select PL01X_SERIAL
select SEMIHOSTING
+config TARGET_VEXPRESS64_BASER_FVP
+ bool "Support Versatile Express ARMv8r64 FVP BASE model"
+ select ARM64
+ select DM
+ select DM_SERIAL
+ select PL01X_SERIAL
+
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
-if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO
+if TARGET_VEXPRESS64_BASE_FVP || TARGET_VEXPRESS64_JUNO || \
+ TARGET_VEXPRESS64_BASER_FVP
config SYS_BOARD
default "vexpress64"
default "armltd"
config SYS_CONFIG_NAME
- default "vexpress_aemv8a"
+ default "vexpress_aemv8"
config JUNO_DTB_PART
string "NOR flash partition holding DTB"
M: Linus Walleij <linus.walleij@linaro.org>
S: Maintained
F: configs/vexpress_aemv8a_juno_defconfig
+
+VEXPRESS64 BASER_FVP
+M: Peter Hoyes <Peter.Hoyes@arm.com>
+S: Maintained
+F: configs/vexpress_aemv8r_defconfig
#include <dm/platform_data/serial_pl01x.h>
#include "pcie.h"
#include <asm/armv8/mmu.h>
+#include <asm/armv8/mpu.h>
DECLARE_GLOBAL_DATA_PTR;
struct mm_region *mem_map = vexpress64_mem_map;
+static struct mpu_region vexpress64_aemv8r_mem_map[] = {
+ {
+ .start = 0x0UL,
+ .end = 0x7fffffffUL,
+ .attrs = PRLAR_ATTRIDX(MT_NORMAL)
+ }, {
+ .start = 0x80000000UL,
+ .end = 0xffffffffUL,
+ .attrs = PRLAR_ATTRIDX(MT_DEVICE_NGNRNE)
+ }, {
+ .start = 0x100000000UL,
+ .end = 0xffffffffffUL,
+ .attrs = PRLAR_ATTRIDX(MT_NORMAL)
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mpu_region *mpu_mem_map = vexpress64_aemv8r_mem_map;
+
/* This function gets replaced by platforms supporting PCIe.
* The replacement function, eg. on Juno, initialises the PCIe bus.
*/
--- /dev/null
+CONFIG_ARM=y
+CONFIG_TARGET_VEXPRESS64_BASER_FVP=y
+CONFIG_SYS_TEXT_BASE=0x00001000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0xff000000
+CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_IDENT_STRING=" vexpress_aemv8r64"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0 earlycon=pl011,0x9c090000 rootfstype=ext4 root=/dev/vda1 rw rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="fdt addr ${fdt_addr}; fdt resize; booti $kernel_addr - $fdt_addr"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SYS_PROMPT="VExpress64# "
+CONFIG_OF_LIBFDT=y
Rather than create a new armv8 board similar to armltd/vexpress64, add
semihosting calls to the existing one, enabled with CONFIG_SEMIHOSTING
and CONFIG_BASE_FVP both set. Also reuse the existing board config file
-vexpress_aemv8a.h but differentiate the two models by the presence or
+vexpress_aemv8.h but differentiate the two models by the presence or
absence of CONFIG_BASE_FVP. This change is tested and works on both the
Foundation and Base fastmodel simulators.
