that the BSS
sections of both BL1 and BL2 are 2 KiB smaller when the firmware is
compiled with TBB support.
Change-Id: I43878a4e7af50c97be9c8d027c728c8483f24fbf Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Haojian Zhuang [Wed, 31 May 2017 03:00:15 +0000 (11:00 +0800)]
drivers: add ufs stack
If UFS device is initialized, we could just make it out of
hibernation by UFS_FLAGS_SKIPINIT. And vendor's dirver is always
focus on PHY setting. We could use UFS driver directly if it
exits from hibernation.
There're eight LUNs in UFS device. The UFS driver only provides
the read/write API with LUN. User could define his own read/write
since user may want to access different LUNs.
mbedtls: Use `MBEDTLS_SHA256_SMALLER` in ARM platforms
This options enables an implementation of SHA-256 that has a smaller
code footprint (~1.6 KB less) but is also ~30% slower. For ARM
platforms, code size is currently considered more important than
execution speed in the mbed TLS crypto module.
Added a small note about this option to the documentation of the
authentication framework.
Change-Id: I4c0b221ea5d3466465261316ba07b627fa01b233 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The Trusted Firmware uses a subset of the APIs provided by mbed TLS.
This subset internally uses `snprintf`, but the only format specifier
used is '%d', which is supported by `tf_snprintf`.
This patch makes mbed TLS use `tf_snprintf` instead of `snprintf`,
saving 3 KB in both debug and release builds when TBBR is enabled.
Change-Id: I7f992a21015930d7c0f4660e7a28ceefd60b9597 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
This is a reduced version of `snprintf` that only supports formats '%d',
'%i' and '%u'. It can be used when the full `snprintf` is not needed in
order to save memory. If it finds an unknown format specifier, it
prints an error message and panics.
Change-Id: I2cb06fcdf74cda2c43caf73ae0762a91499fc04e Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
projects / arm-tf.git / log