#
obj-$(CONFIG_$(SPL_)DM_USB) += common.o
+obj-$(CONFIG_USB_MUSB_HOST) += usb_urb.o
+obj-$(CONFIG_USB_MUSB_GADGET) += usb_urb.o
+obj-$(CONFIG_USB_R8A66597_HCD) += usb_urb.o
obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o fsl-errata.o
obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o fsl-errata.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common code for usb urb handling, based on the musb-new code
+ *
+ * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
+ *
+ */
+
+#include <dm/device.h>
+#include <dm/device_compat.h>
+#include <linux/usb/usb_urb_compat.h>
+
+#include <time.h>
+#include <usb.h>
+
+#if CONFIG_IS_ENABLED(DM_USB)
+struct usb_device *usb_dev_get_parent(struct usb_device *udev)
+{
+ struct udevice *parent = udev->dev->parent;
+
+ /*
+ * When called from usb-uclass.c: usb_scan_device() udev->dev points
+ * to the parent udevice, not the actual udevice belonging to the
+ * udev as the device is not instantiated yet.
+ *
+ * If dev is an usb-bus, then we are called from usb_scan_device() for
+ * an usb-device plugged directly into the root port, return NULL.
+ */
+ if (device_get_uclass_id(udev->dev) == UCLASS_USB)
+ return NULL;
+
+ /*
+ * If these 2 are not the same we are being called from
+ * usb_scan_device() and udev itself is the parent.
+ */
+ if (dev_get_parent_priv(udev->dev) != udev)
+ return udev;
+
+ /* We are being called normally, use the parent pointer */
+ if (device_get_uclass_id(parent) == UCLASS_USB_HUB)
+ return dev_get_parent_priv(parent);
+
+ return NULL;
+}
+#else
+struct usb_device *usb_dev_get_parent(struct usb_device *udev)
+{
+ return udev->parent;
+}
+#endif
+
+static void usb_urb_complete(struct urb *urb)
+{
+ urb->dev->status &= ~USB_ST_NOT_PROC;
+ urb->dev->act_len = urb->actual_length;
+
+ if (urb->status == -EINPROGRESS)
+ urb->status = 0;
+}
+
+void usb_urb_fill(struct urb *urb, struct usb_host_endpoint *hep,
+ struct usb_device *dev, int endpoint_type,
+ unsigned long pipe, void *buffer, int len,
+ struct devrequest *setup, int interval)
+{
+ int epnum = usb_pipeendpoint(pipe);
+ int is_in = usb_pipein(pipe);
+ u16 maxpacketsize = is_in ? dev->epmaxpacketin[epnum] :
+ dev->epmaxpacketout[epnum];
+
+ memset(urb, 0, sizeof(struct urb));
+ memset(hep, 0, sizeof(struct usb_host_endpoint));
+ INIT_LIST_HEAD(&hep->urb_list);
+ INIT_LIST_HEAD(&urb->urb_list);
+ urb->ep = hep;
+ urb->complete = usb_urb_complete;
+ urb->status = -EINPROGRESS;
+ urb->dev = dev;
+ urb->pipe = pipe;
+ urb->transfer_buffer = buffer;
+ urb->transfer_dma = (unsigned long)buffer;
+ urb->transfer_buffer_length = len;
+ urb->setup_packet = (unsigned char *)setup;
+
+ urb->ep->desc.wMaxPacketSize = __cpu_to_le16(maxpacketsize);
+ urb->ep->desc.bmAttributes = endpoint_type;
+ urb->ep->desc.bEndpointAddress = ((is_in ? USB_DIR_IN : USB_DIR_OUT) |
+ epnum);
+ urb->ep->desc.bInterval = interval;
+}
+
+int usb_urb_submit(struct usb_hcd *hcd, struct urb *urb)
+{
+ const struct usb_urb_ops *ops = hcd->urb_ops;
+ unsigned long timeout;
+ int ret;
+
+ if (!ops)
+ return -EINVAL;
+
+ ret = ops->urb_enqueue(hcd, urb, 0);
+ if (ret < 0) {
+ printf("Failed to enqueue URB to controller\n");
+ return ret;
+ }
+
+ timeout = get_timer(0) + USB_TIMEOUT_MS(urb->pipe);
+ do {
+ if (ctrlc())
+ return -EIO;
+ ops->isr(0, hcd);
+ } while (urb->status == -EINPROGRESS && get_timer(0) < timeout);
+
+ if (urb->status == -EINPROGRESS)
+ ops->urb_dequeue(hcd, urb, -ETIME);
+
+ return urb->status;
+}
+
+int usb_urb_submit_control(struct usb_hcd *hcd, struct urb *urb,