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define CONFIG_REMAKE_ELF
+
+/* Link Definitions */
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#else
+/* ATF loads u-boot here for BASE_FVP model */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#endif
+
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+/* CS register bases for the original memory map. */
+#ifdef CONFIG_TARGET_VEXPRESS64_BASER_FVP
+#define V2M_BASE 0x00000000
+#define V2M_PA_BASE 0x80000000
+#else
+#define V2M_BASE 0x80000000
+#define V2M_PA_BASE 0x00000000
+#endif
+
+#define V2M_PA_CS0 (V2M_PA_BASE + 0x00000000)
+#define V2M_PA_CS1 (V2M_PA_BASE + 0x14000000)
+#define V2M_PA_CS2 (V2M_PA_BASE + 0x18000000)
+#define V2M_PA_CS3 (V2M_PA_BASE + 0x1c000000)
+#define V2M_PA_CS4 (V2M_PA_BASE + 0x0c000000)
+#define V2M_PA_CS5 (V2M_PA_BASE + 0x10000000)
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define V2M_UART0 0x7ff80000
+#define V2M_UART1 0x7ff70000
+#else /* Not Juno */
+#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+#endif
+
+#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY 100000000 /* 100MHz */
+
+/* Generic Interrupt Controller Definitions */
+#ifdef CONFIG_GICV3
+#define GICD_BASE (V2M_PA_BASE + 0x2f000000)
+#define GICR_BASE (V2M_PA_BASE + 0x2f100000)
+#else
+
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define GICD_BASE (0x2C010000)
+#define GICC_BASE (0x2C02f000)
+#else
+#define GICD_BASE (V2M_PA_BASE + 0x2f000000)
+#define GICC_BASE (V2M_PA_BASE + 0x2c000000)
+#endif
+#endif /* !CONFIG_GICV3 */
+
+#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
+/* The Vexpress64 simulators use SMSC91C111 */
+#define CONFIG_SMC91111 1
+#define CONFIG_SMC91111_BASE (V2M_PA_BASE + 0x01A000000)
+#endif
+
+/* PL011 Serial Configuration */
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_PL011_CLOCK 7372800
+#else
+#define CONFIG_PL011_CLOCK 24000000
+#endif
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* Miscellaneous configurable options */
+
+/* Physical Memory Map */
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+/* Top 16MB reserved for secure world use */
+#define DRAM_SEC_SIZE 0x01000000
+#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define PHYS_SDRAM_2 (0x880000000)
+#define PHYS_SDRAM_2_SIZE 0x180000000
+#elif CONFIG_NR_DRAM_BANKS == 2
+#define PHYS_SDRAM_2 (0x880000000)
+#define PHYS_SDRAM_2_SIZE 0x80000000
+#endif
+
+/* Enable memtest */
+
+/* Initial environment variables */
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+/* Copy the kernel and FDT to DRAM memory and boot */
+#define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
+ "bootcmd_afs=" \
+ "afs load ${kernel_name} ${kernel_addr_r} ;"\
+ "if test $? -eq 1; then "\
+ " echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\
+ " afs load ${kernel_alt_name} ${kernel_addr_r};"\
+ "fi ; "\
+ "afs load ${fdtfile} ${fdt_addr_r} ;"\
+ "if test $? -eq 1; then "\
+ " echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\
+ " afs load ${fdt_alt_name} ${fdt_addr_r}; "\
+ "fi ; "\
+ "fdt addr ${fdt_addr_r}; fdt resize; " \
+ "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\
+ "then "\
+ " setenv ramdisk_param ${ramdisk_addr_r}; "\
+ "else "\
+ " setenv ramdisk_param -; "\
+ "fi ; " \
+ "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
+#define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(USB, usb, 0) \
+ func(SATA, sata, 0) \
+ func(SATA, sata, 1) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na) \
+ func(AFS, afs, na)
+
+#include <config_distro_bootcmd.h>
+
+/*
+ * Defines where the kernel and FDT exist in NOR flash and where it will
+ * be copied into DRAM
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_name=norkern\0" \
+ "kernel_alt_name=Image\0" \
+ "kernel_addr_r=0x80080000\0" \
+ "ramdisk_name=ramdisk.img\0" \
+ "ramdisk_addr_r=0x88000000\0" \
+ "fdtfile=board.dtb\0" \
+ "fdt_alt_name=juno\0" \
+ "fdt_addr_r=0x80000000\0" \
+ BOOTENV
+
+#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_name=Image\0" \
+ "kernel_addr=0x80080000\0" \
+ "initrd_name=ramdisk.img\0" \
+ "initrd_addr=0x88000000\0" \
+ "fdtfile=devtree.dtb\0" \
+ "fdt_addr=0x83000000\0" \
