usb: dwc3: core: add support for disabling SS instances in park mode

usb: dwc3: core: add support for disabling SS instances in park mode

[ Upstream commit ea92fb7c7c26d913167054112de6895c5ba3db3e ]

In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
 xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
 hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
 xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
 usb 2-1.1-port1: cannot reset (err = -22)

Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"

Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.

CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>