+ struct usb_host_endpoint *hep,
+ struct usb_device *dev, unsigned long pipe,
+ void *buffer, int len, struct devrequest *setup,
+ int interval, enum usb_device_speed speed)
+{
+ const struct usb_urb_ops *ops = hcd->urb_ops;
+
+ usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_CONTROL, pipe, buffer,
+ len, setup, 0);
+
+ /* Fix speed for non hub-attached devices */
+ if (!usb_dev_get_parent(dev)) {
+ dev->speed = speed;
+ if (ops->hub_control)
+ return ops->hub_control(hcd, dev, pipe, buffer, len,
+ setup);
+ }
+
+ return usb_urb_submit(hcd, urb);
+}
+
+int usb_urb_submit_bulk(struct usb_hcd *hcd, struct urb *urb,
+ struct usb_host_endpoint *hep, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int len)
+{
+ usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_BULK, pipe, buffer, len,
+ NULL, 0);
+
+ return usb_urb_submit(hcd, urb);
+}
+
+int usb_urb_submit_irq(struct usb_hcd *hcd, struct urb *urb,
+ struct usb_host_endpoint *hep, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int len, int interval)
+{
+ usb_urb_fill(urb, hep, dev, USB_ENDPOINT_XFER_INT, pipe, buffer, len,
+ NULL, interval);
+
+ return usb_urb_submit(hcd, urb);
+}
#include <dm/device_compat.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
+#include <linux/usb/usb_urb_compat.h>
#include <power/regulator.h>
#include "r8a66597.h"
#define R8A66597_DPRINT(...)
#endif
-static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev)
-{
- struct udevice *parent = udev->dev->parent;
-
- /*
- * When called from usb-uclass.c: usb_scan_device() udev->dev points
- * to the parent udevice, not the actual udevice belonging to the
- * udev as the device is not instantiated yet.
- *
- * If dev is an usb-bus, then we are called from usb_scan_device() for
- * an usb-device plugged directly into the root port, return NULL.
- */
- if (device_get_uclass_id(udev->dev) == UCLASS_USB)
- return NULL;
-
- /*
- * If these 2 are not the same we are being called from
- * usb_scan_device() and udev itself is the parent.
- */
- if (dev_get_parent_priv(udev->dev) != udev)
- return udev;
-
- /* We are being called normally, use the parent pointer */
- if (device_get_uclass_id(parent) == UCLASS_USB_HUB)
- return dev_get_parent_priv(parent);
-
- return NULL;
-}
-
static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
{
struct usb_device *parent = usb_dev_get_parent(dev);
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
+#include <linux/usb/usb_urb_compat.h>
#include <asm/io.h>
#include "linux-compat.h"
-#include "usb-compat.h"
#endif
#include "musb_core.h"
#include <dm/device_compat.h>
#include <usb.h>
#include <linux/bug.h>
+#include <linux/usb/usb_urb_compat.h>
#include "linux-compat.h"
-#include "usb-compat.h"
#endif
#include "musb_core.h"
#ifndef _MUSB_HOST_H
#define _MUSB_HOST_H
#ifdef __UBOOT__
-#include "usb-compat.h"
+#include <linux/usb/usb_urb_compat.h>
#endif
static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
#include <linux/errno.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/usb_urb_compat.h>
#include <usb.h>
#include "linux-compat.h"
-#include "usb-compat.h"
#include "musb_core.h"
#include "musb_host.h"
#include "musb_gadget.h"
return *musbp;
}
-
-#if CONFIG_IS_ENABLED(DM_USB)
-struct usb_device *usb_dev_get_parent(struct usb_device *udev)
-{
- struct udevice *parent = udev->dev->parent;
-
- /*
- * When called from usb-uclass.c: usb_scan_device() udev->dev points
- * to the parent udevice, not the actual udevice belonging to the
- * udev as the device is not instantiated yet.
