Fix the documentation file names: s/apalix/apalis/.
Fixes: fff2a83ced ("toradex: MAINTAINERS: entries for new reST docs")
Fixes: f66f475221 ("doc: board: apalis-imx8x: add documentation")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
F: arch/arm/dts/fsl-imx8-apalis-u-boot.dtsi
F: board/toradex/apalis-imx8/
F: configs/apalis-imx8_defconfig
-F: doc/board/toradex/apalix-imx8.rst
+F: doc/board/toradex/apalis-imx8.rst
F: include/configs/apalis-imx8.h
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+Apalis iMX8QM V1.0B Module
+==========================
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Load U-Boot binary using uuu
+- Flash U-Boot binary into the eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware
+--------------------------------------
+
+.. code-block:: bash
+
+ $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
+ $ cd imx-atf/
+ $ make PLAT=imx8qm bl31
+
+Get scfw_tcm.bin and ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
+ bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
+ $ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
+ $ chmod +x firmware-imx-8.0.bin
+ $ ./firmware-imx-8.0.bin
+
+Copy the following binaries to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp imx-atf/build/imx8qm/release/bl31.bin .
+ $ cp u-boot/u-boot.bin .
+
+Copy the following firmware to the U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
+
+Build U-Boot
+------------
+.. code-block:: bash
+
+ $ make apalis-imx8_defconfig
+ $ make u-boot-dtb.imx
+
+Load the U-Boot Binary Using UUU
+--------------------------------
+
+Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
+
+https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
+
+Put the module into USB recovery aka serial downloader mode, connect USB device
+to your host and execute uuu:
+
+.. code-block:: bash
+
+ sudo ./uuu u-boot/u-boot-dtb.imx
+
+Flash the U-Boot Binary into the eMMC
+-------------------------------------
+
+Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
+partition and boot:
+
+.. code-block:: bash
+
+ load mmc 1:1 $loadaddr u-boot-dtb.imx
+ setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ mmc dev 0 1
+ mmc write ${loadaddr} 0x0 ${blkcnt}
--- /dev/null
+.. SPDX-License-Identifier: GPL-2.0+
+
+Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
+=================================================
+
+Quick Start
+-----------
+
+- Get and Build the ARM trusted firmware
+- Get System Controller firmware
+- Get SECO container
+- Build U-Boot
+- Load U-Boot binary using uuu
+- Flash U-Boot binary into the eMMC
+- Boot
+
+Note: builddir is U-Boot build directory (source directory for in-tree builds)
+
+Get and Build the ARM Trusted Firmware
+--------------------------------------
+
+.. code-block:: bash
+
+ $ cd $(builddir)
+ $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git
+ $ make PLAT=imx8qx bl31 -C imx-atf
+ $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
+
+Get System Controller firmware
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
+
+Get SECO container
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
+ $ sh imx-seco-3.7.4.bin
+ $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
+
+Build U-Boot
+------------
+.. code-block:: bash
+
+ $ make apalis-imx8x_defconfig
+ $ make u-boot-dtb.imx
+
+Load the U-Boot Binary Using UUU
+--------------------------------
+
+Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
+
+https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
+
+Put the module into USB recovery aka serial downloader mode, connect USB device
+to your host and execute uuu:
+
+.. code-block:: bash
+
+ sudo ./uuu $(builddir)/u-boot-dtb.imx
+
+Flash the U-Boot Binary into the eMMC
+-------------------------------------
+
+Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
+partition and boot:
+
+.. code-block:: bash
+
+ load mmc 1:1 $loadaddr u-boot-dtb.imx
+ setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+ mmc dev 0 1
+ mmc write ${loadaddr} 0x0 ${blkcnt}
+++ /dev/null
-.. SPDX-License-Identifier: GPL-2.0+
-
-Apalis iMX8QM V1.0B Module
-==========================
-
-Quick Start
------------
-
-- Build the ARM trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Get and Build the ARM Trusted Firmware
---------------------------------------
-
-.. code-block:: bash
-
- $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
- $ cd imx-atf/
- $ make PLAT=imx8qm bl31
-
-Get scfw_tcm.bin and ahab-container.img
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-
- bsp/imx-sc-firmware/files/mx8qm-apalis-scfw-tcm.bin?raw=true
- $ mv mx8qm-apalis-scfw-tcm.bin\?raw\=true mx8qm-apalis-scfw-tcm.bin
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
- $ chmod +x firmware-imx-8.0.bin
- $ ./firmware-imx-8.0.bin
-
-Copy the following binaries to the U-Boot folder:
-
-.. code-block:: bash
-
- $ cp imx-atf/build/imx8qm/release/bl31.bin .
- $ cp u-boot/u-boot.bin .
-
-Copy the following firmware to the U-Boot folder:
-
-.. code-block:: bash
-
- $ cp firmware-imx-8.0/firmware/seco/ahab-container.img .
-
-Build U-Boot
-------------
-.. code-block:: bash
-
- $ make apalis-imx8_defconfig
- $ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
---------------------------------
-
-Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-.. code-block:: bash
-
- sudo ./uuu u-boot/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
--------------------------------------
-
-Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
-partition and boot:
-
-.. code-block:: bash
-
- load mmc 1:1 $loadaddr u-boot-dtb.imx
- setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
- mmc dev 0 1
- mmc write ${loadaddr} 0x0 ${blkcnt}
+++ /dev/null
-.. SPDX-License-Identifier: GPL-2.0+
-
-Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
-=================================================
-
-Quick Start
------------
-
-- Get and Build the ARM trusted firmware
-- Get System Controller firmware
-- Get SECO container
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Note: builddir is U-Boot build directory (source directory for in-tree builds)
-
-Get and Build the ARM Trusted Firmware
---------------------------------------
-
-.. code-block:: bash
-
- $ cd $(builddir)
- $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git
- $ make PLAT=imx8qx bl31 -C imx-atf
- $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
-
-Get System Controller firmware
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
-
-Get SECO container
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
- $ sh imx-seco-3.7.4.bin
- $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
-
-Build U-Boot
-------------
-.. code-block:: bash
-
- $ make apalis-imx8x_defconfig
- $ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
---------------------------------
-
-Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-.. code-block:: bash
-
- sudo ./uuu $(builddir)/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
--------------------------------------
-
-Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
-partition and boot:
-
-.. code-block:: bash
-
- load mmc 1:1 $loadaddr u-boot-dtb.imx
- setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
- mmc dev 0 1
- mmc write ${loadaddr} 0x0 ${blkcnt}
.. toctree::
:maxdepth: 2
- apalix-imx8
- apalix-imx8x
+ apalis-imx8
+ apalis-imx8x
colibri_imx7
colibri-imx8x
verdin-imx8mm
projects / uboot.git / commitdiff