+ "boot_name=boot.img\0" \
+ "boot_addr=0x8007f800\0"
+
+#ifndef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "if smhload ${boot_name} ${boot_addr}; then " \
+ " set bootargs; " \
+ " abootimg addr ${boot_addr}; " \
+ " abootimg get dtb --index=0 fdt_addr; " \
+ " bootm ${boot_addr} ${boot_addr} " \
+ " ${fdt_addr}; " \
+ "else; " \
+ " set fdt_high 0xffffffffffffffff; " \
+ " set initrd_high 0xffffffffffffffff; " \
+ " smhload ${kernel_name} ${kernel_addr}; " \
+ " smhload ${fdtfile} ${fdt_addr}; " \
+ " smhload ${initrd_name} ${initrd_addr} "\
+ " initrd_end; " \
+ " fdt addr ${fdt_addr}; fdt resize; " \
+ " fdt chosen ${initrd_addr} ${initrd_end}; " \
+ " booti $kernel_addr - $fdt_addr; " \
+ "fi"
+#endif
+
+#elif CONFIG_TARGET_VEXPRESS64_BASER_FVP
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "kernel_addr=0x00800000\0" \
+ "fdt_addr=0x03000000\0" \
+ "boot_addr=0x0007f800\0"
+#endif
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 64 /* max command args */
+
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT 259
+/* Store environment at top of flash in the same location as blank.img */
+/* in the Juno firmware. */
+#else
+#define CONFIG_SYS_FLASH_BASE (V2M_PA_BASE + 0x0C000000)
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+/* Store environment at top of flash */
+#endif
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#ifdef CONFIG_USB_EHCI_HCD
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#endif
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define FLASH_MAX_SECTOR_SIZE 0x00040000
+
+#ifdef CONFIG_TARGET_VEXPRESS64_BASER_FVP
+#define CONFIG_ARMV8_SWITCH_TO_EL1
+#endif
+
+#endif /* __VEXPRESS_AEMV8A_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- */
-
-#ifndef __VEXPRESS_AEMV8A_H
-#define __VEXPRESS_AEMV8A_H
-
-#define CONFIG_REMAKE_ELF
-
-/* Link Definitions */
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
-/* ATF loads u-boot here for BASE_FVP model */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
-#elif CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#endif
-
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/* CS register bases for the original memory map. */
-#define V2M_PA_CS0 0x00000000
-#define V2M_PA_CS1 0x14000000
-#define V2M_PA_CS2 0x18000000
-#define V2M_PA_CS3 0x1c000000
-#define V2M_PA_CS4 0x0c000000
-#define V2M_PA_CS5 0x10000000
-
-#define V2M_PERIPH_OFFSET(x) (x << 16)
-#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
-#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
-#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
-
-#define V2M_BASE 0x80000000
-
-/* Common peripherals relative to CS7. */
-#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
-#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
-#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
-#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
-
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define V2M_UART0 0x7ff80000
-#define V2M_UART1 0x7ff70000
-#else /* Not Juno */
-#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
-#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
-#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
-#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
-#endif
-
-#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
-
-#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
-#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
-
-#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
-#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
-
-#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
-
-#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
-
-/* System register offsets. */
-#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
-#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
-#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 24000000 /* 24MHz */
-
-/* Generic Interrupt Controller Definitions */
-#ifdef CONFIG_GICV3
-#define GICD_BASE (0x2f000000)
-#define GICR_BASE (0x2f100000)
-#else
-
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
-#define GICD_BASE (0x2f000000)
-#define GICC_BASE (0x2c000000)
-#elif CONFIG_TARGET_VEXPRESS64_JUNO