- *
- * If dev is an usb-bus, then we are called from usb_scan_device() for
- * an usb-device plugged directly into the root port, return NULL.
- */
- if (device_get_uclass_id(udev->dev) == UCLASS_USB)
- return NULL;
-
- /*
- * If these 2 are not the same we are being called from
- * usb_scan_device() and udev itself is the parent.
- */
- if (dev_get_parent_priv(udev->dev) != udev)
- return udev;
-
- /* We are being called normally, use the parent pointer */
- if (device_get_uclass_id(parent) == UCLASS_USB_HUB)
- return dev_get_parent_priv(parent);
-
- return NULL;
-}
-#else
-struct usb_device *usb_dev_get_parent(struct usb_device *udev)
-{
- return udev->parent;
-}
-#endif
#define __MUSB_UBOOT_H__
#include <usb.h>
+#include <linux/usb/usb_urb_compat.h>
#include "linux-compat.h"
-#include "usb-compat.h"
#include "musb_core.h"
struct musb_host_data {
+++ /dev/null
-#ifndef __USB_COMPAT_H__
-#define __USB_COMPAT_H__
-
-#include "usb.h"
-
-struct udevice;
-
-struct usb_hcd {
- void *hcd_priv;
-};
-
-struct usb_host_endpoint {
- struct usb_endpoint_descriptor desc;
- struct list_head urb_list;
- void *hcpriv;
-};
-
-/*
- * urb->transfer_flags:
- *
- * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
- */
-#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
-#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
-
-struct urb;
-
-typedef void (*usb_complete_t)(struct urb *);
-
-struct urb {
- void *hcpriv; /* private data for host controller */
- struct list_head urb_list; /* list head for use by the urb's
- * current owner */
- struct usb_device *dev; /* (in) pointer to associated device */
- struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */
- unsigned int pipe; /* (in) pipe information */
- int status; /* (return) non-ISO status */
- unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
- void *transfer_buffer; /* (in) associated data buffer */
- dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
- u32 transfer_buffer_length; /* (in) data buffer length */
- u32 actual_length; /* (return) actual transfer length */
- unsigned char *setup_packet; /* (in) setup packet (control only) */
- int start_frame; /* (modify) start frame (ISO) */
- usb_complete_t complete; /* (in) completion routine */
-};
-
-#define usb_hcd_link_urb_to_ep(hcd, urb) ({ \
- int ret = 0; \
- list_add_tail(&urb->urb_list, &urb->ep->urb_list); \
- ret; })
-#define usb_hcd_unlink_urb_from_ep(hcd, urb) list_del_init(&urb->urb_list)
-#define usb_hcd_check_unlink_urb(hdc, urb, status) 0
-
-static inline void usb_hcd_giveback_urb(struct usb_hcd *hcd,
- struct urb *urb,
- int status)
-{
- urb->status = status;
- if (urb->complete)
- urb->complete(urb);
-}
-
-static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
- struct urb *urb)
-{
- /* TODO: add cache invalidation here */
- return 0;
-}
-
-/**
- * usb_dev_get_parent() - Get the parent of a USB device
- *
- * @udev: USB struct containing information about the device
- * Return: associated device for which udev == dev_get_parent_priv(dev)
- */
-struct usb_device *usb_dev_get_parent(struct usb_device *udev);
-
-#endif /* __USB_COMPAT_H__ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __USB_URB_COMPAT_H__
+#define __USB_URB_COMPAT_H__
+
+#include <linux/compat.h>
+#include <usb.h>
+
+struct udevice;
+struct urb;
+struct usb_hcd;
+
+struct usb_urb_ops {
+ int (*urb_enqueue)(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+ int (*urb_dequeue)(struct usb_hcd *hcd, struct urb *urb, int status);
+ int (*hub_control)(struct usb_hcd *hcd, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int len,
+ struct devrequest *setup);
+ irqreturn_t (*isr)(int irq, void *priv);
+};
+
+struct usb_hcd {
+ void *hcd_priv;
+ const struct usb_urb_ops *urb_ops;
+};
+
+struct usb_host_endpoint {
+ struct usb_endpoint_descriptor desc;
+ struct list_head urb_list;
+ void *hcpriv;
+};
+
+/*
+ * urb->transfer_flags:
+ *
+ * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
+ */
+#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
+#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
+
+typedef void (*usb_complete_t)(struct urb *);
+
+struct urb {
+ void *hcpriv; /* private data for host controller */
+ struct list_head urb_list; /* list head for use by the urb's
+ * current owner */
