HW guys have an evaluation about the impact about EOS, and say the impact
is quite small, so they have removed EOS detection support. This patch
removes EOS feature.
revert commit
6892f6e483c3fcbe378608f4bed369b0261e396c
directly reverting it gives a hunk error, so please use this one.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: fixed up commit message for update that the feature's really gone]
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
I915_READ(PORT_HOTPLUG_STAT);
-
- /* EOS interrupts occurs */
- if (IS_IGD(dev) &&
- (hotplug_status & CRT_EOS_INT_STATUS)) {
- u32 temp;
-
- DRM_DEBUG_DRIVER("EOS interrupt occurs\n");
- /* status is already cleared */
- temp = I915_READ(ADPA);
- temp &= ~ADPA_DAC_ENABLE;
- I915_WRITE(ADPA, temp);
-
- temp = I915_READ(PORT_HOTPLUG_EN);
- temp &= ~CRT_EOS_INT_EN;
- I915_WRITE(PORT_HOTPLUG_EN, temp);
-
- temp = I915_READ(PORT_HOTPLUG_STAT);
- if (temp & CRT_EOS_INT_STATUS)
- I915_WRITE(PORT_HOTPLUG_STAT,
- CRT_EOS_INT_STATUS);
- }
}
I915_WRITE(IIR, iir);
#define SDVOB_HOTPLUG_INT_EN (1 << 26)
#define SDVOC_HOTPLUG_INT_EN (1 << 25)
#define TV_HOTPLUG_INT_EN (1 << 18)
-#define CRT_EOS_INT_EN (1 << 10)
#define CRT_HOTPLUG_INT_EN (1 << 9)
#define CRT_HOTPLUG_FORCE_DETECT (1 << 3)
#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8)
#define DPC_HOTPLUG_INT_STATUS (1 << 28)
#define HDMID_HOTPLUG_INT_STATUS (1 << 27)
#define DPD_HOTPLUG_INT_STATUS (1 << 27)
-#define CRT_EOS_INT_STATUS (1 << 12)
#define CRT_HOTPLUG_INT_STATUS (1 << 11)
#define TV_HOTPLUG_INT_STATUS (1 << 10)
#define CRT_HOTPLUG_MONITOR_MASK (3 << 8)
}
I915_WRITE(reg, temp);
-
- if (IS_IGD(dev)) {
- if (mode == DRM_MODE_DPMS_OFF) {
- /* turn off DAC */
- temp = I915_READ(PORT_HOTPLUG_EN);
- temp &= ~CRT_EOS_INT_EN;
- I915_WRITE(PORT_HOTPLUG_EN, temp);
-
- temp = I915_READ(PORT_HOTPLUG_STAT);
- if (temp & CRT_EOS_INT_STATUS)
- I915_WRITE(PORT_HOTPLUG_STAT,
- CRT_EOS_INT_STATUS);
- } else {
- /* turn on DAC. EOS interrupt must be enabled after DAC
- * is enabled, so it sounds not good to enable it in
- * i915_driver_irq_postinstall()
- * wait 12.5ms after DAC is enabled
- */
- msleep(13);
- temp = I915_READ(PORT_HOTPLUG_STAT);
- if (temp & CRT_EOS_INT_STATUS)
- I915_WRITE(PORT_HOTPLUG_STAT,
- CRT_EOS_INT_STATUS);
- temp = I915_READ(PORT_HOTPLUG_EN);
- temp |= CRT_EOS_INT_EN;
- I915_WRITE(PORT_HOTPLUG_EN, temp);
- }
- }
}
static int intel_crt_mode_valid(struct drm_connector *connector,