-#define GICD_BASE (0x2C010000)
-#define GICC_BASE (0x2C02f000)
-#endif
-#endif /* !CONFIG_GICV3 */
-
-#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
-/* The Vexpress64 simulators use SMSC91C111 */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE (0x01A000000)
-#endif
-
-/* PL011 Serial Configuration */
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_PL011_CLOCK 7372800
-#else
-#define CONFIG_PL011_CLOCK 24000000
-#endif
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Miscellaneous configurable options */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
-/* Top 16MB reserved for secure world use */
-#define DRAM_SEC_SIZE 0x01000000
-#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define PHYS_SDRAM_2 (0x880000000)
-#define PHYS_SDRAM_2_SIZE 0x180000000
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP && CONFIG_NR_DRAM_BANKS == 2
-#define PHYS_SDRAM_2 (0x880000000)
-#define PHYS_SDRAM_2_SIZE 0x80000000
-#endif
-
-/* Enable memtest */
-
-/* Initial environment variables */
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-/* Copy the kernel and FDT to DRAM memory and boot */
-#define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
- "bootcmd_afs=" \
- "afs load ${kernel_name} ${kernel_addr_r} ;"\
- "if test $? -eq 1; then "\
- " echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\
- " afs load ${kernel_alt_name} ${kernel_addr_r};"\
- "fi ; "\
- "afs load ${fdtfile} ${fdt_addr_r} ;"\
- "if test $? -eq 1; then "\
- " echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\
- " afs load ${fdt_alt_name} ${fdt_addr_r}; "\
- "fi ; "\
- "fdt addr ${fdt_addr_r}; fdt resize; " \
- "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\
- "then "\
- " setenv ramdisk_param ${ramdisk_addr_r}; "\
- "else "\
- " setenv ramdisk_param -; "\
- "fi ; " \
- "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
-#define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "
-
-#define BOOT_TARGET_DEVICES(func) \
- func(USB, usb, 0) \
- func(SATA, sata, 0) \
- func(SATA, sata, 1) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na) \
- func(AFS, afs, na)
-
-#include <config_distro_bootcmd.h>
-
-/*
- * Defines where the kernel and FDT exist in NOR flash and where it will
- * be copied into DRAM
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=norkern\0" \
- "kernel_alt_name=Image\0" \
- "kernel_addr_r=0x80080000\0" \
- "ramdisk_name=ramdisk.img\0" \
- "ramdisk_addr_r=0x88000000\0" \
- "fdtfile=board.dtb\0" \
- "fdt_alt_name=juno\0" \
- "fdt_addr_r=0x80000000\0" \
- BOOTENV
-
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=Image\0" \
- "kernel_addr=0x80080000\0" \
- "initrd_name=ramdisk.img\0" \
- "initrd_addr=0x88000000\0" \
- "fdtfile=devtree.dtb\0" \
- "fdt_addr=0x83000000\0" \
- "boot_name=boot.img\0" \
- "boot_addr=0x8007f800\0"
-
-#ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "if smhload ${boot_name} ${boot_addr}; then " \
- " set bootargs; " \
- " abootimg addr ${boot_addr}; " \
- " abootimg get dtb --index=0 fdt_addr; " \
- " bootm ${boot_addr} ${boot_addr} " \
- " ${fdt_addr}; " \
- "else; " \
- " set fdt_high 0xffffffffffffffff; " \
- " set initrd_high 0xffffffffffffffff; " \
- " smhload ${kernel_name} ${kernel_addr}; " \
- " smhload ${fdtfile} ${fdt_addr}; " \
- " smhload ${initrd_name} ${initrd_addr} "\
- " initrd_end; " \
- " fdt addr ${fdt_addr}; fdt resize; " \
- " fdt chosen ${initrd_addr} ${initrd_end}; " \
- " booti $kernel_addr - $fdt_addr; " \
- "fi"
-#endif
-#endif
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 64 /* max command args */
-
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_FLASH_BASE 0x08000000
-/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT 259
-/* Store environment at top of flash in the same location as blank.img */
-/* in the Juno firmware. */
-#else
-#define CONFIG_SYS_FLASH_BASE 0x0C000000
-/* 256 x 256KiB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-/* Store environment at top of flash */
-#endif
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-#define FLASH_MAX_SECTOR_SIZE 0x00040000
-
-#endif /* __VEXPRESS_AEMV8A_H */
projects / uboot.git / commitdiff