+ struct usb_device *dev; /* (in) pointer to associated device */
+ struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */
+ unsigned int pipe; /* (in) pipe information */
+ int status; /* (return) non-ISO status */
+ unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
+ void *transfer_buffer; /* (in) associated data buffer */
+ dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
+ u32 transfer_buffer_length; /* (in) data buffer length */
+ u32 actual_length; /* (return) actual transfer length */
+ unsigned char *setup_packet; /* (in) setup packet (control only) */
+ int start_frame; /* (modify) start frame (ISO) */
+ usb_complete_t complete; /* (in) completion routine */
+};
+
+#define usb_hcd_link_urb_to_ep(hcd, urb) ({ \
+ int ret = 0; \
+ list_add_tail(&urb->urb_list, &urb->ep->urb_list); \
+ ret; })
+#define usb_hcd_unlink_urb_from_ep(hcd, urb) list_del_init(&urb->urb_list)
+#define usb_hcd_check_unlink_urb(hdc, urb, status) 0
+
+static inline void usb_hcd_giveback_urb(struct usb_hcd *hcd,
+ struct urb *urb,
+ int status)
+{
+ urb->status = status;
+ if (urb->complete)
+ urb->complete(urb);
+}
+
+static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
+ struct urb *urb)
+{
+ /* TODO: add cache invalidation here */
+ return 0;
+}
+
+/**
+ * usb_dev_get_parent() - Get the parent of a USB device
+ *
+ * @udev: USB struct containing information about the device
+ * Return: associated device for which udev == dev_get_parent_priv(dev)
+ */
+struct usb_device *usb_dev_get_parent(struct usb_device *udev);
+
+int usb_urb_submit_control(struct usb_hcd *hcd, struct urb *urb,
+ struct usb_host_endpoint *hep,
+ struct usb_device *dev, unsigned long pipe,
+ void *buffer, int len, struct devrequest *setup,
+ int interval, enum usb_device_speed speed);
+
+int usb_urb_submit_bulk(struct usb_hcd *hcd, struct urb *urb,
+ struct usb_host_endpoint *hep, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int len);
+
+int usb_urb_submit_irq(struct usb_hcd *hcd, struct urb *urb,
+ struct usb_host_endpoint *hep, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int len, int interval);
+
+void usb_urb_fill(struct urb *urb, struct usb_host_endpoint *hep,
+ struct usb_device *dev, int endpoint_type,
+ unsigned long pipe, void *buffer, int len,
+ struct devrequest *setup, int interval);
+
+int usb_urb_submit(struct usb_hcd *hcd, struct urb *urb);
+
+#endif /* __USB_COMPAT_H__ */
#define EndpointOutRequest \
((USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8)
+/* class requests from the USB 2.0 hub spec, table 11-15 */
+#define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
+/* GetBusState and SetHubDescriptor are optional, omitted */
+#define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, \
+ USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
+ USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, \
+ USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, \
+ USB_REQ_GET_STATUS)
+#define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, \
+ USB_REQ_GET_STATUS)
+#define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, \
+ USB_REQ_SET_FEATURE)
+#define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
+ USB_REQ_SET_FEATURE)
+#define ClearTTBuffer HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
+ HUB_CLEAR_TT_BUFFER)
+#define ResetTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
+ HUB_RESET_TT)
+#define GetTTState HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, \
+ HUB_GET_TT_STATE)
+#define StopTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, \
+ HUB_STOP_TT)
+
/* Descriptor types */
#define USB_DT_DEVICE 0x01
#define USB_DT_CONFIG 0x02
#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080
/* wHubCharacteristics (masks) */
+#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
+#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
+#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */
#define HUB_CHAR_LPSM 0x0003
#define HUB_CHAR_COMPOUND 0x0004
+#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
+#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */
#define HUB_CHAR_OCPM 0x0018
#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
+#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */
/*
* Hub Status & Hub Change bit masks
projects / uboot.git / commitdiff